English dropdown-ico

Manual Blueant SuperTooth II

73 pages 1.02 mb
Download

Go to site of 73

Summary
  • Blueant SuperTooth II - page 1

    ...

  • Blueant SuperTooth II - page 2

    OVERVIEW The SuperTooth II is equipped with Bluetooth Technology and a Digital Signal Processor which allow wireless communica tions on devices such as Mobile phones, Smartphones and PDA’s. It is designed to be a totally portable wireless handsfree kit which will enable the user to communicate freely without holding a phone. The S upertooth II wi ...

  • Blueant SuperTooth II - page 3

    CONTENTS OVERVIEW ..................................................................................................... 2 CONTENTS .................................................................................................... 3 GETTING STA RTED ..................................................................................... 4 VEHICLE PLA ...

  • Blueant SuperTooth II - page 4

    GETTING STARTED VEHICLE PLACEMENT The optimum place to position the Supertooth II in the vehicle is on the sun visor. The Supertooth II sun visor clip is designed to be re versible to easily transfer the Handsfree Kit in case you change the position of the sun visor. Fix the me tal clip of S uperToot h II to the sun visor. Sun Visor Fixing the Clip ...

  • Blueant SuperTooth II - page 5

    CHARGING THE SUPERTOOTH II SuperTooth II can be charged in a car using the SuperTooth II Ca r Charger or a t home using the Wall charger. 1. Connect the charger’s plug into the Charger Input of SUPERTOOT H II. Charge Ind icator Status: • Red = Low battery • Steady Green = Fully charged • Alternate Red/Green = indicates charging 2. When full ...

  • Blueant SuperTooth II - page 6

    BLUETOOTH P AIRING PROFILES IMPORTAN T NOTICE!!! You must establish the correct Bluetooth Pairing Mode for your mobile phone before connecting. If your handset is not listed on the next page, look in your phones manual to find the right Bluetooth Profile to use. Alternatively, call the Blueant Customer Support Team or visit www.blueant.com.au for m ...

  • Blueant SuperTooth II - page 7

    SUPERTOOTH II COMPATIBILITY Required Profile Phone models Headset Hands free BlackBerry 7100v / 7100g / 7 290 / 7250  I-Mate PDA2K / PDA2K EV-DO / SP3 / SP3i  I-Mate Jam / Pocket Pc / Smartphone 2 /  HP IPAQ 6315 / 6365 / 6385  MOTOROLA A1000 / E1000 / A925 / A835 / E398 / MPX220 / MPX / V3 / V80 / V60 0 / V6 20 / V525 / V535  Nokia ...

  • Blueant SuperTooth II - page 8

    EXAMPLE PROCEDURE FOR PAIRING TO A MOBILE PHONE • Pairing to your phone is not possible while charging the Supertooth. • First, refer to the Compatibility Table above for suggeste d pairing modes to deter mine w hat pairing mode is be st for your phone. • Pairing will create a link or connecti on between the two Bluetooth devices, SuperTooth ...

  • Blueant SuperTooth II - page 9

    HANDSFREE pairing: (Example) 1. Bring the mobile phone to about 20cm from SuperTooth II. 2. The Supertooth I I is initially off. Turn it on by flipping up the Sw i vel Arm to the 55º position. The Bluetooth Ind icator will glow (blue blink). 3. Simultaneously press the Reject Button and the Pick-Up/Hang- Up Button f or about 10 seconds. A distinct ...

  • Blueant SuperTooth II - page 10

    HEADSET Pairing: (Exa mple) 1. Bring the mobile phone to about 20cm from the Su pertooth II. 2. SuperTooth II is initially off. Turn it on by flipping up the Sw ivel Arm to 55º position. The Bluet ooth Indicator will glow (blue blink). 3. Simultaneously press the Reject Button and Pick- Up/Hang-Up B utton for abo ut 10seconds. A distinctive tone w ...

  • Blueant SuperTooth II - page 11

    Note: If pairing has failed, repeat t he pr ocedure. If pairing succeeded, then your SuperTooth II kit is now ready to us e. You can now make or ans wer a call using your kit instead of your phone. Important Re marks: • On some versions of Nokia , Motorola, Sony Ericsson and Sharp phone so ftware, the kit will not connect au tomatically to the ce ...

