English dropdown-ico

Manual Intelligent Motion Systems UDAS-1001E

65 pages 1.21 mb
Download

Go to site of 65

Summary
  • Intelligent Motion Systems UDAS-1001E - page 1

    855M495 1.0 INNOVATIVE PC Data Acquisition Solutions UDAS-1001E Series Hardware User Manual for the Multifunction Data Acquisition System ...

  • Intelligent Motion Systems UDAS-1001E - page 2

    Copyright 2000 by Intelligent Instrumentation Inc., Tucson, Arizona, USA All rights reserved. Warranty and Repair Policy Statement Warranty and Repair Policy Statement General Seller warrants that its products furnished hereunder will, at the time of delivery, be free from defects in material and workmanship and will conform to Seller's publis ...

  • Intelligent Motion Systems UDAS-1001E - page 3

    Technical Assistance and Service Technical Assistance and Service Seller's warranty as herein set forth shall not be enlarged, diminished or affected by, and no obligation or liability shall arise or grow out of, Seller's rendering of technical advice, facilities or service in connection with Buyer's order of the goods furnished here ...

  • Intelligent Motion Systems UDAS-1001E - page 4

    Trademarks Trademarks U-Link  Software Libraries is a trademark of Intelligent Instrumentation Incorporated. VisualDesigner  is a registered trademark of Intelligent Instrumentation Incorporated. LabVIEW  is a registered trademark of National Instruments Corporation. Windows  98 is a registered trademark of Microsoft  Corpor ...

  • Intelligent Motion Systems UDAS-1001E - page 5

    UDAS-1001E Series User Manual Revision History Version Date Revision 1.0 000218 Original Release ...

  • Intelligent Motion Systems UDAS-1001E - page 6

    i Chapter 1 UDAS-1001E Series Data Acquisition Systems 1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1.1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 FIGURE 1.1 UDAS Series Block Diagram . . . . . . . . . . . . . ...

  • Intelligent Motion Systems UDAS-1001E - page 7

    Table of Contents ii 3.4.1.1 Verify Lower Level Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13 Appendix A Specifications A.1 UDAS-1001E Series Hardware Specifications . . . . . . . . . . . . . . . . . . . . . A-1 TABLE A.1 Hardware Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 A.2 UDAS-1001E-3, ...

  • Intelligent Motion Systems UDAS-1001E - page 8

    1-1 Chapter 1 Chapter 1 UDAS-1001E Series Data UDAS-1001E Series Data Acquisition Systems Acquisition Systems 1.1 1.1 Introduction Introduction The UDAS-1001E Series Data Acquisition Systems are stand-alone, multifunction, plug-and-play data acquisition systems that connect to the Universal Serial Bus and operate using power supplied through either ...

  • Intelligent Motion Systems UDAS-1001E - page 9

    UDAS-1001E Series Data Acquisition Systems 1-2 1.1.1 1.1.1 Features Features Features and basic specifications of the UDAS units are listed below. Specifications of each UDAS unit are listed in Appendix A, Specifications . The UDAS system block diagram is shown below. FIGURE 1.1 UDAS Series Block Diagram SoftwareSupport Library SoftwareSupport Libr ...

  • Intelligent Motion Systems UDAS-1001E - page 10

    1- 3 UDAS SYSCHECK The SYSCHECK application enables you to verify the UDAS installation is functioning properly. SYSCHECK can also be used during the calibration procedure and for simple data acquisition. U-Link Software Libraries for Windows 98 These function libraries allow custom application development using C/C++ and Visual Basic. LabView 5.0 ...

  • Intelligent Motion Systems UDAS-1001E - page 11

    UDAS-1001E Series Data Acquisition Systems 1-4 Digital Input/Output Digital Input/Output • 16 Programmable digital I/O channels. Groups of 8 separately programmable for input or output. • Digital inputs can be programmed to read digital signal status, detect a change-of-state or to perform low speed event counting (up to 2 kHz). • Digital out ...

