English dropdown-ico

Manual Infinite Peripherals 216

102 pages 2.32 mb
Download

Go to site of 102

Summary
  • Infinite Peripherals 216 - page 1

    User Manual Kiosk thermal printer KPM-210/216 Custom printing solutions offered by Infinite Peripherals, Inc. 625 West University Drive Arlington Heights, IL 60004 (800) 278-7860 www.ipcprint.com ...

  • Infinite Peripherals 216 - page 2

    KPM210/216 PRINTER COMPONENTS A. KPM210/216 – Front external view 1- Printing mechanism 2- Release lever 3- T ilting paper holder 4- Cable connections (power supply , serial) 5- Roller cover 6- Paper exit (1) (1) A vailable in two versions: horizontal or vertical (option 0090) paper delivery . ww w .ipcprint.com ...

  • Infinite Peripherals 216 - page 3

    KPM210/216 2 1 3 4 5 6 2 7 B. KPM210/216 – Rear external view 1- Paper load 2- Paper feed guides (adjustable) 3- Keypad 4- Printing mechanism 5- Cutter 6- Paper ejector rollers unit 7- Roller cover ww w .ipcprint.com ...

  • Infinite Peripherals 216 - page 4

    KPM210/216 2 1 3 4 6 5 C. KPM210/216 – Under view 1- Power supply connection 2- Serial connection 3- USB connection 4- Line Feed key 5- Form Feed key 6- Status LED ww w .ipcprint.com ...

  • Infinite Peripherals 216 - page 5

    T ABLE OF CONTENTS KPM210/216 i INTRODUCTION MANUAL CONTENTS .................................................................................... 1 EXPLANA T OR Y NOTES USED IN THIS MANUAL ...................................... 1 GENERAL SAFETY INFORMA TION ............................................................. 1 UNP ACKING THE PRINTER ..... ...

  • Infinite Peripherals 216 - page 6

    T ABLE OF CONTENTS KPM210/216 ii 5. CHARACTER FONTS 5.1 CHARACTER SETS ............................................................................ 5 - 1 APPENDIX A - ACCESSORIES AND SP ARE P ARTS A.1 ACCESSORIES ................................................................................... A- 1 A.1.1 External paper holder .................... ...

  • Infinite Peripherals 216 - page 7

    INTRODUCTION KPM210/216 1 MANUAL CONTENTS In addition to the Introduction which includes a description of the explanatory notes used in the manual, general safety information, how to unpack the printer and a brief description of the printer including its basic features, this manual is organized as follows: Chapter 1: Contains the information requir ...

  • Infinite Peripherals 216 - page 8

    INTRODUCTION KPM210/216 2 • Only use the printer on hard surfaces and in environments that guarantee proper ventilation. • Make sure the printer is placed in such a way as to avoid damage to its wiring. • Use the type of electrical power supply indicated on the printer label. If in doubt, contact your retailer . • Do not block the ventilati ...

  • Infinite Peripherals 216 - page 9

    INTRODUCTION KPM210/216 3 2 1 • Open the printer packaging • Remove the paper roll • Remove the manual (or CD-Rom) • Remove the electrical power cable • Remove the upper tray • T ake out the foam packing shell • T ake out the printer and remove it from its plastic covering. • Keep the box, trays and packing materials in the event th ...

  • Infinite Peripherals 216 - page 10

    INTRODUCTION KPM210/216 4 PRINTER FEA TURES The KPM210-216 is an A4/US letter format thermal printer designed for Internet, information and reservation kiosks and automatic teller (A TM) machines. It is available in two models: 204 dpi (8 dots/mm) thermal printing mechanism version and 300 dpi (1 1.8 dots/mm) thermal printing mechanism version. Bot ...

  • Infinite Peripherals 216 - page 11

    INTRODUCTION KPM210/216 5 PRINTER DESCRIPTION The KPM210/216 printer (fig.2) is comprised of a metal frame, printing mechanism, a cutter and an ejector Located on the keypad are the following keys: LINE FEED (1), FORM FEED (2) and status LED (3). • LINE FEED key . When the LINE FEED key is pressed, the printer advances the paper so that the paper ...

