English dropdown-ico

Manual Meyer Sound PSW-2

12 pages 0.38 mb
Download

Go to site of 12

Summary
  • Meyer Sound PSW-2 - page 1

    Operating Instructions PSW -2 Patents Pending Self-Powered Subwoofer Copyright © 1997, Meyer Sound Laboratories, Inc. All rights reserved Part #: 05.047.033.01 Rev A ...

  • Meyer Sound PSW-2 - page 2

    2 According to ISO/IEC Guide and EN 45014 The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC. declares that the product: The Manufacturer: Product Name : PSW-2 Product Options : All Name : Meyer Sound Laboratories Address : 2832 San Pablo Avenue Berkeley, California 94702-2204 ...

  • Meyer Sound PSW-2 - page 3

    3 Introduction The Meyer PSW -2 self-powered subwoofer contains independent amplifier and control electr onics for two 15” drivers in a compact enclosure. The PSW -2 has the following acoustical specifications: Frequency Response ± 4 dB 35 – 120 Hz Dynamic Range > 110 dB Phase Response ± 30 ° 50 – 145 Hz The PSW -2 is identical i n size ...

  • Meyer Sound PSW-2 - page 4

    4 Current Requirements The PSW -2 presents a dynamic load to the AC mains which causes the amount of current to fluctuate between quiet and loud operating levels. Since differ ent types of cables and circuit br eakers heat up (and trip) at varying rates, it is essential to understand the types of current ratings and how they corr espond to circuit ...

  • Meyer Sound PSW-2 - page 5

    5 Power Connector Wiring Conventions Use the following AC cable wiring diagram to create international or special-purpose power connectors: brown = hot blue = neutral yellow/green = earth ground (chassis) AC cable color code If the colors referr ed to in the diagram don't correspond to the terminals in your plug, use the following guidelines: ...

  • Meyer Sound PSW-2 - page 6

    6 The PSW -2 performs within its acoustical specifications and operates at a normal temperature if the TPL LED is on for no longer than two seconds, and off for at least one second. If the LED remains on for longer than thr ee seconds, the PSW -2 is hard limiting with these negative consequences: • Increasing the input level will not incr ease th ...

  • Meyer Sound PSW-2 - page 7

    7 Rigging The PSW -2 weighs 162 lb (73.5 kg). The maximum rec- ommended load for a single cabinet with aircraft pan fittings is 600 lb (273kg). This working load is based on a 5:1 safety factor . The PSW -2 has six rigging brackets (three on top and bottom). E ach bracket is capable of supporting the full working load of the cabinet. There ar e fou ...

  • Meyer Sound PSW-2 - page 8

    8 Placement One of the most important factors governing subwoofer response is their placement r elative to adjacent surfaces. Subwoofers gain significant power by coupling, or loading , with nearby floors and walls. Half-space loading describes a speaker coupling with one surface. Subs placed on the floor benefit from half-space loading, while flow ...

  • Meyer Sound PSW-2 - page 9

    9 PSW-2 and MSL-4 The PSW -2 is compatible with the MSL-4, CQ, and MTS-4. However , since the LF (low frequency) response for each speaker overlaps with the PSW -2, the system frequency response exhibits a rise in the range 65– 120 Hz (MSL-4), 40–120 Hz (CQ), and 30–120 Hz (MTS-4). It is important to emphasize that the speakers are in phase i ...

  • Meyer Sound PSW-2 - page 10

    10 Driver T roubleshooting The Remote Monitoring System (RMS) is the best method to query the status of the drivers in a system before and during the performance. RMS monitors peak power , peak voltage, and average voltage (VU) for each amplifier channel, allowing immediate detection and muting for drivers with open or shorted voice coils, with min ...

  • Meyer Sound PSW-2 - page 11

    11 Safety Summary ! • To reduce the risk of electric shock, disconnect the loud- speaker from the AC mains before installing audio cable. Reconnect the power cord only after making all signal connections. • Connect the loudspeaker to a two-pole, three wire ground- ing mains receptacle. The receptacle must be connected to a fuse or circuit break ...

  • Meyer Sound PSW-2 - page 12

    12 Controls and Connectors European User Panel with IEC 309 connector U U L L C C U U L L ®® LISTED 3K59 COMMERCIAL AUDIO SYSTEM ATENCIÓN : ACCESO INTERN O A PERSONAL TÉCNICO CALIFIC A ACHTUNG : GEHÄUSE NICH WARTUNG UND REPARATUR ELEKTROFACHKRÄFTE ATTENTION : ENTRETIEN E INTERNES NE SONT AUTORISEE TECHNIQUE QUALIFIÉ UK WARNING : THIS APPARA ...

Manufacturer Meyer Sound Category Speaker

Documents that we receive from a manufacturer of a Meyer Sound PSW-2 can be divided into several groups. They are, among others:
- Meyer Sound technical drawings
- PSW-2 manuals
- Meyer Sound product data sheets
- information booklets
- or energy labels Meyer Sound PSW-2
All of them are important, but the most important information from the point of view of use of the device are in the user manual Meyer Sound PSW-2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Meyer Sound PSW-2, service manual, brief instructions and user manuals Meyer Sound PSW-2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Meyer Sound PSW-2.

Similar manuals

A complete manual for the device Meyer Sound PSW-2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Meyer Sound PSW-2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Meyer Sound PSW-2.

A complete Meyer Sound manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Meyer Sound PSW-2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Meyer Sound PSW-2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Meyer Sound PSW-2, that we can find in the current document
3. Tips how to use the basic functions of the device Meyer Sound PSW-2 - which should help us in our first steps of using Meyer Sound PSW-2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Meyer Sound PSW-2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Meyer Sound PSW-2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Meyer Sound PSW-2?

Use the form below

If you did not solve your problem by using a manual Meyer Sound PSW-2, ask a question using the form below. If a user had a similar problem with Meyer Sound PSW-2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)