  • Blueant SuperTooth II - page 12

    MAKING/RECEIVING CALLS AN S W E R I N G A C AL L When the phone receives a call, a ring ton e is heard on SuperToo th II and at the same time on the telephone (depe nding on your phone model). 1. Shortly press the Pick-Up/Hang-Up Bu tton to an swer the call. 2. When communication is over, press the Pick-Up/ Hang-Up But ton to terminate the call. MA ...

  • Blueant SuperTooth II - page 13

    Redialing (Han dsfree profile only) Make a long press on the Pick-Up/ Hang-U p Button . Audio will be on the Supertooth II. Audio Transfer Kit to Phone Flip down the Swiv el A rm to 0º position (or turn-off the unit). This will automatically transfer the audio from the kit to t he phone. Phone to Kit For Nokia Phones: Flip up the Sw ivel Arm from ...

  • Blueant SuperTooth II - page 14

    VOLUME LEVELS – Finding The Right Balance 1) The Supertoot h II has a very powerful speaker that is designed to boost low level voice signals if required. Use the Volume Control Knob to turn down levels if too much signal is present and distortion or echo occurs . The Supertooth II sounds best when it is loud enough to cut through to be heard wit ...

  • Blueant SuperTooth II - page 15

    MANUALS FOR INDIVIDUAL MOBILE PHONES If your phone doe s not appear below , please u se a manual fo r a similar phone or use the Ex ample Pairing procedure above. Al so chec k the w ebsite for newly updated models and also for older outdated mo dels. www.blueant.com .au BLACKBERRY 7100 v / 7100g / 7290 / 7250 ....................................... ...

  • Blueant SuperTooth II - page 16

    BLACKBERRY 7100v / 7100g / 7290 / 7250 Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest ver sion. You may need to register your de vice to download upda tes. For Blackberr y go to w ww.blackbe rry.c om a. ACTIVATING THE BLUETOOTH You must activ at ...

  • Blueant SuperTooth II - page 17

    2. When answering is done on the phone, ongoing call w ill be heard on the p hone (not on the Supe rtooth) . But i f you w ish to hear and transfer the audio to the Supertooth, j ust press the Pick-Up/Han g-Up button on ce o n the Supertooth . 3. To terminate th e ca ll, press dow n the P ick-Up/Hang-Up B utton. e. MAKING A CALL with the Supertooth ...

  • Blueant SuperTooth II - page 18

    IMATE POCKET PC / JAM Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant si te to check you ha ve the latest version. You will need to register your de vice to download upda tes. For Imate go to www.clubimate .com a. ACTIVATING THE BLUETOOTH You must activ ate the Bluetooth fea ture ...

  • Blueant SuperTooth II - page 19

    d. MAKING A CALL with the Handsfr ee Ki t on Normal diali ng With your Imate you can make a call using different methods. Please re fer to y our PC Phone’s User Guide. The most direct method is by using the Phone key pad. 1. Press button to brin g up the dialer scre en. 2. Tap the number on the keypad, and then tap Talk key. Note: Audio will be h ...

  • Blueant SuperTooth II - page 20

    IMATE PDA2k / PDA2K EV-DO Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant si te to check you ha ve the latest version. You will need to register your de vice to download upda tes. For Imate go to www.clubimate .com a. ACTIVATING THE BLUETOOTH You must activ ate the Blue tooth fea ...

  • Blueant SuperTooth II - page 21

    d. MAKING A CALL with the Supertooth on Normal diali ng With your Device you can make a call using di fferent methods. Plea se refer to y our PC Phone’s User Guide. The most direct method is by using the Phone key pad. 1. Press button to brin g up the dialer scre en. 2. Tap the number on the keypad, and then tap Talk key on your phone . Note: Aud ...

  • Blueant SuperTooth II - page 22

    IMATE SP3/SP3i Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant si te to check you ha ve the latest version. You will need to register your de vice to download upda tes. For Imate go t o www.cl ubimate.com a. ACTIVATING THE BLUETOOTH You must activ ate the Blue tooth featu re of y ...

  • Blueant SuperTooth II - page 23

    d. MAKING A CALL Normal diali ng With your Phone you can make a call using differen t methods. Please refer to y our PC Phone’s User Guide. The most direct method is by using the Phone key pad. 1. Tap the number on the phone’s keypad, and then press the Talk key on the phone. Note: Audio will be heard directly on the Supertoo th. At times, for ...