  • Infinite Peripherals 216 - page 12

    INTRODUCTION KPM210/216 6 2 1 (Fig.2) (T ab.A.3) ww w .ipcprint.com ...

  • Infinite Peripherals 216 - page 13

    1. INST ALLA TION AND USE KPM210/216 1 1- 1 2 1.1 CONNECTIONS 1.1.1 Power Supply The printer is equipped with an external power supply outlet (see Fig. 1.1). The connector pin configuration is as follows: N I PN I P N I P N I PN I PL A N G I SL A N G I S L A N G I S L A N G I SL A N G I S 1 1 1 1 1 D N G 2 2 2 2 2 V 4 2 + W ARNING: Respect power su ...

  • Infinite Peripherals 216 - page 14

    1. INST ALLA TION AND USE KPM210/216 2 1- 1.2 CONFIGURA TION This printer permits the configuration of default parameters. The printer ’ s configurable parameters are: • Interface (1) : RS232 D , USB (if present). • Baud Rate (2) : 57600, 38400, 19200 D , 9600, 4800, 2400, 1200. • Data length (2) : 7, 8 D bits/char . • Parity (2) : None D ...

  • Infinite Peripherals 216 - page 15

    1. INST ALLA TION AND USE KPM210/216 3 1- When the receive buffer is full, if handshaking is set to XON/XOFF , the printer sends the XOFF ($13) on the serial port. When the receive buffer has cleared once again, if handshaking is set to XON/XOFF , the printer sends the XON ($1 1) on the serial port. 1.3 HEXADECIMAL DUMP This function is used to dis ...

  • Infinite Peripherals 216 - page 16

    1. INST ALLA TION AND USE KPM210/216 4 1- 2 1 3 3 Horizontal paper exit Vertical paper exit CROSS-SECTION VIEW OF FRONT P ANEL FROM P APER INFEED SIDE 20° 20° W ARNING Before inserting the paper , make sure it is cut cleanly . W ARNING Make sure the paper and printer are aligned (fig.1.4 and fig. 1.5) 1.4.2 Paper load specifications T o correctly ...

  • Infinite Peripherals 216 - page 17

    1. INST ALLA TION AND USE KPM210/216 5 1- Paper alignment axis ma x 1° ma x 1° W ARNING The roll must be perfectly aligned with the printer (fig. 1.5). The maximum play allowed is ± 1%. (Fig.1.5) ww w .ipcprint.com ...

  • Infinite Peripherals 216 - page 18

    1. INST ALLA TION AND USE KPM210/216 6 1- 216m m 210m m 216m m 210m m 2 1 1 2 2 1.4.3 Adjusting paper width Figure 1.6 illustrates the two positions of the side guides used to adjust paper width to 210mm and 216mm. T o adjust paper width to 210mm or 216mm, proceed as follows: - from the paper load opening (see fig. 1.7) loosen the fastening screws ...

  • Infinite Peripherals 216 - page 19

    1. INST ALLA TION AND USE KPM210/216 7 1- - Re-tighten the fastening screws (2). W ARNING • Assemble the side guides so that they are aligned and perpendicular to the paper load opening. 1.4.4 Paper jams In the event of a jam along the paper path, proceed as follows: T urn the printer on and off before removing the paper in order to cut the paper ...

  • Infinite Peripherals 216 - page 20

    1. INST ALLA TION AND USE KPM210/216 8 1- The area marked by a dotted line (2) indicates that area of the ejector roller unit in which the paper could jam 2 1 5 3 4 (Fig.1.8) (T ab.A.3) ww w .ipcprint.com ...