  • Intelligent Motion Systems UDAS-1001E - page 12

    1- 5 • Programmable gains are 1, 10, and 100 which translate to a full-scale input of 0-10 V, 0-1.0 V, 0-0.1 V, ± 10 V, ± 1.0 V, ± 0.1 V, ± 5 V, ± 0.5 V, and ± 0.05 V. • The analog input section has 16 single-ended or 8-differential analog input channels. The analog input section has a first-in-first-out (FIFO) buffer for high-speed captu ...

  • Intelligent Motion Systems UDAS-1001E - page 13

    UDAS-1001E Series Data Acquisition Systems 1-6 If an analog input is used for the trigger, specify the trigger level, analog input channel, and slope. Use analog output channel 1 for setting the trigger level. When an input signal on the selected channel of the proper slope (rising or falling voltage) crosses the trigger level, the conversion proce ...

  • Intelligent Motion Systems UDAS-1001E - page 14

    1- 7 The scanner operates with the built-in analog channels, or with the optional AI-MAX. The AI- MAX allows up to 256 analog input channels to be connected to a single UDAS device. High-Speed Analog Input Triggering High-Speed Analog Input Triggering To start or stop conversions, use triggering in the High-Speed Analog Input mode in the UDAS devic ...

  • Intelligent Motion Systems UDAS-1001E - page 15

    UDAS-1001E Series Data Acquisition Systems 1-8 Example: If 9 channels are being scanned at a rate of 100Hz and the slope is low to high, the trigger signal must remain below the trigger level for 9/100 of a second, and above the trigger level for 9/100 of a second to ensure that a trigger event occurs. When using External Input as the trigger, this ...

  • Intelligent Motion Systems UDAS-1001E - page 16

    1- 9 Digital I/O signals are TTL-compatible and perform functions such as reading digital inputs, driving digital outputs, and detecting input change-of-state. Digital I/O direction is programmable separately for each port through software. A nine-position DIP switch is provided inside of the unit to select the power-up direction of Digital I/O Por ...

  • Intelligent Motion Systems UDAS-1001E - page 17

    UDAS-1001E Series Data Acquisition Systems 1-10 A diagram of the termination panel for the UDAS-1001E-4 unit is shown below. FIGURE 1.2 UDAS-1001E-4 dimensional drawing 6.600 5.750 7.290 1.520 ...

  • Intelligent Motion Systems UDAS-1001E - page 18

    1- 11 1.2.2 1.2.2 Power Power The UDAS unit normally uses power from the host computer via the USB cable. Power can also be obtained from an external power supply that is available (See Appendix B, Accessories ). When the UDAS unit is connected to a power source, the computer controls the power. The unit does not have a power switch. There is an LE ...

  • Intelligent Motion Systems UDAS-1001E - page 19

    UDAS-1001E Series Data Acquisition Systems 1-12 Visual Designer UDAS Support Library This support package provides the block functions necessary to acquire data and output data using the UDAS device. To use Visual Designer or the Visual Designer Evaluation Version with an UDAS unit, the Visual Designer UDAS Support Library must be installed on the ...

  • Intelligent Motion Systems UDAS-1001E - page 20

    2-1 Chapter 2 Chapter 2 Configuration and Configuration and Installation Installation 2.1 2.1 Introduction Introduction This chapter contains instructions on the configuration and installation of the UDAS unit. 2.2 2.2 Power-on Default Digital I/O Configuration Power-on Default Digital I/O Configuration In some situations, it is important to have t ...

  • Intelligent Motion Systems UDAS-1001E - page 21

    Configuration and Installation 2-2 Setting the Configuration Setting the Configuration Switches 1-8 set the initial levels of the port’s channels 0-7 if the port is set for output operation. A switch set to the On position sets the corresponding port’s output channel to a high level (TTL +5V) on power-up. FIGURE 2.1 UDAS Switch S1 0 0 0 0 0 0 H ...

  • Intelligent Motion Systems UDAS-1001E - page 22

    2-3 If you plan to use any of the digital I/O ports for output control in your application(s), note the following Caution statement: Locate switch S1 shown in FIGURE 2.1, UDAS Switch S1 in the lower left-hand corner of the board. 1. Set the direction for Port 1. The default setting is input ( Off ). To designate Port 1 as an output port: set switch ...

