English dropdown-ico

Manual Snapper R1962519B

24 pages 1.45 mb
Download

Go to site of 24

Summary
  • Snapper R1962519B - page 1

    Safety Instructions & Operator’s Manual for 19” STEEL DECK WALK MOWERS SERIES 19 MODEL R1962519B MODEL NUMBER EXPLANATION R 19 625 19 B MODEL DESIGNATION ENGINE TYPE CUTTING WIDTH SERIES DESIGNATION ENGINE POWER * R – Recycling Model 625 – 6.25 (Engine Pow er *) B – Briggs & Stratton Engine 19 – 19” Cutting Width 19 – Series ...

  • Snapper R1962519B - page 2

    2 IMPORTANT SAFETY INSTRUCTIONS WARNING: This pow erful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply w ith the follow ing SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these in ...

  • Snapper R1962519B - page 3

    3 IMPORTANT SAFETY INSTRUCTIONS SAFE HANDLING OF GASOLINE (Continued From Previous Page) 1. DO NOT remove fuel cap or add fuel w ith the engine running. Allow the engine to cool before refueling. 2. DO NOT refuel the machine indoors. 3. DO NOT store the machine or fuel container inside w here there is an open flame, spark or pilot light such as on ...

  • Snapper R1962519B - page 4

    4 IMPORTANT SAFETY INSTRUCTIONS MAINTENANCE AND STORAGE (Continued From Previous Page) 7. DO NOT change engine governor speed settings or overspeed engine. 8. Check grass bag assembly frequently for w ear or deterioration to avoid thrown objects and exposure to moving parts. Replace with new bag if loose seams or tears are evident. Replace slider o ...

  • Snapper R1962519B - page 5

    5 TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTION S ................................................ 2-4 TABLE OF CO NTENTS ............................................................................. 5 SECTION 1 - FAMI LIARIZAT ION .............................................................. 6 SECTION 2 - OPERATIN G INSTRUCTION S ............... ...

  • Snapper R1962519B - page 6

    6 Section 1 - FAMILIARIZATION FIGURE 1.1 1.1 INTRODUCTION This manual has been prepared for the operators of the SNAPPER WALK BEHIND MOWERS. Its purpose, aside from recommending operating and routine service requirements, is to promote safety through the use of accepted operating practices. Read, Understand and Follow the “IMPORTANT SAFETY INSTRU ...

  • Snapper R1962519B - page 7

    7 Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the following checks and perform the service required before each start-up. 2.1.1. Check guards, deflectors, grass bag, adapter and covers to make sure all are in place and securely tightened. 2.1.2. Check blade control to insure it works freely. See Figure 2.1. FIGURE 2.1 2.1.3. Ch ...

  • Snapper R1962519B - page 8

    8 Section 2 - OPERATING INSTRUCTIONS 2.3 STOPPING Stop engine and blade by releasing the blade control. See Figure 2.4. FIGURE 2.4 WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug w ire and secure aw ay from spark plug. Engine and components are HOT. Avoid ser ...

  • Snapper R1962519B - page 9

    9 Section 2 - OPERATING INSTRUCTIONS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug w ire and secure aw ay from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather glov es w hen ...

  • Snapper R1962519B - page 10

    10 Section 2 - OPERATING INSTRUCTIONS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug w ire and secure aw ay from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when ...

  • Snapper R1962519B - page 11

    11 Section 3 - MAINTENANCE 3.1 INTRODUCTION To retain the quality of the mower, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention model and serial number. 3.2 SERVICE - AFTER FIRST 5 HOURS 3.2.1. CHANGE ENGINE OIL WA ...

  • Snapper R1962519B - page 12

    12 Section 3 - MAINTENANCE 3.3 SERVICE - ANNUALLY Perform all maintenance as described in the “Service Schedule” section of this manual. 3.3.1. Engine Service engine according to engine owner’s manual. 3.3.2. Air Filter Refer to engine owner’s manual for service instructions. 3.3.3. Engine Oil Refer to engine owner’s manual for service in ...

  • Snapper R1962519B - page 13

    13 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug w ire and secure aw ay from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves w h ...

  • Snapper R1962519B - page 14

    14 TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Engine Will Not Start 1. Fuel tank empty. 1. Fill fuel tank with fresh fuel. Using Recoil Starter 2. Engine needs choking or priming. 2. Choke/Prime. Check Engine Manual for instruction. 3. Spark plug wire disconnected. 3. Place spark plug wire onto spark plug. 4. Spark plug faulty. 4. Rep ...

  • Snapper R1962519B - page 15

    15 SERVICE SCHEDULE ITEM SERVICE PERFORMED REF. EACH USE 5 HRS 25 HRS 50 HRS 100 HRS EACH SEASON Engine Oil Check Oil Level Page 7 X Initial Oil Change Page 11 X Periodic Oil Change Page 12 X* Air Cleaner Clean or Replace Engine Manual. X** Spark Plug Replace Engine Manual. X Mow er Blade Check For Wear, Damage & Replacement Page 11 & 13 X ...

  • Snapper R1962519B - page 16

    16 2 YEAR LIMITED WARRANTY For two (2) years from purchase date for the orig inal purchaser's residential, non-commercial use, SNAPPER , through any authorized SNAPPER dealer will replace, free of charge (except for taxes where applicable), any part or parts found upon examination by the factory at McDonough, Georgia, to be defective in materi ...

  • Snapper R1962519B - page 17

    17 PRIMARY MAINTENANCE ...

  • Snapper R1962519B - page 18

    18 PRIMARY MAINTENANCE ...

  • Snapper R1962519B - page 19

    19 PRIMARY MAINTENANCE ...

  • Snapper R1962519B - page 20

    20 PRIMARY MAINTENANCE ...

  • Snapper R1962519B - page 21

    21 SNAPPER  PRODUCT  REGISTRATION  FORM   IMPORTANT:  KEEP  THIS  INFORMATION  FOR  YOUR  PERSONAL  RECORDS  (Complete  the  following  information  on  your  Snapper  purchase)   Model  Number __________________________________________________________   Serial  Number __ ...

  • Snapper R1962519B - page 22

    22 NOTES ...

  • Snapper R1962519B - page 23

    23 NOTES ...

  • Snapper R1962519B - page 24

    24 Safety Instructions & Operator’s Manual for 19” STEEL DECK WALK BEHIND MOWERS SERIES 19 IMPORTANT Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contai n very important emissions information and critical safety warnings. Read, Unders ...

Manufacturer Snapper Category Lawn Mower

Documents that we receive from a manufacturer of a Snapper R1962519B can be divided into several groups. They are, among others:
- Snapper technical drawings
- R1962519B manuals
- Snapper product data sheets
- information booklets
- or energy labels Snapper R1962519B
All of them are important, but the most important information from the point of view of use of the device are in the user manual Snapper R1962519B.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Snapper R1962519B, service manual, brief instructions and user manuals Snapper R1962519B. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Snapper R1962519B.

Similar manuals

A complete manual for the device Snapper R1962519B, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Snapper R1962519B by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Snapper R1962519B.

A complete Snapper manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Snapper R1962519B - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Snapper R1962519B, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Snapper R1962519B, that we can find in the current document
3. Tips how to use the basic functions of the device Snapper R1962519B - which should help us in our first steps of using Snapper R1962519B
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Snapper R1962519B
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Snapper R1962519B in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Snapper R1962519B?

Use the form below

If you did not solve your problem by using a manual Snapper R1962519B, ask a question using the form below. If a user had a similar problem with Snapper R1962519B it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)