Manual Newcon Optik NVS 14-3GCS

32 pages 0.87 mb
Download

Go to site of 32

Summary
  • Newcon Optik NVS 14-3GCS - page 1

    Operation Manual NVS 14 Series NIGHT VISION MONOCULAR NVS 14-3XT, NVS 14-3GCS, NVS 14-3AG, NVS 14-3AGBW 105 Spar ks Ave., Toro nto, ON, M 2H 2S5, Canada ...

  • Newcon Optik NVS 14-3GCS - page 2

    ii This page was intentionally left blank ...

  • Newcon Optik NVS 14-3GCS - page 3

    iii IMPORTANT INFORMATION Read prior to activa tion. You have pu rchased a so phisti cated electronic device. To operate it properly, please read this manual carefully. Ignoring the operation procedures described in this m anual will void your warranty .  NEVER disass emble the U nit. This de vice contai ns a sourc e of high voltage, which may b ...

  • Newcon Optik NVS 14-3GCS - page 4

    iv Precautions All NVS 14 series devices a re sophisticated electro-optical instruments. They should be handled with du e care:  Each Unit contai ns fragile co mponents. A void har d impacts, dust, mois ture and abrupt changes of temperat ure.  Do not touch the optical surfaces other tha n for cleaning with an appropriate lens cleaning kit. D ...

  • Newcon Optik NVS 14-3GCS - page 5

    1 TABLE OF CONTENTS 1.  OVERVIE W .................................................................... 3  2.  STANDARD DEL IVERY SET ....................................... 5  2.1  Optional accesso ries .............................................. 5  3.  SPECIFICATION S ........................................................ ...

  • Newcon Optik NVS 14-3GCS - page 6

    2 6.  TROUBLESH OOTING ................................................. 21  No green (or black a n d white) image visible .................. 21  Image is unclear ............................................................. 21  Image flashes .................................................................. 21  Condensation accumula ...

  • Newcon Optik NVS 14-3GCS - page 7

    3 1. OVERVIEW Your NVS 14 series device (the “Unit”) is an opt oelectronic monocular, int ended for observation of ob jects and orient ation at night or unde r dark conditi ons. The Unit is equi pped with a Generation 3 (“Gen 3”) image intensifier tube (“IIT”), which amplifies low light, such as moon light, starlight or man-made light. ...

  • Newcon Optik NVS 14-3GCS - page 8

    4 Features  Flip-up mechanism provides fo r unob structed vision w hen the Unit is m ounted on headgear or helmet;  Built-in infrared illuminator en ab les observation in total darkness (i.e. basem ent, cave or dark room);  Optional NV S H Mount (helmet mount) all ows for effective combat operations;  Optional weap on mount converts U n ...

  • Newcon Optik NVS 14-3GCS - page 9

    5 2. STANDARD DELIVERY SET QUANTITY NVS 14 Series Unit 1 Head Harness 1 NVS Arm Mount 1 Objective Lens Cap 1 Operation Manual 1 Lens Cleaning Kit 1 AA battery 1 2.1 Optional acce ssories US-style cli p mount Demist shie ld Sacrificial w indow 3x add-on lens 5x add-on lens Weapon m ount NVS Bridge Hard case Lens brush Camera / video adapter NVS H Mo ...

  • Newcon Optik NVS 14-3GCS - page 10

    6 3. SPECIFICATIONS Model 3XT 3GCS 3AG 3AGBW IIT G ener ation Gen 3 Photocathode Material Ga llium Arsenide (GaAs) Image Colour Green Black & White Photocathode Diameter 17.5mm Minimum Photocathode Sensitivity 1800 µ A/lm 1 190 mA/W 2 Luminous Gain 40,000 – 70,000 fL/fc 3 10,000 – 20,000 fL/fc 4 Auto-gating X   Minimum Resolution 5 6 ...

  • Newcon Optik NVS 14-3GCS - page 11

    7 Power supply 1x 3V CR-123 Lithium battery OR 1x 1.5 V AA Alkaline or lithium battery Maximum Current Consumption 25 mA Voltage 2.8  0.8 Battery life 20 hours with I/R 40 hours without I/R Dimensions 118x48x69mm Weight 300g Operating Temperature Range -50 to +55 °C MTBF 10,000 hours Modulation Transfer Function @2.5 lp/mm 92% @7.5 lp/mm 80% @1 ...

  • Newcon Optik NVS 14-3GCS - page 12

    8 4. UNIT DESIGN 1. On/Off/IR/Auto switch 2. Objective lens cap 3. Objective lens 4. Eyep iece wit h eyecup 5. Housing 6. Battery compartment cover and battery selection bushing 7. Battery compartment 8. Dovetail platform 9. Manual gain adjustment knob FIGURE 1 1 2 7 6 9 4 5 8 3 ...