  • Intelligent Motion Systems UDAS-1001E - page 23

    Configuration and Installation 2-4 Channels connected to a thermocouple must be connected to bias resistors for proper operation. Use jumpers JP2 and JP3 . To select the jumpers for each channel that you plan to use for thermocouples, use TABLE 2.1, CJC Jumper Positions shown below. TABLE 2.1 CJC Jumper Positions Note: When monitoring thermocouples ...

  • Intelligent Motion Systems UDAS-1001E - page 24

    2-5 2.3 2.3 Connecting the UDAS Unit Connecting the UDAS Unit Making the Initial Connection Making the Initial Connection 1. With the computer powered up, connect the USB cable to the computer or hub. 2. Connect the other end of the USB cable to the UDAS unit. 3. Verify the red PWR LED located on the face plate of the UDAS unit illuminates. 4. The ...

  • Intelligent Motion Systems UDAS-1001E - page 25

    3-1 Chapter 3 Chapter 3 Checking the System Checking the System 3.1 3.1 Introduction Introduction This chapter contains instructions for installing and using the UDAS SYSCHECK software. The software contains diagnostic features that verify the UDAS unit is functioning. SYSCHECK is only an interface to the UDAS unit(s). The way that you interface in ...

  • Intelligent Motion Systems UDAS-1001E - page 26

    Checking the System 3-2 3.2 3.2 Installing and Running UDAS SYSCHECK Installing and Running UDAS SYSCHECK UDAS SYSCHECK provides an easy-to-use graphical interface for using and displaying the I/O capabilities of the UDAS unit. System Requirements System Requirements • UDAS SYSCHECK 1.0 only runs on Windows 98. • The installation requires appro ...

  • Intelligent Motion Systems UDAS-1001E - page 27

    3-3 3.3.1 Unit Info The Unit Info dialog displays the number of UDAS units detected and has a drop down list containing the serial number for each UDAS unit detected by SYSCHECK. FIGURE 3.1 Unit Info dialog If there is only one UDAS unit, the message shown beneath the drop down list displays the unit type and self-test results. When the self-test r ...

  • Intelligent Motion Systems UDAS-1001E - page 28

    Checking the System 3-4 3.3.2 System Check When the System Check tab is selected, a dialog containing buttons used to execute a variety of system test programs appears as shown in FIGURE 3.2, UDAS SYSCHECK System Check dialog . FIGURE 3.2 UDAS SYSCHECK System Check dialog The System Check tabbed dialog displays four major sub-functions possible on ...

  • Intelligent Motion Systems UDAS-1001E - page 29

    3-5 3.3.2.1 3.3.2.1 Analog Input Test Analog Input Test Click the Analog In button to access a new window specific to analog input. The UDAS SYSCHECK ANALOG INPUT dialog shown in FIGURE 3.3, UDAS SYSCHECK Analog Input Test of a UDAS unit appears. The analog input test performs software-based reading of the first 8 analog input channels on UDAS unit ...

  • Intelligent Motion Systems UDAS-1001E - page 30

    Checking the System 3-6 3.3.2.2 3.3.2.2 Analog Output Test Analog Output Test The analog output test controls the voltage on the analog output channels of the UDAS unit. In the UDAS SYSCHECK Test Category Selection Window, click the Analog Out button and the UDAS SYSCHECK ANALOG OUTPUT dialog shown in FIGURE 3.4, UDAS SYSCHECK Analog Output Test of ...

  • Intelligent Motion Systems UDAS-1001E - page 31

    3-7 3.3.2.3 3.3.2.3 Counter Test Counter Test The counter test monitors TTL transitions that are connected to the counter input of the UDAS unit. Depending on the mode that you select, the TTL level of the gate pin may effect the readings. For all of the modes except Measure frequency , data is automatically read and displayed four times per second ...

  • Intelligent Motion Systems UDAS-1001E - page 32

    Checking the System 3-8 For the Count when gate is high and the Count when gate is low modes, the TTL level of the gate enables or disables counting, depending on the mode that you set. If there is no input connected to the gate input, use the Count when the gate is in high mode. For the modes Measure input high period , Measure input low period , ...