  • Blueant SuperTooth II - page 24

    I-MATE SMARTPHONE 2 Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant si te to check you ha ve the latest version. You will need to register your de vice to download upda tes. For Smartphone 2 go to www.clubimate.com a. A CTIV ATING THE BLUETOOTH You must activ ate the Blu etooth f ...

  • Blueant SuperTooth II - page 25

    d. MAKING A CALL with the Handsfr ee Ki t on N ormal dia ling With your Smartph one2 you can make a cal l using different me thods. Please refer to your PC Phone’s U ser Guide . The most direct method is by using the Phone key pad. 1. Press button to brin g up the dialer scre en. 2. Tap the number in to the key pad, and then tap Talk key. Note: A ...

  • Blueant SuperTooth II - page 26

    HP IPAQ 6315 / 6365 / 6385 Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest ver sion. You may need to register your de vice to download upda tes. For Hp 6365 go to www.hp.com.au a. ACTIVATING THE BLUETOOTH You must activ ate the Blue tooth featu r ...

  • Blueant SuperTooth II - page 27

    d. MAKING A CALL with the Supertooth on Normal diali ng With your Device you can make a call using di fferent methods. Plea se refer to y our PC Phone’s User Guide. The most direct method is by using the Phone key pad. 3. Press button to brin g up the dialer scre en. 4. Tap the number on the keypad, and then tap Talk key on the phone. Note: Audio ...

  • Blueant SuperTooth II - page 28

    MOTOROLA A10 00 / A925 / A835 a. ACTIVATING THE BLUETOOTH You must activ ate the Bluetooth featu re of y our cell phone to establish a Blu etooth conne ction between y our mobile phone and o ther Bluetoo th dev ices. 1. Tap Menu icon at top right of screen. Tap Control Panel, Tap Conne ctions , Tap Bluetooth. Tap Settings. For Operation Mode select ...

  • Blueant SuperTooth II - page 29

    Flip down the Sw i ve l Ar m to 0º position (or turn-o ff the un it). This will automatica lly tran sfer the audio from the kit to the phone. Phone to Kit Flip the Sw ivel Ar m up fr om 0º to 5 5ºor 210º po sition (Turn-On the Kit). Then press shortly the Pick-Up/Hang-Up Button. The audio will be transferred from the phone to the kit.” f. REJ ...

  • Blueant SuperTooth II - page 30

    MOTOROLA V3 / V80 / V525 / V535 / V600 / V620 / E398 a. ACTIVATING THE BLUETOOTH You must activ ate the Bluetooth featu re of y our cell phone to establish a Blu etooth conne ction between y our mobile phone and o ther Bluetoo th dev ices. 1. Press Menu key featured as or press on the center button of the 5- Way NavigationKey featured as to access ...

  • Blueant SuperTooth II - page 31

    Voice d ialing Refer to step h and i for th e procedure when activ ating and re cording for voice dialing . 1. Press the Pick-U p/Hang-Up Button on ce to activ ate the voice dialing . 2. A beep will th en be heard on the Hand sfree Kit pr ompting the u ser to say the name of the per son to call. 3. Say the name. The name will be played back to you. ...

  • Blueant SuperTooth II - page 32

    5-Way Navigation Ke y featured as to access Menu. Scroll to Phonebook, SELECT . 2. Choose a con tact that you w ant to make a voice dial to, then press . C hoose Edit, then press SELE CT. 3. On the Entry D etails, choose “…MORE…” and press SE LECT. 4. On the Add New , choose Phone Number , SELECT. Thi s is highligh ted, “No.:_______” . ...

  • Blueant SuperTooth II - page 33

    NOKIA 6255/ 6230/6820/66 50/6310/631 0 i a. A CTIV ATING THE BLUETOOTH You must activ ate the Bluetooth featu re of y our cell phone to establish a Blu etooth conne ction between y our mobile phone and o ther Bluetoo th dev ices. 1. Press Menu and select Settings , Connectivity and Bluetooth . (For 6310 Press Menu and select Bluetoot h) 2. Select B ...

