-
Kyocera KM-C2230 - page 1
Enlarge Display Mode User ’ s Guide Please read the User ’ s Guide before using the copier . Keep it close to the copier for easy reference. KM-C2230 ...
-
Kyocera KM-C2230 - page 2
Introductio n i Intr oduct ion This User’s Guide contains details on the operatio n of the vari ous functions avai lable in the Enlarge Dis- play mode and on the vari ous op erating precau- tions. In order t o en sure that this machine is used correctly a nd efficiently, carefully read this guide befor e using the mach ine. After readin g this gu ...
-
Kyocera KM-C2230 - page 3
Contents ii Contents The topics listed belo w are described in the Enlarge Display Mode Operations Guide. For detai ls on oth- er topics, refer to the User ’ s Guide. ✎ Additional Infor mation The descriptions in this guid e show sample screens with i nch measurements. The same setting in screens with metric mea- surements can be spe cified usi ...
-
Kyocera KM-C2230 - page 4
Con tents iii Pape r type icons ......... ......... ....... ........1 -15 Pape r supply icons ....... ....... .......... .....1- 17 To use the Volume Track mode ....... ..1-18 2 Paper Settings 2.1 Pa per Set tings ....... ....... .......... .......... ..2-2 To specify a non-standa rd (custom) paper size f or the 1s t drawe r .. ......... .....2-2 T ...
-
Kyocera KM-C2230 - page 5
Contents iv 4 Use ful Opera tions 4.1 Ba sic Copyi ng .......... ......... .......... ...... 4- 2 To ma ke copies ..... .......... ......... ....... .... 4-2 4.2 St opping Cop ying ...... .......... ......... .... 4-6 To st op a copy job ... .......... ....... .......... . 4-6 To res tart the copy jo b ..... ......... ....... .... 4-7 4.3 Queuing a ...
-
Kyocera KM-C2230 - page 6
Con tents v To specify different vertical and horizontal scaling proporti ons (X/Y Zoom se ttings) .... ......... .......... .....5- 21 5.4 Se lecting a P aper Set ting .... ......... ...5-23 To se lect t he Pa per settin g.. ....... ........5 -24 5.5 Se lecting Orig inal Setti ng.... ....... .....5-26 To se lect an Original settin g ... ....... .. ...
-
Kyocera KM-C2230 - page 7
Contents vi 6.2 Setting the “ Enlarge-Display Notice ” Funct ion ........ ......... .......... .......... ........ 6- 5 To specify whether the confirmati on message for cance ling the Enlarge Display mode appears ........... 6-6 Operations f or t he confirmation message for cance ling the Enla rge Display mo de ....... .......... ........ 6 -8 ...
-
Kyocera KM-C2230 - page 8
Before M aking Copies Chapter 1 1 1 Before Making Copies This chapter provides information that is important to know before mak- ing copies. ...
-
Kyocera KM-C2230 - page 9
1 1.1 E xplanat ion o f Guide C onvent ions 1-2 Before M aking Copies Chapter 1 1.1 Explanatio n of Guide Conven- tions CAUTION Failure to observe instructions highlighted in this mann er may result in ser ious injurie s or property damage. ➜ Observe all ca utions in order to ensure safe use of this machine. ✎ Reminder! Text highlig hted in thi ...
-
Kyocera KM-C2230 - page 10
1.1 Explan ation of Gui de Convent ions 1 1-3 Before M aking Copies Chapter 1 [ ] This indicates a key ei ther on the touch panel or on the contro l panel. ...
-
Kyocera KM-C2230 - page 11
1 1.2 Cont rol Panel Parts and Their Func tions 1-4 Before M aking Copies Chapter 1 1.2 Control Panel Parts and Their Functions } Reference For details, refer to “ Control Panel ” on page 2-12 of the User ’ s Guide. 12 11 10 9 1 2 3 4 8 7 6 5 No. Part Name Description 1 Touch panel Displays va rious screens and messages. Specify the various s ...
-
Kyocera KM-C2230 - page 12
1.2 Contro l Panel Parts a nd Their Func tions 1 1-5 Before M aking Copies Chapter 1 3 [Access] key If Volume Track mode has been se t, press this key after entering t he account number and a ccess code in order to use th is machine. 4 [Inter rupt] key Press to enter I nterrupt mode. While the mach ine is in In terrupt mode, t he indicato r on the ...
-
Kyocera KM-C2230 - page 13
1 1.2 Cont rol Panel Parts and Their Func tions 1-6 Before M aking Copies Chapter 1 12 11 10 9 1 2 3 4 8 7 6 5 No. Part Name Description 8 [S tart] key Press to s tart copyin g. When this machine is ready to begin copying , the indicator on the [Start] key lights up in green. If the indicator on the [Start] key lights up in orange, copying cannot b ...
-
Kyocera KM-C2230 - page 14
1.2 Contro l Panel Parts a nd Their Func tions 1 1-7 Before M aking Copies Chapter 1 12 [Mode Check] key Press to di splay screens showing the specified settings. No. Par t Name Description ...
-
Kyocera KM-C2230 - page 15
1 1.3 Adjus ting the Angle of the Control Pa nel 1-8 Before M aking Copies Chapter 1 1.3 Adjusting the Angle of the Con- trol Panel } Reference For details, refer to “ Adjusting the Angle of the Control Panel ” o n page 2-23 of the User ’ s Guide. The contro l panel can be adjusted to any of three angles. Adjust the control panel to the angle ...
-
Kyocera KM-C2230 - page 16
1.3 Adjusti ng the Angle o f the Control Pan el 1 1-9 Before M aking Copies Chapter 1 To lower the ang le of the control panel ➜ Pull the control panel rele ase lever toward you, and then push down on the control panel. To raise the ang le of the control panel ➜ Pull the control panel rele ase lever toward you, and then pull up on the control p ...
-
Kyocera KM-C2230 - page 17
1 1.4 Touc h Panel 1-10 Before M aking Copies Chapter 1 1.4 Touch Panel Displaying the en larged Basic screen } Reference For deta ils, refer to “ Touch Panel ” on page 2-1 4 of the User ’ s Guide. When this machine is turned on (the power switch is set to “ I ” ), the st andard-sized Basic screen ap- pears in the touch panel. ➜ Press t ...
-
Kyocera KM-C2230 - page 18
1.4 Touch Panel 1 1-11 Before M aking Copies Chapter 1 The enlarged Basic screen appears in the touch panel. ✎ Additional I nformation Press the [Enlar ge Display] key in t he control panel to return th e Basic screen to it s standard size. ...
-
Kyocera KM-C2230 - page 19
1 1.4 Touc h Panel 1-12 Before M aking Copies Chapter 1 Touc h panel op erat ion To acti vate a fu nction or to s elect a s etting, lightly touch the desired function or setting shown on the touch panel. CAUTION Do not apply ex treme pressure to the touch panel, otherwise it may be scratched or dam- aged. ➜ Never push down on the t ouch panel wit ...
