English dropdown-ico

Manual Speco Technologies HTINTD8W

44 pages Not applicable
Download

Go to site of 44

Summary
  • Speco Technologies HTINTD8W - page 1

    INSTR UCTION MANU AL 650Line Intensier3™ Series Speco T echnologies is constantly de veloping pr oduct impr o vements. W e r eserve the right to modify pr oduct design and specifications without notice and without incurring any obligation. Re v. 6/20/2012 HT7246IHR / HT7247IHR / HT7250IHR (W eatherproof Dome Camera with Chameleon™ Cover) HTI ...

  • Speco Technologies HTINTD8W - page 2

    Contents 1 ◑  Contents ...................................................... 1 ◑  Precautions ................................................. 2, 3 ◑  Safety Instructions ...................................... 4 ◑  Package Contents ....................................... 5 ◑  Camera Installation .......................... ...

  • Speco Technologies HTINTD8W - page 3

    2 Precautions Do not install the camera in extreme temperature conditions. Do not touch the front lens of the camera. Never keep the camera pointed directly at strong light. Do not expose the camera to radioactivity . Do not install the camera under unstable lighting conditions. Do not drop the camera or subject it to physical shocks. Only use the ...

  • Speco Technologies HTINTD8W - page 4

    3 CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:T O REDUCE T HE RISK OF ELECTRIC SHOC K DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PA RT S INSIDE . REFER SER VICING T O QUALIFIED SER VICE PERSONNEL. ISO14001 CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:T O REDUCE T HE RISK OF ELECTRIC SHOC K DO NOT REMOVE COVER(OR BACK). NO USER ...

  • Speco Technologies HTINTD8W - page 5

    4 Safety Instructions Pr ecautions f or use Please handle this camer a car efully : ◑ This camera should be installed by qualied personnel only ◑ There are no user serviceable parts inside ◑ Do not disassemble this camera other than to make initial adjustments ◑ Use a UL approved regulated 24 volt AC or 12 volt DC power supply ◑ Use ap ...

  • Speco Technologies HTINTD8W - page 6

    5 Package Contents Please make sure that the following items are included in the Package: 1) HT7246IHR, HT7247IHR, HT7250IHR • 1 V ideo T est Connector , P ower J ack • 1 Chameleon Cover • 1 Wrench • Set Screw - 3 T apping Screws 4x40 - 3 Plastic Anchor 2) HTINTB8, HTINTB9, HTINTB10 • 1 V ideo T est Connector , P ower J ack • 1 Brack et ...

  • Speco Technologies HTINTD8W - page 7

    6 CAMERA INST ALLA TION jv uul j{ Gw v~ ly Gj hi sl G XU G~ ol uG |z pu nG XYG }v s{ zG kj GO    G    G WWG hP G YU G~ ol uG |z pu nG Y[G }v s{ zG hj GO [WG }  Gh  P ZU Gj v uul j{ G} pk lv Gj hi sl G Tj v uul j{ Gi uj Gj hi sl G{ vG {o lG iu jG qh jr UG [U Gj v uul j{ Gh   ...

  • Speco Technologies HTINTD8W - page 8

    7 CAMERA INST ALLA TION Compatibility 1) HT7246IHR, HT7247IHR, HT7250IHR 2) HTINTB8, HTINTB9, HTINTB10 INTWM CVCJBB INTPM INTJBS CVCJBD INTCM DFM ...

  • Speco Technologies HTINTD8W - page 9

    8 CAMERA INST ALLA TION Compatibility 3) HTINTD8, HTINTD9, HTINTD10 4) CVC6245IHR, CVC6246IHR INTWM DFM INTPM JB03TG ...

  • Speco Technologies HTINTD8W - page 10

    CAMERA INST ALLA TION 9 1. HT7246IHR / HT7247IHR / HT7250IHR CA UTION : The installation instructions in this manual are for use by qualified service personnel only . T o reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so . V ANDAL DOME BODY ASSEM ...

  • Speco Technologies HTINTD8W - page 11

    CAMERA INST ALLA TION 10 2. HTINTB8, HTINTB9, HTINTB10 CAMERA ASSEMBL Y HEXAGON SOCKET SCREW M5X10, 4EA T APPING SCREW 4X25, 4EA BASE ADAPTOR BRACKET ...

  • Speco Technologies HTINTD8W - page 12

    CAMERA INST ALLA TION 11 3. HTINTD8, HTINTD9, HTINTD10 DOME BASE HEXAGON SOCKET SCREW M6X20, 2EA DOME ASSEMBL Y DOME BODY T APPING SCREW 4X25, 3EA ...

