English dropdown-ico

Manual Kenwood KDC-W5534U

48 pages 0.97 mb
Download

Go to site of 48

Summary
  • Kenwood KDC-W5534U - page 1

    © B64-3346-00/00 (EW/E2W) CD-RECEIVER KDC-W6534U KDC-W5534U KDC-W534U INSTR UCTION MANU AL B64-3346-00_00.Indd 1 B64-3346-00_00.Indd 1 06.1.27 0:06:55 PM 06.1.27 0:06:55 PM ...

  • Kenwood KDC-W5534U - page 2

    2 | English Con tents Safety precautions 3 Notes 4 About CDs 6 About USB device 7 About AA C, MP3 and WMA 8 General featur es 10 Pow er Selecting the Source Volume Attenuator System Q Audio Control Audio Setup Speaker Setting Subwoofer Output Switching Display Theft Deterrent F aceplate TEL Mute T uner fea tures 15 T uning Station Pr eset Memor y A ...

  • Kenwood KDC-W5534U - page 3

    English | 3 Safety precautions About CD play ers/disc changers connected to this unit Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenw ood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD play ers released in 1997 o ...

  • Kenwood KDC-W5534U - page 4

    4 | English Notes • No USB device comes with this unit. Y ou need to purchase a commercially available USB device . For the types of available USB devices, ref er to <About USB device> (page 7). • If you experience problems during installation, consult your Kenwood dealer . • When you pur chase optional accessories, check with your Kenw ...

  • Kenwood KDC-W5534U - page 5

    English | 5 About DAB T uner control Refer to A gr oup on the Instruc tion manual of DAB T uner K TC-9090D AB (optional accessor y) for the control method of DAB Tuner function. However , the following control methods of the function for this unit may be differ ed from the Instruction manual; therefore, r efer to the following supplemental instruct ...

  • Kenwood KDC-W5534U - page 6

    6 | English Handling CDs • Do not touch the recor ding sur face of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Do not stick tape etc. on the CD , or use a CD with tape stuck on it. When using a new CD If the CD center hole or outside rim ha ...

  • Kenwood KDC-W5534U - page 7

    English | 7 About USB devic e Notes on Use of the USB devic e This unit can play audio files stored in the flash memory and digital audio player that have a USB port (these devices are referred to as USB devices in this document). The following restrictions are placed on the types and usage of available USB devices: A vailable USB devices • USB d ...

  • Kenwood KDC-W5534U - page 8

    8 | English About AA C, MP3 and WMA The playable AAC/MP3/WMA file (her eafter called Audio file) and the media format has the f ollowing limitation. The Audio file, which is not conforming to the specification, may not play normally , or the file and folder names may not display correctly . Playable A udio file • AAC, MP3, WM A • Attach the cor ...

  • Kenwood KDC-W5534U - page 9

    English | 9 Playing order of the A udio file • The Audio file pla ys in the order which is written by CD writing software. Y ou may be able to set the playing order by writing the play sequence numbers such as "01" to "99" at the beginning of the file name. • Audio files ar e played in the order the files are written. Y ou c ...

  • Kenwood KDC-W5534U - page 10

    10 | English General fea tures Powe r T urning ON the P ower Press the [SRC] button. • When the power is ON, the <Security Code> (page 28) is displayed as "CODE ON" or "C ODE OFF" . T urning OFF the P ower Press the [SRC] button for at least 1 sec ond. V olume Increasing V olume T urn the [ VOL] knob clockwise. Decreasin ...

  • Kenwood KDC-W5534U - page 11

    English | 11 Attenua tor T urning the volume down quickly . Press the [ A T T ] button. Each time you press the button, the Attenuat or turns ON and OFF . When the Attenuator is ON, the " A T T" indicator blinks. Sy stem Q Selecting the best sound setting preset for different types of music. 1 Select the source to set Press the [SRC] butt ...

  • Kenwood KDC-W5534U - page 12

    12 | English General fea tures Audio Setup Setting the Sound system, such as Cross over Network. 1 Select the source to adjust Press the [SRC] button. 2 Enter A udio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates be ...

  • Kenwood KDC-W5534U - page 13

    English | 13 Switching Displa y Changing the information display ed. 1 Enter S witching Display mode Press the C ontrol knob for at least 1 second. "DISP SEL " is displayed. 2 Select the Display item Push the Contr ol knob towards [ 4 ] or [ ¢ ]. In T uner source Information Display Progr am Ser vice name or Fr equency (FM) "FREQ/PS ...