  • Infinite Peripherals 216 - page 21

    1. INST ALLA TION AND USE KPM210/216 9 1- 2 3 * 3 2 1 1.4.5 Cleaning the printing head W ARNING • Do not touch the head heating line with bare hands or metal objects. • Do not perform any operation inside the printer immediately after printing because the head and motor tend to become very hot. • The printer must be turned off when the printi ...

  • Infinite Peripherals 216 - page 22

    1. INST ALLA TION AND USE KPM210/216 10 1- Clean the heating line (black line indicated by the arrow) moistened with denatured alcohol (see fig. 1.10) 4) Return the printing head to its original position, being careful to insert the fastening pins (1) in their slots (see fig. 1.1 1) and to not damage the head cable (6) (7) . 5) Lower the paper guid ...

  • Infinite Peripherals 216 - page 23

    1. INST ALLA TION AND USE KPM210/216 11 1- 2 * 1 1 (Fig.1.1 1) 1.4.6 Cleaning the ejector rollers W ARNING • The printer must be turned off during cleaning operations. T urn off the printer and proceed as follows: 1) Lift the roller cover (1) as shown in fig. 1.12. 2) Clean the rollers (2) using a medium-stiff brush to avoid them being scratched. ...

  • Infinite Peripherals 216 - page 24

    1. INST ALLA TION AND USE KPM210/216 12 1- 2 1 (Fig.1.12) (T ab.A.3) ww w .ipcprint.com ...

  • Infinite Peripherals 216 - page 25

    2. INTERF ACES KPM210/216 1 2- 1 2 3 4 5 9876  ! " 2.1 RS232 SERIAL The printer has an RS232 interface with 9-pin female connector . Refer to the table below for the connector pin signals: N I PN I P N I P N I PN I PL A N G I SL A N G I S L A N G I S L A N G I SL A N G I ST U O / N IT U O / N I T U O / N I T U O / N IT U O / N IN O I T P I ...

  • Infinite Peripherals 216 - page 26

    2. INTERF ACES KPM210/216 2 2- KPM80/112 SIGNAL GND RXD DCD CTS DSR KPM80/ 112 PC TXD The diagrams below illustrate a sample connection between the printer and PC using a 25- or 9-pin female connector . (Fig.2.2) (Fig.2.3) (T ab.A.3) ww w .ipcprint.com ...

  • Infinite Peripherals 216 - page 27

    2. INTERF ACES KPM210/216 3 2-  ! " 2.2 USB SERIAL INTERF ACE (OPTIONAL) Printers with USB serial interface conform to USB 1.0 standards and have the following specifications: • Communication speed 12 Mbit/sec • “Receptacle series B”-type connector . Refer to the table below for the connector pin signals and connection to a device: ...

  • Infinite Peripherals 216 - page 28

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 1 3- R ever s e m od e No r m al m ode 3.1 PRINT DIRECTION The printer has two printing directions which can be selected by means of the control characters:normal and reverse. (Fig.3.1) ww w .ipcprint.com ...

  • Infinite Peripherals 216 - page 29

    3. PRINTER FUNCTIONS KPM210/216 2 3- (T ab.3.1) 3.2 COMMAND DESCRIPTIONS 3.2.1 ESC/POS Emulation The following table lists all the commands for function management in ESC/ POS  Emulation of the printer . The commands can be transmitted to the printer at any moment, but they will only be carried out when the commands ahead of them have been execu ...

  • Infinite Peripherals 216 - page 30

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 3 3- I I C S AI I C S A I I C S A I I C S AI I C S AX E HX E H X E H X E HX E Hn o i t p i r c s e Dn o i t p i r c s e D n o i t p i r c s e D n o i t p i r c s e Dn o i t p i r c s e D k n . . . 1 n D C S E L U N 0 0 k n . . . 1 n 4 4 $ B 1 $s n o i t i s o p b a t l a t n o z i r o h t e S n E ...