-
Kyocera KM-C2230 - page 20
1.4 Touch Panel 1 1-13 Before M aking Copies Chapter 1 Keys displayed in the touch panel Touch this key to display the Basic scre en. This key ap pears when there are jo bs queued to be print ed. Touch this key to display the Jo b List screen. For details on jobs, refer to chapter 7 “ Managing Jobs ” . This key ap pears when there is a mes- sag ...
-
Kyocera KM-C2230 - page 21
1 1.4 Touc h Panel 1-14 Before M aking Copies Chapter 1 This key appears if an e rror occurs dur- ing image stabilizing , or during pr int or scan operations. Touch this key to disp lay the status of the machine. Inform the service repre- sentative of the number that is dis- playe d. ...
-
Kyocera KM-C2230 - page 22
1.4 Touch Panel 1 1-15 Before M aking Copies Chapter 1 Paper type icons If paper other than plai n paper is specified for the 1st drawer and the multiple bypass tray, t he icon in- dicati ng the paper type appears in the Paper/S ize screen. ...
-
Kyocera KM-C2230 - page 23
1 1.4 Touc h Panel 1-16 Before M aking Copies Chapter 1 Paper type ico ns that appear Overhead projector transparencies Envelopes Thick paper 1 Thick paper 2 Thick paper 3 Second si de o f a double-sided copy on plain paper Second side of a double- sided copy on th ick paper 1 Second side of a double-sided copy on thick paper 2 Second side of a dou ...
-
Kyocera KM-C2230 - page 24
1.4 Touch Panel 1 1-17 Before M aking Copies Chapter 1 Paper supply icon s The amount of paper that remains is indicated in the screen where the pap er size is selected. For de tails about the scree n for selecti ng the paper size, refe r to “ Selecting a Paper Setting ” on page 5-23 . Paper supply icons th at appear. The paper supply is low. T ...
-
Kyocera KM-C2230 - page 25
1 1.4 Touc h Panel 1-18 Before M aking Copies Chapter 1 To use the Volume Track mode If th e “ Volume Track Mode ” functio n is set to “ Yes ” , this machine can only be used by users who enter their vol ume nu m b er a nd a ccess number. When the screen shown bel ow app ears, type in the volume number and access number. For details on volu ...
-
Kyocera KM-C2230 - page 26
1.4 Touch Panel 1 1-19 Before M aking Copies Chapter 1 3 Using the keypad, type in the access num- ber. 4 Press th e [Access] key in t he control p anel. The Basic screen app ears. 5 When you are finished making copies, press the [A ccess] key. The volume number a nd access number in- put screen appears again . ...
-
Kyocera KM-C2230 - page 27
1 1.4 Touc h Panel 1-20 Before M aking Copies Chapter 1 ...
-
Kyocera KM-C2230 - page 28
Paper Setti ngs Chapter 2 2 2 Paper Settings This chapter p rovides procedures for specifying the paper sett ings. ...
-
Kyocera KM-C2230 - page 29
2 2.1 P aper S etting s 2-2 Paper Setti ngs Chapter 2 2.1 Paper Settings } Reference For details, refer to “ Selecting a Paper/Size S et- ting ” on page 3-18 of the User ’ s Guide. To specify a non-standard (cu stom) paper size for the 1st d rawer If non-standard -sized paper is load ed into the 1st drawer, sp ecify the size of paper that is ...
-
Kyocera KM-C2230 - page 30
2.1 Paper Settings 2 2-3 Paper Setti ngs Chapter 2 3 Touch [Custom Size]. ❍ To speci fy a paper size in inch measu re- ments, continue wi th step 4. ❍ To speci fy a paper size in metr ic mea- surements, skip to step 6. 4 Touch and to select the length of side X for the paper that is loaded (bet ween 5-1/2 an d 18 inches). (As an example, the fo ...
-
Kyocera KM-C2230 - page 31
2 2.1 P aper S etting s 2-4 Paper Setti ngs Chapter 2 5 Touch , , and to select the length of sid e Y for t he paper that is loaded (between 3-9/1 6 and 12-1/4 inches). (As an example, the following screen sho ws a specified setti ng of 11-3/4 inches.) ❍ Touch until the cursor moves below the value t hat you wish to change. After specif ying the ...
-
Kyocera KM-C2230 - page 32
2.1 Paper Settings 2 2-5 Paper Setti ngs Chapter 2 6 Using the keypad, type in the lengt h of sid e X for t he paper that i s loaded (between 140 and 457 mm). (As an example, t he following screen shows a specifie d setting of 140 mm.) 7 Touch , and then use the keypad to type in the length of side Y for the paper th at is loaded (bet ween 90 and 3 ...
-
Kyocera KM-C2230 - page 33
2 2.1 P aper S etting s 2-6 Paper Setti ngs Chapter 2 ✎ Additional Info rmation If custom paper sizes have been stored, in- stead of perf orming steps 6 and 7, a st ored pa- per size sett ing can be selected by pressing or . For details on st oring custom paper sizes, refe r to “ To store a non-st andard (custom) paper size for the 1st drawer ? ...
-
Kyocera KM-C2230 - page 34
2.1 Paper Settings 2 2-7 Paper Setti ngs Chapter 2 To store a non -standard (c ustom) paper size for the 1st drawer 1 Touch [Paper/ Size] in the Basic screen. 2 Touch the key for the 1st drawer, and then touch [Change Size]. 3 Touch [Size Registrati on]. ❍ To speci fy a paper size in inch measu re- ments, continue wi th step 4. ❍ To speci fy a ...
-
Kyocera KM-C2230 - page 35
2 2.1 P aper S etting s 2-8 Paper Setti ngs Chapter 2 4 Touch and to select the lengt h of side X for the paper that is loaded (be tween 5-1/2 and 18 inches). (As an example, the following screen sho w s a specified setting of 7-3/4 inches.) ❍ Touch until the cursor moves below the value t hat you wish to change. 5 Touch , , and to select the len ...
-
Kyocera KM-C2230 - page 36
2.1 Paper Settings 2 2-9 Paper Setti ngs Chapter 2 6 Using the keypad, type in the lengt h of sid e X for t he paper that i s loaded (between 140 and 457 mm). (As an example, t he following screen shows a specifie d setting of 200 mm.) 7 Touch , and then use the keypad to type in the length of side Y for the paper th at is loaded (bet ween 90 and 3 ...
-
Kyocera KM-C2230 - page 37
2 2.1 P aper S etting s 2-10 Paper Setti ngs Chapter 2 9 Touch [Enter]. A non-standard (custom) paper si ze is stored for the 1st drawer. ...