  • Kenwood KDC-W5534U - page 14

    14 | English General fea tures TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL " is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL " display disappears and the audio system comes back ON. When the call ends Hang up the phon ...

  • Kenwood KDC-W5534U - page 15

    English | 15 T uner features T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob toward [FM], it switches between the FM1, F M2, and FM3 bands. 3 T une up or down band Push the Contr ol knob to ...

  • Kenwood KDC-W5534U - page 16

    16 | English T uner features Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Push the Contr ol knob towards [FM] or [ AM]. 2 Open Auto Memory Entry Press the [ AME] button for at least 2 seconds. " A-MEMORY" is displayed. When 6 stations that can be received are p ...

  • Kenwood KDC-W5534U - page 17

    English | 17 RDS featur es T raffic Information Changing to traffic information automatically when a traffic bulletin starts even when you are not listening to the radio . Press the [TI] button. Each time you press the button, the Traffic information function turns ON and OFF . When traffic information is ON, "TI" indicator is ON. When a ...

  • Kenwood KDC-W5534U - page 18

    18 | English RDS featur es PTY (Progr am T ype) Selecting the Program T ype and searching for a station. 1 Enter PTY mode Press the C ontrol knob. During PT Y mode the "PT Y" indicator is ON. • This function cannot be used during a traffic bulletin or AM reception. 2 Select the Program T ype Push the Contr ol knob towards [FM] or [ AM]. ...

  • Kenwood KDC-W5534U - page 19

    English | 19 Changing Language for PTY Function Selecting the Program T ype display language. 1 Enter PTY mode Refer to <PTY (Program Type)> (page 18). 2 Enter Changing Language mode Press the [TI] button. 3 Select the language Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob, the language alternates between the langu ...

  • Kenwood KDC-W5534U - page 20

    20 | English CD/USB device/A udio file/External disc control f eatures Playing CD & A udio file When there is no disc inserted 1 Drop open the fac eplate Press the Release button. 2 Insert a disc. 3 Push the fac eplate on the left side, and return it to its former position. • When the faceplate has been dropped open, it might interfere with t ...

  • Kenwood KDC-W5534U - page 21

    English | 21 F unction of the KDC-W6534U/KDC-W5534U Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display Disc player "CD CH" CD changer "MD CH" MD changer Pause and play Press the C ...

  • Kenwood KDC-W5534U - page 22

    22 | English CD/USB device/A udio file/External disc control f eatures T rack/File Search Searching for a song on the disc or in the Audio file folder . Push the Contr ol knob towards [ 4 ] or [ ¢ ]. • If the remote control with number buttons is used as optional accessories, you can directly select a song you want to listen to with the operatio ...

  • Kenwood KDC-W5534U - page 23

    English | 23 Random Play Play all the songs on the disc or Audio file f older in random order . Press the [RDM] button. Each time you press the button, Random Play turns ON or OFF . When the Random mode is ON, "DISC RDM"/ "FOLD RDM"/"RDM ON" is displayed. • When you push the Control knob toward [ ¢ ], the next rando ...

  • Kenwood KDC-W5534U - page 24

    24 | English CD/USB device/A udio file/External disc control f eatures F unction of Audio file File Select mode Y ou can select an audio file in the folder currently being played by file name . 1 Enter F ile Selec t mode Press the [F .SEL] button. Select the "FILE SEL " display . Refer to <Select mode> (page 23). File name displa y ...

  • Kenwood KDC-W5534U - page 25

    English | 25 F unction of Audio file Folder Select 2 mode Select the target folder within the folders containing audio files. The folder which c ontains playable audio files is only displayed . 1 Enter F older Select 2 mode Press the [F .SEL] button. Select the "FLD SEL2" display. Refer to <Select mode> (page 23). Folder name displa ...

  • Kenwood KDC-W5534U - page 26

    26 | English CD/USB device/A udio file/External disc control f eatures F unction of the KDC-W6534U F unction of ACDrive media Letter Seek Y ou can search for the song, y ou want to play , by selecting the initial of Genre name, Artist name, or Album name. 1 Enter the Letter Seek mode Press the [S.MODE] button f or at least 1 second. • This operat ...

  • Kenwood KDC-W5534U - page 27

    English | 27 Menu system Menu Sy stem Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button f or at least 1 second. "MENU" is displayed . 2 Selec ...

