English dropdown-ico

Manual Belling SCBI90FP

44 pages Not applicable
Download

Go to site of 44

Summary
  • Belling SCBI90FP - page 1

    Belling Built-in Gas 083137303 17 .12.2012 Users Guide & Installation Handbook ...

  • Belling SCBI90FP - page 2

    contents & IntRoDUctIon CONTENTS • SAFET Y • USING THE PRODUCT • CLEANING • INST ALLA TION INSTRUCTIONS • TECHNICAL DA T A • CUSTOMER CARE INTRODUCTION Thank you for buying this British- built appliance from us. This guide book is designed to help you through each step of owning your new cooker , from installation ...

  • Belling SCBI90FP - page 3

    Safety 5.1 BEFORE USING THE PRODUCT Make sure that you ha ve removed all packaging and wrapping. Some of the items inside this appliance may have additional wrapping. Please note:- these safety warnings cover both gas and electric products. GENERAL WARNING! - The appliance and its accessible parts become hot during use. Care should be taken to avoi ...

  • Belling SCBI90FP - page 4

    Safety 5.1 affect the saf ety and performance, particularly in relation to surf ace temperatur es becoming hot and gas oper ated parts not workingefciently . The cooling fan (if tted)isdesigned to run on after the control knob has been switched off . • Do not spr ay aerosols in the vicinity of this appliance while it is in ...

  • Belling SCBI90FP - page 5

    Safety 5.1 on the base of the oven or cover the o ven base with foil, as this can cause the base element to overheat. WARNING! - The top element gets extremely hot when in use, so take extr a care to avoid touching it. WARNING! - Do not modify the outer panels of this appliance in any w ay . WARNING! - This appliance must be earthed. WARNING! - The ...

  • Belling SCBI90FP - page 6

    Safety 5.1 Do Not • Never place items on the door while it is open. • Never wrap f oil around the oven shelvesorallowfoiltoblocktheue. • Never drape tea towels near the o ven whileitison;thiswillcauseare hazard. • Never pull heavy items, such as turkeys or large joints of mea ...

  • Belling SCBI90FP - page 7

    USING THE GRILL - ELECTRIC (If fITTEd) 7 .130 Caution: Accessible parts may be hot when the grill is used - young children should be kept away. a grill pan handle can be purchased as an optional extra from our spar es department quoting the numbers below . Handle - 082283705 Handle grip - 082469100 Complete grillpan pack - 012635666 Contact details ...

  • Belling SCBI90FP - page 8

    7 .000  Caution: Accessible parts may be hot when the grill is used - young children should be kept away. a grill pan handle can be purchased as an optional extra from our spar es department quoting the numbers below . Handle - 082283705 Handle grip - ...

  • Belling SCBI90FP - page 9

    using the top oven - gas USING THE TOP OVEN Ignition Push in and turn the top oven control knob to the ‘FULL ON’ position. Hold the control knob in, and press the ignition switch(iftted)orholdalightedmatch or taper to the burner , until the burner lights. Hold the control knob in for 15 seconds. Do not hold the contro ...

  • Belling SCBI90FP - page 10

    using the top oven - gas OVEN FURNITURE Baking tray and roasting tins For best cook ed results and even brown- ing, the maximum size baking tra ys and roasting tins that should be used are as follows; Baking tray 350mm x 330mm Roasting tin 370mm x 320mm Position baking tr ays and roasting tins on the middle of the shelves, and leave one clear shelf ...

  • Belling SCBI90FP - page 11

    using the top oven - gas Dish Recommended gas mark Suggested shelf position Approximate cooking time (preheated  Scones Meringues 7 “S” slow setting top - middle bottom 10 - 15 mins 2 - 3 hours Cakes Small cakes Whisked sponge Swiss roll Victoria sandwich (2x180mm/7”pershelf ) Genoese Sponge (2x180mm/ ...