-
Kyocera KM-C2230 - page 38
2.1 Paper Settings 2 2-11 Paper Setti ngs Chapter 2 To specify a paper size setti ng for the 1st drawer The size of the paper loaded int o the 1st drawer is automatically d etected, a nd the appropriat e paper size setting is select ed. However, it may be neces- sary to set the paper size if the paper size is not au- tomatica lly detected for some ...
-
Kyocera KM-C2230 - page 39
2 2.1 P aper S etting s 2-12 Paper Setti ngs Chapter 2 3 Touch eithe r [Inch] or [Met ric], depending on the size of paper that is loaded. 4 Select the sett ing for the size of paper tha t is loaded, and then to uch [Enter]. (As an example, the following scr een shows the setti ng for Letter selected. ) 5 Touch [Enter]. The paper size set ting for ...
-
Kyocera KM-C2230 - page 40
2.1 Paper Settings 2 2-13 Paper Setti ngs Chapter 2 To specify a non-standard (custom ) paper size for the multiple b ypass tray If non-standar d-sized paper is to be loaded into the multiple bypass t ray, specify the size of paper that is to be loaded. 1 Touch [Paper/ Size] in the Basic screen. 2 Touch [Bypass] . ...
-
Kyocera KM-C2230 - page 41
2 2.1 P aper S etting s 2-14 Paper Setti ngs Chapter 2 3 Touch [Custom Size] . ❍ To specify a paper size in in ch measure- ments, cont inue with st ep 4. ❍ To specify a paper size in metric me a- surements, skip to step 6. 4 Touch and to select the lengt h of side X for the paper that is to be loaded (be- tween 5-1/2 and 18 in ches). (As an exa ...
-
Kyocera KM-C2230 - page 42
2.1 Paper Settings 2 2-15 Paper Setti ngs Chapter 2 5 Touch , , and to select the length of sid e Y f or the paper that is to be loaded (between 3-9/16 and 12-1/4 inches). (As an example, the followin g screen shows a specified setting of 11-3 /4 inches.) ❍ Touch until the cursor moves below the value tha t you wish to change. After sp ecifying t ...
-
Kyocera KM-C2230 - page 43
2 2.1 P aper S etting s 2-16 Paper Setti ngs Chapter 2 6 Using the keypad, type i n the length of side X for the paper that is to be loaded (between 140 and 457 mm). (As an example, the fo l- lowing screen sh ows a specified setting of 140 mm.) 7 Touch , and then use the keypad to type in the len gth of sid e Y for the paper that is to be loaded (b ...
-
Kyocera KM-C2230 - page 44
2.1 Paper Settings 2 2-17 Paper Setti ngs Chapter 2 ✎ Addi tiona l Inform ation If custom paper sizes have been stor ed, in- stead of perfo rming steps 6 and 7, a stor ed pa- per size setting can be select ed by pressing or . For detai ls on storing custom paper sizes, refer to “ T o store a non-stand ard (custom) paper size for the multiple by ...
-
Kyocera KM-C2230 - page 45
2 2.1 P aper S etting s 2-18 Paper Setti ngs Chapter 2 To store a non-stan dard (custom) paper size for the mu ltiple bypass tray Two non-standard paper sizes can be stored. 1 Touch [Paper/Size] in the Basic scree n. 2 Touch [Bypass]. 3 Touch [Size Registr ation]. ❍ To specify a paper size in in ch measure- ments, cont inue with st ep 4. ❍ To s ...
-
Kyocera KM-C2230 - page 46
2.1 Paper Settings 2 2-19 Paper Setti ngs Chapter 2 4 Touch and to select the length of side X for the paper that is loaded (bet ween 5-1/2 an d 18 inches). (As an example, the following screen shows a specified setting of 7-3/4 inch es.) ❍ Touch until the cursor moves below the value tha t you wish to change. 5 Touch , , and to select the length ...
-
Kyocera KM-C2230 - page 47
2 2.1 P aper S etting s 2-20 Paper Setti ngs Chapter 2 6 Using the keypad, type i n the length of side X for the paper that is to be loaded (between 140 and 457 mm). (As an example, the fo l- lowing screen sh ows a specified setting of 200 mm.) 7 Touch , and then use the keypad to type in the len gth of sid e Y for the paper that is to be loaded (b ...
-
Kyocera KM-C2230 - page 48
2.1 Paper Settings 2 2-21 Paper Setti ngs Chapter 2 9 Touch [Enter ]. A non-stand ard (custom) paper size is stored for the multiple bypass tr ay. ...
-
Kyocera KM-C2230 - page 49
2 2.1 P aper S etting s 2-22 Paper Setti ngs Chapter 2 To specify a paper size settin g for the multiple bypass tray The size of the paper loaded into t he multiple by- pass tray is automatical ly detected, and the appro- priate paper size sett ing is selected. However, it may be necessary to set the pap er size if t he paper size is not automatica ...
-
Kyocera KM-C2230 - page 50
2.1 Paper Settings 2 2-23 Paper Setti ngs Chapter 2 3 Touch either [Inch] or [Met ric], depending on the size of paper th at is t o be loaded. 4 Select th e setting for the size of paper that is to be loaded, and th en touch [Enter]. (As an example, the followin g screen shows the setting fo r Letter selected. ) The paper size for the multiple byp ...
-
Kyocera KM-C2230 - page 51
2 2.1 P aper S etting s 2-24 Paper Setti ngs Chapter 2 To specify the paper type for the multiple bypass tray Select the appr opriate setting for the type of the pa- per loaded into the multip le bypass tray. 1 Touch [Paper/Size] in the Basic scree n. 2 Touch [Bypass]. 3 Touch [Paper Type]. ...
-
Kyocera KM-C2230 - page 52
2.1 Paper Settings 2 2-25 Paper Setti ngs Chapter 2 4 Touch the key for the type of paper loaded into the multiple bypass tray, and then t ouch [Enter]. The paper type for the mu ltiple bypass tray is set. ...
-
Kyocera KM-C2230 - page 53
2 2.1 P aper S etting s 2-26 Paper Setti ngs Chapter 2 ...
-
Kyocera KM-C2230 - page 54
Original Doc uments Chap ter 3 3 3 Original Documents This chapter provi des information on loading o riginal documents. ...
-
Kyocera KM-C2230 - page 55
3 3.1 Load ing the Doc ument 3-2 Original Doc uments Chap ter 3 3.1 L oading the D ocument } Reference For details, refer to “ Feeding the Document ” on page 2-41 of the User ’ s Guide. Loading the D ocument Into the Reverse Automati c Document Feeder The following procedur e describes how a document is loaded into the reverse automatic docum ...
-
Kyocera KM-C2230 - page 56
3.1 Loadin g the Docu ment 3 3-3 Original Doc uments Chap ter 3 ❍ When loading documents of mixed pag e sizes, align the top edge and left side of the documents, and then touch [Mixed Original]. 2 If necessary, select an Original se tting. For details on the Original sett ing, refer to “ Selecting Original Setting ” on pag e 5-26 . 3 If neces ...
