English dropdown-ico

Manual Altinex CP7317RS

16 pages 2.1 mb
Download

Go to site of 16

Summary
  • Altinex CP7317RS - page 1

    CONTROLLERS CP7317RS RS – 232 CONTROLLER USER’S GUIDE MANUAL PART NO. 400-0017-003 PRODUCT REVISION: 0 ...

  • Altinex CP7317RS - page 2

    CONTROLLERS 1 INTRODUCTION Thank you for purchasing the CP7317RS RS-232 Controller. We are sure you will find it a reliable and useful product. Superior performance for the right price backed by solid technical and customer support is what we have to offer. The product you are holding in your hands is designed using state-of-the-art technology and ...

  • Altinex CP7317RS - page 3

    CONTROLLERS 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your CP7317RS RS-232 Controller. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your CP7317RS and to prevent fire and shock hazard. Please read them carefully and heed all warnings. 1.1 GENERAL • Unau ...

  • Altinex CP7317RS - page 4

    CONTROLLERS 3 ABOUT CP7317RS - RS-232 CONTROLLER 2 The CP7317RS RS-232 Controller is designed to provide expanded capabilities to any control system. The CP7317RS is designed to accept RS- 232 commands from a control device and output those commands as relay contacts or digital high or low. The CP7317RS also is able to convert digital inputs throug ...

  • Altinex CP7317RS - page 5

    CONTROLLERS 4 CP7317RS DESCRIPTION 4 CP7317RS FEATURES 4.1 RS-232 PORT This port (located next to the power outlet) is a fully programmable, bi-directional, and full duplex port that has the ability to operate at any baud rate up to 9600. The general standard on transmission is 8 bits, no parity, and 1 stop bit. The factory default for communicatio ...

  • Altinex CP7317RS - page 6

    CONTROLLERS 5 The following table shows the pin-outs on the connector corresponding to the following I/O port pin numbers. Connector Pin No. 1 2 3 4 5 6 7 8 9 I/O Port Pin No. 1 3 5 7 9 Ground 2 4 6 8 There are 4 ports with 8 I/O pins and one ground pin, #5 on each port. Each pin of each port can be individually addressed and programmed to be high ...

  • Altinex CP7317RS - page 7

    CONTROLLERS 6 4.7 PROGRAMING COM MANDS The commands below are used for presetting the default status of the unit. Note: AFTER USING THE PROGRAMMING COMMANDS LISTED BELOW, THE CP7317RS SHOULD BE POWERED OFF AND THEN ON. [SETIp,b,n] This command sets individual pins of each I/O port to input or output status. It is a programming command and needs to ...

  • Altinex CP7317RS - page 8

    CONTROLLERS 7 b This letter defines the status of a pin, while its position in a string number corresponds to the pin number on the I/O Port of the CP7317RS . For example b 4 represents the status of Pin 4 on the I/O connector. The valid pins on I/O port are from 1 to 9 except 5. A valid range for the b is either 1 or 0. Any other number will cause ...

  • Altinex CP7317RS - page 9

    CONTROLLERS 8 FIGURE 6: Input/Output Port Pin Configuration n This letter designates the status of the pin as either high or low during “Power up” of the unit. when n = 1 the pin is set as high when n = 0 the pin is set as low Example: Set pin 1 of port 3 as low during POWER ON. [SETPD3 ,1,0] [SETPDp,b 1 b 6 b 2 b 7 b 3 b 8 b 4 b 9 ] This comma ...

  • Altinex CP7317RS - page 10

    CONTROLLERS 9 n This letter designates the status of the relay during “Power up”. n=1 relay is open n=0 relay is closed Example: Set relay 6 of port 2 to be open at power up. [SETPR2,6,1] Set relay 2 of port 4 to be closed at power up. [SETPR4,2,0] [ SETPRp ,b 1 b 2 b 3 b 4 b 5 b 6 b 7 b 8 ] This command sets the “Power ON” status of all re ...

  • Altinex CP7317RS - page 11

    CONTROLLERS 10 Bit No. Connector Pin No. 7 4 8 9 n Data that defines the status of the pin n=1 or n=0. [SETDp, b 1 b 6 b 2 b 7 b 3 b 8 b 4 b 9 ] SET all pins on the particular I/O port of the unit. This command defines if I/O port pins will be high or low. The pin must be set as output if it needs to be set low. If particular pin is set as input th ...

  • Altinex CP7317RS - page 12

    CONTROLLERS 11 [READDp] Read Digital status of a particular port. The feedback is in the following format [10011100] 1 is for high 0 is for low. The feedback provides status of all pins. Left most character is a bit pin number 1. p Port number, this is an ASCII character from 1 to 4 that matches the port number on the back of the CP7317RS . The acc ...

  • Altinex CP7317RS - page 13

    CONTROLLERS 12 4.10.1. MEMORY 1 I/O port/memory is A Sub-Register address is from 00 to 255 Sub-Register definitions 00 This location should be set to FFh i f memory initialization is required. During the power up sequence this location is checked for software revision. If FFh is encountered then all memories are reset to factory condition. User me ...

  • Altinex CP7317RS - page 14

    CONTROLLERS 13 33 Power up status of relays on port 2,3,4. If bit is set to 0 then relay will be closed on power up. If bit is set to 1 then relay will be open on power up. 34 Left bracket for beginning command code. Factory set to “[“. 35 Right bracket for ending command code. Factory set to “]“. 36 Power on default status of digital port ...

  • Altinex CP7317RS - page 15

    CONTROLLERS 14 08 00-07 locations for return code for port 1 pin 2 for transition from 0 to 1. This return code should include any necessary brackets. . . . . 15 end of return code Default return code is in the following format [Px.yd] x port number 1, 2, 3, 4 y pin number 1, 2, 3, 4, 5, 6, 7, 8 d direction U for 0-> 1 or D for 1->0 transitio ...

  • Altinex CP7317RS - page 16

    CONTROLLERS 15 ALTINEX POLICY 5 5.1 LIMITED WARRANTY Altinex warrants that its products and cables are free from defects in materials under normal use and service. This warranty is limited to repairing at company’s factory any part or parts of the product, which upon company’s examination shall disclose to be, thus defective. Products considere ...

Manufacturer Altinex Category Network Card

Documents that we receive from a manufacturer of a Altinex CP7317RS can be divided into several groups. They are, among others:
- Altinex technical drawings
- CP7317RS manuals
- Altinex product data sheets
- information booklets
- or energy labels Altinex CP7317RS
All of them are important, but the most important information from the point of view of use of the device are in the user manual Altinex CP7317RS.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Altinex CP7317RS, service manual, brief instructions and user manuals Altinex CP7317RS. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Altinex CP7317RS.

Similar manuals

A complete manual for the device Altinex CP7317RS, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Altinex CP7317RS by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Altinex CP7317RS.

A complete Altinex manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Altinex CP7317RS - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Altinex CP7317RS, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Altinex CP7317RS, that we can find in the current document
3. Tips how to use the basic functions of the device Altinex CP7317RS - which should help us in our first steps of using Altinex CP7317RS
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Altinex CP7317RS
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Altinex CP7317RS in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Altinex CP7317RS?

Use the form below

If you did not solve your problem by using a manual Altinex CP7317RS, ask a question using the form below. If a user had a similar problem with Altinex CP7317RS it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)