  • Blueant SuperTooth II - page 34

    d. A NSWERING/R ECEIVIN G A CA LL When the phone is receiving a call, same ring tone w ill be heard simultaneously on the Handsfree Kit as w ell as on the phone. 1. Press once on the Pick-Up/H ang-Up Butto n to answer the call. 2. End the call by pre ssing the Pick-Up /Hang-Up Button . Note: Cell phone b uttons can al so be used to an swer a call b ...

  • Blueant SuperTooth II - page 35

    i. RECORDING FOR VOICE DI ALING Use your phone w hen recording voice dialing. 1. Press Menu and select Contacts and Search. 2. Choose the name w hich you w ant to make a voice di al then pres s Details . 3. Press Options and se le ct Add voice tag . Follow the instr uctions that are displayed . Your vo ice will then be saved on the p hone after i t ...

  • Blueant SuperTooth II - page 36

    NOKIA 3230/ 6260/6600/66 70/7610/365 0 a. A CTIV ATING THE BLUETOOTH You must activ ate the Bluetooth featu re of y our cell phone to establish a Blu etooth conne ction between y our mobile phone and o ther Bluetoo th dev ices. 1. Press the Menu key . Using the joystick, s croll to Connect, press to sel ect . A list o f options will be displ ayed. ...

  • Blueant SuperTooth II - page 37

    d. A NSWERING/R ECEIVIN G A C ALL When the phone is receiv ing a call, a ri ng tone w ill be heard on the Handsfr ee Kit as w ell as on the phone. 1. Press the Pick-Up/ Hang-Up Bu tton on ce to answ er the call. 2. End the call by pre ssing the Pick-Up /Hang-Up Button . Note: Cell phone b uttons can al so be used to an swer a call bu t audio will s ...

  • Blueant SuperTooth II - page 38

    i. SETTING THE VOLUME Setting the v olume can be d one during cal ls or ev ery time a key is pressed on y our cell phone. 1. Turn it clockw ise to inc rease the vo lume. 2. Decrease the v olume by turning it counter- clockw ise. Note: If the volume is too high, it can ca use feedba ck (whistling sound), ec ho or background noise during calls. It i ...

  • Blueant SuperTooth II - page 39

    NOKIA 9500 / 9300 Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest ver sion. You may need to register your de vice to download upda tes. For Nokia 9500 go to www.nokia.com.au a. ACTIVATING THE BLUETOOTH You must activ ate the Blue tooth featu re o ...

  • Blueant SuperTooth II - page 40

    d. MAKING A CALL Normal diali ng With your Phone you can make a call using differen t methods. Please refer to y our PC Phone’s User Guide. The most direct method is by using the Phone key pad. 1. Tap the number o n the phone’s key pad, and then press the Talk key on the phone. Note: Audio will be heard directly on the Supertoo th. At times, fo ...

  • Blueant SuperTooth II - page 41

    NOKIA WIRE LESS AUDIO ADAPTER AD-5 B The Nokia Bluetooth adapter supports Blue tooth Headset Profile only, Therefore the Supe rtooth needs to be placed into Head set Pairing Mode first. a. PA IRING TO THE CELLUL AR PHONE 1. The Supertoo th II is initially off. Turn it on by flippin g up th e S wi vel Arm to the 55º position. The Bluetooth Indicato ...

  • Blueant SuperTooth II - page 42

    Note: Audio will be heard directly on the Handsfree Kit. At times, for first ti me dialing, audio will be heard on the phone and not immediatel y on the Handsfree Kit. If this i s the case you ha ve to press once on the Send Butto n to transfer th e audio to the Ki t. 2. To terminate th e ca ll, pre ss down the Pick-Up/Hang-Up Bu tton. d. AUDIO TRA ...

  • Blueant SuperTooth II - page 43

    02 XDA11s Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant si te to check you ha ve the latest version. You will need to register your de vice to download upda tes. For Xda11s go to www.seeo2.com a. ACTIVATING THE BLUETOOTH You must activ ate the Blue tooth featu re of y our devic ...

  • Blueant SuperTooth II - page 44

    d. MAKING A CALL with the Supertooth on Normal diali ng With your Device you can make a call using di fferent methods. Plea se refer to y our PC Phone’s User Guide. The most direct method is by using the Phone key pad. 1. Press button to brin g up the dialer scre en. 2. Tap the number on the keypad, and then tap Talk key on the phone. Note: Audio ...