-
Kyocera KM-C2230 - page 57
3 3.1 Load ing the Doc ument 3-4 Original Doc uments Chap ter 3 4 Press the [Start] key in the control panel. The pages of the document are fed in, start- ing with the topmost page. The scanned pages ar e fed out into the document output tray. ...
-
Kyocera KM-C2230 - page 58
3.1 Loadin g the Docu ment 3 3-5 Original Doc uments Chap ter 3 Placing the Docu ment On the Original Glass The foll owing procedure describes how a document is placed on the original glass. 1 Lift open origin al cover PLATEN COVER TYPE E (he reafter referr ed to as “ origina l cover ” ), or the dupl exing document feeder if it is installed. ? ...
-
Kyocera KM-C2230 - page 59
3 3.1 Load ing the Doc ument 3-6 Original Doc uments Chap ter 3 2 Observe the f ollowing precauti ons when loading the document ont o the origi nal glass. ❍ Position the docume nt with the side to be copied facing d ow n . ❍ Position the document on the original glass with the top edge of the document (the top of the image) toward the re ar o f ...
-
Kyocera KM-C2230 - page 60
3.1 Loadin g the Docu ment 3 3-7 Original Doc uments Chap ter 3 3 If necessary, select an Original se tting. For details on the Original sett ing, refer to “ Selecting Original Setting ” on pag e 5-26 . ✎ Reminder! With placing the document on the original glas s, be sur e to sel ect the “ 1 ” Original setting. With placing the document o ...
-
Kyocera KM-C2230 - page 61
3 3.1 Load ing the Doc ument 3-8 Original Doc uments Chap ter 3 5 Press the [Start] key in the control panel. Scanning of the document begins. 6 Lift open th e original cover, or t he duplexing document feeder if it is inst alled, and then remove the document. 7 Close the original cover , or the duplexing document feed er if it is i nstalled. ...
-
Kyocera KM-C2230 - page 62
3.1 Loadin g the Docu ment 3 3-9 Original Doc uments Chap ter 3 ✎ Additional I nformation When using a Copy setting where mul tiple docu- ment pages are to be scanned, such as with “ 1- 2in1 ” or “ 2-2in1 ” , the screen shown below ap- pears afte r each pa ge is scanned. To continue scanning the document pages, remove the page that was sc ...
-
Kyocera KM-C2230 - page 63
3 3.1 Load ing the Doc ument 3-10 Original Doc uments Chap ter 3 ...
-
Kyocera KM-C2230 - page 64
Useful Ope rations Ch apter 4 4 4 Useful Operations This chapter provi des information on basic copy operations. ...
-
Kyocera KM-C2230 - page 65
4 4.1 Ba sic Copy ing 4-2 Useful Ope rations Ch apter 4 4.1 Basic Copying } Reference For details, refer to “ Making B asic Copies ” on page xiv of the User ’ s Guide. To make cop ies 1 Load the document to be cop ied. For details, refer to “ Load ing the Document ” on page 3-2 . ...
-
Kyocera KM-C2230 - page 66
4.1 Basic Copyin g 4 4-3 Useful Ope rations Ch apter 4 2 Specify the necessary copy settings. ❍ To speci fy a Color setting , touch [ Color]. For details, refer to “ Selecting a Color Setting ” on page 5-2 . ❍ To sp ecify a Outpu t setting, touch [Out- put]. For det ails, refer to “ Selecting Output Settings ” on page 5-4 . ❍ To speci ...
-
Kyocera KM-C2230 - page 67
4 4.1 Ba sic Copy ing 4-4 Useful Ope rations Ch apter 4 ❍ To specify the Original and Copy settings, touch [Orig Ö Copy]. For details, refer to “ Selecting Original Setting ” on page 5-26 and “ Select ing Copy Settings ” on page 5-30 . ❍ To specify Photo/Density sett ings, touch [Photo/Densit y]. For details, ref er to “ Se- lecting ...
-
Kyocera KM-C2230 - page 68
4.1 Basic Copyin g 4 4-5 Useful Ope rations Ch apter 4 4 Press the [St art] key in the control panel. ...
-
Kyocera KM-C2230 - page 69
4 4.2 Stoppi ng Copying 4-6 Useful Ope rations Ch apter 4 4.2 Stopping Co pying To stop a copy job ➜ During a copy operati on, press the [Stop ] key in the control panel. ...
-
Kyocera KM-C2230 - page 70
4.2 Stopping Copyi ng 4 4-7 Useful Ope rations Ch apter 4 The copy operat ion stops, an d the message “ Job has been st opped. To resume job press the St art Key. ” appears. ✎ Additional I nformation The stopped job can be de leted. For details, ref er to “ Over view of Jobs ” on page 7-2 and “ To delete a job that is being printed ” ...
-
Kyocera KM-C2230 - page 71
4 4.3 Qu euing a Copy Job for the Mu ltiple Bypas s Tray 4-8 Useful Ope rations Ch apter 4 4.3 Queuing a Copy Job for the Mul- tiple Bypass Tray If the “ Aut o Paper Select ” setting is specified and no tray or drawer is set to t he desired paper size o r type, se lect the “ Bypa ss Reser vation ” setting to scan the document and begin prin ...
-
Kyocera KM-C2230 - page 72
4.3 Queui ng a Copy Job for the Mu ltiple Bypas s Tray 4 4-9 Useful Ope rations Ch apter 4 2 Touch [Bypass Re servation]. 3 Touch [Paper Type]. 4 Select the d esired paper type, and th en touch [Enter]. ...
-
Kyocera KM-C2230 - page 73
4 4.3 Qu euing a Copy Job for the Mu ltiple Bypas s Tray 4-10 Useful Ope rations Ch apter 4 5 Select t he desired paper size, and then touch [Enter] . The message “ Job has been stopped. To resume job press the Start Key. ” appears. 6 Press the [Start] key in the control panel. Scanning o f the documen t continues. ...
-
Kyocera KM-C2230 - page 74
4.3 Queui ng a Copy Job for the Mu ltiple Bypas s Tray 4 4-11 Useful Ope rations Ch apter 4 7 After the message “ Place paper in the By- pas s Tray . ” appears, replace the paper loaded into t he multiple bypass tray wit h pa- per of the size and type specified in t he screen. The copies are printed. 8 After the copy job using th e “ Byp ass ...
-
Kyocera KM-C2230 - page 75
4 4.4 Interru pting a Cop y Job 4-12 Useful Ope rations Ch apter 4 4.4 Interrupting a Copy Job } Reference For details, refer to “ Interrupting a Copy Job (In- terrupt Mode) ” on page 6- 8 of the User ’ s Guide. The current copy job can be temporarily paused so that a quick copy of a different document can be made. For detail s on jobs, refer ...