  • Infinite Peripherals 216 - page 31

    3. PRINTER FUNCTIONS KPM210/216 4 3- I I C S AI I C S A I I C S A I I C S AI I C S AX E HX E H X E H X E HX E Hn o i t p i r c s e Dn o i t p i r c s e D n o i t p i r c s e D n o i t p i r c s e Dn o i t p i r c s e D n H S G) n ( 8 4 $ D 1 $s r e t c a r a h c I R H f o n o i t i s o p g n i t n i r p t c e l e S n I S G) n ( 9 4 $ D 1 $D I r e t ...

  • Infinite Peripherals 216 - page 32

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 5 3- Given below are more detailed descriptions of each command. S BS B S B S BS B [Name] Back space [Format] ASCII BS Hex 0 8 Decimal 8 [Description] Moves print position to previous character . [Notes] • Can be used to put two characters at the same position. [Default] [Reference] [Example] T ...

  • Infinite Peripherals 216 - page 33

    3. PRINTER FUNCTIONS KPM210/216 6 3- F LF L F L F LF L [Name] Print and line feed [Format] ASCII L F Hex 0 A Decimal 1 0 [Description] Prints the data in the buffer and feeds one line based on the current line spacing. [Notes] • Sets the print position to the beginning of the line. [Default] [Reference] ESC 2, ESC 3 [Example] F FF F F F F FF F [N ...

  • Infinite Peripherals 216 - page 34

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 7 3- n T O E E L Dn T O E E L D n T O E E L D n T O E E L Dn T O E E L D [Name] Real-time status transmission [Format] ASCII DLE EOT n H e x 10 04 n Decimal 1 6 4 n [Range] 1 ≤ n ≤ 4; n=17, n=20 [Description] T ransmits the selected printer status specified by n in real time according to the ...

  • Infinite Peripherals 216 - page 35

    3. PRINTER FUNCTIONS KPM210/216 8 3- n=2: Off-line status t i Bn O / f f Ox e Hl a m i c e D n o i t c n u F 0f f O0 00 . f f O o t d e x i F . d e s u t o N 1n O2 02 . n O o t d e x i F . d e s u t o N 2 f f O0 00 . d e w o l d a e h t n i r P n O0 4 4 . d e t f i l d a e h t n i r P 3 f f O0 00 . n o t t u b D E E F y b d e d e e f t ' n s i ...

  • Infinite Peripherals 216 - page 36

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 9 3- n=17: Print status t i Bn O / f f Ox e Hl a m i c e D n u Fn o i t c 0f f O0 00 . f f O o t d e x i F . d e s u t o N 1n O2 02 . n O o t d e x i F . d e s u t o N 2 f f O0 00 . f f o r o t o m g a r d r e p a P n O4 04 . n o r o t o m g a r d r e p a P 3f f O0 00 . f f O o t d e x i F . d e ...

  • Infinite Peripherals 216 - page 37

    3. PRINTER FUNCTIONS KPM210/216 10 3- 4° byte = USER ST A TUS t i Bn O / f f Ox e Hl a m i c e D n u Fn o i t c 0 f f O0 00 . d e w o l d a e h t n i r P On 0 0 1 d a e h t n i r Pd e t f i l. 1f f O0 00 . f f O o t d e x i F . d e s u t o N 2f f O0 00 . f f O o t d e x i F . d e s u t o N 3 f f O0 00 . f f o r o t o m r e p a p g a r D On 0 8 8 . ...

  • Infinite Peripherals 216 - page 38

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 11 3- 6° byte = Unrecoverable error Status t i Bn O / f f Ox e Hl a m i c e D n u Fn o i t c 0 f f O0 00 . k o r e t t u C n O1 01 . r o r r e r e t t u C 1O f f0 0 0 O o t d e x i F . d e s u t o Nf f. 2 f f O0 00 . k o M A R n O4 04 . r o r r e M A R 3 f f O0 00 . k o M O R P E E f f O0 00 . r ...

  • Infinite Peripherals 216 - page 39

    3. PRINTER FUNCTIONS KPM210/216 12 3- [Notes] • The character spacing is added on right of each character . • The right character spacing for double-width mode is twice the normal value. When the characters are enlarged, the right side character spacing is m (2 or 4) times the normal value. • The horizontal and vertical motion units are speci ...