  • Blueant SuperTooth II - page 45

    O2 XPHONE2 Note: Please make sure yo u have the late st firmware upgrade for your phone. Go to the support se ction of the following websi te to check you have th e late st version. You will need to register your devi ce to download upda tes. For Xphone2 go to www.seeo2.com a. ACTIVATING THE BLUETOOTH You must activ ate the Blue tooth featu re of y ...

  • Blueant SuperTooth II - page 46

    d. MAKING A CALL Normal diali ng With your Phone you can make a call using differen t methods. Please refer to y our PC Phone’s User Guide. The most direct method is by using the Phone key pad. 1. Tap the number o n the phone’s key pad, and then press the Talk key on the phone. Note: Audio will be heard directly on the Supertoo th. At times, fo ...

  • Blueant SuperTooth II - page 47

    O2 XDA11 / XDA MINI Note: Please make sure you ha ve the latest firm ware up grade for your Phone. Go to the suppor t section of the relevant site to che c k yo u have the la test version . You will need to regi ster your device to download update s. For XDAII go to www.seeo2.com a. ACTIVATING THE BLUETOOTH You must activ ate the Bluetoot h feature ...

  • Blueant SuperTooth II - page 48

    d. MAKING A CALL with the Handsfr ee Ki t on Normal diali ng With your XDA II you can make a call using di fferent methods. Please re fer to y our PC Phone’s User Guide. The most direct method is by using the Phone key pad. 1. Press button to brin g up the dialer scre en. 2. Tap the number on the keypad, and then tap Talk key. Note: Audio will be ...

  • Blueant SuperTooth II - page 49

    02 XPHONE Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant si te to check you ha ve the latest version. You will need to register your de vice to download upda tes. For Xphone go to www.seeo2.com a. A CTIV ATING THE BLUETOOTH You must activ ate the Blue tooth featu re of your Xpho ...

  • Blueant SuperTooth II - page 50

    1. Press button to brin g up the dialer scre en. 2. Tap the number in to the key pad, and then tap Talk key. Note: Audio will be heard directly on the Handsfree Kit. At times, for first time dialing, audio will be heard on the phone and not immediatel y on the Handsfree Kit. If this i s the case you ha ve to press once on the Send Butto n to transf ...

  • Blueant SuperTooth II - page 51

    PALM TREO 650 Note: Please make sure yo u have the late st firmware upgrade for your phone. Go to the support section of the following website to che ck you have the late st ver sion. You will need to register your de vice to download upda tes. For Treo 650 go to www.palmone.com/au a. ACTIVATING THE BLUETOOTH You must activ ate the Blue tooth featu ...

  • Blueant SuperTooth II - page 52

    The most direct method is by using the Phone key pad. 4. Tap the number o n the phone ’s keypad, and then pre ss the DI AL key on the phone. Note: Audio will be heard directly on the Supertoo th. At times, for first time dialing, audio will be heard on the phone and n ot immediatel y on the Supertoo th. If thi s is the case yo u have to pre ss on ...

  • Blueant SuperTooth II - page 53

    PANASONIC P342i / X700 / X70 a. A CTIV ATING THE BLUETOOTH You must activ ate the Bluetooth featu re of y our cell phone to establish a Blu etooth conne ction between y our mobile phone and o ther Bluetoo th dev ices. 1. Go to M enu by pressing the ce nter button of the 5-w ay nav igation key fea tured as . 2. (For X70 scroll to Organizer then) S c ...

  • Blueant SuperTooth II - page 54

    the voice diali ng. 2. Beep will then be heard on the Super tooth prompting the user to say the nam e of the pe rson to cal l. 3. Say the name. The name will be played back to you. The phone w ill then place the call automatically . In case the cell phone does no t recognize the name spo ken, the steps above may be repeated . 4. Press the Pick-U p/ ...

  • Blueant SuperTooth II - page 55

    6. Follow the instructi ons on the screen. Voice is then saved on the phone. Under Voice Dial list, the name which alr eady has a v oice command appears. 7. Continue pressing to exit. Note: Noisy environ ment may affect voic e recognition. Record your voice in a quiet enviro nment. 55 ...