-
Kyocera KM-C2230 - page 76
4.4 Interrup ting a Copy Job 4 4-13 Useful Ope rations Ch apter 4 2 Press the [Int errupt] ke y in the control panel. The indicator on the [Interrupt] key light s up, and the message “ Now in Interr upt mode. ” appears. 3 Load the document to be copied, and then specify the necessary co py settings. ...
-
Kyocera KM-C2230 - page 77
4 4.4 Interru pting a Cop y Job 4-14 Useful Ope rations Ch apter 4 4 Press the [Start] key in the control panel. After the document is scann ed, the job cur- rently being printed is pause d, and the job that printing was inte rrupted for is printed. 5 After the i nterrupting copy job is fi nished, re- move the printed pages f rom t he copy out- put ...
-
Kyocera KM-C2230 - page 78
4.4 Interrup ting a Copy Job 4 4-15 Useful Ope rations Ch apter 4 ✎ Additional I nformation If the [In terrupt] key is not pressed after the inter- rupting copy job is finished, the indicat or on the [Interr upt] key goes off and the int errupted copy job automat ically continues prin ting after t he length of time sp ecified for the “ Panel Re ...
-
Kyocera KM-C2230 - page 79
4 4.4 Interru pting a Cop y Job 4-16 Useful Ope rations Ch apter 4 ...
-
Kyocera KM-C2230 - page 80
Specif ying Co py Setti ngs Chapter 5 5 5 Specifying Copy Settings This chapter describes t he proce- dures for specifying the various copy settings. ...
-
Kyocera KM-C2230 - page 81
5 5.1 Selec ting a Color Sett ing 5-2 Specif ying Co py Setti ngs Chapter 5 5.1 Sel ecting a Color Setti ng } Reference For details, re fer to “ Selecting a C o lor Setting ” on page 3-5 of th e User ’ s Guide. Four Color sett ings are available for making copi es: “ Auto Color ” , “ Full Color ” , “ Bla ck ” and “ 2 Color ” . ...
-
Kyocera KM-C2230 - page 82
5.1 Selecti ng a Color Setting 5 5-3 Specif ying Co py Setti ngs Chapter 5 2 Select the desi red Color setting. The selected Colo r setting is appli ed. ✎ Addi tiona l Inform ation To produce two-col or cop ies, touch [2 Color], touch the key for the color th at will be used for reproducing the color areas, and t hen touch [Enter]. ...
-
Kyocera KM-C2230 - page 83
5 5.2 Selec ting Output Settin gs 5-4 Specif ying Co py Setti ngs Chapter 5 5.2 Selecting Output Settings } Reference For details, refer to “ Selecting Output Settings ” on page 3- 8 of the User ’ s Guide. Various settings are ava ilable for sorting and finish- ing copies when they are fed into the copy output tray. The following three sort i ...
-
Kyocera KM-C2230 - page 84
5.2 Selecti ng Outpu t Settings 5 5-5 Specif ying Co py Setti ngs Chapter 5 To specify Output settings 1 Touch [Basic], t hen [Output]. 2 Select the desi red Output settings. The selected Output sett ing is ap plied. ...
-
Kyocera KM-C2230 - page 85
5 5.2 Selec ting Output Settin gs 5-6 Specif ying Co py Setti ngs Chapter 5 ✎ Additional Infor mation To change the position of the punched holes or stapl es with the “ 2 Staples ” sett ing, touch [Hole Punch] or [2 Staples] in st ep 2, touch [Change Position] and select the desired position in the screen that appear ed, and then touch [Ent e ...
-
Kyocera KM-C2230 - page 86
5.3 Specify ing a Zoom Setti ng 5 5-7 Specif ying Co py Setti ngs Chapter 5 5.3 Specifying a Zoom Setting } Reference Fo r details, r efer to “ Specifying a Zoom Setting ” on page 3-13 of the User ’ s Gui de. The zoom rat io can be set in order t o make a copy on paper with a size different than the document or to enlarg e or reduce the size ...
-
Kyocera KM-C2230 - page 87
5 5.3 Speci fying a Zoom Setting 5-8 Specif ying Co py Setti ngs Chapter 5 To specify a Zoo m setting 1 Touch [Basic], the n [Zoom]. 2 Select t he desired Zoom se tting. ...
-
Kyocera KM-C2230 - page 88
5.3 Specify ing a Zoom Setti ng 5 5-9 Specif ying Co py Setti ngs Chapter 5 ✎ Additional I nformation If [ × 1.0] was selected in step 2, copies of the same size as the document will be pri nted. If [Minimal] was selected in step 2, a slight ly re- duced copy of the original will be printed. (The defaul t zoom ratio is 0.930.) The zoo m ra tio o ...
-
Kyocera KM-C2230 - page 89
5 5.3 Speci fying a Zoom Setting 5-10 Specif ying Co py Setti ngs Chapter 5 To specify a zoom ratio 1 Touch [Basic], the n [Zoom]. 2 Touch and to specify t he desired zoom ratio (between 0.250 and 4.000). ❍ The repeat f eature for a key starts when a key in the touch panel is held down. For details, refer to “ Setting the “ Key Repeat Star t/ ...
-
Kyocera KM-C2230 - page 90
5.3 Specify ing a Zoom Setti ng 5 5-11 Specif ying Co py Setti ngs Chapter 5 To select the “ Auto Zoo m ” setting 1 Touch [Basic], then [Zoom] . 2 Touch [Auto Zoom]. ...
-
Kyocera KM-C2230 - page 91
5 5.3 Speci fying a Zoom Setting 5-12 Specif ying Co py Setti ngs Chapter 5 3 Select t he paper drawer loaded with paper of the desired copy size. The “ Auto Zoo m ” setting is applied. ✎ Additional Infor mation When scanning of the document begi ns, the doc- ument size is de tected, and copi es are print ed at the appropriat e zoom ratio for ...
-
Kyocera KM-C2230 - page 92
5.3 Specify ing a Zoom Setti ng 5 5-13 Specif ying Co py Setti ngs Chapter 5 To specify a Reduce or Enlarge setting 1 Touch [Basic], then [Zoom] . 2 Touch [Reduce] or [E nlarge]. ...
-
Kyocera KM-C2230 - page 93
5 5.3 Speci fying a Zoom Setting 5-14 Specif ying Co py Setti ngs Chapter 5 3 Select the desired zoom rat io, and then touch [Enter] (As an example, the following scr een shows the setti ng [Legal Ö Letter] selected on t he Reduce screen.). The specified red uction or enlargement zoom ratio is applied. ...
-
Kyocera KM-C2230 - page 94
5.3 Specify ing a Zoom Setti ng 5 5-15 Specif ying Co py Setti ngs Chapter 5 To specify a manua l zoom ratio 1 Touch [Basic], then [Zoom] . 2 Touch [Manual Zoom]. ...