  • Infinite Peripherals 216 - page 40

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 13 3- t i Bn O / f f Ox e Hl a m i c e D n u Fn o i t c ) i p d 0 0 2 ( i p c 5 1 / 1 1 ) i p d 0 0 3 ( i p c 3 2 / 7 1 ) i p d 0 0 2 ( i p c 0 2 / 5 1 ) i p d 0 0 3 ( i p c 0 3 / 3 2 0 f f O0 00 . d e t c e l e s A t n o f r e t c a r a h C 4 2 x 8 14 2 x 3 1 n O1 01 . d e t c e l e s B t n o f ...

  • Infinite Peripherals 216 - page 41

    3. PRINTER FUNCTIONS KPM210/216 14 3- H n L n $ C S EH n L n $ C S E H n L n $ C S E H n L n $ C S EH n L n $ C S E [Name] Set absolute print position [Format] ASCII ESC $ n L n H Hex 1 B 2 4 n L n H Decimal 2 7 3 6 nL n H [Range] 0 ≤ nL ≤ 255 0 ≤ nH ≤ 255 [Description] Sets the distance from the beginning of the line to the posi- tion at w ...

  • Infinite Peripherals 216 - page 42

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 15 3- [Notes] • Only the LSB of n is applicable. • When the user-defined character set is canceled, the inter- nal character set is automatically selected. [Default] n=0 [Reference] ESC &, ESC ? [Example] y ( d … 1 d 1 x [ 2 C 1 C Y & C S Ey ( d … 1 d 1 x [ 2 C 1 C Y & C S E y ...

  • Infinite Peripherals 216 - page 43

    3. PRINTER FUNCTIONS KPM210/216 16 3- • The user-defined character definitions are cleared when: ESC @ or GS * or ESC ? are executed or the printer is reset or the power shut off. [Default] Internal character set. [Reference] ESC %, ESC ? [Example] H n L n v ( C S EH n L n v ( C S E H n L n v ( C S E H n L n v ( C S EH n L n v ( C S E [Name] Set ...

  • Infinite Peripherals 216 - page 44

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 17 3- • The horizzontal and vertical motion unit are specified by GS P . • The GS P command can change the horizontal (and verti- cal) motion unit. However , the value cannot be less than the minimum horizontal movement amount. • In standard mode, the vertical motion unit is used. [Default] ...

  • Infinite Peripherals 216 - page 45

    3. PRINTER FUNCTIONS KPM210/216 18 3- for the 300 dpi model : me d o M n o i t c e r i d l a c i t r e Vn o i t c e r i d l a t n o z i r o H s t o d . NI P DI P D) k ( a t a D f o . N 0 e l g n i s t o d 8 y t i s n e d 80 0 10 5 16 5 2 x H n + L n 1 e l b u o d t o d 8 y t i s n e d 80 0 10 0 36 5 2 x H n + L n 2 3 e l g n i s t o d 4 2 y t i s n ...

  • Infinite Peripherals 216 - page 46

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 19 3- 8-dot bit image 24-dot bit image [Default] [Reference] [Example] n - C S En - C S E n - C S E n - C S En - C S E [Name] T urn underline mode on/off [Format] ASCII ESC - n Hex 1 B 2 D n Decimal 2 7 4 5 n [Range] 0 ≤ n ≤ 2, 48 ≤ n ≤ 50 [Description] T urns underline mode on or off, ba ...

  • Infinite Peripherals 216 - page 47

    3. PRINTER FUNCTIONS KPM210/216 20 3- [Reference] ESC ! [Example] 0 C S E0 C S E 0 C S E 0 C S E0 C S E [Name] Select 1/8-inch (for 204 dpi) or 1/12-inch line spacing [Format] ASCII ESC 0 Hex 1 B 3 0 Decimal 2 7 4 8 [Description] Selects 1/8-inch (for 204 dpi) or 1/12-inch (for 300 dpi) line spacing . [Notes] [Default] [Reference] ESC 2, ESC 3 [Exa ...

