English dropdown-ico

Manual Snapper ELT145H33HBV

40 pages 0.89 mb
Download

Go to site of 40

Summary
  • Snapper ELT145H33HBV - page 1

    Safety Instructions & Operator’s Manual for EUROPEAN LAWN TRACTOR HYDROSTATIC DRIVE SERIES H MODELS HYDROSTATIC DRIVE ELT145H33HBV MODEL NUM BER EXPLA NA T ION E LT 145 H 33 H B V EUROPEA N MO DEL MODEL DESIGNA T ION ENGINE HP ENGINE T YPE DRIVE SYST EM TYPE ENGINE MODEL CUTT ING WIDTH SERIES DESIGNATION E – European M odel LT – Lawn T ra ...

  • Snapper ELT145H33HBV - page 2

    2 IMPORTA NT SA FETY INSTRUCTIONS WARNING: This pow erful cuttin g machine is capable of amp utating hand s and feet and can t hrow ob jects that can cause injury and damag e! Failure to comply with the following SAFETY in stru ctions could resu lt in serious injury or death to the ope rator or other persons. The ow ner of the machine must understa ...

  • Snapper ELT145H33HBV - page 3

    3 IMPORTA NT SA FETY INSTRUCTIONS PREPA RATION (Continued From Pre vious Page) 7. Keep people and pe ts out of mowing area. Immediately STOP blades, STOP engine, and STOP mach ine if anyone enters the area. 8. Check shields, d eflectors, swit ches, blade controls an d other safety dev ices frequently for proper oper ation and location. 9. M ake sur ...

  • Snapper ELT145H33HBV - page 4

    4 TABLE OF CONTENTS IMPORTA NT SA FETY INST RUCTION S ............ 2-3 TA BL E OF C ONT ENT S ........................................ 4 SEC TION 1 - FA MILIA RIZA T ION ...................... 5-7 Compone nts ........................................................5 Controls ................................................................5 Decals / ...

  • Snapper ELT145H33HBV - page 5

    5 Section 1 - FA MILIA RIZA TION COMPONENTS The nom enclature drawings above, illus trate the essential com ponents of the SNAPPER Lawn Trac tor. It is recom m ended that all operators of this equipm ent becom e thoroughly fam iliar with the c omponents and their operation BEFO RE OPERATING. Spec ific details involving the engine ar e found in the ...

  • Snapper ELT145H33HBV - page 6

    6 Section 1 - FA MILIA RIZA TION – DECA LS / SYMBOLS A ll operators should locate, r ead and unders tand all decals on the mach ine before attempt ing any operation of the mac hine. If any operator has difficulty in under standing certa in symbols incorporated in the decals, an aut horized SNA PPER deale r should be contacte d for explanation. RO ...

  • Snapper ELT145H33HBV - page 7

    7 Section 1 - FA MILIA RIZA TION – DECA LS / SYMBOLS SA FETY INSTRUCTIONS. OP ERA TING I NS TRUCTIONS. CONTROL IDENTIFICA TION - 72754 FORW A RD REVERSE NEUTRA L DIRECT ION A ND SPEED CONT ROL 73424 HEIGHT OF CUT DECAL 4-6218 LOW EST HEIGHT OF CUT HIGHEST HEIGHT OF CUT CONSOLE DE CAL 7-3579 RA BBI T ”FA ST” TURTLE “SLOW” CHOKE ENGINE “O ...

  • Snapper ELT145H33HBV - page 8

    8 Section 2 - OPERA TING INSTRUCTIONS 2.1 PRE-ST A RT CHECKLIST Make the following c hecks and per form service as required bef ore each start-up. 2.1.1. Check tires and add air as needed to bring pressur e to 12 P.S.I. in front tires and 12 P.S.I. in rear tires . 2.1.2. Check guards, deflector s and covers to m ake sure all are in plac e and secur ...

  • Snapper ELT145H33HBV - page 9

    9 Section 2 - OPERA TING INSTRUCTIONS 2.3 STA RTING & OPERA TION 2.3.1. STARTING ENGINE 1. T ake a com fortable position in seat of m achine, look ar ound to mak e sure that the area y ou are going to mow is c lear of people, childr en and pets. Tak e note of any stationary obstacles! NOTE: The interlock s y s tem will prevent the engine f rom ...

