English dropdown-ico

Manual Sigma RC 1209

36 pages Not applicable
Download

Go to site of 36

Summary
  • Sigma RC 1209 - page 1

    SI SK CZ PL US/GB HU RU R C 1209 www.sigmasport.com RUNNING COMPUTER SPEED – DIST ANCE – HEART RATE RuNNINg COMPuTER SI SK CZ PL US/GB HU RU ...

  • Sigma RC 1209 - page 2

    206 www.sigmasport.com 1 Foreword 208 2 Package contents 208 3 Safety guidelines 209 4 Overview 209 4.1 Attaching R3 transmitter 209 4.1.1 Chest belt application 210 4.1.2 HipClip application 210 4.2 Before the first training 211 4.3 Pressing the button briefly and h olding 212 4.4 Overview of modes and functions 213 4.4.1 Sleep mode 214 4.4.2 Trai ...

  • Sigma RC 1209 - page 3

    207 US/GB 5.5.14 Setting the total distance 224 5.5.15 Setting the total running time 225 5.5.16 Setting total calories 225 5.5.17 Setting the contrast 225 5.5.18 Setting the button tones 225 5.5.19 Turning the zone alarm on and off 225 6 Calibration and correction factor 226 6.1 Why calibrate? 226 6.2 Calibration function 226 6.3 Activating calibr ...

  • Sigma RC 1209 - page 4

    208 www.sigmasport.com 1 FOREWORD Congratulations and thank you for purchasing a SIGMA SPORT ® Running Computer. Your new running computer will be a faithful training partner for many years to come. You can use your running computer for: k Running k Walking and Nordic Walking k Hiking k Swimming (HR only) The running computer RC 1209 is a technica ...

  • Sigma RC 1209 - page 5

    209 US/GB 2 PACKAGE CONTENTS R3 transmitter incl. battery for measuring speed, heart rate and distance. The R3 transmitter sends coded digital signals to your RC 1209. HipClip for R3 transmitter to train without heart rate, but with speed and distance. 3 SAFETY GUIDELINES 4 OVERVIEW k Consult your doctor before starting training in order to avoid h ...

  • Sigma RC 1209 - page 6

    210 www.sigmasport.com 4 OVERVIEW 4.1.1 CHEST BELT APPLICATION 4.1.2 HIPCLIP APPLICATION Press the R3 transmitter into the snaps of the chest belt. Important: Detach the R3 transmitter from the belt after training in order to save the battery. The transmitter always becomes active if a current flows between the two contacts. This is the case when t ...

  • Sigma RC 1209 - page 7

    211 US/GB 4 OVERVIEW Attach the HipClip centered on your pants. Important: Speed and distance are measured correctly only if you wear the HipClip on the front center. Before you can start with the first training, you need to prepare the running computer in the following manner: 4.2 BEFORE THE FIRST TRAINING 1. Set the battery compartment cover to O ...

  • Sigma RC 1209 - page 8

    212 www.sigmasport.com 4 OVERVIEW 4. Calibrating For the running computer to display the optimal results, you need to calibrate it (for details see section 6 “Calibration”. In the setting mode scroll to “Calibration & Correction Factor”. Press the SET button. The running computer guides you through the calibration. After calibration, yo ...

  • Sigma RC 1209 - page 9

    213 US/GB 4 OVERVIEW 4.4 OVERVIEW OF MODES AND FUNCTIONS There are three main modes to the Running Computer. (Sleep mode, training mode, setting mode). Switching between these modes requires that you press and hold a button for 3 seconds. Sleep mode Setting mode Press and hold one of the buttons Press and hold Training mode Press and hold Press and ...

  • Sigma RC 1209 - page 10

    214 www.sigmasport.com 4 OVERVIEW You will train in this mode. *Note: Total values are displayed only if the stopwatch is not running. PULSE k Average heart rate k Maximum heart rate k Calories k Total Kcal* SET k Distance (in km or mi) k Speed (in km/h or min/km) START/STOP k Stopwatch LIGHT SPEED k Running time k Average speed k Maximum speed k C ...

