English dropdown-ico

Manual Seagate ST15230W/WD/WC

40 pages 0.3 mb
Download

Go to site of 40

Summary
  • Seagate ST15230W/WD/WC - page 1

    HA WK 4 F amil y: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Wide Bus) ST15230W/WD/WC . . . . . . . . . . . . . . . . . . . . . . . ST15230DC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation Guide ...

  • Seagate ST15230W/WD/WC - page 2

    Contents Introduction ........................................................... 1 Electromagnetic interference ................................ 1 Before you begin .................................................. 3 Installation overview ....................................... 8 Product repair information .................................... 10 S ...

  • Seagate ST15230W/WD/WC - page 3

    Hawk 4 (Wide) Family Install Guide, Rev. A 1 ___________________________________________ Introduction Before attempting any installation, please read through all applicable sections of this document, including all warnings and cautions. Warning. This equipment generates, uses and can radiate radio frequency energy and if not installed in accordance ...

  • Seagate ST15230W/WD/WC - page 4

    2 Hawk 4 (Wide) Family Install Guide, Rev. A ___________________________________________ The physical design characteristics of the drive(s) described herein, serve to minimize EMI radiation when installed in an enclosure that provides reason- able shielding. As such, the drive(s) are capable of meeting the Class B limits of the FCC Rules and the R ...

  • Seagate ST15230W/WD/WC - page 5

    Hawk 4 (Wide) Family Install Guide, Rev. A 3 ___________________________________________ Before you begin Verify that the system is switched off and discon- nected from main power before any installation is attempted. Protect yourself, the drive, and your valuable pro- grams and data by reading the following cautions and warnings. • Do not unpack ...

  • Seagate ST15230W/WD/WC - page 6

    4 Hawk 4 (Wide) Family Install Guide, Rev. A ___________________________________________ • Inspect drive for possible shipping damage. All claims of this type should be filed promptly with the trans- porter involved. Save original packing materials to be used when reshipping. • Verify all parts listed on shipping bill are received with the equi ...

  • Seagate ST15230W/WD/WC - page 7

    Hawk 4 (Wide) Family Install Guide, Rev. A 5 ___________________________________________ To insure optimum reliable equipment op- eration, it is required that technical support personnel discharge themselves by wearing a grounding strap around the wrist and be connected to a grounding terminal while working in the vicinity of, and while handling EO ...

  • Seagate ST15230W/WD/WC - page 8

    6 Hawk 4 (Wide) Family Install Guide, Rev. A ___________________________________________ Safety instructions 1. The disc drive(s) are to be installed in a customer supplied enclosure where the surrounding air does not exceed 50 o C. 2. Four (4) 6-32 UNC-2A screws are required for installation. Maximum screw length into side of drive is 0.15 inches ...

  • Seagate ST15230W/WD/WC - page 9

    Hawk 4 (Wide) Family Install Guide, Rev. A 7 ___________________________________________ Sicherheitsanleitung 1. Däs Gerät ist ein Einbaugerät, vorgesehen für eine maximale Umgebungstemperatur von 50 o C. 2. Zur Befestigung der Drive werden 4 Schrauben benötigt (6-32 UNC-2A). Die maximale Länge der Schrauben in der unteren Seite des Chassis d ...

  • Seagate ST15230W/WD/WC - page 10

    8 Hawk 4 (Wide) Family Install Guide, Rev. A ___________________________________________ Installation Overview Installation of the drive can be divided into distinct phases as outlined below. Some of these may not be applicable to your particular installation requirements. Refer to the individual drive installation sections for specific information ...

  • Seagate ST15230W/WD/WC - page 11

    Hawk 4 (Wide) Family Install Guide, Rev. A 9 ___________________________________________ • Low-level formatting: After the drive has been properly configured for the system, it does not need to be low-level formatted, as this has been done by the factory and does not require this step during installation. (The low-level format writes the sector b ...

  • Seagate ST15230W/WD/WC - page 12

    10 Hawk 4 (Wide) Family Install Guide, Rev. A ___________________________________________ Product repair information Service requirements The special facilities required for the manufacture of these drives generally prohibit repair in the field. If problems occur during installation, please contact your supplier for assistance. Do not attempt to di ...