  • Snapper ELT145H33HBV - page 10

    10 Section 2 - OPERA TING INSTRUCTIONS 2.3 STA RTING & OPERA TION (continued) 2.3.2. STARTING WHEEL DRIVE 1. Shift s peed control lever to neutral. 2. Start engine. Ref er to Section “START ING ENGINE” . 3. Release clutc h/brake pedal. 4. Slowly shif t speed control lever f orward for forward m otion or to the rear f or reverse m otion. See ...

  • Snapper ELT145H33HBV - page 11

    11 Section 2 - OPERA TING INSTRUCTIONS 2.4 STO PPING 2.4.3. STOPPIN G MO WER BLADE 1. Stop mower blade by moving blade engagem ent lever to the "OFF " position. See Figure 2.11. FIGURE 2.11 WA RNING Once blade is disengaged, it s hould come to a complete stop in 5 seconds or less. If the blade continues to rotate afte r 5 seconds, the bla ...

  • Snapper ELT145H33HBV - page 12

    12 Section 2 - OPERA TING INSTRUCTIONS 2.6. ROLLING TRACTOR WITH ENGINE OFF Rolling Hydro Models 1. W ith engine "OFF", m ove to rear of tr actor. 2. Pull the roll releas e control all the way out to disengage the hydro transmis sion. See Figure 2.15. FIGURE 2.15 3. Move tractor to desired location. 4. Push r oll release control all the w ...

  • Snapper ELT145H33HBV - page 13

    13 Section 2 - OPERA TING INSTRUCTIONS 2.7. RE VERSE LOCKOUT MECHA NIS M Data indicates that tragic back-over accidents occ ur each year. Thes e accidents us ually involve unsupervised children. Many times thes e children have been given rides on the machine and have been trained to view this potentially dangerous piece of m achinery as fun rather ...

  • Snapper ELT145H33HBV - page 14

    14 Section 3 - MA INTENA NCE 3.1 INTRODUCT ION To retain the quality of the Tr actor, use genuine SNAPPER replacem ent parts only. Contact a local SNAPPER dealer f or parts and servic e assistance. For the correc t part or inform ation for a particular Trac tor, alwa ys m e ntio n the model and ser ial number. SNAPPER recom mends returning the T ra ...

  • Snapper ELT145H33HBV - page 15

    15 Section 3 - MA INTENA NCE 3.2.3. CHECK 33" DECK DRIVE BELT 1. W ith engine "OFF ", move blade engagem ent lever to "ON". 2. Measure blade c able extension spring. Spring should extend 1" +/-1/8" f or proper belt tens ion. See Figure 3.3. FIGURE 3.3 3. T o adjust tension, Refer to Section “BLADE BELT ADJ USTME ...

  • Snapper ELT145H33HBV - page 16

    16 Section 3 - MA INTENA NCE 3.3.4. TRACTOR LUBRICATION 1. Front Wheel Bearings Lubricate each f ront wheel bearing through the grease f itting on w heel hub. Using general purpose grease in a greas e gun, add grease until grease purges f rom bearing. See F igure 3.5. FIGURE 3.5 2. A xle Spindles Lubricate each ax le spindle with 1 to 3 shots of ge ...

  • Snapper ELT145H33HBV - page 17

    17 Section 3 - MA INTENA NCE 3.3.4. TRACTOR LUBRICATION (Continued From Pre vious Page) 7. Steering Tie Rod Lubricate both ends of steering tie rod with a sm all amount of 30 wt. m otor oil fr om an oil can. See Figure 3.9. FIGURE 3.9 8. Blade Engag ement Mechan ism Using 30 wt. motor oil, lubricate the blade engagement mec hanism pivot points , wh ...

  • Snapper ELT145H33HBV - page 18

    18 Section 3 - MA INTENA NCE 3.4 A NNUALLY (END OF EA CH SEA SON) 3.4.2. FUEL FILT ER (Continued From Pre vious Page) 3. Install new fuel filter part num ber 1-4359. See Figure 3.13. FIGURE 3.13 4. Fill fuel tank with fresh gasoline. Ref er to engine owner's m anual for fuel s pecifications . 3.4.3. SPA RK PLUG Remove and replace engine spark ...

  • Snapper ELT145H33HBV - page 19

    19 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug. E ngine and components can be extre mely hot. A void burns by allowing engine and ...

  • Snapper ELT145H33HBV - page 20

    20 Section 4 - A DJUSTMENT & REPA IR 4.2.2. BLA DE BELT A DJUSTM ENT – 33” Deck (Continued from previous page ) IMPO RTA NT: If dec k front to rear level is not co rr ec t, this could cause blade belt pr oblems. 6. Move blade engagement lever to "ON". 7. Measure blade cable ex tension spring. Spring should extend 1" +/-1/8&qu ...