  • Infinite Peripherals 216 - page 48

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 21 3- [Description] Sets line spacing to [ n × (vertical or horizontal motion unit)] inches. [Notes] • The horizontal and vertical motion unit are specified by GS P or GS $D0 . Changing the horizontal or vertical motion unit does not affect the current line spacing. • The GS P or GS $D0 comm ...

  • Infinite Peripherals 216 - page 49

    3. PRINTER FUNCTIONS KPM210/216 22 3- n = C S En = C S E n = C S E n = C S En = C S E [Name] Select peripheral device [Format] ASCII ESC = n Hex 1 B 3 D n Decimal 2 7 6 1 n [Range] 0 ≤ n ≤ 255 [Description] Select the device to which the host computer sends data, using n as follows: t i Bn O / f f Ox e Hl a m i c e D n o i t c n u F 0 f f O0 00 ...

  • Infinite Peripherals 216 - page 50

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 23 3- celled, the corresponding pattern for the internal character is printed. • This command deletes the pattern defined for the specified character code in the font selected by ESC ! . • If the user-defined character has not been defined for the specified character code, the printer ignores ...

  • Infinite Peripherals 216 - page 51

    3. PRINTER FUNCTIONS KPM210/216 24 3- [Notes] • The horizontal tab position is stored as a value of [character width x n ] measured from the beginning of the line. The char- acter width includes the right-side character spacing and double-width characters are set with twice the width of normal characters. • This command cancels previous tab set ...

  • Infinite Peripherals 216 - page 52

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 25 3- n G C S En G C S E n G C S E n G C S En G C S E [Name] T urn double-strike mode on/off [Format] ASCII ESC G n Hex 1 B 4 7 n Decimal 2 7 7 1 n [Range] 0 ≤ n ≤ 255 [Description] T urns double-strike mode on or off. • When the LSB of n is 0, the double-strike mode is off. • When the LS ...

  • Infinite Peripherals 216 - page 53

    3. PRINTER FUNCTIONS KPM210/216 26 3- [Reference] GS P or GS $D0 [Example] n R C S En R C S E n R C S E n R C S En R C S E [Name] Select an international character set [Format] ASCII ESC R n Hex 1 B 5 2 n Decimal 2 7 8 2 n [Range] 0 ≤ n ≤ 10 [Description] Selects the international character set n according to the table below: x e H3 24 20 4B 5C ...

  • Infinite Peripherals 216 - page 54

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 27 3- n V C S En V C S E n V C S E n V C S En V C S E [Name] Set 90 ° rotated print mode. [Format] ASCII ESC V n Hex 1 B 5 6 n Decimal 2 7 8 6 n [Range] 0 ≤ n ≤ 1 48 ≤ n ≤ 49 [Description] T urns 90 ° rotation mode on/off. n is used as follows : n n n n nn o i t c n u Fn o i t c n u F n ...

  • Infinite Peripherals 216 - page 55

    3. PRINTER FUNCTIONS KPM210/216 28 3- by using the horizontal or vertical motion unit. Sets the distance from the current position to [(nL+ nH × 256) × (horizontal or vertical motion unit)]. [Notes] • Any setting that exceeds the printable area is ignored. • When the starting position is specified by n motion units to the right: nL + nH × 25 ...

  • Infinite Peripherals 216 - page 56

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 29 3- cording to the previously-entered mode. [Default] n = 0 [Reference] [Ex amp le] Flush left Centered Flush right n 5 c C S En 5 c C S E n 5 c C S E n 5 c C S En 5 c C S E [Name] Enable/disable front panel buttons [Format] ASCII ESC c 5 n H e x 1B 63 35 n Decimal 2 7 9 9 5 3 n [Range] 0 ≤ n ...