  • Intelligent Motion Systems UDAS-1001E - page 33

    3-9 Select the desired Gate Time. The data displays shown at the lower portion of the dialog provide the status and the frequency in hertz. FIGURE 3.7 UDAS SYSCHECK Counter Test: Measure Frequency Mode The gate time is the amount of time that UDAS uses to count TTL transitions. This time base allows frequency to be calculated by the software. Longe ...

  • Intelligent Motion Systems UDAS-1001E - page 34

    Checking the System 3-10 Digital I/O Test Digital I/O Test The Digital Input/Output test enables you to read data from, or write data to, either 8-bit Digital I/O port on a UDAS unit. FIGURE 3.8, UDAS SYSCHECK Digital I/O Test shows an example test of the UDAS unit that has two 8-bit digital I/O ports. FIGURE 3.8 UDAS SYSCHECK Digital I/O Test Use ...

  • Intelligent Motion Systems UDAS-1001E - page 35

    3-11 3.3.3 Paced Analog Input The Paced Analog Input dialog enables you to configure a hardware-paced analog input process. Select the number of channels to include in the data run, select the gain, and select the single- ended/differential from drop-down lists in each field. See FIGURE 3.9, UDAS SYSCHECK Paced Analog Input Window . FIGURE 3.9 UDAS ...

  • Intelligent Motion Systems UDAS-1001E - page 36

    Checking the System 3-12 Clicking the High-Speed Run button (shown in FIGURE 3.9, UDAS SYSCHECK Paced Analog Input Window ) configures and starts the process. This launches a full screen window that displays the results of the run. FIGURE 3.10 High-Speed Aquisition Sample The time base is displayed on the x-axis and the voltages are displayed on th ...

  • Intelligent Motion Systems UDAS-1001E - page 37

    3-13 3.4 3.4 Troubleshooting Tips Troubleshooting Tips 3.4.1 Basic Troubleshooting If you are unable to successfully communicate with the UDAS unit, this section contains troubleshooting hints which may help identify the problem. Verify that all of the proper connections have been made between the computer, UDAS unit(s), and the equipment being mon ...

  • Intelligent Motion Systems UDAS-1001E - page 38

    Checking the System 3-14 UDAS Drivers UDAS Drivers Verify the UDAS system driver is properly installed by following the instructions for the USB Port (above). Click on the plus sign (+) located next to the Universal serial bus controller . When the directory opens, double-click III Taos USB Data Acquisition System . A pop-up window appears displayi ...

  • Intelligent Motion Systems UDAS-1001E - page 39

    3-15 • Check the wiring and cables for shorts or damage. If errors still persist after repeatedly checking the unit, check the technical support links on Intelligent Instrumentation’s web site http://www.instrument.com for the most current support information and contact addresses. Note: For units with USB cables connected directly to the compu ...

  • Intelligent Motion Systems UDAS-1001E - page 40

    A-1 Appendix A Appendix A Specifications Specifications A.1 A.1 UDAS-1001E Series Hardware Specifications UDAS-1001E Series Hardware Specifications All specifications are typical at 25ºC unless otherwise noted. Note: When powered from an external source, the on-board power supply circuit can supply up to 200mA at 5V DC to termination panels throug ...

  • Intelligent Motion Systems UDAS-1001E - page 41

    Specifications A-2 Noise Input grounded at connector (RMS) Gain <=10 1.0 LSB Gain = 100 1.2 DC Accuracy No missing codes, guaranteed Linearity Error ±0.024%FS (± 1LSB) Throughput 100 k Samples/second Analog Trigger (with AO option) Range ±10 V Hysterisis 28 mV Resolution 4.88 mV nominal Slope Pos/Neg Analog Outputs (Optional) Number of Channe ...

  • Intelligent Motion Systems UDAS-1001E - page 42

    A- 3 Resolution 32-Bit Number of Channels 1 Max Input frequency TTL-level input 2 MHz TimeBase Generator Type Crystal-based Rate Generator (24-Bit) Number 2 (1 analog input, 1 analog output) Resolution 125 ns Output Frequency Range 0.5 Hz to 1 Mhz Output Levels TTL-compatible Bus Interface Type USB Power Voltage Range USB or External +5 V Current A ...