  • Blueant SuperTooth II - page 56

    SHARP GX30/GX32/GX15/GX25 a. A CTIV ATING THE BLUETOOTH You must activ ate the Bluetooth featu re of y our cell phone to establish a Blu etooth conne ction between y our mobile phone and o ther Bluetoo th dev ices. 1. Press to display Main Menu. 2. Highlight Setti ngs , and then press to select. 3. Select Connectivity, Bluetooth , Bluetooth On/Off ...

  • Blueant SuperTooth II - page 57

    e. AUDIO TRAN SFER Audio Transfer can be done by accessi ng the cell phone’ s Menu during ong oing calls. Kit to Phone Flip down the Swiv el Arm to 0º po sition (or turn-o ff the un it). Thi s will automatically transfer the audio fro m the kit to the pho ne. Phone to Kit Flip the Swivel Arm up from 0 º to 55ºor 210º position (Turn-On the Ki ...

  • Blueant SuperTooth II - page 58

    SIEMENS S65 / S55 a. A CTIV ATING THE BLUETOOTH You must activ ate the Bluetooth featu re of y our cell phone to establish a Blu etooth conne ction between y our mobile phone and o ther Bluetoo th dev ices. 1. Press Menu button. S croll to Setup , SELECT. Choo se Connectivity , SELE CT. 2. Scroll to Bluetooth , CHANGE. The ph one is now connecting ...

  • Blueant SuperTooth II - page 59

    2. A beep will th en be heard on the Hand sfree Kit pr ompting the u ser to say the name of the per son to call. 3. Say the name. The name will be played back to you. The phone w ill then place the call automatically. In case the cellular phone does not recognize the name spoken, the steps ab ove may be repeated. 4. Press the Pick-U p/Hang-Up Butto ...

  • Blueant SuperTooth II - page 60

    SIEMENS SX1 a. A CTIV ATING THE BLUETOOTH You must activate the Bluetoo th feature of your mobile phone to establish Blueto oth connection b etween it and other Blue tooth dev ices. 1. Press Menu key Setup Bluetooth . 2. is highlighted . Pres s Options Change . 3. Choose On and press Ok . 4. Continue pre ssing un til you finall y Ex it. b. PAIRING ...

  • Blueant SuperTooth II - page 61

    c. AU T O ACC E P T M O D E 1. Press Menu k ey Setup Bluetooth . 2. is highlighted . 3. Sway the joy stick t o the rig ht to view Paired devi ces w indow . 4. Choose the name of this hands-free kit and press Options Set as authorised . 5. A statement “Connections will take place without confi rmation. Continue?” appears. Press Yes . 6. Continue ...

  • Blueant SuperTooth II - page 62

    i. RECORDING FOR VOICE DI ALING Note:Voice dialing entries must be stored in the phone’s memory (not on the SIM card!). 1. Press Menu Key Contacts . 2. Choose and Open an en try y ou want to make a voice dial . 3. Under the selected entry , high light the phone number and press Options Add voi ce tag. 4. Follow the instructions di splayed on scre ...

  • Blueant SuperTooth II - page 63

    SONY ERICSSON K700i / S700i / Z1010 / Z600 / T610 / T628 / T630 a. A CTIV ATING THE BLUETOOTH You must activ ate the Blue tooth featu re of your phone to establi sh a Bluetooth connection between y our cell phone and other Blu etooth dev ices. 1. Press to a cces s Main M enu. 2. Scroll to Conn ectivity , Select . Bluetooth , Select . Turn On , Sele ...

  • Blueant SuperTooth II - page 64

    d. MAKING A CALL with the Handsfr ee Ki t on Normal diali ng 1. Enter th e contact n umber and pres s Call key. Audio will be heard on the Hand sfree Kit. 2. Shortly pre ss the Pick-Up/Hang-Up Button to terminate the cal l. Voice dialing Make a call by saying a v oice name/v oice tag. But first, refer to step i and j for the p rocedure w hen activ ...

  • Blueant SuperTooth II - page 65

    j. RECORDING FOR VOICE DI ALING Note:Voice dialing entries must be stored in the phone’s memory (not on the SIM card!). 1. Press to access Main Menu. Scro ll to Settings and press Select . Choose Voice control , Select . Voice dialing , Sel ect . Edit names , Select . New voice , Add . (Cont acts list will appear). 2. Choose among the contacts wh ...