  • Seagate ST15230W/WD/WC - page 13

    Hawk 4 (Wide) Family Install Guide, Rev. A 11 ___________________________________________ Shipping: When transporting or shipping a drive, a Seagate approved container must be used. Keep your original box. They are easily identified by the Seagate Approved Package label. Shipping a drive in a non- approved container voids the drive warranty. Seagat ...

  • Seagate ST15230W/WD/WC - page 14

    12 Hawk 4 (Wide) Family Install Guide, Rev. A ___________________________________________ If the drive is no longer under warranty contact pur- chase source for repair information or refer to numbers listed in the following paragraph . Technical support services Please contact your dealer for technical support and installation troubleshooting. Prod ...

  • Seagate ST15230W/WD/WC - page 15

    Hawk 4 (Wide) Family Install Guide, Rev. A 13 ___________________________________________ SeaTDD: 408/438-5382 TDD is a Telecommunication Device for the Deaf where two people can communicate using a keyboard that is connected to the phone line. A TDD device is required to access this service. This service is available from 8:00 AM to 5:00 PM PST, M ...

  • Seagate ST15230W/WD/WC - page 16

    14 Hawk 4 (Wide) Family Install Guide, Rev. A ___________________________________________ With this service you can access: • Specifications and jumper configurations for all Seagate products. • Reprints of Seagate documentation. • A directory of information and helpful utilities that you can download to your own computer. BBS Modem Location ...

  • Seagate ST15230W/WD/WC - page 17

    Hawk 4 (Wide) Family Install Guide, Rev. A 15 ___________________________________________ Drive specifications Product Hawk 4 family (wide) Information ST15230W ST15230WD ST15230WC ST15230DC Interface [7] SCSI-2 Fast SCSI-2 Fast Cache Type Multi-segmented, 256 Kb* Capacity MB Unformatted 5170 5170 Formatted [1] 4294 4294 Cylinders 3992 3992 Heads 1 ...

  • Seagate ST15230W/WD/WC - page 18

    16 Hawk 4 (Wide) Family Install Guide, Rev. A ___________________________________________ Notes. [1] Standard units are factory formatted with 512 data bytes per sector. ST15230 OEM standard models have twelve spare sectors per cylinder and 2 cylinders at inner tracks reserved for spares. [2] Does not Include on-board controller overhead. [3] Maxim ...

  • Seagate ST15230W/WD/WC - page 19

    Hawk 4 (Wide) Family Install Guide, Rev. A 17 ___________________________________________ Initial setup information For the initial setup connect the cables, set the SCSI bus address and enable or disable (as required by system configuration), the SCSI I/O line terminator resistors (model "W" drives only). Note whether the drive model num ...

  • Seagate ST15230W/WD/WC - page 20

    DC Power Connector Pin 1P 2P 3P 4P Power +12V +12V ret + 5V ret + 5V J1 1P 2P 3P 4P 68 Pin SCSI I/O Connector J1-Auxiliary 18 Hawk 4 (Wide) Family Install Guide, Rev. A ___________________________________________ Figure 1. DC power connection, 68 pin SCSI I/O connector ST15230WC and ST15230DC model drives receive power ...

  • Seagate ST15230W/WD/WC - page 21

    Hawk 4 (Wide) Family Install Guide, Rev. A 19 ___________________________________________ If the drive LED shows no on/off activity when the host is trying to communicate with it, an incorrect bus address selection at the drive (or remote ID select location) should be suspected. On "WC and DC" model drives the SCSI ID can be and presumabl ...

  • Seagate ST15230W/WD/WC - page 22

    20 Hawk 4 (Wide) Family Install Guide, Rev. A ___________________________________________ Model numbers that end in "WD and DC" have differen- tial I/O circuits and these drives and "WC" model drives have no provisions for terminators on the drive PCB. The system manufacturer must provide some external means of I/O line terminat ...

  • Seagate ST15230W/WD/WC - page 23

    J1-Auxiliary Pin 1A 68 Pin SCSI I/O Connector J1-DC Power Pin 1P J6 J2 J1 Pin 1 J6 J2 Pin 1 80 Pin SCSI I/O and DC Power Connector Hawk 4 (Wide) Family Install Guide, Rev. A 21 ___________________________________________ Figure 2a. Hawk 4 family ST15230W/WD model I/O con- nection 68 pin SCSI I/O and DC power con- nector). Termi ...