  • Newcon Optik NVS 14-3GCS - page 13

    9 5. OPERATION INSTRUCTIONS Installing battery Unit is supplied without a battery installed. Prior to installing the ba ttery, make sure the On/Off/IR/Auto switch (1, Fig.1) is in the OFF position and the objec tive lens cap is on. The Unit can operate on either a single AA or CR-123 lithium battery. Lithi um batteries hold a c harge longer than c ...

  • Newcon Optik NVS 14-3GCS - page 14

    10 FIGURE 2 IR illuminator indicator (red, left), Low battery indicator (yellow, right) the screen is not lit ensure the batteries installed are cha rged and the polarity is correct . When the Unit is ON you m ay see a red and/or yellow LED indicator in the field of view (F ig. 2). When the yellow or red LED indicat ors are flashing, the remain ing ...

  • Newcon Optik NVS 14-3GCS - page 15

    11 Switching the Unit off After you have finished using the Unit, turn it off by rotating the On/Off/IR/Auto switch to the ‘OFF’ position. Replace the objective lens cap. If storing the un it for an extended period, remove batteries. Place Unit in appropriate storage contai ner. Adjusting to i ndividual vi sion Turn on the Unit. Dir ect the Uni ...

  • Newcon Optik NVS 14-3GCS - page 16

    12 Auto shut OFF at brig ht light Each unit has a built-in high lig ht sensor located near the IR illuminator (2, Fig. 1). This se ns or shuts the m onocular off after about 45 seconds of exposu re to light exceedin g 10 -1 lux. To reset the monocular switch it off and then back on as described in 6. 3 and 6.2. High-light shut-off feature does no t ...

  • Newcon Optik NVS 14-3GCS - page 17

    13 FIGURE 3 1. “Swing arm” mount 2. Grooved pad 3. Locking knob 4. Unit groove 5. Flip button 6. US clip mount Using the Unit with headge ar or helmet The Unit is supplied with headgear design ed to allow the mounting of the Unit on the head . Prior to using the headgear adjust its straps so that the headg ear fits the head comfortably but firm ...

  • Newcon Optik NVS 14-3GCS - page 18

    14 To set comfortable eye-relief (the distance between your ey e and the eyepiece), loosen tightening sc rew on the headgear and move the Unit, then tighten the locking screw. To use the Unit with PASGT head and helmet mount u nscrew the groove d pad (2 , Fig. 3) f rom the swi ng arm mount and screw on the US type clip (6, Fig. 3) using four screws ...

  • Newcon Optik NVS 14-3GCS - page 19

    15 5.2 Install ation of ad d-on lenses. Always ensu re that th e Unit is switched off when adding or removing an objective lens. To attach the afocal 3x add-on lens to th e Unit, turn off the monocular. Re move the objective lens cap. Press the 3x l ens firmly towards the eyepiece. Do not app ly excessive pressure. Make sure that the lens is fixed ...

  • Newcon Optik NVS 14-3GCS - page 20

    16 3. To detach t he current lens: hold the lens by it s base and rotate it counter-clockwise. Once the lens has been removed, store it in a safe, clean space. 4. To attach desired lens: rotate it clockwise along the threading un til snug—do not o vertighten. The threads ar e very fine (to preve nt humidity penetratio n) and can be damaged easily ...

  • Newcon Optik NVS 14-3GCS - page 21

    17 Using the camera / video adap ter Before using the (optional) adapter, remove the rubber eyepiece carefully. The adapter (Fig. 5) consists of 2 rings: a) Camera ada pter is 52x0.75m m. It fits the filter lens thread of various cameras, e.g. Nikon. b) Video a dapter is 37x0.75m m. It fits Sony cam eras and some others. If our adapte r does not fi ...

  • Newcon Optik NVS 14-3GCS - page 22

    18 FIGURE 6. Helmet m ount 1. Locking screw 2. Flip-up button 3. Flip-up adjusting screws 4. Mount binding screw 1 2 3 4 find the suitable starting po int. Tighten the screws after completing the adjustment. You can raise the Unit for u nobstructed view without taking the helmet off . To do so press (an d hold) t he flip-up button (2, Fig. 6) and r ...

  • Newcon Optik NVS 14-3GCS - page 23

    19 The NVS W Mount is affixed to the Unit and the Picatinny rail using oversize d, easy to tig hten screws. The NVS QR Mount is a ‘quick release’ mount that utili zed a lever for affi xing to and removing f rom the Picati nny rail . Using with a daytime riflescope Although the Unit d oes not contain a reticle and thus canno t be used as a s tan ...