  • Intelligent Motion Systems UDAS-1001E - page 43

    Specifications A-4 A.2 A.2 UDAS-1001E-3, UDAS-1001E-4 Dimensions UDAS-1001E-3, UDAS-1001E-4 Dimensions UDAS units are housed in standard metal enclosures made of a rugged extruded aluminum base (connected to chassis ground) with a vinyl-clad steel cover. Interior tracks on side rails hold the circuit board securely in place. This page provides the ...

  • Intelligent Motion Systems UDAS-1001E - page 44

    A- 5 FIGURE A.3 Dimensions of the UDAS unit (Bottom view) 4-40 FH SCREW 1.295 .525 4.700 4 PL 4.700 ...

  • Intelligent Motion Systems UDAS-1001E - page 45

    Specifications A-6 The dimensions of the UDAS PC board are shown below in FIGURE A.4 Dimensional Drawing of the UDAS series PCB . FIGURE A.4 Dimensional Drawing of the UDAS series PCB 4.70 0.21 1.16 4.70 7.02 MAXIMUM COMPONENT HEIGHT 0.60 0.15 6-32 HEX STANDOFF TYP, 4 PL 5.305 ...

  • Intelligent Motion Systems UDAS-1001E - page 46

    A- 7 A.3 A.3 UDAS I/O Connectors UDAS I/O Connectors Signal Name Pin Single Ended Input Function Differential Input Function AI0 1 Analog Input Channel 0 Analog Input Channel 0+ AI1 5 Analog Input Channel 1 Analog Input Channel 1+ AI2 7 Analog Input Channel 2 Analog Input Channel 2+ AI3 11 Analog Input Channel 3 Analog Input Channel 3+ AI4 13 Analo ...

  • Intelligent Motion Systems UDAS-1001E - page 47

    Specifications A-8 AO 0 21 Analog Output Channel 0 ** AO 1 21 Digital I/O bit ** Digital Port 0 bit 0 27 Digital I/O bit ** Digital Port 0 bit 1 28 Digital I/O bit ** Digital Port 0 bit 2 29 Digital I/O bit ** Digital Port 0 bit 3 30 Digital I/O bit ** Digital Port 0 bit 4 31 Digital I/O bit ** Digital Port 0 bit 5 32 Digital I/O bit ** Digital Por ...

  • Intelligent Motion Systems UDAS-1001E - page 48

    A- 9 External Input 47 External Trigger or Pacer input ** Digital Ground 49 Ground ** Digital Ground 50 Ground ** Unused 12 ** Unused 45 ** Signal Name Pin Single Ended Input Function Differential Input Function TABLE A.2 UDAS I/O Connectors (Continued) ...

  • Intelligent Motion Systems UDAS-1001E - page 49

    B-1 Appendix B Appendix B Accessories Accessories This appendix includes information on the termination and mounting accessories that are available separately from Intelligent Instrumentation for the UDAS unit. TABLE B.1, Accessories for the UDAS-1001E Series provides the model numbers for the UDAS units, the cables, and the power adpaters. UDAS Mo ...

  • Intelligent Motion Systems UDAS-1001E - page 50

    Accessories B-2 B.1 B.1 UDAS Termination Panels UDAS Termination Panels The Termination Panel plugs directly into the I/O connectors of the UDAS unit, providing 32 channels of digital I/O through four screw-type terminal strips. Stand-off nuts on the UDAS unit secure the termination panel in place. B.1.1 B.1.1 PCI-20429T-1 Multifunction PCI-20429T- ...

  • Intelligent Motion Systems UDAS-1001E - page 51

    B- 3 FIGURE B.2, PCI-20429T-1 Multifunction Termination Panel shows the signals assigned to each terminal block on this panel. FIGURE B.2 PCI-20429T-1 Multifunction Termination Panel PORT 0 PORT 1 AGND AGND AGND AGND AGND AO0 AO1 AI0 AI1 AI2 AI3 AI4 AI5 AI6 AI7 AI8 AI9 AI10 AI11 AI12 AI13 AI14 AI15 AGND DGND DGND DGND AIRG EXTIN DI0 DI1 DI2 DI3 DI4 ...