-
Kyocera KM-C2230 - page 95
5 5.3 Speci fying a Zoom Setting 5-16 Specif ying Co py Setti ngs Chapter 5 3 Press the [C] (clear) ke y, and then use the keypad to type in the desired zoom ratio (be- tween 0.250 and 4.000). (As an example, the following scr een shows a speci fied setting of 3.000.) 4 Touch [Enter]. The specified zoom rati o is applie d. ...
-
Kyocera KM-C2230 - page 96
5.3 Specify ing a Zoom Setti ng 5 5-17 Specif ying Co py Setti ngs Chapter 5 To store a man ual zoom ratio 1 Touch [Basic], then [Zoom] . 2 Touch [Manual Zoom], and then touch [Zoom Inpu t]. ...
-
Kyocera KM-C2230 - page 97
5 5.3 Speci fying a Zoom Setting 5-18 Specif ying Co py Setti ngs Chapter 5 3 Press the [C] (clear) ke y, and then use the keypad to type in the desired zoom ratio (be- tween 0.250 and 4.000). (As an example, the following scr een shows a sp ecified of 2 .500.) ❍ When storing a Minimal zoom rati o, spec- ify a zoo m ratio between 0.900 and 0.999. ...
-
Kyocera KM-C2230 - page 98
5.3 Specify ing a Zoom Setti ng 5 5-19 Specif ying Co py Setti ngs Chapter 5 To recall a stor ed manual zoom ratio 1 Touch [Basic], then [Zoom] . 2 Touch [Manual Zoom]. 3 Touch , or [Minimal]. (As an example, the followin g screen shows stored settings of 0. 250 and 0.333.) ...
-
Kyocera KM-C2230 - page 99
5 5.3 Speci fying a Zoom Setting 5-20 Specif ying Co py Setti ngs Chapter 5 4 Touch [Enter]. The stored zoom ratio is recalled . ...
-
Kyocera KM-C2230 - page 100
5.3 Specify ing a Zoom Setti ng 5 5-21 Specif ying Co py Setti ngs Chapter 5 To specify different vertic al and horizon- tal scaling proportions (X/Y Zoom se t- tings) 1 Touch [Basic], then [Zoom] . 2 Touch [Manual Zoom]. 3 Touch [X/Y Zoom]. ...
-
Kyocera KM-C2230 - page 101
5 5.3 Speci fying a Zoom Setting 5-22 Specif ying Co py Setti ngs Chapter 5 4 Using the keypad, type in t he desired length of side X (between 0.250 and 4.0 00). 5 Touch , and then use the keypad to type in the desired l ength of sid e Y (between 0.250 and 4.000). 6 Touch [Enter]. The specified zoom rati o is applie d. ...
-
Kyocera KM-C2230 - page 102
5.4 Selecti ng a Paper Setti ng 5 5-23 Specif ying Co py Setti ngs Chapter 5 5.4 Selecting a Paper Setting } Reference Fo r deta ils, re fer to “ Selecting a Paper/Size Set- ting ” on pa ge 3-18 of the User ’ s Guid e. The paper drawer specif ied with paper of the de- sired size can be selected. ...
-
Kyocera KM-C2230 - page 103
5 5.4 Selec ting a Paper Sett ing 5-24 Specif ying Co py Setti ngs Chapter 5 To select the Paper setting 1 Touch [Basic], the n [Paper/Size]. ...
-
Kyocera KM-C2230 - page 104
5.4 Selecti ng a Paper Setti ng 5 5-25 Specif ying Co py Setti ngs Chapter 5 2 Select the paper drawer specifi ed with pa- per of the desired size. The selected Paper setting is applied. ✎ Additional I nformation If [A uto Paper Select] is selected, t he paper draw- er specified with paper of the app ropriate size is automatically select ed accor ...
-
Kyocera KM-C2230 - page 105
5 5.5 Selecti ng Origi nal Setting 5-26 Specif ying Co py Setti ngs Chapter 5 5.5 Selecting Origi nal Setting } Reference For details, refer to “ Selecting Original Settings ” on page 3- 27 of th e User ’ s Gu ide. A setting correspond ing to the type of origin al being copied can be selected. The following thre e Origina l settings can be sp ...
-
Kyocera KM-C2230 - page 106
5.5 Selecti ng Origi nal Setting 5 5-27 Specif ying Co py Setti ngs Chapter 5 To select an Origina l setting 1 Touch [Orig Ö Copy], and then touch [O rigi- nal] . 2 Touch [1] or [2], de pending on the loaded docume nt, and then touch [Original Direc- tion]. ...
-
Kyocera KM-C2230 - page 107
5 5.5 Selecti ng Origi nal Setting 5-28 Specif ying Co py Setti ngs Chapter 5 3 Touch the key for the appropria te document orientation, and then touch [Enter]. ❍ If the orientation of the document is differ- ent from that of t he selected Original Di- rection setti ng, 2in1 copies will not be printed correctly. 4 Touch [Margin]. 5 Touch the key ...
-
Kyocera KM-C2230 - page 108
5.5 Selecti ng Origi nal Setting 5 5-29 Specif ying Co py Setti ngs Chapter 5 6 Touch [Enter ]. The selected Original settings are app lied. ...
-
Kyocera KM-C2230 - page 109
5 5.6 S electi ng Copy Setting s 5-30 Specif ying Co py Setti ngs Chapter 5 5.6 Selecting Copy Settings } Reference For details, refer to “ Select ing Copy Sett ings ” on page 3-37 of the User ’ s Guide. The desired type of copy can be specified. The following two Copy settings can be specified. G Single-side/Double-side d/Single-sided 2i n1/ ...
-
Kyocera KM-C2230 - page 110
5.6 Selecti ng Copy Settin gs 5 5-31 Specif ying Co py Setti ngs Chapter 5 To select a Cop y setting 1 Touch [Orig Ö Copy], a nd then touch [Copy] . 2 Select the de sired Copy setting. ...
-
Kyocera KM-C2230 - page 111
5 5.6 S electi ng Copy Setting s 5-32 Specif ying Co py Setti ngs Chapter 5 ✎ Additional Info rmation To specify the position of the bind ing margin, touch [Binding Direct ion] in step 2, and then se- lect the desir ed setting. 3 Touch [Enter]. The selected Copy setti ng is applied. ...
-
Kyocera KM-C2230 - page 112
5.7 Selecti ng a Photo/D ensity Setting 5 5-33 Specif ying Co py Setti ngs Chapter 5 5.7 Selecting a Photo/D ensity Set- ting } Reference Fo r deta ils, re fer to “ Selecting Photo/Densi ty Settings ” on page 3-45 of th e User ’ s Guide. The image quality of the origina l can be specified. The following five Photo/Density sett ings are availa ...
-
Kyocera KM-C2230 - page 113
5 5.7 Selec ting a Photo/D ensity Setting 5-34 Specif ying Co py Setti ngs Chapter 5 To select an Original Image T ype setting 1 Touch [Photo/Density], and t hen touch [Original Image Type]. 2 Select the Ori ginal Image Type setting ap- propriate f or the docu ment to be copied. ...