  • Kenwood KDC-W5534U - page 28

    28 | English Menu system F unction of the KDC-W6534U/KDC-W5534U In Standby mode Secur ity C ode Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is requir ed to turn on the audio unit when it is removed fr om the vehicle. Indication of this Secu ...

  • Kenwood KDC-W5534U - page 29

    English | 29 In Standby mode Manual Clock Adjustment • Y ou can do this adjustment when the <Synchronize Clock> (page 29) is set as OFF . 1 Select Clock Adjustment mode Push the Contr ol knob towards [FM] or [ AM]. Select the "CLK ADJ" display. 2 Enter Clock A djust mode Press the C ontrol knob for at least 1 second. The clock dis ...

  • Kenwood KDC-W5534U - page 30

    30 | English Menu system In Standby mode Dimmer Dimming this unit’ s display automatically when the vehicle light switch is turned ON. Display Setting "DIM ON" The display dims . "DIM OFF" The display doesn ’t dim. F unction of the KDC-W6534U In Standby mode Switching preout Alternating the preout between the rear and subwoo ...

  • Kenwood KDC-W5534U - page 31

    English | 31 F unction of the KDC-W6534U When LX AMP unit connecting AMP Con trol Y ou can control the LX AMP connected to the unit. 1 Select AMP Control mode Push the Contr ol knob towards [FM] or [ AM]. Select the " AMP CTRL " display. 2 Enter AMP C ontrol mode Press the C ontrol knob for at least 1 second. 3 Select the AMP Control item ...

  • Kenwood KDC-W5534U - page 32

    32 | English Menu system AF (A lternative F requency) When the reception is poor , automatically alternate to another frequency broadcasting the same program in the same RDS network with better reception. Display Setting " AF ON" The AF function is ON. " AF OFF" The AF function is OFF . When the AF function is ON, the "RDS& ...

  • Kenwood KDC-W5534U - page 33

    English | 33 F unction of the KDC-W6534U/KDC-W5534U Auxiliary Input Display Setting Selecting the display when alternating to Auxiliary input source. 1 Select Auxiliary input source Press the [SRC] button. Select the " A UX"/" AUX EXT" display . 2 Enter Menu mode Press the [MENU] button f or at least 1 second. "MENU" i ...

  • Kenwood KDC-W5534U - page 34

    34 | English Menu system F unction of the KDC-W6534U F unction of ACDrive media V oice Inde x Setting the announcement during the play of ACDrive media. Display Setting "V-ID ON" Guide is announced. "V-ID OFF" Not be announced. In CD/ USB mode Firm ware v ersion display Displaying the firmwar e version with the unit. 1 Select th ...

  • Kenwood KDC-W5534U - page 35

    English | 35 F unction of the KDC-W6534U Other than Standby mode Audio Pr eset Recall Recalling the sound setup register ed by <Audio Preset Memory> (page 34). 1 Select the source Press the [SRC] button. 2 Enter Menu mode Press the [MENU] button f or at least 1 second. "MENU" is displayed . 3 Select Audio Preset mode Push the Contr ...

  • Kenwood KDC-W5534U - page 36

    36 | English Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........1 4 ..........2 5 ..........1 6 ..........1 Installation Proc edure 1. T o prevent shor t circuits, r emove the key from the ignition and disconnect the - terminal of the battery. 2. Make the proper input and output wire connections for each unit ...

  • Kenwood KDC-W5534U - page 37

    English | 37 P.CONT ANT.CONT 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 SUB WOOFER MUTE Connecting Wires to T erminals (KDC-W6534U) Battery wire ( Y ellow) Ignition wire (Red) FM/AM antenna input Antenna Cord (ISO) Antenna Conversion A daptor (ISO–JASO) (Accessory 3 ) T o connect the K enwood navigation system, consult your navigation manual. Wiring harness ...

  • Kenwood KDC-W5534U - page 38

    38 | English Connecting Wires to T erminals (KDC-W5534U/W534U) P.CONT ANT.CONT 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 FRONT MUTE REMO. CONT Battery wire ( Y ellow) Ignition wire (Red) FM/AM antenna input Antenna Cord (ISO) Antenna Conversion A daptor (ISO–JASO) (Accessory 3 ) T o connect the K enwood navigation system, consult your navigation manual. Wi ...

