English dropdown-ico

Manual Wolf W302210I

24 pages 1.42 mb
Download

Go to site of 24

Summary
  • Wolf W302210I - page 1

    I NST ALLA TION I NSTR UCTIONS P RO W ALL V ENTILA TION H OODS ...

  • Wolf W302210I - page 2

    As you follow these instructions, you will notice W ARNING and CAUTION symbols. This blocked information is important for the safe and efficient installation of Wolf equip- ment. There are two types of potential hazards that may occur during installation. Another footnote we would like to identify is IMPORT ANT NOTE: This highlights informa- tion t ...

  • Wolf W302210I - page 3

    3 INST ALLA TION REQUIREMENTS IMPORT ANT NOTE: This installation must be completed by a qualified installer or W olf authorized service center technician. Installer: Please read the entire Installation Instructions prior to installation. Save these instructions for the local inspector’ s refer- ence, then leave them with the homeowner . Homeowner ...

  • Wolf W302210I - page 4

    4 W OLF PRO W ALL VENTILA TION HOODS IMPORT ANT NOTE: W olf recommends that the Pro wall ventilation hood be installed 30" (762) to 36" (914) above the countertop. Rail option (R) wall hoods come with a classic stainless steel decorative rail and stand-offs. Optional platinum or brass rails are available to match W olf dual fuel range bez ...

  • Wolf W302210I - page 5

    5 Dimensions in parentheses are in millimeters unless otherwise specified. INST ALLA TION INSTRUCTIONS 10" (254) O VERALL HEIGHT O VERALL WIDTH 4" (102) 22" (559) O VERALL DEPTH 12" (305) 2" (51) 3 / 4 " (19) DIAMETER OF RAIL O VERALL WIDTH 4" (102) 24" (610) O VERALL DEPTH 12" (305) 18" (457) O VER ...

  • Wolf W302210I - page 6

    6 W OLF PRO W ALL VENTILA TION HOODS 30" TO 36" (762 –914) TO COUNTER T OP 30" TO 36" (762 –914) TO COUNTER T OP 10" (254) 18" (457) HEIGHT OF HOOD 22" (559) 24" (610) DEPTH OF HOOD WIDTH OF HOOD NOTE: Low-profile and 24" (610) deep wall hoods have a v ertical or hor izontal discharge; discharge dire ...

  • Wolf W302210I - page 7

    7 Dimensions in parentheses are in millimeters unless otherwise specified. INST ALLA TION INSTRUCTIONS INST ALLA TION SPECIFICA TIONS The following chart provides dimensions specific to each wall hood model. These dimensions are critical for proper installation. Also refer to the illustration below . Low-Profile Wall Hoods Model (A) (B) (C) (D) W30 ...

  • Wolf W302210I - page 8

    8 LO W -PROFILE AND 24" (610) HOODS STEP 1: INST ALL DUCTW ORK IMPORT ANT NOTE: W olf recommends that the Pro wall ventilation hood be installed 30" (762) to 36" (914) above the countertop. IMPORT ANT NOTE: Consult a qualified HV AC Engineer for specific ducting applications. IMPORT ANT NOTE: All W olf Pro wall hoods must exhaust to ...

  • Wolf W302210I - page 9

    LO W -PROFILE AND 24" (610) HOODS Always install a roof or wall cap if you are not installing a remote blower . Connect 8" (203) round metal ductwork for low-profile hoods or 10" (254) round metal ductwork for 24" (610) deep hoods to the cap and work back towards the hood. Use duct sealing tape on joints between ductwork section ...

  • Wolf W302210I - page 10

    10 W OLF PRO W ALL VENTILA TION HOODS A CCESSORIES Optional acces- sories are available through your Wolf dealer . T o obtain local dealer information, visit the Locator section of our website, wolfappliance.com. LO W -PROFILE AND 24" (610) HOODS STEP 2: W ALL PREP ARA TION Construct the wood wall framing flush with the wall studs and centered ...

  • Wolf W302210I - page 11

    11 Dimensions in parentheses are in millimeters unless otherwise specified. INST ALLA TION INSTRUCTIONS 17 " (432) 8" (203) W all Cut-Out Area Hood Centerline 4 1 /2 " (114) 4 11 /16 " (119) 4" (102) T ransition Centerline Wall cut-out for low-profile hoods – horizontal discharge 21" (533) W all Cut-Out Area Hood Cen ...

  • Wolf W302210I - page 12

    12 W OLF PRO W ALL VENTILA TION HOODS Rough-In Plate Mounting Holes Soffit Hood installation LO W -PROFILE AND 24" (610) HOODS STEP 5: INST ALL THE HOOD IMPORT ANT NOTE: If a backsplash is to be used, it should be installed before the wall hood is mounted. Align the hood assembly with the marked location. Install the #10 x 2" (59) screws ...

  • Wolf W302210I - page 13

    13 Dimensions in parentheses are in millimeters unless otherwise specified. INST ALLA TION INSTRUCTIONS 30" TO 36" (762 –914) COUNTERT OP TO BO TT OM OF VENTILA TION HOOD 18" (457) HEIGHT OF HOOD W ALL HOOD DUCTWORK INST ALLA TION THROUGH ROOF 36" (914) ST ANDARD FLOOR TO COUNTERT OP HEIGHT 27" (686) DEPTH OF HOOD 10" ...