  • Snapper ELT145H33HBV - page 21

    21 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug. E ngine and components can be extre mely hot. A void burns by allowing engine and ...

  • Snapper ELT145H33HBV - page 22

    22 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug. E ngine and components can be extre mely hot. A void burns by allowing engine and ...

  • Snapper ELT145H33HBV - page 23

    23 Section 4 - A DJUSTMENT & REPA IR 4.3 TRACTOR DRIVE COMPONENTS 4.3.1. BRA KE ADJUSTMENT 1. T o be properly adjusted, the brak e should stop the trac tor in approx imately 6 feet from top speed when the clutch/brak e pedal is fully depressed. 2. Adjus t brake when necess ary as follows: 3. T urn engine “OFF”. Rem ove k ey . 4. Locate brak ...

  • Snapper ELT145H33HBV - page 24

    24 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustments, maint enance or service with the engine or blade running. STOP blade. ST OP engine. Set brake. Remove key. Remov e spark plug w ire from sp ark plug and secure wire away from spa rk plug. Engine a nd components can be extremely hot. Avoid burns by allowing engine and ...

  • Snapper ELT145H33HBV - page 25

    25 Section 4 - A DJUSTMENT & REPA IR 4.4.2. (NINJA ) BLA DE WEA R LIM ITS The ninj a recycling blade requires m ore fr equent service intervals than s tandard blades. Check for exc essive wear and damage bef ore each use. See Figur e 4.18. FIGURE 4.18 4.4.3. (STA NDA RD) BLA DE SHA RPE NING Blades should be k ept sharp at all tim es. W hen the ...

  • Snapper ELT145H33HBV - page 26

    26 Section 4 - A DJUSTMENT & REPA IR 4.4.5. 33" M OWER BLADE REPLA CEM ENT (Continued) 6. Install new blade, part num ber 3-4168, onto blade mounting bar . 7. T orque 30 to 40 ft lbs. 4.4.6 T RA CT ION DRI VE BELT REPLACEMENT It is necess ary to remove deck in order to replace belts. Rem ove deck as follows: 1. Place tr actor on a firm , l ...

  • Snapper ELT145H33HBV - page 27

    27 Section 4 - A DJUSTMENT & REPA IR Traction driv e belt removal (Continued from previous page ) 2. Slide belt guide ass embly to the rear and rem ove. 3. Disconnec t traction belt idler pulley spring from tractor f rame. See F igure 4.26. FIGURE 4.26 WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade run ...

  • Snapper ELT145H33HBV - page 28

    28 Section 4 - A DJUSTMENT & REPA IR Tractio n drive belt replacemen t (Continued from previous page ) NOTE: W hen ins talling a new belt, mak e certain the stationary idler is m ounted in the hole closest to the L.H. side of the trac tor. See Figure 4.29. 4. Mak e certain belt is within belt guides of idler s. 5. Attach tension idler spring to ...

  • Snapper ELT145H33HBV - page 29

    29 Section 4 - A DJUSTMENT & REPA IR 4.5 BA T TERY 4.5.1. BA T TERY REM OVA L 1. Raise operator 's seat. 2. Rem ove the two adjusting knobs . 3. Rem ove seat assem bly and move forward. Use care not to disc onnect wires from seat switch. See Figure 4.33. FIGURE 4.33 4. Rem ove negative ( - ) cable f irst. 5. Rem ove positive ( + ) c able l ...

  • Snapper ELT145H33HBV - page 30

    30 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT OVERFILL! DO NO T attempt to service or charge the b att ery wh ile it is installed on the machine. DO NOT use “BOOST ” chargers on th e battery. 4.5.5. BA T TERY T ESTING There are two types of battery tests: Unloaded and Loaded. The unloaded tes t is the procedure that will be discuss e ...

  • Snapper ELT145H33HBV - page 31

    31 Section 4 - A DJUSTMENT & REPA IR A VA ILA BLE A CCESSORIES The SNAPPER Series H LAW N T RACTOR can be equipped with a variety of access ories that increase its versatility. The acces sories available for each model ar e listed in the c hart below. Contact an authorized SNAPPER dealer for or dering any of the acc essories desir ed. AV AI L A ...