  • Belling SCBI90FP - page 12

    using the top oven - gas Traditional fruit cakes It should be remembered that ovens can vary ov er time, therefore cooking times canvary ,makingitdifculttobeprecise when baking fruit cakes. It is necessary therefore, to test the cake beforeremov alfromtheoven.Useane warmed skewer inserted into t ...

  • Belling SCBI90FP - page 13

    using the top oven - gas Cook in oven at Gas Mark 5 Approximate Cooking Time  Beef Rare Medium W ell done 20minutesper450g(1lb),plus20minutes 25minutesper450g(1lb),plus25minutes 30minutesper450g(1lb),plus30minutes Lamb Medium W ell Done 25 ...

  • Belling SCBI90FP - page 14

    USING THE MAIN OVEN - GAS USING THE MAIN OVEN Ignition Push in and turn the main oven control knob to the ‘FULL ON’ position. Hold the control knob in, and press the ignition switch(iftted)orholdalightedmatch or taper to the burner , until the burner lights. If after 15 seconds, the burner has not lit, turn off the ov ...

  • Belling SCBI90FP - page 15

    USING THE MAIN OVEN - GAS For roasting joints of meat or poul try , and for pot roasts preheat the ov en to gas mark 6 and cook for 30 minutes, then adjust the oven control to the “S” slow setting for the remainder of the cooking time. Slow cooking times will be about three times as long as conventional cooking times. MAIN OVEN BAKING GUIDE Dis ...

  • Belling SCBI90FP - page 16

    USING THE MAIN OVEN - GAS Traditional fruit cakes It should be remembered that ovens can vary ov er time, therefore cooking times canvary ,makingitdifculttobeprecise when baking fruit cakes. It is necessary therefore, to test the cake beforeremov alfromtheoven.Useane warmed skewer inserted into ...

  • Belling SCBI90FP - page 17

    USING THE MAIN OVEN - GAS Roasting guide The times given in the roasting guide are only approximate, because the size andageofthebirdwillinuencecooking times as will the shape of a joint and the proportion of the bone. Frozen meat should be thoroughly thawed before cooking. F or large joints it is advis- able to thaw over ...

  • Belling SCBI90FP - page 18

    The clock on this product has two modes of operation, fully automatic or semi automatic. This product is intended for use on the semi-automatic mode only . If for some reason this mode has not been pre-set already , the following procedure shouldbeusedtosetittothismode:- 1. T urn the power off to the appliance for 30 seconds ...

  • Belling SCBI90FP - page 19

    SEMI-AUTOMATIC COOKING The duration method • Pressthefunctionbuttontwice,(1) which will skip past the Minute Minder . • TheLEDdisplaywillashtheword ‘dur’ ,(2)andthe‘A ’wil lashonthe left hand side of the display . • Use the Plus and Minus buttons to set the len ...

  • Belling SCBI90FP - page 20

    USING THE MINUTE MINDER (IF FITTED) ELECTRONIC MINUTE MINDER The digital timer enables you to set the time of day (24 hour clock) and the min- ute minder alarm. Setting the “Time of Day” • Switch on the electricity supply to the appliance. • Thedisplaywillash. • Press and release the time of day button. • Set the ...

  • Belling SCBI90FP - page 21

    cleaning General • It is important to clean the product regularly as a build up of fat can af - fect its performance or damage it and may inv alidate your guarantee. • Always switch off y our appliance and allow it to cool down before you clean any part of it. • Do not use undiluted bleaches, products containing chlorides, wire wool ...

  • Belling SCBI90FP - page 22

    Cleaning REMOVING OVEN PARTS FOR CLEANING  • The inner door glass panel can be removed f or cleaning but it must be replaced the right way up . If there is any writing on the glass, you must be able to read it clearly when the cavity doors ...

  • Belling SCBI90FP - page 23

    installation Beforeyoustart:Pleasereadtheinstruc - tions. Planning your installation will save you time and effort. Prior to installation, ensure that the local distribution conditions (nature of the gas andgaspressure)andtheadjustmentof the appliance are compatible. The adjust- ment conditions are stated on t ...

