English dropdown-ico

Manual Ryobi RS290

14 pages 2.74 mb
Download

Go to site of 14

Summary
  • Ryobi RS290 - page 1

    OPERA TOR’S MANUAL RANDOM ORBIT SANDER DOUBLE INSULA TED RS290 SA VE THIS MANUAL FOR FUTURE REFERENCE Y our sander has been engineered and manufactured to our high standard for dependability , ease of operation, and operator safety . When properly car ed for , it will give you years of rugged, trouble-fr ee performance. WARNING: T o reduce the ri ...

  • Ryobi RS290 - page 2

    2  Introduction ..................................................................................................................................................................... 2   Warranty .................................................................................................................................................. ...

  • Ryobi RS290 - page 3

    3 GENERAL SAFETY RULES  Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.  Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.  D ...

  • Ryobi RS290 - page 4

    4 SERVICE  Have your power tool serviced by a qualified repair per son usi ng only ide ntic al rep lace men t part s. This will ensure that the safety of the power tool is maintained. WARNING! T o r educe the risk of injury , user must read instruction manual.  Wh en se rv ic in g a pow er to ol , use onl y id en ti cal rep la ce - me n ...

  • Ryobi RS290 - page 5

    5 SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the pr oduct better and safer . SYMBOL NAME DESIGNA TION/EXPLANA TION V V olts V oltage A Amperes Current Hz Hertz Frequency (cycles per second) W W att Power min Minutes Ti ...

  • Ryobi RS290 - page 6

    6 SYMBOLS SERVICE Servicing requir es extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to the nearest AUTHORIZED SERVICE CENTER for r epair . When servic- ing, use only identical replacement parts. WARNING: T o avo id ser iou s per son al inj ury , do not atte m ...

  • Ryobi RS290 - page 7

    7 ELECTRICAL EXTENSION CORDS When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the curr ent the product will draw . An undersized cord will cause a dr op in line voltage, r esulting in overheating and loss of power . Use the chart to determine the minimum wire si ...

  • Ryobi RS290 - page 8

    8 FEA TURES PRODUCT SPECIFICA TIONS Sanding Disc Diameter ................................................ 5 in. Motion ......................................................... Random Orbit Orbit Diameter ........................................................ 3/32 in. No Load Speed ..................................... 12,500/min (RPM) Input ... ...

  • Ryobi RS290 - page 9

    9 UNP ACKING This product has been shipped completely assembled.  Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.  Inspect the product carefully to make sure no breakage or damage occurred during shipping.  Do not discard the packing material until you have ca ...

  • Ryobi RS290 - page 10

    10 Fig. 2 A T T A C H I N G H O O K - A N D - L O O P S A N D I N G DISCS See Figure 2. NOTE: Use only 5 in. hook-and-loop sanding discs which can be found at local home centers and hardwar e stores.  Unplug the sander .  Align the holes in the hook-and-loop sanding disc with the holes in the backing pad. NOTE: Line up the holes in the sandin ...

  • Ryobi RS290 - page 11

    11 TO A TT ACH THE DUST BAG ASSEMBL Y See Figure 4.  Unplug the sander .  Slide the dust bag onto the dust exhaust on the sander using a slight twisting motion. TO EMPTY THE DUST BAG ASSEMBL Y See Figures 4 - 5. For more efficient operation, empty the dust bag when it is no more than half full. This will permit the air to flow through the bag ...

  • Ryobi RS290 - page 12

    12 OPERA TING THE SANDER See Figures 7 - 8.  Secure the work to prevent it from moving under the sander . WARNING: Unsecured work could be thrown towards the operator causing injury .  Pla ce the sand er on the wor kpie ce so that all of the sand - ing disc surface is in contact with the workpiece. CAUTION: Be careful not to let your hand cov ...

  • Ryobi RS290 - page 13

    13 MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty , also wear a dust mask. GENERAL MAINTENANCE Avoid using sol ...

  • Ryobi RS290 - page 14

    987000-172 8-23-07 (REV :01) RS290 OPERA TOR’S MANUAL RANDOM ORBIT SANDER DOUBLE INSULA TED RS290 • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Authorized Service Center . Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 ...

Manufacturer Ryobi Category Sander

Documents that we receive from a manufacturer of a Ryobi RS290 can be divided into several groups. They are, among others:
- Ryobi technical drawings
- RS290 manuals
- Ryobi product data sheets
- information booklets
- or energy labels Ryobi RS290
All of them are important, but the most important information from the point of view of use of the device are in the user manual Ryobi RS290.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Ryobi RS290, service manual, brief instructions and user manuals Ryobi RS290. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Ryobi RS290.

Similar manuals

A complete manual for the device Ryobi RS290, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Ryobi RS290 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Ryobi RS290.

A complete Ryobi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Ryobi RS290 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Ryobi RS290, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Ryobi RS290, that we can find in the current document
3. Tips how to use the basic functions of the device Ryobi RS290 - which should help us in our first steps of using Ryobi RS290
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Ryobi RS290
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Ryobi RS290 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Ryobi RS290?

Use the form below

If you did not solve your problem by using a manual Ryobi RS290, ask a question using the form below. If a user had a similar problem with Ryobi RS290 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)