-
Kyocera KM-C2230 - page 114
5.7 Selecti ng a Photo/D ensity Setting 5 5-35 Specif ying Co py Setti ngs Chapter 5 ✎ Addi tiona l Inform ation If [Text & Photo], [Print ed Image], [Pho to Pa- per], or [Copi ed Paper] was select ed in step 3, the Scr een Pattern set tings are available. To select a Screen Pa ttern sett ing, touch [Scr een Pattern] , touch either [Grad atio ...
-
Kyocera KM-C2230 - page 115
5 5.7 Selec ting a Photo/D ensity Setting 5-36 Specif ying Co py Setti ngs Chapter 5 3 Touch [Enter]. The selected Origi nal Image Type setting is applied. ...
-
Kyocera KM-C2230 - page 116
5.7 Selecti ng a Photo/D ensity Setting 5 5-37 Specif ying Co py Setti ngs Chapter 5 To select the Backgro und, Density, Text Enhancement and “ Glossy Mode ” set- tings 1 Touch [Photo/Densit y]. 2 Select the de sired settings. ❍ To manually speci fy the density of the background col or, touch [Background], and then touch the Lighter and Darke ...
-
Kyocera KM-C2230 - page 117
5 5.7 Selec ting a Photo/D ensity Setting 5-38 Specif ying Co py Setti ngs Chapter 5 ❍ To automatically set the den sity of the background color, touch [Backg round], and then touch [Auto ]. ❍ To specify the density of the copy, touch [Density], a nd then touch t he Lighter and Darker keys to adjust the Density setting. ...
-
Kyocera KM-C2230 - page 118
5.7 Selecti ng a Photo/D ensity Setting 5 5-39 Specif ying Co py Setti ngs Chapter 5 ❍ For documents consistin g of text that overlaps images suc h as illustrations or graphs (text with a background), t ouch [Text Enhancemen t], and then touch or to select the desired text densi ty level. ❍ To copy a document with a glossy finish, touch [Glossy ...
-
Kyocera KM-C2230 - page 119
5 5.8 Ch ecking the Settin gs 5-40 Specif ying Co py Setti ngs Chapter 5 5.8 Checking th e Settings Press the [Mode Check] key in the control pan el to display the screens that show the current co py set- tings. From these screens, the copy settings can also be changed. To check the setting s 1 Press the [Mode Check] key in t he control panel. The ...
-
Kyocera KM-C2230 - page 120
5.8 Checki ng the Settings 5 5-41 Specif ying Co py Setti ngs Chapter 5 2 Touch [Next]. The second screen showin g the curren t set- tings appear s. 3 Touch [Next]. The third screen showing the cu rrent set- tings appear s. ...
-
Kyocera KM-C2230 - page 121
5 5.8 Ch ecking the Settin gs 5-42 Specif ying Co py Setti ngs Chapter 5 4 Touch [Next]. The fourth scr een showing the current set- tings appears. 5 Touch [Next]. The fifth screen sho wing the current settings appears. ...
-
Kyocera KM-C2230 - page 122
5.8 Checki ng the Settings 5 5-43 Specif ying Co py Setti ngs Chapter 5 ✎ Additional I nformation If the [Text] was se lected on the Original Image Type screen, the screen shown below appears in step 5. ...
-
Kyocera KM-C2230 - page 123
5 5.8 Ch ecking the Settin gs 5-44 Specif ying Co py Setti ngs Chapter 5 To change the settings 1 Press the [Mode Check] key in t he control panel. 2 Touch [Next] o r [Previo us] until t he screen containing the set ting that you wish to change appears. 3 Touch the key f or the setting t hat you wish to change. The corresponding screen appears. 4 F ...
-
Kyocera KM-C2230 - page 124
Access ibility Mode O perations Ch apter 6 6 6 Accessibility Mode Operations This chapter provi des information on the Accessibility mode function s. ...
-
Kyocera KM-C2230 - page 125
6 6.1 Settin g the “ Key Repe at St art/Interval ” Funct ion 6-2 Access ibility Mode O perations Ch apter 6 6.1 Setting the “ Key R epeat Start/In- terval ” Functio n If or is kept pre ssed when specifying a zoom ratio, the zoom rati o continues to increase or decrease. Example: To increase the setting Key repeat start time and key repe at ...
-
Kyocera KM-C2230 - page 126
6.1 Setting the “ Key Rep eat Start/Interva l ” Function 6 6-3 Access ibility Mode O perations Ch apter 6 To specify the key rep eat start time and key repeat interval The settings fo r the key repeat st art time and key re- peat int erval can be chang ed. (The default setting for the star t time is 0.8 second, and t he default set- ting for th ...
-
Kyocera KM-C2230 - page 127
6 6.1 Settin g the “ Key Repe at St art/Interval ” Funct ion 6-4 Access ibility Mode O perations Ch apter 6 3 Touch and to specify the desired Time to St art setting (key repeat start time) and Inte rval setting (r epeat inte rval), and then touch [Ent er]. The key repeat start t ime and key repeat in- terval are specified. 4 Touch [Exit]. The ...
-
Kyocera KM-C2230 - page 128
6.2 Setting the “ Enlarge-Display Notice ” Function 6 6-5 Access ibility Mode O perations Ch apter 6 6.2 Setting the “ Enlarge-Display No- tice ” Functio n When the panel reset t imer operation is performed, a message requesting co nfirmation to can cel the Enlarge Display mode can be displayed. (The de- fault s etting is “ No ” .) } Re ...
-
Kyocera KM-C2230 - page 129
6 6.2 Settin g the “ Enlarge-Di splay Noti ce ” Function 6-6 Access ibility Mode O perations Ch apter 6 To specify whether the confirmation me s- sage for cancelin g the Enlarge Display mode app ears 1 Press the [Accessibility] k e y in the control panel. 2 Touch [Enlarged Display Clear Check]. ...
-
Kyocera KM-C2230 - page 130
6.2 Setting the “ Enlarge-Display Notice ” Function 6 6-7 Access ibility Mode O perations Ch apter 6 3 Select whether the confirmat ion message for canceling the Enlarge Display mo de ap- pears and specify how long the messa ge is displ ayed, and then tou ch [Enter]. The cancellation confirmati on for the En- large Displ ay mode is specified. 4 ...
-
Kyocera KM-C2230 - page 131
6 6.2 Settin g the “ Enlarge-Di splay Noti ce ” Function 6-8 Access ibility Mode O perations Ch apter 6 Operations for the confirmation message for canceling the Enlarge Display mod e ✚ To continue specifying settings using the Enlarge Display mode, tou ch [Yes]. ✚ To clear the settings and return the Basic screen to its sta ndard size, tou ...