  • Belling SCBI90FP - page 24

    INSTALLATION - 60CM STEP 1 : PREPARE INSTALLATION Do not lift the appliance by the door handle. Whilst every care is taken to elimi- nate burrs and raw edges f rom this product,please take care when handling - we recommend the use of protective gloves during installation. Please note that the weight of this appliance is approximately 31kg (unpacked ...

  • Belling SCBI90FP - page 25

    INSTALLATION - 60CM i)Wheninstalledinatypical600mm deep built in housing unit, the false back should be removed fr om the housing unit to provide the necessary depth for installation. ii)Whenthefalsebackisremov ed,itis normally the case that the support shelf for the appliance leaves a gap between the ba ...

  • Belling SCBI90FP - page 26

    INSTALLATION - 70CM Before you start Please read the instructions carefully - planning your installation will save y ou time and effort. Look at the different w ays the appliance can be installed - as shown on the following pages - and plan the installation to suit your situation. Leave the appliance in the base tr ay packaging until you are ready ...

  • Belling SCBI90FP - page 27

    INSTALLATION - 70CM METHOD 1: WITHOUT HOUSING  Before installing the appliance, check the internal dimensions as shown. The space for the appliance must be clear of obstruction. Y ou may have to cut into or remove any r ear cross members to obtain the 550mm minimum depth. ...

  • Belling SCBI90FP - page 28

    INSTALLATION - 70CM METHOD 2: HOUSING UNIT WITH internal height less than 710mm. Note:Y ouwillnotneedthe2sidetrims (687mmlong)ortheappliancerunners for this installation. Y ou will need the 2 runnerstoxtotheadjacentcabinets. Before you start; Before removing the bot tom shelf or modi ...

  • Belling SCBI90FP - page 29

    INSTALLATION - 70CM METHOD 3: HOUSING UNIT WITH INTERNAL HEIGHT 710MM OR MORE Note:Y ouwillnotneedthe4runnersand 2 trims that are packed with the oven f or this installation. 1. When installed in a typical 600mm deep built in housing unit, the false back should be removed fr om the housing unit to provide the necessary de ...

  • Belling SCBI90FP - page 30

    INSTALLATION - 90CM STEP 1 : PREPARE INSTALLATION Do not lift the appliance by the door handle. Remov ethexingscrewsfromthe polythene bag on the top of the appli- ance, but leave the appliance in the base tr ay packaging until you are ready to install it. Whilst every care is taken to eliminate burrs and raw edges f rom this appli ...

  • Belling SCBI90FP - page 31

    INSTALLATION - 90CM Dimensions Theapplianceisdesignedtotintoa standard 600mm wide housing unit, with minimum internal dimensions as shown. Note:Allsizesarenominal,somev ariation is to be expected. Step 2 : Connect to gas supply 1. The inlet to the appliance is ISO 7 - Rp ½” internal thread situated ...

  • Belling SCBI90FP - page 32

    installation Makesurethattheexible connector does not block the cooling fan inlet. 4. Flexible connections should comply with BS 669. Parts of the appliance lik ely to come into contactwithaexibleconnectorhavea temperature rise of less than 70°C. 5. Rigid connections must be accessible to disconnect for servi ...

  • Belling SCBI90FP - page 33

    installation For products without a plug This appliance must be connected by a competentperson,usingxedwiringvia a double pole switched fused spur outlet, with a contact separation of 3mm at all poles. Use a 13 amp fuse. W e recommend that the appliance is connectedbyaqualiedelectrician, who will comply with the I.E ...

  • Belling SCBI90FP - page 34

    installation Step 4: Secure appliance into hous- ing unit Note:Theunithousingtheappliance mustbeappropriatelyxed.Ensurethat the appliance is centrally located. T ake care not to damage the appliance or cabinetry . 70cm only Method1:Caremustbetakentoensure theappliancerunners ...

