English dropdown-ico

Manual Life Fitness SM82

24 pages 2.69 mb
Download

Go to site of 24

Summary
  • Life Fitness SM82 - page 1

    M051-K50-B118 1 8 STA CK MULTI-JUNGLE (SM82) WITH ONE A DJUSTA B LE PULLEY UNPA CKING A ND A SSEMBLY INSTRUCTIONS ...

  • Life Fitness SM82 - page 2

    SM82 U npacking & Assembly Instructions 2 The SM82 c om es partially assem bled. Follow the steps below to com plete the as sem bly. WA RNING: COMPONENTS O F THE SM82 ARE LARGE AND HEAVY. USE CAUTION WHEN ASSEMBLING T HIS MACHINE. MA TERIA LS A ND TOOLS REQUIRED FOR A SSEMBL Y 1/2”, 3/8”, 5/8” & 9/16” Sock et wrench with extension 1 ...

  • Life Fitness SM82 - page 3

    SM 82 Unpacking & Assembly Instr uctions 3 UNPA CKING Follow the steps below when unpacking the c om ponents of the SM82. 1. Cut off the shipping wrapper. 2. Remove th e parts boxes an d shippin g boards. 3. Remove th e items in the part s boxes. T hese item s ar e shown in Figure 1. A. Remove the bolts bag. B. Remove the par ts shown below. Pa ...

  • Life Fitness SM82 - page 4

    SM82 U npacking & Assembly Instructions 4 A SSEMBLY Figure 2 shows an ass em bled SM82. Figure 2. SM82 main components (seats and cables remov ed for clarity). 1. Cubes (2) 2. Low row bench (2) 3. Lat bench ( 2) 4. Connecting beam (1) 5. Lat tops (2) 6. T ricep top (1) 7. Adj. X -over top (1) 8. 300 lb. W eight stack s (4) 9. 190 lb. W ei g ht ...

  • Life Fitness SM82 - page 5

    SM 82 Unpacking & Assembly Instr uctions 5 Figure 3. Set t he w eight stack cu bes. Figure 4. Configura tion for 2-3/4” and 3” bolts. ...

  • Life Fitness SM82 - page 6

    SM82 U npacking & Assembly Instructions 6 Figure 5. Configura tion for 6” bolts. 2. Bolt on the tear drop pulleys above the benc hes (s ee Figure 6) on both c ubes using two 3/8” x 2-3/4” hex head bolts . Include the 3/8” f lat washer, end cap washers, end c aps and 3/8” Nyloc (locknut). Us e the bolt conf iguration shown. You may wi ...

  • Life Fitness SM82 - page 7

    SM 82 Unpacking & Assembly Instr uctions 7 3/8” x 3” (4) bolt top beams together 7/16” x 6” (8) mount on t ops U T T V Remove pulleys from housings to give clearance to socket extensio n Figure 7. Bolt on the c onnecting beam, lat tops, tricep tops. 4. Mount the 56” lat tops (part T ) to the cubes us ing a 5/8” soc ket and c om bina ...

  • Life Fitness SM82 - page 8

    SM82 U npacking & Assembly Instructions 8 5. Install the w eight stacks. To do this : A. Use a 9/16” soc ket and c om bination wrench and rem ove the tric ep back rest bolts (see F igure 9). B. Use a 9/16” soc ket and c om bination wrench and unbolt the top plate and rem ove the guide rods (s ee Figure 9). Figure 9. Remov e the tricep b ack ...

  • Life Fitness SM82 - page 9

    SM 82 Unpacking & Assembly Instr uctions 9 C. Prepare the w eight stack- add bumpers to bottom, inse rt guide rods, put pull pin in bottom st ack. D. Flip ov er the w eight stack onto piano dolly. E. Hoist the weight stack onto the machine. Figure 10. Install t he w eight stacks. F. Bolt on the top plate to the top of the c e lls with the top p ...

  • Life Fitness SM82 - page 10

    SM82 U npacking & Assembly Instructions 10 Figure 12. Bolt t he float ing pulleys into t he crossov er 190 lb w eight stacks. 7. Mount the seated row and lat benches to the frame. Us e the 3/8” x 2-3/4” hex bolts on the upper bench f ram e holes as s hown below. Use the 3/8” x 3” hex bolts on the lower lat bench holes as s hown below. U ...

  • Life Fitness SM82 - page 11

    SM 82 Unpacking & Assembly Instr uctions 11 Figure 14. Bolt t he benches to the frame. ...

  • Life Fitness SM82 - page 12

    SM82 U npacking & Assembly Instructions 12 INSTA LLING THE CABLES The SM82 us es eight cables. T here ar e three diff erent types of cable used on the SM82. T hey are: 1. Crossover cables ( ball end cables) ( 3). 2. Low row cable (the long cables) (2). 3. Lat pulldown and tricep cables ( 3). The lat and tric ep cables c an be identified by thei ...

  • Life Fitness SM82 - page 13

    SM 82 Unpacking & Assembly Instr uctions 13 ADJUSTABLE CROSSOVER CABLE RO UTI NG Once you’ve removed the pulleys as desc ribed previously, route the adjustable c rosso ver cable as shown in Figure 16. Figure 16. Adjustable crossov er cable routin g. ...