  • Infinite Peripherals 216 - page 57

    3. PRINTER FUNCTIONS KPM210/216 30 3- ESC 2 or ESC 3 . • The maximum paper feed amount is 254 rows. Even if a paper feed amount of more than 254 rows is set, the printer feeds the paper only 254 rows. [Default] [Reference] ESC 2, ESC 3 [Example] i C S Ei C S E i C S E i C S Ei C S E [Name] T otal cut [Format] ASCII ESC i Hex 1 B 6 9 Decimal 2 7 1 ...

  • Infinite Peripherals 216 - page 58

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 31 3- ne g a P 0) ] e p o r u E d r a d n a t S , . A . S . U [ 7 3 4 C P ( 0 2) ] l a u g n i l i t l u M [ 0 5 8 C P ( 2 3) ] l e s e u g u t r o P [ 0 6 8 C P ( 3 4) ] h c n e r F - n a i d a n a C [ 3 6 8 C P ( 4 5) ] c i d r o N [ 5 6 8 C P ( 5 9 1) 3 1 2 n o i t i s o p t a l o b m y s o r ...

  • Infinite Peripherals 216 - page 59

    3. PRINTER FUNCTIONS KPM210/216 32 3- t i Bn O / f f Ox e Hl a m i c e D n o i t c n u F 01 , f f O0 00 : r o s n e s d n e - r e p a p r a e N t n e s e r p r e p a P n O0 3 3 : r o s n e s d n e - r e p a p r a e N t n e s e r p t o n r e p a P 3 , 2 f f O0 00 : r o s n e s d n e - r e p a P t n e s e r p r e p a P n O) C 0 () 2 1 ( : r o s n e s ...

  • Infinite Peripherals 216 - page 60

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 33 3- [Default] n = 0 [Reference] [Example] Upside-down printing Off Upside-down printing On C S EC S E C S E C S EC S E ⊥ ⊥ ⊥ ⊥ ⊥ n n n n n [Name] Set/cancel cpi mode [Format] ASCII ESC ⊥ n Hex 1 B C 1 n Decimal 2 7 1 9 3 n [Range] 0 ≤ n ≤ 1, 48 ≤ n ≤ 49 [Description] Sets cp ...

  • Infinite Peripherals 216 - page 61

    3. PRINTER FUNCTIONS KPM210/216 34 3- in ram. n selects the graphic source as follows: nn o i t c n u F 0m a r m o r f e g a p c i h p a r g t n i r P ) t n e m o m e h t t a d e s u ( 1h s a l f m o r f 1 o g o l t n i r P The maximum printable vertical dimension dhmax is : • for the 204 dpi model dhmax = 315 • for the 300 dpi model dhmax = 21 ...

  • Infinite Peripherals 216 - page 62

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 35 3- [Default] [Reference] ESC ³ , ESC ² , ESC ¦ [Example] n ³ C S En ³ C S E n ³ C S E n ³ C S En ³ C S E [Name] T ransfer flash bank into graphic page [Format] ASCII ESC ³ n Hex 1 B F C n Decimal 2 7 2 5 2 n [Range] n = 1 [Description] T ransfers flash bank into graphic page used at t ...

  • Infinite Peripherals 216 - page 63

    3. PRINTER FUNCTIONS KPM210/216 36 3- H n L n ² C S EH n L n ² C S E H n L n ² C S E H n L n ² C S EH n L n ² C S E [Name] Receive graphic page from communication port [Format] ASCII ESC ² nL n H Hex 1 B F D n L n H Decimal 2 7 2 5 3 nL n H [Range] 0 ≤ nL , nH ≤ 255 [Description] Receives [ nL + ( nH × 256)] words from the port and puts ...

  • Infinite Peripherals 216 - page 64

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 37 3- [Notes] • This command makes the flash copy of the graphic page in use. If the graphic page has been cancelled by a printing command, the stored logo will be white. [Default] [Reference] ESC · , ESC ² , ESC ³ [Example] n ! S Gn ! S G n ! S G n ! S Gn ! S G [Name] Select character size ...