  • Blueant SuperTooth II - page 66

    SONY ERICSSON P800 / P900 / P910 a. ACTIVATING THE BLUETOOTH You must activ ate the Bluetooth featu re of y our cell phone to establish a Blu etooth conne ction between y our mobile phone and o ther Bluetoo th dev ices. 1. Flip to open mode. On the phone’s Application s window , scroll to Control Panel and tap it using the “ stylu s” . On the ...

  • Blueant SuperTooth II - page 67

    Voice dialing Refer to step g and h for th e procedure when activ ating and re cording for v oice dialing. 1. Press the Pick-U p/Hang-Up Button on ce to activate the voice dialing. 2. A beep will th en be heard on the Hand sfree Kit pr ompting the u ser to say the name of the per son to call. 3. Say the name. The name will be played back to you. Th ...

  • Blueant SuperTooth II - page 68

    FREQUENTLY ASKED QUESTIONS (FAQ) 1. Am I using the correct pairing Mode accordin g to m y phone? 2. Why won’t my Supertooth II won’t go into Pairing mode? 3. Is my Supertooth II Charged? 4. Why will my Supertooth II not conn ect when turned on or comes into range (10m)? 5. Why can’t I hear any sound fr om the Speaker? 6. Why is the Supertooth ...

  • Blueant SuperTooth II - page 69

    4. Why will my Supertooth II not conne ct wh en turned on or comes into range (10m)? • Make sure you ar e using the co rrect profile for your phone, Headset or Handsfree. • Some phones will not connect to Supertooth II immediately when in range and require t he user to press the Pick -Up/Han g-Up key on the Supertooth II once, to establish conn ...

  • Blueant SuperTooth II - page 70

    Contact Us: For Connection Assistan ce or if y ou are having difficulties using your Supertooth II, please make an enquiry to support@ blueant.com.au or on our website www.blueant.com.au or call us on 1300 669 049 (AUS) 0800 443 122 (NZ) BlueAnt Warranty Process 1. Should you be having difficulties in t he operation of your Supertooth II please ref ...

  • Blueant SuperTooth II - page 71

    Warranty Terms and Conditions 1. Blueant Warrant the original pur chaser of this prod uct only. 2. Blueant will replace or repair any fault y product provided it has not been misused or abused in any way. 3. There are no user serviceable part s inside this product. Using a non-authorized repairer will void the warranty. 4. Supertooth II Warrant y i ...

  • Blueant SuperTooth II - page 72

    Specifications : Bluetooth Standard ............................... Bluetooth V1.1, Class II Frequency ............................................. 2.4GHz Maximum communication distance....... Approx. 10m Operating Talk Time ............................. 20 hours Operating Standby Time ....................... 800 hours Charging Time .............. ...

  • Blueant SuperTooth II - page 73

    www.blueant.com.au PH: 1300 669 049 (AUS) PH: 0800 443 122 (NZ) 73 ...

Manufacturer Blueant Category Bluetooth Headset

Documents that we receive from a manufacturer of a Blueant SuperTooth II can be divided into several groups. They are, among others:
- Blueant technical drawings
- SuperTooth II manuals
- Blueant product data sheets
- information booklets
- or energy labels Blueant SuperTooth II
All of them are important, but the most important information from the point of view of use of the device are in the user manual Blueant SuperTooth II.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Blueant SuperTooth II, service manual, brief instructions and user manuals Blueant SuperTooth II. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Blueant SuperTooth II.

Similar manuals

A complete manual for the device Blueant SuperTooth II, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Blueant SuperTooth II by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Blueant SuperTooth II.

A complete Blueant manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Blueant SuperTooth II - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Blueant SuperTooth II, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Blueant SuperTooth II, that we can find in the current document
3. Tips how to use the basic functions of the device Blueant SuperTooth II - which should help us in our first steps of using Blueant SuperTooth II
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Blueant SuperTooth II
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Blueant SuperTooth II in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Blueant SuperTooth II?

Use the form below

If you did not solve your problem by using a manual Blueant SuperTooth II, ask a question using the form below. If a user had a similar problem with Blueant SuperTooth II it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)