Manual Life Fitness Heavy Duty Multi Rack

16 pages 1.75 mb
Download

Go to site of 16

Summary
  • Life Fitness Heavy Duty Multi Rack - page 1

    HEA VY DUTY MUL TI RACK (HDMR) W ARNING: Read and follow all directions for each step to insure proper assembly of this product. CLASS SB (S tudio): Professional and / or commercial use (Commercial Use Only) P ART #7671 101 B-1 DA TE: 2/08 ...

  • Life Fitness Heavy Duty Multi Rack - page 2

    2 HAMMER STRENGTH HEA VY DUTY RACKS SAFETY & W ARRANTY Purchasers of Hammer S trength products should read the Owner's Manual and all of the warning labels on the product s before using them. Because these products may be used in commercial settings, it is the purchaser's responsibility to instruct all individuals, whether users, trai ...

  • Life Fitness Heavy Duty Multi Rack - page 3

    3 5,135,449 ; D321,391; 5,100,080 ; 5,171,198 ; 5,273,505 ; 5,181,896 ; D321,027; 5,066,00 3; D321,389; 5,135,45 6; D321,387; 5,125,88 1; 6,203,474B1 5,044,63 1; D321,026; 5,006,00 4; D321,390; 5,180,35 4; 5,273,50 4; 5,050,87 3; This exercise machine is covered by one or more of the following U.S. patents: and other patents pending. HAMMER/STRENGT ...

  • Life Fitness Heavy Duty Multi Rack - page 4

    4 LIMITED W ARRANTY WHA T IS COVERED This Hammer S trength commercial exercise equipment (Signature Benches and Racks) is warranted to be free of all defects in material and workmanship to the original purchaser for the specific items and duration listed: O 10 years on structural frame O 1 year on grips O 1 year for rust or corrosion of structural ...

  • Life Fitness Heavy Duty Multi Rack - page 5

    5 LIMITED W ARRANTY EXCLUSIVE W ARRANTY THIS LIMITED W ARRANTY IS IN LIEU OF ALL OTHER W ARRANTIES OF ANY KIND EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED T O THE IMPLIED W ARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE, AND ALL OTHER OBLIGA TIONS OR LIABILITIES ON OUR P ART . We neither assume nor authorize any pers ...

  • Life Fitness Heavy Duty Multi Rack - page 6

    6 COMPONENTS LIST * ITEM NO. QTY . P ART NO. DESCRIPTION 1 1 HDMR8-CFUPL-0 FRONT LEFT UPRIGHT 2 1 HDMR8-LSFL-0 LOWER LEFT BASE 3 42 HHB.5X4.5 1/2 X 4-1/2” BOL T 4 54 H-BACK-W ASH BACKING DOME W ASHER 5 44 WASH.5ST AR 1/2" INTERNAL LOCK W ASHER 6 44 NUT .5LOCK 1/2" THICK LOCK NUT 7 1 HDMR8-CFUPR-0 FRONT RIGHT UPRIGHT 8 1 HDMR8-LSFR-0 LOW ...

  • Life Fitness Heavy Duty Multi Rack - page 7

    7 HARDW ARE: 20 3 16 5 6 17 4 18 ½ X 3-1/2” Bolt ½ X 4-1/2” Bolt 3/8 X 4-1/2” Bolt ½” Internal Lock W asher 3/8” Flat W asher Backing Dome W asher 3/8” Lock Nut Backing Dome W asher ½” Lock Nut ...

  • Life Fitness Heavy Duty Multi Rack - page 8

    8 STEP 1:  LOOSEL Y assemble the FRONT LEFT UPRIGHT (1) to the LOWER LEFT BASE (2) using two 1/2 X 4-1/2” BOL TS (3), two BACKING DOME WASHERS (4), two 1/2” INT LOCK WASHERS (5) and two 1/2” LOCK NUTS (6).  LOOSEL Y assemble the FRONT RIGHT UPRIGHT (7) to the LOWER RIGHT BASE (8) using two 1/2 X 4-1/2” BOL TS (3), two BACKING DOME WAS ...

  • Life Fitness Heavy Duty Multi Rack - page 9

    9 STEP 2:  LOOSEL Y assemble the REAR CROSS BRACE (9) to the bottom of the LOWER LEFT BASE (2) and LOWER RIGHT BASE (8) using four 1/2 X 4-1/2” BOL TS (3), four BACKING DOME WASHERS (4), four 1/2” INT T OOTH LOCK W ASHERS (5) and four 1/2” LOCK NUTS (6).  LOOSEL Y assemble the PULL-UP SUPPORT (10) to the top of the FRONT LEFT UPRIGHT (1 ...

  • Life Fitness Heavy Duty Multi Rack - page 10

    10 STEP 3:  LOOSEL Y assemble the SHORT LEFT UPRIGHT (1 1) to the LOWER LEFT BASE (2) using two 1/2 X 4-1/2” BOL TS (3), two BACKING DOME WASHERS (4), two 1/2” INT LOCK WASHERS (5), and two 1/2” LOCK NUTS (6).  LOOSEL Y assemble the SHORT RIGHT UPRIGHT (12) to the LOWER RIGHT BASE (8) using two 1/2 X 4-1/2” BOL TS (3), two BACKING DOM ...