  • Snapper ELT145H33HBV - page 32

    32 SECTION 5 - ELECTRICA L SYSTEM Figure 5.1 illustr ates ty pic al harness routing on s ome Snapper Lawn T ractors. Us e this when locating various electric al com ponents. FIGURE 5.1 TO BATTERY NEGA TIVE (-) TERM IN A L TO BATTERY POSITIVE ( +) TERM IN A L SOLENOID (UNDER SEAT) SEA T SWITCH IGNIT ION SWITCH HEA DLIGHT SWITCH 20 A M P FUSE PA RK B ...

  • Snapper ELT145H33HBV - page 33

    33 SECTION 5 - ELECTRICA L SYSTEM SCHEMATICS BRIGGS & STRA T TON WIT HOUT LIGHTS FIGURE 5.2 BRIGGS & STRA T TON WIT H LIGHTS FIGURE 5.3 ...

  • Snapper ELT145H33HBV - page 34

    34 TROUBLESHOOTING GUIDE PROBLEM PROBA BLE CAUSE CORRECTIVE A CTION Starter Will Not Crank Engine 1. Battery dead. 1. Service battery. 2. Blown fuse. 2. Replace fus e. 3. Electrical c onnections loose or c orroded. 3. Clean and check connections f or good contact. 4. Defective ignition s witch. 4. Contact authorized SNAPPER dealer. 5. Starter Spins ...

  • Snapper ELT145H33HBV - page 35

    35 TROUBLESHOOTING GUIDE PROBLEM PROBA BLE CAUSE CORRECTIVE A CTION Tractor Will Not Move Or L oss Of Traction 1. Speed control handle in the neutral “ N” position. 1. Place speed contr ol in desired speed. 2. Roll release contr ol in “ROLL” position. (Hydro Models Only) 2. Move roll release c ontrol to the engaged position. 3. Low transm i ...

  • Snapper ELT145H33HBV - page 36

    36 MA INTENA NCE SCHEDULE SUBJECT SERVICE TO BE PERFORM ED REFERENCE PAGES EACH USE 5 HOURS 25 HOURS 50 HOURS 100 HOURS EACH SEASON Engine Check Oil Lev el Page 8 X Engine Initial Oil Change Page 14 X Engine P eriodic Oil Change Page 15 X* A ir Pre-Cleaner Service Sponge Pre - Cleaner Element Engine Manual X** A ir Clean er Replace Element Engine M ...

  • Snapper ELT145H33HBV - page 37

    37 3 YEA R LIM ITED WARRA NTY For three (3) y ear s from purchase date f or the original purchas er's residential, non-c omm ercial use, SNAPPER , through any authorized SNA PPER dealer will replace, free of charge (exc ept for taxes where applicable), any part or parts found upon exam ination by the f actory at McDonough, Georgia, to be defec ...

  • Snapper ELT145H33HBV - page 38

    38 SERVICE NOTES ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ _____________________________________________________________ ...

  • Snapper ELT145H33HBV - page 39

    39 SERVICE NOTES ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ _____________________________________________________________ ...

  • Snapper ELT145H33HBV - page 40

    40 Safety Instructions & Operator’s Manual for EUROPEAN LAWN TRACTOR HYDROSTATIC DRIVE SERIES H IMPORTANT Snapper products are built us ing engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emiss ions information and cr itical safe ty warnings. Read, ...

Manufacturer Snapper Category Lawn Mower

Documents that we receive from a manufacturer of a Snapper ELT145H33HBV can be divided into several groups. They are, among others:
- Snapper technical drawings
- ELT145H33HBV manuals
- Snapper product data sheets
- information booklets
- or energy labels Snapper ELT145H33HBV
All of them are important, but the most important information from the point of view of use of the device are in the user manual Snapper ELT145H33HBV.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Snapper ELT145H33HBV, service manual, brief instructions and user manuals Snapper ELT145H33HBV. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Snapper ELT145H33HBV.

Similar manuals

A complete manual for the device Snapper ELT145H33HBV, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Snapper ELT145H33HBV by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Snapper ELT145H33HBV.

A complete Snapper manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Snapper ELT145H33HBV - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Snapper ELT145H33HBV, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Snapper ELT145H33HBV, that we can find in the current document
3. Tips how to use the basic functions of the device Snapper ELT145H33HBV - which should help us in our first steps of using Snapper ELT145H33HBV
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Snapper ELT145H33HBV
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Snapper ELT145H33HBV in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Snapper ELT145H33HBV?

Use the form below

If you did not solve your problem by using a manual Snapper ELT145H33HBV, ask a question using the form below. If a user had a similar problem with Snapper ELT145H33HBV it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)