  • Speco Technologies HTINTD8W - page 13

    CAMERA INST ALLA TION 12 4. HT647HR TP T APPING SCREW 3X40, 3EA BODY & DOME COVER ASSEMBL Y BASE & ROT A TE BRACKET ASSEMBL Y ...

  • Speco Technologies HTINTD8W - page 14

    CAMERA INST ALLA TION 13 5. CVC6245IHR, CVC6246IHR T APPING SCREW 4X20, 2EA DOME COVER ASSEMBL Y BASE ASSEMBL Y ...

  • Speco Technologies HTINTD8W - page 15

    14 SPECIFICATIONS 650 Line Intensifier3 (W eatherproof Dome Camera with Chameleon™ Cover) DC Auto Iris V arifocal Lens 2.8-12mm / 9-22mm / 5-50mm MODEL HT7246IHR / HT7247IHR / HT7250IHR 1/3” Sony Super HAD ll CCD NTSC, P AL NTSC=811(H) * 508(V) / P AL=795(H) * 596(V) NTSC=768(H) * 494(V) / P AL=752(H) * 582(V) NTSC=15.734KHz(H) & 59.94Hz(V) ...

  • Speco Technologies HTINTD8W - page 16

    15 650 Line Intensifier3 (W eatherproof Bullet Camera with mount plate) DC Auto Iris V arifocal Lens 2.8-12mm / 5-50mm / 9-22mm HTINTB8 / HTINTB8W (2.8-12mm) HTINTB9 / HTINTB9W (5-50mm) HTINTB10 / HTINTB10W (9-22mm) ■ ■ ■ SPECIFICATIONS MODEL HTINTB8 / HTINTB9 / HTINTB10 1/3” Sony Super HAD ll CCD NTSC, P AL NTSC=811(H) * 508(V) / P AL=795( ...

  • Speco Technologies HTINTD8W - page 17

    16 650 Line Intensifier3 (W eatherproof Dome Camera) DC Auto Iris V arifocal Lens 2.8-12mm / 5-50mm / 9-22mm HTINTD8 / HTINTD8W (2.8-12mm) HTINTD9 / HTINTD9W (5-50mm) HTINTD10 / HTINTD10W (9-22mm) ■ ■ ■ SPECIFICATIONS MODEL HTINTD8 / HTINTD9 / HTINTD10 1/3” Sony Super HAD ll CCD NTSC, P AL NTSC=811(H) * 508(V) / P AL=795(H) * 596(V) NTSC=76 ...

  • Speco Technologies HTINTD8W - page 18

    17 650 Line Intensifier3 (Miniature W eatherproof Dome Camera with Chameleon™ Cover) 3.6mm F ixed Board Lens HT647HRTP (3.6 F ixed Board Lens) ■ SPECIFICATIONS MODEL HT647HR TP 1/3” Sony Super HAD ll CCD NTSC, P AL NTSC=811(H) * 508(V) / P AL=795(H) * 596(V) NTSC=768(H) * 494(V) / P AL=752(H) * 582(V) NTSC=15.734KHz(H) & 59.94Hz(V) / P AL ...

  • Speco Technologies HTINTD8W - page 19

    18 650 Line Intensifier3 (Indoor W all & Ceiling Mount Dome Camera) DC Auto Iris V arifocal Lens 2.8-12mm CVC6245IHR / CVC6245IHRW (2.8-12mm) ■ SPECIFICATIONS MODEL CVC6245IHR / CVC6245IHRW 1/3” Sony Super HAD ll CCD NTSC, P AL NTSC=811(H) * 508(V) / P AL=795(H) * 596(V) NTSC=768(H) * 494(V) / P AL=752(H) * 582(V) NTSC=15.734KHz(H) & 59 ...

  • Speco Technologies HTINTD8W - page 20

    19 650 Line Intensifier3 (Indoor W all & Ceiling Mount Dome Camera) DC Auto Iris V arifocal Lens 2.8-12mm CVC6246IHR / CVC6246IHRW (2.8-12mm) ■ SPECIFICATIONS MODEL CVC6246IHR / CVC6246IHRW 1/3” Sony Super HAD ll CCD NTSC, P AL NTSC=811(H) * 508(V) / P AL=795(H) * 596(V) NTSC=768(H) * 494(V) / P AL=752(H) * 582(V) NTSC=15.734KHz(H) & 59 ...

  • Speco Technologies HTINTD8W - page 21

    20 650 Line Intensifier3 (T raditional Box type Camera) C&CS Mount Lens HTINTT5 (C&CS Mount Lens) ■ SPECIFICATIONS MODEL HTINTT5 1/3” Sony Super HAD ll CCD NTSC, P AL NTSC=811(H) * 508(V) / P AL=795(H) * 596(V) NTSC=768(H) * 494(V) / P AL=752(H) * 582(V) NTSC=15.734KHz(H) & 59.94Hz(V) / P AL=15.625KHz(H) & 50.00Hz(V) 2:1 Interla ...