  • Intelligent Motion Systems UDAS-1001E - page 52

    Accessories B-4 B.1.2 B.1.2 UDAS Termination and Signal Conditioning Options UDAS Termination and Signal Conditioning Options FIGURE B.3, UDAS-1001E Termination Options uses the various UDAS-compatible termination panels currently available from Intelligent Instrumentation. Also reference FIGURE B.4, UDAS- 1001E Termination Options (continued) . Th ...

  • Intelligent Motion Systems UDAS-1001E - page 53

    B- 5 FIGURE B.4 UDAS-1001E Termination Options (continued) PCI - 20324T - 1 Opto - Isolated Digital I/O Panel 8 Channels for use with 1100 Series PCI - 20326T - 1 Opto - Isolated Digital I/O Expander Panel 8 Extra Channels for use with 1100 Series Relay Output Panel PCI - 20355T - 1 16 Outputs PCI - 20361T - 1 Opto - Isolated Digital Input Panel 16 ...

  • Intelligent Motion Systems UDAS-1001E - page 54

    Accessories B-6 FIGURE B.5 Diagram of the PCI-20430A-1’s connectors and cables P2 P3 + 5 Volts Port 0: Bit 0 or Counter In Digital Ground Port 1: Bit 0 No Connection Digital Ground Analog Input Rate Generator Out No Connection External Input P4 + 5 Volts Digital Ground No Connection Digital Ground No Connection No Connection Analog In Single-Ende ...

  • Intelligent Motion Systems UDAS-1001E - page 55

    B- 7 B.1.3 B.1.3 Isolator Blocks Isolator Blocks PCI-1100 Series Digital Opto-Isolator Blocks PCI-1100 Series Digital Opto-Isolator Blocks The PCI-1100 Series are digital, optically isolated, signal conditioning blocks. A separate opto- block is used for each channel, allowing complete I/O flexibility. The twelve different opto-blocks are divided i ...

  • Intelligent Motion Systems UDAS-1001E - page 56

    C-1 Appendix C Appendix C Analog Input and Output Analog Input and Output Calibration Procedures Calibration Procedures C.1 C.1 UDAS Analog Input Circuit Calibration UDAS Analog Input Circuit Calibration Procedures Procedures The analog input section of each UDAS unit is calibrated at the factory prior to shipment. If your application requires peri ...

  • Intelligent Motion Systems UDAS-1001E - page 57

    Analog Input and Output Calibration Procedures C-2 4. Connect the UDAS to the host computer and allow at least a 15 minute warm-up period before performing the adjustments. FIGURE C.1 Locations of Potentiometers for Adjusting Analog Circuits on page C-2 shows the locations of the potentiometers used to adjust the analog circuits on a UDAS unit. FIG ...

  • Intelligent Motion Systems UDAS-1001E - page 58

    C-3 C.1.2 C.1.2 Analog Input Calibration Procedure Analog Input Calibration Procedure Calibrating the analog input section requires adjusting the input offset voltage, the ± 10V range, ± 5V range, and the 0 to 10V range. The procedures are listed separately, but should be performed during a single calibration session. Adjust Input Offset Voltage ...

  • Intelligent Motion Systems UDAS-1001E - page 59

    Analog Input and Output Calibration Procedures C-4 . 7. Set the calibrated input to 9.5068 V. 8. Adjust Pot R46 for 9.5068 V. 9. Repeat the procedure and verify the adjustments are correct. 10. Set the precision voltage source to -9.95117 V and check for a reading of -9.95117. Adjust Offset and Gain for ± 5Volt Input Range Adjust Offset and Gain f ...

  • Intelligent Motion Systems UDAS-1001E - page 60

    C-5 9. Repeat the procedure and verify the adjustments are correct. Adjust Offset and Gain for 0 to 10 Volt Range Adjust Offset and Gain for 0 to 10 Volt Range 1. Verify the termination panel is attached to the 50-pin connector of a UDAS unit. Begin with step 2 if the unit has built-in termination. 2. Attach a voltage calibrator to channel 0 with a ...

