English dropdown-ico

Manual Altinex MX2416RM

14 pages 3.06 mb
Download

Go to site of 14

Summary
  • Altinex MX2416RM - page 1

    SWITCHERS MANUAL PART NUMBER: 400-0020-003 PRODUCT REVISION: 0 MX2416RM/MX2414RM 6/(4) - IN, 1 - OUT VGA/MAC SWITCHER USER’S GUIDE ...

  • Altinex MX2416RM - page 2

    SWITCHERS 1 INTRODUCTION Thank you for purchasing the MX2416RM Switcher. We are sure you will find it a reliable and useful product. Superior performance for the right price backed by solid technical and customer support is what we have to offer. The product you are holding in your hands is designed using state-of-the-art technology and is superior ...

  • Altinex MX2416RM - page 3

    SWITCHERS 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MX4216RM Switcher. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MX2416RM and to prevent fire and shock hazard. Please read them carefully and heed all warnings. 1.1 GENERAL • Unauthorized pe ...

  • Altinex MX2416RM - page 4

    SWITCHERS 3 ABOUT YOUR SWITCHER 2 The MX2416RM is a 6-in 1-out relay switcher designed to allow the non-simultaneous connection of up to six PC or six MAC computer video sources to a single monitor or projector. The MX2416RM is controllable using its built-in front panel, through RS-232, or through contact closures. Contact closure control requires ...

  • Altinex MX2416RM - page 5

    SWITCHERS 4 Sync on Green -0.3V Impedance pass-through Frequency Compatibility Typical Video Bandwidth 400 MHz @ -3 dB Horizontal 15-200 kHz Vertical 30-190 Hz Cross-talk -48dB @ 10 MHz Coupling DC Power External Power Adapter 90-140V/200-240V Power Consumption 12 watts max. Table 3. MX2416RM/MX2414RM Electrical DESCRIPTION OF MX2416RM 4 ...

  • Altinex MX2416RM - page 6

    SWITCHERS 5 The front panel of the MX2416RM provides access to essentially all of the switcher’s capabilities. In addition to standard switching functions, the unit has control and switching functions that could be very useful in a variety of special applications. 4.1 SELECT INPUT When buttons 1 through 6 are pressed, the corresponding INPUT will ...

  • Altinex MX2416RM - page 7

    SWITCHERS 6 4.6 POWER UP DEFAULT SET This function allows a user to select the channel that will be ON at power up. To select the default channel press the selected channel switch and hold it for approximately 2 seconds until you hear a beeping sound. If the unit is turned off and turned back on, the LED of the selected channel should light. 4.7 AN ...

  • Altinex MX2416RM - page 8

    SWITCHERS 7 INSTALLING YOUR SWITCHER 6 Step 1 . Make sure that the power input is set to the proper AC voltage in your country. An incorrect setting can result in unit damage not covered by warranty. Step 2. Connect the power cord to the unit and plug it into the power outlet. Step 3. Connect the cables from the video sources (computers) to the inp ...

  • Altinex MX2416RM - page 9

    SWITCHERS 8 IBM PIN No. MX2416RM PIN No. 2 2 3 3 5 5 Connection IBM-PC 9-pin D to MX2416RM 9-pin D Note: 4, 6, 8 shorted together in IBM side only. Port setting preferences for the control system or computer being used to control the switcher should be set as follows: BAUD RATE (Bits per second) 2400 Data bits 8 Parity None Stop Bits 1 There is no ...

  • Altinex MX2416RM - page 10

    SWITCHERS 9 [ OUTmm] This command sets the switcher to respond to specific output only. The default setting is output 1. [SETxnnmm] x - select input number nn - Minimum input number mm - Maximum input number This command is designed to allow the MX2416RM to program each input to respond to a selected range of input commands. For example, if command ...

  • Altinex MX2416RM - page 11

    SWITCHERS 10 accommodate this need. The pin-outs for this adapter are as follows: 9 pin “D” Male Description 9 pin “D” Female Input 7 1.2K 1 1 7 3.3K 2 2 7 6.8K 3 3 7 12K 4 4 7 22K 5 5 7 51K 6 6 7 0 short 7 NONE 5 Ground 9 The following voltages apply for selecting the required channel: Input number min. (V) nom. (V) max. (V) 1 0.35 0.55 0. ...

  • Altinex MX2416RM - page 12

    SWITCHERS 11 This will setup each switcher as a different output number. To control the switchers use following commands (connect the transmit line from the control system to the receive line on both switchers): [I01O01] Select input number 1 [I02O01] Select input number 2 [I03O01] Select input number 3 [I04O01] Select input number 4 [I05O01] Selec ...

  • Altinex MX2416RM - page 13

    SWITCHERS 12 CB36100MR 100 feet MAC Male to Female CB36150MR 150 feet MAC Male to Female POWER CABLES PC5301US Power cable for US PC5302US Power cable for U.K. PC5303US Power cable for Australia PC5304US Power cable for Germany FREQUENTLY ASKED QUESTIONS 9 No Question Answer 1 When I press F1 nothing happens. What is a purpose of this function? The ...

  • Altinex MX2416RM - page 14

    SWITCHERS 13 2. SYNC is less than 1.0 V and more than 0.3 V. • Please use the appropriate input voltage 110 VAC or 220 VAC. • Please make sure that the proper quality of cables is used. We recommended Altinex made cables for the best results. • If a problem shows up after continuous usage at higher voltage, higher temperature, higher humidity ...

Manufacturer Altinex Category Switch

Documents that we receive from a manufacturer of a Altinex MX2416RM can be divided into several groups. They are, among others:
- Altinex technical drawings
- MX2416RM manuals
- Altinex product data sheets
- information booklets
- or energy labels Altinex MX2416RM
All of them are important, but the most important information from the point of view of use of the device are in the user manual Altinex MX2416RM.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Altinex MX2416RM, service manual, brief instructions and user manuals Altinex MX2416RM. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Altinex MX2416RM.

Similar manuals

A complete manual for the device Altinex MX2416RM, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Altinex MX2416RM by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Altinex MX2416RM.

A complete Altinex manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Altinex MX2416RM - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Altinex MX2416RM, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Altinex MX2416RM, that we can find in the current document
3. Tips how to use the basic functions of the device Altinex MX2416RM - which should help us in our first steps of using Altinex MX2416RM
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Altinex MX2416RM
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Altinex MX2416RM in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Altinex MX2416RM?

Use the form below

If you did not solve your problem by using a manual Altinex MX2416RM, ask a question using the form below. If a user had a similar problem with Altinex MX2416RM it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)