  • Speco Technologies HTINTD8W - page 22

    21 CAMERA DIMENSION 1) HT7246IHR, HT7247IHR, HT7250IHR 2) HTINTB8, HTINTB9, HTINTB10 1.16” 5.10” dia 5.10” dia 3.93” dia 3.46” 3.46” 4.01” 3. 11 ” 3.89” dia 11 .02” 5.90” 5.03” 10.51” ...

  • Speco Technologies HTINTD8W - page 23

    22 CAMERA DIMENSION 3) HTINTD8, HTINTD9, HTINTD10 4) HT647HR TP 5.47” dia 4.36” 3.34” 3.70” 1.41” 4.33” dia 3.22” dia 4.33” dia 3.14” ...

  • Speco Technologies HTINTD8W - page 24

    23 CAMERA DIMENSION 5) CVC6245IHR, CVC6246IHR 6) HTINTT5 1.25” 4.09” 5.51” dia 4.60” dia 5.51” dia 2.51” 3.46” 3.26” 2.20” 1.49” dia ...

  • Speco Technologies HTINTD8W - page 25

    24 FEA TURES Now with “PRESETS” PRESETS (Outdoor , Indoor , Elevator , Lobby , Hallway & Low Light) Used for a quick and easy setup for the installation environment. 650TVL Resolution Horizontal resolution of 650 TV lines is achieved by using a SONY Super-HAD CCD with 410,000 pixels, and a custom DSP yielding pictures with a high S/N ratio. ...

  • Speco Technologies HTINTD8W - page 26

    25 FEA TURES Motion Detection with Alarm Output Built in motion detector with adjustable areas of coverage will Send a signal to an external alarm device when motion is detected. Privacy Mask It also has the ability to mask up to 8 areas of the picture where V iewing is not desired. Each zone can be independently programmed via the OSD Stabilizer T ...

  • Speco Technologies HTINTD8W - page 27

    26 ● Menu Setup ● Lens Setting 1. Press the Function Setup switch. - Main setup menu is displayed on the monitor screen. 1. Preset : INDOOR / OUTDOOR / LOW LIGHT / HALL WA Y / LOBBY / ELEV A T OR. - Used for a quick and easy setup for the installation environment. Using this function, you can control the screen brightness . 1. When the SETUP me ...

  • Speco Technologies HTINTD8W - page 28

    27 3. THE Lens mode has sub menu items as listed below . - BRIGHTNESS : Adjusts the video brightness . - FOCUS ADJ : T o adjust the DC lens focus correctly , you must activate the F ocus Settings mode under each lens menu. Activate the F ocus Settings mode , adjust the lens focus , and then deactivate the settings mode . ☞ NO TE ■ If color r ol ...

  • Speco Technologies HTINTD8W - page 29

    28 ◆ FUT O GAIN CONTROL) : T he higher the gain level, the brighter the screen - but the higher the noise . * OFF : Deactivates the A GC function. * LOW : Allows automatic gain control from 5.3dB to 32dB . * HIGH : Allows automatic gain control from 5.3dB to 37dB . ◆ INTENSIFY : When it is night or dark, the camera automatically detects the lig ...

  • Speco Technologies HTINTD8W - page 30

    29 ※ Select one of the following 5 modes , as appropriate for your purpose . ◆ A TW : Select this when the color temperature is between 1,700˚K and 11,000˚K. ◆ OUTDOOR : Select this when the color temperature is between 1,700˚K and 11,000˚K. (sodium light inclusion) ◆ INDOOR : Select this when the color temperature is between 4,500˚K a ...

  • Speco Technologies HTINTD8W - page 31

    30 ● Backlight Setting Unlik e conventional cameras , the 650Line Intensifier3™ Series are designed to deliver a distinctive subject and background at the same time , even when the subject is backlight, by using the features of the proprietary W -V DSP chip . 1. When the SETUP menu screen is displayed, select 'B A CKLIGHT' by using th ...

  • Speco Technologies HTINTD8W - page 32

    31 BLC SETUP HLC SETUP Press Set to Return Press Set to Return LEVEL TOP BOTTOM LEFT RIGHT LEVEL LIMITS MASK COLOR MASK TONE TOP BOTTOM LEFT RIGHT LOW 38 109 54 121 MIDDLE NIGHT ONL Y BLACK 1 5 120 5 172 ☞ NO TE ■ Because there can be a dif ference in the ef fectiv eness of HLC according to the amount of light ar ea in the screen, optimize the ...