  • Wolf W302210I - page 14

    The hood assembly is shipped with the rough-in plate / transition attached. The transition is shipped upside down in the top of the hood. It must be removed and rein- stalled in the proper position. Remove the filters by pushing each filter up at the angle it is placed in, and rotate down. Remove the center filter first. Then take out the grease cu ...

  • Wolf W302210I - page 15

    15 Dimensions in parentheses are in millimeters unless otherwise specified. INST ALLA TION INSTRUCTIONS Rough-In Plate Soffit Mounting Holes Hood installation 27" (686) DEEP W ALL HOODS If you are installing WBLOWER-90INT or WBLOWER-120INT , refer to the internal blower information on page 17 and follow installation instructions provided with ...

  • Wolf W302210I - page 16

    Remove the electrical box cover from the rough-in plate. Connect black wire to power supply black wire, white wire to power supply white wire and green wire to green wire or bare wire. Place all wiring connections inside the elec- trical box and reinstall on the rough-in plate in the upper right-hand corner . Make sure that the wires are secure and ...

  • Wolf W302210I - page 17

    17 Dimensions in parentheses are in millimeters unless otherwise specified. INST ALLA TION INSTRUCTIONS INTERNAL BLO WERS IMPORT ANT NOTE: Refer to the specific installation instructions provided with each internal blower for additional mounting and wiring instructions. IMPORT ANT NOTE: Use wire connectors or wire nuts approved by UL or C/UL. IMPOR ...

  • Wolf W302210I - page 18

    18 W OLF PRO W ALL VENTILA TION HOODS A CCESSORIES Optional acces- sories are available through your Wolf dealer . T o obtain local dealer information, visit the Locator section of our website, wolfappliance.com. 11 3 / 4 " (298) 21 1 / 2 " (546) 24 3 / 8 " (619) 18 1 / 2 " (470) 12 1 / 4 " (311) 4 1 / 2 " (114) IN-LIN ...

  • Wolf W302210I - page 19

    19 Dimensions in parentheses are in millimeters unless otherwise specified. INST ALLA TION INSTRUCTIONS IN-LINE AND REMO TE BLO WERS BLO WER WIRING IMPORT ANT NOTE: Refer to the specific installation instructions provided with each blower for additional wiring instructions. Follow wiring instructions at the blower as outlined in the specific instal ...

  • Wolf W302210I - page 20

    20 W OLF PRO W ALL VENTILA TION HOODS REMO TE BLOWERS BLOWER-60REM (801640) – 600 CFM remote blower for low-profile wall hoods (except Models W302210I and W362210I), and Models W302418 and W302718. BLOWER-90REM (801641) – 900 CFM remote blower for low-profile wall hoods (except Models W302210I and W362210I), and 24" (610) and 27" (686 ...

  • Wolf W302210I - page 21

    21 Dimensions in parentheses are in millimeters unless otherwise specified. INST ALLA TION INSTRUCTIONS A CCESSORIES Optional acces- sories are available through your Wolf dealer . T o obtain local dealer information, visit the Locator section of our website, wolfappliance.com. INST ALL FIL TERS / GREASE CUPS Remove all packaging material from the ...

  • Wolf W302210I - page 22

    22 CONT ACT INFORMA TION Wolf Customer Service: 800-332-9513 Website: wolfappliance.com TROUBLE SHOO TING IMPORT ANT NOTE: If the Pro wall ventilation hood does not operate properly , follow these troubleshooting steps: V erify that power is being supplied to the ventilation hood. Check electrical connections to ensure that the installation has bee ...

  • Wolf W302210I - page 23

    23 CUT -OUT FOR LOGO PLACEMENT BO TT OM EDGE OF HOOD FOLD LINE FOR LOGO PLACEMENT LEFT OUTER EDGE OF HOOD ...

  • Wolf W302210I - page 24

    809340 7 / 2006 WOLF APPLIANCE COMP ANY , INC. P . O. BO X 44848 MADISON, WI 53744 800-332-9513 W OLF APPLIANCE.COM ...

Manufacturer Wolf Category Ventilation Hood

Documents that we receive from a manufacturer of a Wolf W302210I can be divided into several groups. They are, among others:
- Wolf technical drawings
- W302210I manuals
- Wolf product data sheets
- information booklets
- or energy labels Wolf W302210I
All of them are important, but the most important information from the point of view of use of the device are in the user manual Wolf W302210I.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Wolf W302210I, service manual, brief instructions and user manuals Wolf W302210I. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Wolf W302210I.

Similar manuals

A complete manual for the device Wolf W302210I, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Wolf W302210I by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Wolf W302210I.

A complete Wolf manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Wolf W302210I - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Wolf W302210I, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Wolf W302210I, that we can find in the current document
3. Tips how to use the basic functions of the device Wolf W302210I - which should help us in our first steps of using Wolf W302210I
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Wolf W302210I
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Wolf W302210I in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Wolf W302210I?

Use the form below

If you did not solve your problem by using a manual Wolf W302210I, ask a question using the form below. If a user had a similar problem with Wolf W302210I it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)