  • Life Fitness SM82 - page 14

    SM82 U npacking & Assembly Instructions 14 Figure 17. Adjustable crossover cab le end detail. Using a 7/8” wrench, tighten the j am nut onto the adjustable pulley threads as shown in Figure 17. Place a rubber c ap on the top of the cable as shown in Figure 17 (right) . CROSSOVER CABLE RO UTI NG Once you’ve removed the pulleys as desc ribed ...

  • Life Fitness SM82 - page 15

    SM 82 Unpacking & Assembly Instr uctions 15 LOW RO W CABLE RO UTING Route the low row cables as shown in Figure 19. Figure 19. Low row cable routing. ...

  • Life Fitness SM82 - page 16

    SM82 U npacking & Assembly Instructions 16 Bolt the cable to the weight stack s as s hown in Figure 20. Thr ead the 7/8” nut up on the cable bolt as shown at lef t. Screw the bolt down into the weight stack as shown at right. Tighten the bolt with a 7/8” com bination wrench. Figure 20. Screw the cable in to th e weigh t stack. LAT PULLDOWN ...

  • Life Fitness SM82 - page 17

    SM 82 Unpacking & Assembly Instr uctions 17 TRICEP PUSHDOW N CABLE RO UTI NG Route the tricep pushdown cable as shown in Figure 22. Screw the cable into the weight stac k as shown previously in Figure 20. Figure 22. Tricep pus hdow n cable routing. ...

  • Life Fitness SM82 - page 18

    SM82 U npacking & Assembly Instructions 18 HA RDWARE 0123456 ½½½½½½ Hardware F igure 1. Assembly Parts. ...

  • Life Fitness SM82 - page 19

    SM 82 Unpacking & Assembly Instr uctions 19 The parts shown in Hardware Figure 1 are us ed to assem ble the SM82. T hey are: A. 7/16” x 6” hex head bolt (used to bolt the tric ep top beam s, lat top beam s, and connecting beam to the tops of the cubes) B. 7/16” flat washer C. 7/16” cap washer ( used on the head end of the 6” bolt so e ...

  • Life Fitness SM82 - page 20

    SM82 U npacking & Assembly Instructions 20 Hardware Figure 3. Cables . N. Lat pulldown cables (sam e as tricep cable) (2) P. Tric ep cable (s am e as lat pulldown cables) ( 2) Q. Low row cables (long cables ) (2) R. Adjustable c rosso ver cables ( one ball end) (1) R1. Crossover cables ( two ball ends) (2) ...

  • Life Fitness SM82 - page 21

    SM 82 Unpacking & Assembly Instr uctions 21 Hardware F igure 5. T op assemblies. S. Teardr op pulleys (bolt on above lat and seated row benches) (4 ) T. 56” Lat tops (bolt to top of cells with pulleys above lat benches) (2) U. 29” Tr icep top (bolt on to 56” lat top bar ) (1) V. Adjustable c rossover top (bolt on to 56” lat top bar) (1) ...

  • Life Fitness SM82 - page 22

    SM82 U npacking & Assembly Instructions 22 Hardware Figure 5. Weight stack rubber bumpers. W . W eight s tack rubber bum pers (inserted under weight stac ks ) Hardware Figure 6. Floating pulle ys. X. Floating pulleys (bolt to 190 lb cable cros sover weight stac k s) ...

  • Life Fitness SM82 - page 23

    SM 82 Unpacking & Assembly Instr uctions 23 PA RTS LIST Part # ID Description Quantity Main components 1 2 3 4 5 6 7 8 Cubes Low row bench Lat bench Connecting beam Lat top Tr icep top Adj. x-over top 300 lb weight stack 190 lb weight stack 2 2 2 1 2 1 1 4 4 0017-00103-0234 Cables, caps & n uts M N P Q R S Cable jam nut Lat pulldown cable T ...

  • Life Fitness SM82 - page 24

    SM82 U npacking & Assembly Instructions 24 0017-00101-1413 0017-00104-0368 0017-00103-0217 Pulley hardw are (installed) 1-3/4” Bolt Cap washer 3/8” Nyloc nut 0017-00101-1413 0017-00104-0313 0017-00103-0217 Floating pulley hardware (installed) 1-3/4” Bolt Flat washer 3/8” Nyloc nut ...

Manufacturer Life Fitness Category Home Gym

Documents that we receive from a manufacturer of a Life Fitness SM82 can be divided into several groups. They are, among others:
- Life Fitness technical drawings
- SM82 manuals
- Life Fitness product data sheets
- information booklets
- or energy labels Life Fitness SM82
All of them are important, but the most important information from the point of view of use of the device are in the user manual Life Fitness SM82.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Life Fitness SM82, service manual, brief instructions and user manuals Life Fitness SM82. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Life Fitness SM82.

Similar manuals

A complete manual for the device Life Fitness SM82, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Life Fitness SM82 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Life Fitness SM82.

A complete Life Fitness manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Life Fitness SM82 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Life Fitness SM82, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Life Fitness SM82, that we can find in the current document
3. Tips how to use the basic functions of the device Life Fitness SM82 - which should help us in our first steps of using Life Fitness SM82
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Life Fitness SM82
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Life Fitness SM82 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Life Fitness SM82?

Use the form below

If you did not solve your problem by using a manual Life Fitness SM82, ask a question using the form below. If a user had a similar problem with Life Fitness SM82 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)