  • Seagate ST15230W/WD/WC - page 24

    22 Hawk 4 (Wide) Family Install Guide, Rev. A ___________________________________________ Drive configuration Each disc drive has option select header connectors on the back, side and front where jumper plugs are in- stalled to select the way that the drive is to be config- ured and to select its ID (0 - 15) on the I/O bus. See "Initial set-up ...

  • Seagate ST15230W/WD/WC - page 25

    Hawk 4 (Wide) Family Install Guide, Rev. A 23 ___________________________________________ ST15230WC/DC family 80 pin SCSI I/O drives On Hawk 4 family, ST15230WC/DC model drives there is no J1-auxiliary. J6 can be used to set drive ID, but the host probably does it over the 80 pin interface. J6 may be used to drive the external drive activity LED. T ...

  • Seagate ST15230W/WD/WC - page 26

    J1-DC Power Connector J2 Drive Front Pin 1 End J6 SCSI I/O Connector J1- SCSI I/O Pin 1 J2 J1- Auxiliary See  Figure 3b Drive with HDA up, PCB down, viewed from front Pin 1 HDA J6 [1] SCS I ID = 0 SCS I ID = 1 SCS I ID = 2 SCS I ID = 3 SCS I ID = 4 SCS I ID = 5 SCS I ID = 6 SCS I ID = 7 Reserved A 2 A 1 A 0 [7] Delay Moto ...

  • Seagate ST15230W/WD/WC - page 27

    Figure 3b. Drive configurator Hawk 4 family ST15230W/WD model (Wide bus) J1-DC Power J1 68 Pin SCSI I/O Connector Drive HDA SCSI ID = 8 SCSI ID = 9 SCSI ID = 10 SCSI ID = 11 SCSI ID = 12 SCSI ID = 13 SCSI ID = 14 SCSI ID = 15 A 3 A 2 A 1 SCSI ID = 0 SCSI ID = 1 SCSI ID = 2 SCSI ID = 3 SCSI ID = 4 SCSI ID = 5 SCSI ID = 6 SCSI ID = 7 A 0 [3] J1 ...

  • Seagate ST15230W/WD/WC - page 28

    Figure 3c. Drive configurator Hawk 4 family ST15230WC/DC model (Wide bus) Pin 1 J2 J1 J2 Drive Front Pin 1 End J6 Pin 1 HDA Drive with HDA up, PCB down, viewed from front J6 [1] Delay Motor Start Enable Motor Start Write Protect Parity Option Jumper Positions T E D S M E W P P E S S T P T P [5] [3] [8] +5V Gro ...

  • Seagate ST15230W/WD/WC - page 29

    Hawk 4 (Wide) Family Install Guide, Rev. A 27 ___________________________________________ Notes for Figure 3a, 3b and 3c: [1] Notes explaining the functions of the various jump- ers on jumper header connectors J2, J1-auxiliary and J6 are given below in left to right order of jumper position. The term " default " means as standard OEM unit ...

  • Seagate ST15230W/WD/WC - page 30

    28 Hawk 4 (Wide) Family Install Guide, Rev. A ___________________________________________ [4] The drive time-shares the ID and LED functions of J6 and J1-auxiliary. That is, a cable may be at- tached to one of these headers to pick up the signal that lights the external LED indicator. If lines for external ID selection are not also included in the ...

  • Seagate ST15230W/WD/WC - page 31

    Hawk 4 (Wide) Family Install Guide, Rev. A 29 ___________________________________________ J2 Jumper. Position Jumper Function Description TE (Applies to "W" models only) On With the jumper installed, the optional on- board (non-removable) terminator circuits are enabled (connected to the I/O lines). Default is jumper installed. Off Termin ...

  • Seagate ST15230W/WD/WC - page 32

    30 Hawk 4 (Wide) Family Install Guide, Rev. A ___________________________________________ continued from previous page WP On Entire drive is write protected. Off Drive is not write protected. Default is no WP jumper installed. PE On Parity checking and parity error reporting by the drive is enabled. Default is PE jumper installed. Off Drive does no ...

  • Seagate ST15230W/WD/WC - page 33

    Hawk 4 (Wide) Family Install Guide, Rev. A 31 ___________________________________________ continued from previous page TP TP (Not applicable to "WC and DC" model drives) Off Off No terminator power is connected to drive terminators or SCSI bus I/O pin 26. On Off Drive supplies its own terminator power only. Jumper on this position is fact ...