  • Life Fitness Heavy Duty Multi Rack - page 11

    11 1 4 3 3 5 6 6 5 13 4 11 12 7 STEP 4:  LOOSEL Y assemble the two MUL TI RACK FRONT SUPPORTS (13) to the FRONT LEFT & RIGHT UPRIGHTS (1 & 7) and the SHORT LEFT & SHOR T RIGHT UPRIGHTS (1 1 & 12) using eight 1/2 X 4-1/2” BOL TS (3), eight 1/2” INT LOCK W ASHERS (5), eight 1/2” BACKING DOME W ASHERS (4), and eight 1/2” LOC ...

  • Life Fitness Heavy Duty Multi Rack - page 12

    12 14 1 3 4 5 6 6 5 4 3 7 8 2 STEP 4:  LOOSEL Y assemble the two REAR UPRIGHTS (14) to the LOWER LEFT & RIGHT BASES (2 & 8) and FRONT LEFT & RIGHT UPRIGHTS (1 & 7) using eight 1/2 x 4-1/2” BOL TS (3), eight 1/2” BACKING DOME W ASHERS (4), eight 1/2” INT LOCK W ASHERS (5), and eight 1/2” LOCK NUTS (6). ...

  • Life Fitness Heavy Duty Multi Rack - page 13

    13 STEP 5:  SECUREL Y assemble the bottom of the ten WEIGHT HORNS (15) to the REAR UPRIGHTS (14) using ten 3/8 x 4- 1/2” BOL TS (16), ten BACKING DOME W ASHERS (4), twenty 3/8” FLA T WASHERS (17), and ten 3/8” LOCK NUTS (18).  SECUREL Y assemble the top of the WEIGHT HORNS (15) to the REAR UPRIGHTS (14) using ten 1/2 X 4-1/2” BOL TS ( ...

  • Life Fitness Heavy Duty Multi Rack - page 14

    14 STEP 6:  Assemble the SHORT BENCH LOCK (19) to the REAR CROSS BRACE (9) using two 1/2 X 3-1/2” BOL TS (20), two BACKING DOME W ASHERS (4), two 1/2” INT LOCK W ASHERS (5), and two 1/2” LOCK NUTS (6).  Insert the LEFT BAR SUPPORT (21) into the desired slots of the FRONT LEFT UPRIGHT (1), and allow it to drop down to lock in place.  ...

  • Life Fitness Heavy Duty Multi Rack - page 15

    15 STEP 7:  S potter Platform accessories are available for the HDMR8.  Assemble each S potter Platform (A) to the FRONT LEFT & RIGHT UPRIGHTS (1 & 7) using two BOL TS (B), two DOME W ASHERS (C), two SP ACERS (D), one WEAR PLA TE (E), two FLA T W ASHERS (F), and two NUTS (G) as shown in the illustration. NOTE: All necessary hardware f ...

  • Life Fitness Heavy Duty Multi Rack - page 16

    16 Clean: • Hand grips with mild soap and water . • Frame damage can be repaired with touch-up p aint can be purchased from your Hammer Strength customer service represent ative. Inspect: • Hardware should be checked for looseness. T ighten as required. • Frames should be inspected for wear or damage. • Hand Grips should be checked for we ...

Manufacturer Life Fitness Category Home Gym

Documents that we receive from a manufacturer of a Life Fitness Heavy Duty Multi Rack can be divided into several groups. They are, among others:
- Life Fitness technical drawings
- Heavy Duty Multi Rack manuals
- Life Fitness product data sheets
- information booklets
- or energy labels Life Fitness Heavy Duty Multi Rack
All of them are important, but the most important information from the point of view of use of the device are in the user manual Life Fitness Heavy Duty Multi Rack.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Life Fitness Heavy Duty Multi Rack, service manual, brief instructions and user manuals Life Fitness Heavy Duty Multi Rack. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Life Fitness Heavy Duty Multi Rack.

A complete manual for the device Life Fitness Heavy Duty Multi Rack, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Life Fitness Heavy Duty Multi Rack by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Life Fitness Heavy Duty Multi Rack.

A complete Life Fitness manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Life Fitness Heavy Duty Multi Rack - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Life Fitness Heavy Duty Multi Rack, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Life Fitness Heavy Duty Multi Rack, that we can find in the current document
3. Tips how to use the basic functions of the device Life Fitness Heavy Duty Multi Rack - which should help us in our first steps of using Life Fitness Heavy Duty Multi Rack
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Life Fitness Heavy Duty Multi Rack
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Life Fitness Heavy Duty Multi Rack in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Life Fitness Heavy Duty Multi Rack?

Use the form below

If you did not solve your problem by using a manual Life Fitness Heavy Duty Multi Rack, ask a question using the form below. If a user had a similar problem with Life Fitness Heavy Duty Multi Rack it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)