  • Intelligent Motion Systems UDAS-1001E - page 61

    Analog Input and Output Calibration Procedures C-6 C.2 C.2 UDAS Analog Output Circuit Calibration UDAS Analog Output Circuit Calibration Procedure Procedure This section applies to models UDAS-1001E-2 , UDAS-1001E-2G , and UDAS-1001E-4 that are equipped with the analog output feature. The analog output channels on the UDAS unit are calibrated at th ...

  • Intelligent Motion Systems UDAS-1001E - page 62

    C-7 Analog Output Channel 0 Offset and Gain Analog Output Channel 0 Offset and Gain 1. Verify the termination panel is attached to a 50-pin connector of a UDAS unit. Begin with step 2 if the unit has built-in termination. 2. Attach a multimeter to analog output channel 0. 3. Use SYSCHECK or other software to set analog output channel 0 to -10.000 V ...

  • Intelligent Motion Systems UDAS-1001E - page 63

    Index-1 A analog input 1-3, 1-4 paced 3-11 test 3-5 analog output 1-3, 1-8 test 3-6 auto zero mode 1-8 B bias resistors 2-4 block diagram, UDAS system 1-2 C cable pinout B-6 calibration analog input procedure C-3 equipment C-1 CJC circuit 1-9 enabling 2-3 clock generator clock rate 3-11 configuration setting for switches 2-2 counter 1-4 event 1-9 t ...

  • Intelligent Motion Systems UDAS-1001E - page 64

    Index Index-2 L LabView 5.0 support library 1-3 library LabVIEW Support 1-3 U-Link software for Windows 98 1-3 Visual Designer Support 1-3 library, software support 1-2 load limitations 1-11 low-level drivers, verifying 3-13 N number of channels 3-11 P paced analog input 3-11 pacer rate 3-11 port settings 2-3 power 1-11 LED 3-14 supply, external 1- ...

  • Intelligent Motion Systems UDAS-1001E - page 65

    Index-3 initial connection 2-5 models 1-1 serial number 3-3 UDAS-1001E-1 1-1 UDAS-1001E-1G 1-1 UDAS-1001E-2 1-1 UDAS-1001E-2G 1-1 UDAS-1001E-3 1-1 UDAS-1001E-4 1-1 U-Link software libraries for Windows 98 1-3 unit info, serial number 3-3 Universal Serial Bus (USB) 1-1 USB cable connections 2-5 V verifying USB port 3-13 Visual Designer application g ...

Manufacturer Intelligent Motion Systems Category Computer Hardware

Documents that we receive from a manufacturer of a Intelligent Motion Systems UDAS-1001E can be divided into several groups. They are, among others:
- Intelligent Motion Systems technical drawings
- UDAS-1001E manuals
- Intelligent Motion Systems product data sheets
- information booklets
- or energy labels Intelligent Motion Systems UDAS-1001E
All of them are important, but the most important information from the point of view of use of the device are in the user manual Intelligent Motion Systems UDAS-1001E.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Intelligent Motion Systems UDAS-1001E, service manual, brief instructions and user manuals Intelligent Motion Systems UDAS-1001E. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Intelligent Motion Systems UDAS-1001E.

Similar manuals

A complete manual for the device Intelligent Motion Systems UDAS-1001E, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Intelligent Motion Systems UDAS-1001E by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Intelligent Motion Systems UDAS-1001E.

A complete Intelligent Motion Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Intelligent Motion Systems UDAS-1001E - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Intelligent Motion Systems UDAS-1001E, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Intelligent Motion Systems UDAS-1001E, that we can find in the current document
3. Tips how to use the basic functions of the device Intelligent Motion Systems UDAS-1001E - which should help us in our first steps of using Intelligent Motion Systems UDAS-1001E
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Intelligent Motion Systems UDAS-1001E
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Intelligent Motion Systems UDAS-1001E in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Intelligent Motion Systems UDAS-1001E?

Use the form below

If you did not solve your problem by using a manual Intelligent Motion Systems UDAS-1001E, ask a question using the form below. If a user had a similar problem with Intelligent Motion Systems UDAS-1001E it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)