  • Seagate ST15230W/WD/WC - page 34

    32 Hawk 4 (Wide) Family Install Guide, Rev. A ___________________________________________ J6 and J1-Auxiliary Jumper Installation Jumper Function Description A 3 ,A 2 ,A 1 ,A 0 * Drive ID on SCSI Bus. The drive ID is binary coded positionwise i.e., jumper in position A 3 is drive ID 8, in position A 2 is drive ID 4, in position A 1 is ID 2, positio ...

  • Seagate ST15230W/WD/WC - page 35

    Hawk 4 (Wide) Family Install Guide, Rev. A 33 ___________________________________________ Drive installation This section describes the physical mounting of the drive in the host cabinet and the logical installation as a system member, which is called drive setup. Disc drive mounting Do not touch the connector pins or any PCB compo- nents without o ...

  • Seagate ST15230W/WD/WC - page 36

    Figure 4. Hawk 4 family ST15230W/WD model drive mounting dimensions (68 pin SCSI I/O connector) A F D E C [1] [3] B G J H K [2] Notes: [1] [2] [3] [4] Inches Millimeters 5.74  4.00  1.620 2.362 .620 4.000 .250 1.750 3.750 2.370 1.725 4.000 0.19  0.015 145.80  101.60  41.15  60.00  15.75 ? ...

  • Seagate ST15230W/WD/WC - page 37

    Figure 5. Hawk 4 family ST15230WC/DC model drive mounting configuration dimension (80 pin I/O connector) A F D E C [1] [3] B G J H K [2] Notes: [1] [2] [3] [4] Inches Millimeters 5.74  4.00  1.620 2.362 .620 4.000 .250 1.750 3.750 2.370 0.181 145.80  101.60  41.15  60.00  15.75  101.60  6.35 ...

  • Seagate ST15230W/WD/WC - page 38

    36 Hawk 4 (Wide) Family Install Guide, Rev. A ___________________________________________ Do not power up the host system until the drive is mounted and the system cover is replaced. • Connect DC power connector to the drive. (does not apply to "WC and DC" models which have DC power lines in the 80 pin I/O connector). • Replace the Ho ...

  • Seagate ST15230W/WD/WC - page 39

    Hawk 4 (Wide) Family Install Guide, Rev. A 37 ___________________________________________ SCSI interface drives The SCSI interface handles both drive geometry and defect management internally. The "no drive installed" option is selected for systems with SCSI drives. All SCSI interface drives are low-level formatted at the factory. You may ...

  • Seagate ST15230W/WD/WC - page 40

    Seagate Technology, Inc. 920 Disc Drive Scotts Valley, CA. 95066-4544, USA Publication Number: 77767477, Rev. A Printed in USA ...

Manufacturer Seagate Category Computer Drive

Documents that we receive from a manufacturer of a Seagate ST15230W/WD/WC can be divided into several groups. They are, among others:
- Seagate technical drawings
- ST15230W/WD/WC manuals
- Seagate product data sheets
- information booklets
- or energy labels Seagate ST15230W/WD/WC
All of them are important, but the most important information from the point of view of use of the device are in the user manual Seagate ST15230W/WD/WC.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Seagate ST15230W/WD/WC, service manual, brief instructions and user manuals Seagate ST15230W/WD/WC. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Seagate ST15230W/WD/WC.

Similar manuals

A complete manual for the device Seagate ST15230W/WD/WC, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Seagate ST15230W/WD/WC by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Seagate ST15230W/WD/WC.

A complete Seagate manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Seagate ST15230W/WD/WC - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Seagate ST15230W/WD/WC, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Seagate ST15230W/WD/WC, that we can find in the current document
3. Tips how to use the basic functions of the device Seagate ST15230W/WD/WC - which should help us in our first steps of using Seagate ST15230W/WD/WC
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Seagate ST15230W/WD/WC
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Seagate ST15230W/WD/WC in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Seagate ST15230W/WD/WC?

Use the form below

If you did not solve your problem by using a manual Seagate ST15230W/WD/WC, ask a question using the form below. If a user had a similar problem with Seagate ST15230W/WD/WC it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)