  • Speco Technologies HTINTD8W - page 33

    32 3. Set the SPECO DNR mode to 'ON' and press the Function Setup switch. T hen you can adjust the noise reduction level. ☞ NO TE ■ Y ou cannot set the SPECO DNR to ‘ON’ or ‘OFF’ when the A GC mode of the EXPOSURE menu is ‘OFF’. ■ W hen adjusting the noise r eduction le v el in the SPECO DNR mode, remember that the highe ...

  • Speco Technologies HTINTD8W - page 34

    33 ◆ A UT O : T he mode is switched to 'Color' in a normal environment, but switches to 'B/W' mode when ambient illumination is low . T o set up the switching time for A UT O mode , press the Function Setup switch. Y ou can turn on or off the burst signal on B/W mode . - BURST MODE : Y ou can turn on or off the burst signal on ...

  • Speco Technologies HTINTD8W - page 35

    34 2. Select a desired mode using the Function Setup switch. SPECIAL IMAGE SETUP 1.IMAGE ADJ 2.MONITOR 3.CAM TITLE 4.SYNC 5.MOTION DET 6.PRIV ACY 7.COMM ADJ 8.LANGUAGE 9.RETURN 1.V -REV 2.H-REV 3.D-ZOOM 4.DIS 5.FONT COLOR 6.SHARPNESS 7.RETURN OFF INT OFF OFF ENGLISH OFF OFF WHITE ON ◆ IMA GE ADJ . : 1) When the SETUP menu screen is displayed, sel ...

  • Speco Technologies HTINTD8W - page 36

    35 ☞ NO TE ■ W hen the V -REV or H-REV mode is enabled, the te xt on the screen does not ip. ■ If you increase the SHARPNESS lev el too high, the pictur e may become distor ted or noise may appear . ☞ NO TE ■ W hen the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen ev en if you enter one. ■ Only Eng lis ...

  • Speco Technologies HTINTD8W - page 37

    36 ☞ NO TE ■ W hen using AC po wer a t 60Hz(NTSC), 50Hz(P AL), fr equency , y ou can use the L/L type synchronization. ■ W hen the power is DC 12V , the SYNC menu is xed to the ‘INT’ mode. ◆ MO TION DET :T his product has a feature that allows you to observe movement of objects in 8 different areas on the screen, and the words ' ...

  • Speco Technologies HTINTD8W - page 38

    37 1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates 'PRIV ACY'. 2) Set up the mode using the Function Setup switch. - AREA : Y ou can select up to 12 PRIV ACY areas . - MODE : Determines whether to use the area selected in the AREA. - MASK COLOR : Determine area color . Y ou can sel ...

  • Speco Technologies HTINTD8W - page 39

    38 ● T rouble Shooting PROBLEM Northing appears on the screen. F Check the power cable, power supply output and video connection between the camera and monitor . F Are the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth. F Adjust the monitor controls, as required. F If the camera is facing a very strong light, ...

  • Speco Technologies HTINTD8W - page 40

    39 ...

  • Speco Technologies HTINTD8W - page 41

    40 u MEMO ...

  • Speco Technologies HTINTD8W - page 42

    41 u MEMO ...

  • Speco Technologies HTINTD8W - page 43

    42 u MEMO ...

  • Speco Technologies HTINTD8W - page 44

    200 New Highway Amityville, NY 1 1701 631-957-8700 1 800 645 5516 www .specotech.com ...

Manufacturer Speco Technologies Category Security camera

Documents that we receive from a manufacturer of a Speco Technologies HTINTD8W can be divided into several groups. They are, among others:
- Speco Technologies technical drawings
- HTINTD8W manuals
- Speco Technologies product data sheets
- information booklets
- or energy labels Speco Technologies HTINTD8W
All of them are important, but the most important information from the point of view of use of the device are in the user manual Speco Technologies HTINTD8W.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Speco Technologies HTINTD8W, service manual, brief instructions and user manuals Speco Technologies HTINTD8W. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Speco Technologies HTINTD8W.

Similar manuals

A complete manual for the device Speco Technologies HTINTD8W, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Speco Technologies HTINTD8W by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Speco Technologies HTINTD8W.

A complete Speco Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Speco Technologies HTINTD8W - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Speco Technologies HTINTD8W, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Speco Technologies HTINTD8W, that we can find in the current document
3. Tips how to use the basic functions of the device Speco Technologies HTINTD8W - which should help us in our first steps of using Speco Technologies HTINTD8W
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Speco Technologies HTINTD8W
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Speco Technologies HTINTD8W in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Speco Technologies HTINTD8W?

Use the form below

If you did not solve your problem by using a manual Speco Technologies HTINTD8W, ask a question using the form below. If a user had a similar problem with Speco Technologies HTINTD8W it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)