  • Newcon Optik NVS 14-3GCS - page 24

    20 FIGURE 11. Goggles configuration FIGURE 12. Binoculars configuration In the dual configuration the interpupillary distance can b e adjusted betwee n 58 and 72 mm. ...

  • Newcon Optik NVS 14-3GCS - page 25

    21 6. TROUBLESHOOTING No green (or black and white) image visible Check that the batteries are in stalled properly and are full charged. Wrongly instal led and expe nded batteries are the most common problems leading users to believe their Unit is defective. Image is unclear Check if the lenses are foggy or dusty. Clean them if necessary. If the im ...

  • Newcon Optik NVS 14-3GCS - page 26

    22 Visibility decreased or disappeared Bright light sources (t he Moon, projectors or hea dlights) m ay cause visibility to d egrade or even co mpletely disappear. Move the device away from the light source immediately. The image will be restored within two minutes. Adverse atmospheric c onditions su ch as fog, haze or extremely dark environments w ...

  • Newcon Optik NVS 14-3GCS - page 27

    23 7. WARRANTY Newcon Optik warrants this produ ct against defects in materials and workmanship for one year from the date of th e original purchase. Lon ger warrant y is ava ilable, subject to the terms of the specific sales contract. Should your Newco n Optik product prove to be de fective during this period, please delive r the product securel y ...

  • Newcon Optik NVS 14-3GCS - page 28

    24 8. CUSTOMER SUPPORT Should you experience an y difficulties with your Newcon Optik product, consult this manual first. If the pro blem rem ains, contact our custom er support departm ent at +1 (416) 663-6963 or to ll free at 1-8 77-368-6666 (Nor th America only). Our op erating hours ar e 0900h to 1700h Eastern Standard Tim e , Monday thr ough F ...

  • Newcon Optik NVS 14-3GCS - page 29

    25 9. ACCEPTANCE CERTIFICATE Image Intensifier Tub e serial number: ____________ _________ Characteristic Minimum Measured Resolution, lp/mm 64 Photocathode sensitiv ity, integral,  A/lm (@2856°K ) 1800 Light amplification fL/fc (@2x10-6 fc) 40,000 Date of production :____________ _______________ _______ Quality Inspector: _____ _______________ ...

  • Newcon Optik NVS 14-3GCS - page 30

    26 NIGHT VISIO N DEVICE NVS 14-3XT NVS 14-3AG BW NVS 14-3AG Other: Unit serial number: _ _____________ _______________ ____ This Unit complies with all technical sp ecifications and has passed Newcon Opti k’s inspec tion procedu res. Date of production : _______________ _______________ ___ Quality Inspector’s signature: __________ _____________ ...

  • Newcon Optik NVS 14-3GCS - page 31

    27 This page was intentionally left blank ...

  • Newcon Optik NVS 14-3GCS - page 32

    NEWCON OPTIK  Printed in Canada R1.NVM– 04.13 ...

Manufacturer Newcon Optik Category Hunting Equipment

Documents that we receive from a manufacturer of a Newcon Optik NVS 14-3GCS can be divided into several groups. They are, among others:
- Newcon Optik technical drawings
- NVS 14-3GCS manuals
- Newcon Optik product data sheets
- information booklets
- or energy labels Newcon Optik NVS 14-3GCS
All of them are important, but the most important information from the point of view of use of the device are in the user manual Newcon Optik NVS 14-3GCS.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Newcon Optik NVS 14-3GCS, service manual, brief instructions and user manuals Newcon Optik NVS 14-3GCS. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Newcon Optik NVS 14-3GCS.

A complete manual for the device Newcon Optik NVS 14-3GCS, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Newcon Optik NVS 14-3GCS by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Newcon Optik NVS 14-3GCS.

A complete Newcon Optik manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Newcon Optik NVS 14-3GCS - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Newcon Optik NVS 14-3GCS, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Newcon Optik NVS 14-3GCS, that we can find in the current document
3. Tips how to use the basic functions of the device Newcon Optik NVS 14-3GCS - which should help us in our first steps of using Newcon Optik NVS 14-3GCS
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Newcon Optik NVS 14-3GCS
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Newcon Optik NVS 14-3GCS in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Newcon Optik NVS 14-3GCS?

Use the form below

If you did not solve your problem by using a manual Newcon Optik NVS 14-3GCS, ask a question using the form below. If a user had a similar problem with Newcon Optik NVS 14-3GCS it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)