English dropdown-ico

Manual Graco 233501

26 pages 0.43 mb
Download

Go to site of 26

Summary
  • Graco 233501 - page 1

    1:1 RA TIO TRIT ON R 308 Diaphragm Pump Used to pump waterborne and solvent–based paints and catalysts. For professional use only . 1 15 psi (0.8 MPa, 8 bar) Maximum Fluid Working Pressure 1 15 psi (0.8 MPa, 8 bar) Maximum Air Input Pressure Part No. 233500 Aluminum Pump, Series D, npt threads Part No. 233501 Stainless Steel Pump, Series C, npt t ...

  • Graco 233501 - page 2

    2 309303 T able of Contents Safety W arnings 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation 1 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maintenance 12 . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Graco 233501 - page 3

    309303 3 W ARNING INSTRUCTIONS EQUIPMENT MISUSE HAZARD Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and result in a serious injury .  This equipment is for professional use only .  Read all instruction manuals, tags, and labels before operating the equipment.  Use the equipment only for its intend ...

  • Graco 233501 - page 4

    4 309303 W ARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition and result in fire or explosion and serious injury .  Ground the equipment. Refer to Grounding on page 7.  If there is any static sparking or you feel an electric shock while using this equipment, stop p ...

  • Graco 233501 - page 5

    309303 5 W ARNING PRESSURIZED FLUID HAZARD Spray from the gun, hose leaks, or ruptured components can splash fluid in the eyes or on the skin and cause serious injury .  Do not stop or deflect fluid leaks with your hand, glove, or rag.  Follow the Pressure Relief Procedure on page 1 1 before cleaning, checking, or servicing the equipment.  ...

  • Graco 233501 - page 6

    6 309303 Installation General Information  Fig. 2 shows a wall mounted HVLP spray applica- tion. It is only a guide for selecting and installing system components. Contact your Graco distributor for assistance in planning a system to suit your needs.  Always use Genuine Graco Parts and Accessories, available from your Graco distributor . If y ...

  • Graco 233501 - page 7

    309303 7 Installation Grounding W ARNING FIRE AND EXPLOSION HAZARD This pump must be grounded. Before operating the pump, ground the system as explained below . Also read the sec- tion FIRE AND EXPLOSION HAZARD on page 4. T o reduce the risk of static sparking, ground the pump and all other equipment used or located in the pumping area. Check your ...

  • Graco 233501 - page 8

    8 309303 Installation Air Line W ARNING A bleed-type master air valve (B) is required in your system to relieve air trapped between this valve and the pump. See Fig. 2. T rapped air can cause the pump to cycle unexpectedly , which could result in serious injury , including splashing in the eyes or on the skin, injury from moving parts, or contamina ...

  • Graco 233501 - page 9

    309303 9 Installation KEY A TRI T O N 308 Pump B Bleed-type master air valve (required for pump) C Air supply line D Air line filter E Air line shutof f valve F Pump air regulator G Gun air regulator (used in spray system only) H Fluid pressure regulator (used in spray system only) J Drain/circulation valve K Drain tube L Suction tube M Pump fluid ...

  • Graco 233501 - page 10

    10 309303 Installation Fluid Suction Line  Screw the suction line (L) into the pump inlet (M) snugly . Use a compatible liquid thread sealant on connections to prevent air from getting into the fluid line.  Do not pressure feed this pump.  See the T echnical Data on page 24 for maximum suction lift.  Use an agitator (U) to prevent fluid ...

  • Graco 233501 - page 11

    309303 1 1 Operation Pressure Relief Procedure W ARNING The system remains pressurized until pressure is manually relieved. T o reduce the risk of serious injury from pressurized fluid, accidental spray from the gun, or splashing of any fluid, follow this proce- dure whenever you  Stop spraying  Are instructed to relieve pressure  Check or ...

  • Graco 233501 - page 12

    12 309303 Maintenance Tightening Threaded Connections Before each use, check all hoses for wear or damage. Replace as necessary . Check that all threaded con- nections are tight and leak-free. NOTE: Periodically , re–torque fluid cover screws (38) to 10 ft–lb (13.6 N  m). Cleaning Clean the outside of the equipment daily , using a soft cloth ...

  • Graco 233501 - page 13

    309303 13 T roubleshooting PROBLEM CAUSE SOLUTION Pump runs sluggishly . Worn or damaged carriage o-rings. Service air valve. See page 18. Pump runs erratically . Clogged suction line or inlet strainer . Clear . Sticking or leaking ball check valves. Disassemble and clean ball checks. Replace worn parts. See page 16. Pump runs too fast. Exhausted f ...

  • Graco 233501 - page 14

    14 309303 Service Remove the Fluid and Side Covers T ools Required  T orque wrench  2.5 mm allen wrench  6 mm allen wrench  Adjustable wrench Disassembly W ARNING T o reduce the risk of serious injury whenever you are instructed to relieve pressure, always follow the Pressure Relief Procedure on page 1 1. 1. Relieve the pressure. 2. Dis ...

  • Graco 233501 - page 15

    309303 15 Service Remove the Fluid and Side Covers (continued) Reassembly 1. Clean all parts and inspect for wear or damage. Replace parts as needed. 2. If necessary , reinstall the felt dampener (29) and side cover (31). T orque the screws (39) to 28 in-lb (3.1 N  m). 3. Install new ball check seals (24). 4. Place the fluid covers (32) on the h ...