-
Kyocera KM-C2230 - page 132
6.2 Setting the “ Enlarge-Display Notice ” Function 6 6-9 Access ibility Mode O perations Ch apter 6 Outline of the Confirma tion to Cancel the Enlarge Display Mode The following diagram shows when the message requesti ng confirmation to cancel the Enlarge Dis- play mode appear s if the “ Panel Reset Timer ” func- tion is set to “ 1 min. ...
-
Kyocera KM-C2230 - page 133
6 6.2 Settin g the “ Enlarge-Di splay Noti ce ” Function 6-10 Access ibility Mode O perations Ch apter 6 ...
-
Kyocera KM-C2230 - page 134
Managin g Jobs Chap ter 7 7 7 Managing Jobs This chapter provi des information on managing jobs. ...
-
Kyocera KM-C2230 - page 135
7 7.1 Ove rview of Jo bs 7-2 Managin g Jobs Chap ter 7 7.1 Overview of Jobs } Reference For details, refer to “ Overview of Jobs ” on page 8-2 of the User ’ s Guide. Jobs If a document is loaded and t he [St art] key is pressed, the docu ment is scanned (when used as a printer, the print dat a is sent by the software to this machine) and the ...
-
Kyocera KM-C2230 - page 136
7.2 Disp laying the J ob List Scre en 7 7-3 Managin g Jobs Chap ter 7 7.2 Displaying the Jo b List Screen 1 Load the document to be copied, and then press th e [ Start] key in the control pane l. When a job has been q ueued, appears in the Basic screen. 2 Touch . The Job List screen appears. 3 Touch [Basic]. The Basic screen app ears again. ...
-
Kyocera KM-C2230 - page 137
7 7.3 Dele ting a Job 7-4 Managin g Jobs Chap ter 7 7.3 Del eting a Job For details, refe r to “ Overview of Jobs ” on page 8-2 of the User ’ s Guide. To delete a q ueued job Jobs listed as “ Waiting Print ” can be deleted. 1 While a job is being printed, touch in the Basic screen. The Job List screen appears. ...
-
Kyocera KM-C2230 - page 138
7.3 Deletin g a Jo b 7 7-5 Managin g Jobs Chap ter 7 2 Select th e job that you wish to delete, an d then touch [Delete] . The queued job is deleted . ...
-
Kyocera KM-C2230 - page 139
7 7.3 Dele ting a Job 7-6 Managin g Jobs Chap ter 7 To delete a jo b that is being pr inted 1 While the job is being printe d, press the [Stop] key in th e control panel. The message “ Job has been stopped. To resume job press the Start key. ” appears. 2 Touch [Deleted Jobs]. A list of queued jobs is displayed. ...
-
Kyocera KM-C2230 - page 140
7.3 Deletin g a Jo b 7 7-7 Managin g Jobs Chap ter 7 3 Select th e job that you wish to delete, an d then touch [Delete] . The message “ Jo b has been don e improp- erly. Ch eck the record. ” appears. 4 Touch [Enter], and then press the [Start ] key in the control panel. Printing of t he o ther jobs continues. ...
-
Kyocera KM-C2230 - page 141
7 7.4 Jo b List Screen s 7-8 Managin g Jobs Chap ter 7 7.4 Job List Screens } Reference For details, refer to “ Job Log Screens ” on page 8-4 of th e User ’ s Guide. If in the Basi c screen is touched while a job is being pr inted, the l ist of queu ed jobs and t heir de- tails can be viewed. Active Jobs screen Touch to display a list of acti ...
-
Kyocera KM-C2230 - page 142
7.4 Job Li st Screens 7 7-9 Managin g Jobs Chap ter 7 Active Scans sc r ee n Touch [Active Scans] in t he Job List screen to dis- play a list of jobs bein g scanned or que ued to be scanned in Scan mode. } Reference For details on the Scan mode, refer to the KM- C2230 Printer Controller User ’ s Guide. ...
-
Kyocera KM-C2230 - page 143
7 7.4 Jo b List Screen s 7-10 Managin g Jobs Chap ter 7 Stocked List screen Touch [Stocke d List] in the Job List screen to dis- play a list of jobs stored in t he memor y. } Reference For detai ls on th e “ Scan to Memory ” function, r e- fer t o “ Stor ing the Scanned Image in the Memory ( “ Scan to Memory ” Function) ” on page 7-2 of ...
-
Kyocera KM-C2230 - page 144
7.4 Job Li st Screens 7 7-11 Managin g Jobs Chap ter 7 ✎ Additional I nformation Stored jobs cannot be deleted (printed) f rom the Stocked List screen in Enlar ge Display mode. To delete a stored j ob, cancel Enlarge Display mode, and then perf orm the operation from the Job Control screen. For details, refer to “ Job Con- trol Screens ” on p ...
-
Kyocera KM-C2230 - page 145
7 7.4 Jo b List Screen s 7-12 Managin g Jobs Chap ter 7 Locked List screen Touch [Locked List] in the Job List screen to display a list of jobs that are locked and ca nnot be printed. } Reference For details on the “ Locked Job ” funct ion, refer to the KM-C2230 Printer Controller User ’ s Guide. ...
-
Kyocera KM-C2230 - page 146
7.4 Job Li st Screens 7 7-13 Managin g Jobs Chap ter 7 ✎ Additional I nformation Locked j obs cannot be deleted (p rinted) from the Locked List screen in Enlarge Display m ode. To unlock a job, cancel Enlarge Display mode, and then perform the op eration from the Job Control screen. For de tails, r efer to “ Locked Job s Screen ” on page 8 -1 ...
-
Kyocera KM-C2230 - page 147
7 7.4 Jo b List Screen s 7-14 Managin g Jobs Chap ter 7 Print Log screen Touch [Print Log] in the Job List screen to display a list of jo bs that have been printed an d those tha t have been deleted. ➜ To view a list of completed print jobs, touch [Fin- ished Jobs]. ➜ To view a list of print j obs that have been deleted after being queued, touc ...
-
Kyocera KM-C2230 - page 148
7.4 Job Li st Screens 7 7-15 Managin g Jobs Chap ter 7 Scan Log screen Touch [Scan Log] in the Job List screen to display a list o f jobs that have been scanned in Scan mode. ➜ To view a list of completed sca n jobs, touch [Fin- ished Jobs]. ➜ To view a list of scan jobs that have been delet ed after being queue d, touch [Deleted Jobs] . } Refe ...
-
Kyocera KM-C2230 - page 149
7 7.4 Jo b List Screen s 7-16 Managin g Jobs Chap ter 7 ...
-
Kyocera KM-C2230 - page 150
© 2004 http://www.kyoceramita.com @@@@ is a trademark of Kyocera Corporation 2004. 5 4036-7797-01 ...
Do you have a question concerning Kyocera KM-C2230?
Use the form below
If you did not solve your problem by using a manual Kyocera KM-C2230, ask a question using the form below. If a user had a similar problem with Kyocera KM-C2230 it is likely that he will want to share the way to solve it.