  • Sigma RC 1209 - page 11

    215 US/GB Language (ES, FR, IT, GB, DE) Zone alarm (On, Off) Button tones (On, Off) Unit (km/h, mph, min/km, min/mile) Contrast (5 levels) Calibration (running/walking required) Total Kcal (enter) Date (enter, format) Correction factor (enter, format) Total running time (enter) Clock (enter, + 12 h, 24 h) Total distance (enter) Gender (male, female ...

  • Sigma RC 1209 - page 12

    216 www.sigmasport.com 5.1 OPENING THE SETTING MODE Prerequisite: your running computer must first be in training mode (see section 4.3 “Overview of modes and functions”). Press and hold the SET button for 3 seconds. When the display flashes twice, the setting mode is open. 5 SETTING MODE 5.2 DISPLAY SETUP 5.3 BUTTON ASSIGNMENT IN SETTING 1 st ...

  • Sigma RC 1209 - page 13

    217 US/GB 5.4 BRIEF GUIDE TO DEVICE SETTINGS Your device settings such as language, unit, correction factor, gender, birth date, weight, HR max., contrast, button tones and zone alarm are all set in the same manner: Select the device setting, change the value and save the modified setting. Prerequisite: Your running computer must be in the setting ...

  • Sigma RC 1209 - page 14

    218 www.sigmasport.com 5.5.5 SETTING DATE 5 SETTING MODE Prerequisite: Your running computer is in the setting mode. Press SPEED (+) button repeatedly until “Date” appears on the display. Press SET button. “Year” is displayed, below it the preset year flashes. Now you can set the year with the SPEED (+) or PULSE (-) key. Press SET button. ? ...

  • Sigma RC 1209 - page 15

    219 US/GB Press SPEED (+) button repeatedly until “Clock” appears on the display. Press SET button. “24H” appears and flash es. With the SPEED (+) or PULSE (-) button choose between a 12-hour or 24-hour display. Press SET button. The time is displayed. The hours entry flashes. Press SPEED (+) or PULSE (-) to change the hour. Press SET butto ...

  • Sigma RC 1209 - page 16

    220 www.sigmasport.com 5.5.7 SETTING GENDER Follow steps 1-4 as described in section 5.4 “Brief guide to device settings” This device setting is included in the calculation of the maximum heart rate and the calories. So, set the value correctly. 5 SETTING MODE 5.5.8 SETTING BIRTH DATE 5.5.9 SETTING WEIGHT 5.5.10 SETTING HR MAX. Follow steps 1-4 ...

  • Sigma RC 1209 - page 17

    221 US/GB 5.5.11 SETTING TRAINING ZONE You can choose from three training zones. The upper and lower limits for the zone alarm are determined by the zone that you select. Example: You want to lose weight. Select the “Fat Burning” zone. Prerequisite: Your running computer is in the setting mode. 5 SETTING MODE Press PULSE (-) button repeatedly u ...

  • Sigma RC 1209 - page 18

    222 www.sigmasport.com Scroll with the SPEED (+) button until “Train. Zone” appears on the display. 5.5.13 SETTING UP THE INDIVIDUAL TRAINING ZONE 5 SETTING MODE Example: You would like to train in an individual training zone for a run with change of pace. The pulse range should lie between 120 and 160. Prerequisite: Your running computer is in ...

  • Sigma RC 1209 - page 19

    223 US/GB Press SET button. “Upper Limit” is displayed. The registered value flashes. Press the SPEED (+) button repeatedly until the value is 160 Press SET button. The upper and lower li mits are set. Press SET button. The selected tra ining zone is displayed. 5 SETTING MODE Scroll with the SPEED (+) button to “Individual”. Press SET butto ...