  • Graco 233501 - page 16

    16 309303 Service Ball Check Repair T ools Required  O-ring pick Disassembly NOTE: Ball Check Repair Kit 245067 is available. Parts included in the kit are marked with a double dagger , for example (21  ). Use all the parts in the kit for the best results. 1. Remove the fluid covers. See page 14. 2. Remove the inlet and outlet ball checks. No ...

  • Graco 233501 - page 17

    309303 17 Service Diaphragm Repair T ools Required  M8 bolt  M8 hexnut  Adjustable wrench, or vise NOTE: Diaphragm Repair Kit 245065 is available. Parts included in the kit are marked with an asterisk, for example (6*). Always replace both diaphragms for the best results. 1. Remove the fluid covers. See page 14. W ARNING Wear gloves when r ...

  • Graco 233501 - page 18

    18 309303 Service Air V alve Repair T ools Required  3 mm allen wrench  Needlenose pliers  Retaining ring removal tool  O-ring pick Disassembly NOTE: Air V alve Repair Kit 245066 is available. Parts included in the kit are marked with a dagger , for exam- ple (8  ). Use all the parts in the kit for the best results. 1. Remove the sid ...

  • Graco 233501 - page 19

    309303 19 Service Air V alve Repair (continued) Reassembly 1. Lubricate the o-rings (8  ) and install them on the carriage (7). Slide the carriage into the center housing (1) so the notch faces out, as shown in Fig. 7. 2. Lubricate each o-ring (10  ) and install them on the plugs (9). Insert a plug in each side to secure the carriage (7). Ins ...

  • Graco 233501 - page 20

    20 309303 Service Shaft Repair T ools Required  Needlenose pliers  O-ring pick  Retaining ring removal tool  Vise with soft jaws Disassembly NOTE: Shaft Repair Kit 24A155 is available. Parts included in the kit are marked with a star , for example (5  ). Use all the parts in the kit for the best results. NOTE: Shaft and Bearing Repai ...

  • Graco 233501 - page 21

    309303 21 Service Shaft Repair (continued) ti1035E Fig. 8 38 1 3 2 10 ft-lb (13.6 N  m). Lubricate. Align. 4 1 3 4 1 2 2 2 2 3 3 28 in-lb (3.1 N  m). 4  8  10 12  13 14  15  16   24 24   24 24  32 38 11 9 1 32 17 29 31 39 7 2  8 36 3 4   5 6 6 2 5 Align. See Fig. 6. 5 43  46 45  44 ? ...

  • Graco 233501 - page 22

    22 309303 Parts Part No. 233500 Aluminum Pump, Series D, npt threads Part No. 233501 Stainless Steel Pump, Series C, npt threads (Shown) Part No. 233776 Aluminum Pump, Series C, BSPP threads Part No. 233777 Stainless Steel Pump, Series C, BSPP threads 1 3 4  5  *6 6* 7  8 9  10 11 12  13  14  15  16  17 18 ...

  • Graco 233501 - page 23

    309303 23 Parts NOTE: Purchase items 36–39 locally . Ref. No. Part No. Description Qty . Ref. No. Part No. Description Qty . 1 15J732 HOUSING, center; for Part No. 233500; aluminum 1 198894 HOUSING, center; for Part No. 233501; stainless steel 1 198892 HOUSING, center; for Part No. 233776; aluminum 1 197679 HOUSING, center; for Part No. 233777; s ...

  • Graco 233501 - page 24

    24 309303 T echnical Data Category Data Maximum fluid working pressure 1 15 psi (0.8 MPa, 8.0 bar) Air pressure operating range 12 to 1 15 psi (.08 to 0.8 MPa, 0.8 to 8.0 bar) Ratio 1:1 Maximum free flow delivery 8.5 gal./min (32 l/min) Operating fluid temperature range 50 to 176  C (10 to 80  C) Maximum suction lift 16 ft (4.8 m) dry; 22 ft ...

  • Graco 233501 - page 25

    309303 25 Dimensions BOTTOM VIEW SIDE VIEW Aluminum T wo 0.35 in. (9 mm) diameter holes, for mounting pump 4.1 in. (104 mm) 4.53 in. (1 15 mm) 3/8 npt or 3/8 BSPP Fluid Outlet 3/4 npt or M26 x 1.5 Fluid Inlet 1/4 npt or 1/4 BSPP Air Inlet 4.88 in. (124 mm) 8.2 in. (208 mm) ti1037a TI3265A SIDE VIEW SST 9.1 in. (231.5 mm) ...

  • Graco 233501 - page 26

    26 309303 Graco Standard W arranty Graco w arrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco w ill, for a period of twelve months from th ...

Manufacturer Graco Category Heat Pump

Documents that we receive from a manufacturer of a Graco 233501 can be divided into several groups. They are, among others:
- Graco technical drawings
- 233501 manuals
- Graco product data sheets
- information booklets
- or energy labels Graco 233501
All of them are important, but the most important information from the point of view of use of the device are in the user manual Graco 233501.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Graco 233501, service manual, brief instructions and user manuals Graco 233501. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Graco 233501.

Similar manuals

A complete manual for the device Graco 233501, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Graco 233501 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Graco 233501.

A complete Graco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Graco 233501 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Graco 233501, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Graco 233501, that we can find in the current document
3. Tips how to use the basic functions of the device Graco 233501 - which should help us in our first steps of using Graco 233501
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Graco 233501
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Graco 233501 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Graco 233501?

Use the form below

If you did not solve your problem by using a manual Graco 233501, ask a question using the form below. If a user had a similar problem with Graco 233501 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)