  • Kenwood KDC-W5534U - page 39

    English | 39 Connecting W ires to T erminals Connector F unc tion Guide Pin Numbers for ISO Connectors Cable Colour Functions External Power Connector A-4 Y ellow Batter y A-5 Blue/White Power Control A-6 Orange/White Dimmer A-7 Red Ignition (AC C ) A-8 Black Earth (Ground) Connection Speaker Connector B-1 Purple Rear R ight (+) B-2 Purple/Black Re ...

  • Kenwood KDC-W5534U - page 40

    40 | English Screwing the F acepla te on the Unit If you want to fasten the faceplate to the main unit so that it does not fall off . 1 Refer to the section <Removing the hard rubber frame> (page 41) and then remove the hard rubber frame. 2 Drop open the faceplate by pressing the Release button. 3 Tighten the screw (ø2 × 5 mm) (A ccessor y ...

  • Kenwood KDC-W5534U - page 41

    English | 41 Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed , remove the lower two locations. • The frame can be removed from the bottom side in the same manner ...

  • Kenwood KDC-W5534U - page 42

    42 | English What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the following table f or possible problems. General ? The pow er does not turn ON. ✔ The fuse has blo wn. ☞ After checking for shor t circuits in the wires , replace the fuse with one wi ...

  • Kenwood KDC-W5534U - page 43

    English | 43 T uner source ? Radio reception is poor . ✔ The car ant enna is not extended. ☞ Pull the antenna out all the way . ✔ The ant enna control wire is not connected. ☞ Connect the wire correctly, r eferring to the section on <Connecting Wir es to T erminals> (page 37, 38). ? It isn’ t the set T raffic information sound volum ...

  • Kenwood KDC-W5534U - page 44

    44 | English The messages shown belo w display your systems condition. EJEC T: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. ➪ L oad the disc magazine properly. No CD in the unit. ➪ Insert the CD. NO DISC: No disc has been loaded in the disc magazine. ➪ L oad a disc into the disc magazine. TOC E ...

  • Kenwood KDC-W5534U - page 45

    English | 45 Specifications subject to change without notice. Audio section Maximum output power : 50 W x 4 (KDC-W6534U/W5534U) : 45 W x 4 (KDC-W534U) Output power (DIN 45324, +B=14.4V ) : 30 W x 4 (KDC-W6534U/W5534U) : 28 W x 4 (KDC-W534U) Speaker impedance : 4 - 8 Ω T one ac tion Bass : 100 Hz ±8 dB Middle : 1 kH z ±8 dB T reble : 10 kHz ±8 d ...

  • Kenwood KDC-W5534U - page 46

    B64-3346-00_00.Indd 46 B64-3346-00_00.Indd 46 06.1.27 0:08:02 PM 06.1.27 0:08:02 PM ...

  • Kenwood KDC-W5534U - page 47

    B64-3346-00_00.Indd 47 B64-3346-00_00.Indd 47 06.1.27 0:08:02 PM 06.1.27 0:08:02 PM ...

  • Kenwood KDC-W5534U - page 48

    B64-3346-00_00.Indd 48 B64-3346-00_00.Indd 48 06.1.27 0:08:03 PM 06.1.27 0:08:03 PM ...

Manufacturer Kenwood Category Car Stereo System

Documents that we receive from a manufacturer of a Kenwood KDC-W5534U can be divided into several groups. They are, among others:
- Kenwood technical drawings
- KDC-W5534U manuals
- Kenwood product data sheets
- information booklets
- or energy labels Kenwood KDC-W5534U
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kenwood KDC-W5534U.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kenwood KDC-W5534U, service manual, brief instructions and user manuals Kenwood KDC-W5534U. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kenwood KDC-W5534U.

Similar manuals

A complete manual for the device Kenwood KDC-W5534U, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kenwood KDC-W5534U by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kenwood KDC-W5534U.

A complete Kenwood manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kenwood KDC-W5534U - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kenwood KDC-W5534U, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kenwood KDC-W5534U, that we can find in the current document
3. Tips how to use the basic functions of the device Kenwood KDC-W5534U - which should help us in our first steps of using Kenwood KDC-W5534U
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kenwood KDC-W5534U
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kenwood KDC-W5534U in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kenwood KDC-W5534U?

Use the form below

If you did not solve your problem by using a manual Kenwood KDC-W5534U, ask a question using the form below. If a user had a similar problem with Kenwood KDC-W5534U it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)