  • Sigma RC 1209 - page 20

    224 www.sigmasport.com 5.5.14 SETTING THE TOTAL DISTANCE 5 SETTING MODE Example: You bought a running computer and want to take the total distance of 560 kilometers from your training diary. Prerequisite: Your running computer displays the setting mode. Scroll with the SPEED (+) button until “Total Dist.” appears on the display. Press SET butto ...

  • Sigma RC 1209 - page 21

    225 US/GB Press the PULSE (-) button repeatedly till 6 displayed. Press SET button. The 6 is set and th e digit flashes. Press SET button. The setting is saved. 5.5.14 SETTING THE TOTAL DISTANCE 5 SETTING MODE 5.5.15 SETTING TOTAL RUNNING TIME 5.5.16 SETTING TOTAL CALORIES 5.5.17 SETTING CONTRAST 5.5.18 SETTING BUTTON TONES 5.5.19 TURNING THE ZONE ...

  • Sigma RC 1209 - page 22

    226 www.sigmasport.com 6 CALIBRATION & CORRECTION FACTOR 6.1 WHY CALIBRATE? 6.2 CALIBRATION FUNCTION Everyone has a different walking and running style, which affects the measurement. Therefore, you should set up (calibrate) the R3 transmitter for your running and walking style. If you use the factory presets, the running computer may or may no ...

  • Sigma RC 1209 - page 23

    227 US/GB 6.3 ACTIVATING CALIBRATION Prerequisite: The device is in training mode. You are wearing both the R3 transmitter and the running computer. 6 CALIBRATION & CORRECTION FACTOR Press and hold the SET button until the setting mode is open. Press the SPEED (+) button repeatedly until the function “Calibration” appears. Press the SET but ...

  • Sigma RC 1209 - page 24

    228 www.sigmasport.com 6.4.1 PREPARING FOR CALIBRATION 1 Put on the chest belt or attach the HipClip. 2 Go to a measured distance of at least 800 meters long. Tip: The inside lane of a track is 400 meters. 3 Select “calibration” in the setting mode. 4 Press the SET button. The running computer detects whether you carry the HipClip or the chest ...

  • Sigma RC 1209 - page 25

    229 US/GB 6.5 CORRECTION FACTOR If you get good values with or without calibration, which vary only minimally in one direction, you have the option to manually correct these values by the correction factor. Example: You know that you have run exactly 2000 m, but the running computer always shows a little more, e.g. 2037 m. The factory setting of th ...

  • Sigma RC 1209 - page 26

    230 www.sigmasport.com 7.1 OPENING THE TRAINING MODE To go into training mode: k From sleep mode Press and hold any button for 3 seconds. k From setting mode Press and hold SET button for 3 seconds. 7 TRAINING MODE 7.2 DISPLAY SETUP k Arrow next to pulse display In the example, the heart rate is below the selected training zone and should be increa ...

  • Sigma RC 1209 - page 27

    231 US/GB 7 TRAINING MODE 7.3 BUTTON ASSIGNMENT IN THE TRAINING MODE START/STOP Press: Starts/stops stopwatch Press and hold: Set training values to zero (reset) SET Press: Displays speed or distance Press and hold: Opens the setting mode LIGHT Press: Light on PULSE Press: Displays HR functions Press and hold: Opens sleep mode; quits training mode ...

  • Sigma RC 1209 - page 28

    232 www.sigmasport.com 7.4 FUNCTIONS DURING THE TRAINING The Running Computer measures many different training statistics, but it cannot display them all at once. You can view any function with just a press of a button. 7 TRAINING MODE 7.5 RADIO LINK WITH THE R3 TRANSMITTER The RC 1209 receives the heart rate, speed and distance from the R3 transmi ...