  • Belling SCBI90FP - page 35

    installation  Theanti-staintrimisfactoryttedto the edges of the appliance front fr ame. This trim provides the cabinetry with extra protection fr om any escape of heat. - When Installing the product, ensure the anti-stain trim is correctly located ...

  • Belling SCBI90FP - page 36

    installation Commissioning Pressure test point Use the oven burner . From inside the oven remov e the burner cowl. Remove the small screw at the LHS of the burner cradle. Slide the burner to the left to ac- cess the injector . Connect suitable T -piece (incorporating a115injector)totheinjector .Connect manometer to the T -piece ...

  • Belling SCBI90FP - page 37

    TECHNICAL DATA 14.000 Data badge Lower part of front fr ame and rear of appliance Pressure setting G20 Natural Gas @ 20 mbar G30 Butane @ 28-30 mbar G31 Propane @ 37 mbar GAS DATA 60cm 70/90cm - Oven & Grill 70/90cm - Double Oven Appliance class Class 3, built-in ov en and grill Countries of destination GB - Great Britain, IE - Ireland Electric ...

  • Belling SCBI90FP - page 38

    customer care FAQs What parts of the appliance can be washed in a dishwasher? • Any enamelled parts such as the grill pan can be cleaned in a dishwasher , as can oven shelves and shelf guides. What parts must NOT be cleaned in a dishwasher? • Parts such as burner skirts and caps, control knobs and any cast iron items must not be cleaned i ...

  • Belling SCBI90FP - page 39

    CUSTOMER CARE CUSTOMER CARE WEB SHOP Having purchased a superior cooker , hob or hood from us, you’ll naturally want to keep it looking great. And who better to help you care for it than the manuf ac- turer? W e offer an extensive r ange of accesso- ries, components and cleaning products which, will instantly give your cooker a good as new look. ...

  • Belling SCBI90FP - page 40

    customer care 15.040 CUSTOMER CARE CHANGING LIGHT BULBS  Warning: There is a risk of electric shock, so alwa ys make sure you hav e turned off and unplugged your appliance bef ore starting. Always allow the product to cool down bef ore you change a bulb. Not all appliances have the same number and type of bulb ...

  • Belling SCBI90FP - page 41

    Please keep this handbook for f uture reference, or for an yone else who may use the appliance. ...

  • Belling SCBI90FP - page 42

    Please keep this handbook for f uture reference, or for an yone else who may use the appliance. ...

  • Belling SCBI90FP - page 43

    Please keep this handbook for f uture reference, or for an yone else who may use the appliance. ...

  • Belling SCBI90FP - page 44

    CUSTOMER CARE T o contact Belling about your appliance, please call Warranty Registration 0844 481 0182 to register your appliance Customer Care Helpline 0844 815 3746 incaseofdifcultywithintheUK Alternatively general, spar es and service information is available f rom our website at www.belling.co.uk Please ensure that you hav ...

Manufacturer Belling Category Oven

Documents that we receive from a manufacturer of a Belling SCBI90FP can be divided into several groups. They are, among others:
- Belling technical drawings
- SCBI90FP manuals
- Belling product data sheets
- information booklets
- or energy labels Belling SCBI90FP
All of them are important, but the most important information from the point of view of use of the device are in the user manual Belling SCBI90FP.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Belling SCBI90FP, service manual, brief instructions and user manuals Belling SCBI90FP. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Belling SCBI90FP.

Similar manuals

A complete manual for the device Belling SCBI90FP, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Belling SCBI90FP by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Belling SCBI90FP.

A complete Belling manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Belling SCBI90FP - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Belling SCBI90FP, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Belling SCBI90FP, that we can find in the current document
3. Tips how to use the basic functions of the device Belling SCBI90FP - which should help us in our first steps of using Belling SCBI90FP
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Belling SCBI90FP
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Belling SCBI90FP in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Belling SCBI90FP?

Use the form below

If you did not solve your problem by using a manual Belling SCBI90FP, ask a question using the form below. If a user had a similar problem with Belling SCBI90FP it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)