  • Sigma RC 1209 - page 29

    233 US/GB 7 TRAINING MODE Synchronization Start the training mode, reset the RC1209 to zero, your R3 transmitter will synchronize. During synchronization the word “ SYNC ” is displayed. The synchronization is complete, when “ SYNC ” is no longer seen in the display. Message “Too many signals” This message appears when there are too many ...

  • Sigma RC 1209 - page 30

    234 www.sigmasport.com Press START/STOP button. The stopwatch icon disappears. The stopwatch has stopped. Press START/STOP button again. The stopwatch icon is displayed again. The stopwatch continues to run. Press START/STOP button immediately. There by prevent the average values or the running time from being distorted. Press and hold the PULSE (- ...

  • Sigma RC 1209 - page 31

    235 US/GB 7 TRAINING MODE 7.9 TRAINING VALUES AFTER THE TRAINING Prerequisite: You are in the training mode. After training, you can view the measured values in the training mode in peace. With th e SET, PULSE (-) and SPEED (+) buttons you can scroll between each values. In add ition to the current training values, the running computer also shows s ...

  • Sigma RC 1209 - page 32

    236 www.sigmasport.com 8 MAINTENANCE AND CLEANING 8.1 CHANGING THE BATTERY The battery CR2032 (Ref. No. 00342) is used in the running computer and battery CR2450 (Ref. No. 20316) in th e R3 transmitter. Prerequisite: You have a new battery and the battery compartment cover tool. 1 Turn the cover of the battery compartment with the tool counterclock ...

  • Sigma RC 1209 - page 33

    237 US/GB 8 MAINTENANCE AND CLEANING 8.2 WASHING THE COMFORTEX+ TEXTILE CHEST BELT The COMFORTEX + textile chest belt can be washed in the washing machine at +40°C/104°F hand wash. Standard detergents may be used, but please do not use bleaching agents or detergents with bleach additives. k Do not use soap or fabric softener. k Do not dry clean k ...

  • Sigma RC 1209 - page 34

    238 www.sigmasport.com LI = Lithium Ionen 8 MAINTENANCE AND CLEANING 8.4 DISPOSAL 9 TECHNICAL DATA Electronic devices must not be disposed of with household waste. Please give the device to a designated disposal agency. Batteries must not be disposed of with the house hold waste (Battery Law). Please give the batteries to a designated delivery stat ...

  • Sigma RC 1209 - page 35

    239 US/GB NOTES ...

  • Sigma RC 1209 - page 36

    www.sigmasport.com running COMPuTEr SIGMA Elektro GmbH Dr. - Julius - Leber - Straße 15 D - 67433 Neustadt /Weinstraße Tel. + 49 (0) 63 21- 9120 - 0 Fax. + 49 (0) 63 21- 9120 - 34 E - mail: info@sigmasport.com SIGMA SPORT ASIA Asia, Australia, South America, Africa 10F, No.192, Zhonggong 2 nd Rd., Xitun Dist., Taichung City 407, Taiwan Tel. +886- ...

Manufacturer Sigma Category Sport Watch

Documents that we receive from a manufacturer of a Sigma RC 1209 can be divided into several groups. They are, among others:
- Sigma technical drawings
- RC 1209 manuals
- Sigma product data sheets
- information booklets
- or energy labels Sigma RC 1209
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sigma RC 1209.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sigma RC 1209, service manual, brief instructions and user manuals Sigma RC 1209. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sigma RC 1209.

Similar manuals

A complete manual for the device Sigma RC 1209, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sigma RC 1209 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sigma RC 1209.

A complete Sigma manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sigma RC 1209 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sigma RC 1209, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sigma RC 1209, that we can find in the current document
3. Tips how to use the basic functions of the device Sigma RC 1209 - which should help us in our first steps of using Sigma RC 1209
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sigma RC 1209
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sigma RC 1209 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sigma RC 1209?

Use the form below

If you did not solve your problem by using a manual Sigma RC 1209, ask a question using the form below. If a user had a similar problem with Sigma RC 1209 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)