  • Infinite Peripherals 216 - page 65

    3. PRINTER FUNCTIONS KPM210/216 38 3- • ESC ! can also be used to select character size. However , the setting of the last received command is the effective one. [Default] n = 0 [Reference] ESC ! [Example] : S G: S G : S G : S G: S G [Name] Start/end macro definition [Format] ASCII GS : Hex 1 D 3 A Decimal 2 9 5 8 [Description] Starts or ends mac ...

  • Infinite Peripherals 216 - page 66

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 39 3- [Description] T urns white/black reverse printing mode on or off. • When the LSB of n is 0, white/black reverse printing is turned off. • When the LSB of n is 1, white/black reverse printing is turned on. [Notes] • Only the LSB di n is effective. • This command is available for both ...

  • Infinite Peripherals 216 - page 67

    3. PRINTER FUNCTIONS KPM210/216 40 3- mn o i t i s o p g n i t n i r Ps s e l s t i g i d f o g n i s s e c o r P d e i f i c e p s e s o h t n a h t 8 4 , 0t h g i r h s u l Ft f e l e h t o t s e c a p s s d d A 9 4 , 1t h g i r h s u l Ft f e l e h t o t ' 0 ' a s d d A 0 5 , 2t f e l h s u l Ft h g i r e h t o t s e c a p s s d d A [N ...

  • Infinite Peripherals 216 - page 68

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 41 3- [a L + (a H × 256)] and the maximum value is [b L + (b H × 256)]. • Setting the count-down mode, the maximum counter value is [a L + (a H × 256)] and the minimum value is [b L + (b H × 256)]. If the counting down reaches a value less than the minimum, it resets to the maximum value. ? ...

  • Infinite Peripherals 216 - page 69

    3. PRINTER FUNCTIONS KPM210/216 42 3- ; c s ; r s ; n s ; b s ; a s ; C S G; c s ; r s ; n s ; b s ; a s ; C S G ; c s ; r s ; n s ; b s ; a s ; C S G ; c s ; r s ; n s ; b s ; a s ; C S G; c s ; r s ; n s ; b s ; a s ; C S G [Name] Select count mode (B) [Format] ASCII GS C ; sa ; s b ; s n ; sr ; s c ; H e x 1D 43 3B s a 3B sb 3B s n 3B s r 3B s c ...

  • Infinite Peripherals 216 - page 70

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 43 3- [Default] sa = 1, sb = 65535, sn = 1, sr = 1, sc = 1 [Reference] GS C 0, GS C 2, GS C 1, GS c [Example] n H S Gn H S G n H S G n H S Gn H S G [Name] Select printing position of Human Readable Interpreta- tion ( HRI ) characters [Format] ASCII GS H n Hex 1 D 4 8 n Decimal 2 9 7 2 n [Range] 0 ...

  • Infinite Peripherals 216 - page 71

    3. PRINTER FUNCTIONS KPM210/216 44 3- nD I r e t n i r Pn o i t a c i f i c e p S 9 4 , 1D I l e d o m r e t n i r P ) i p d 4 0 2 ( H 5 4 ) i p d 0 0 3 ( H 6 5 0 5 , 2D I e p y Tw o l e b e l b a t e e S 1 5 , 3D I n o i s r e v M O R M O R n o s d n e p e D ) r e t c a r a h c 4 ( n o i s r e v n = 2, T ype ID t i Bn O / f f Ox e Hl a m i c e D n ...

  • Infinite Peripherals 216 - page 72

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 45 3- H n L n L S GH n L n L S G H n L n L S G H n L n L S GH n L n L S G [Name] Set left margin [Format] ASCII GS L n L n H H e x 1D 4C n L n H Decimal 2 9 7 6 nL n H [Range] 0 ≤ nL, nH ≤ 255 [Description] Sets the left margin. • The left margin is set to [(nL + nH × 256) × (horizontal m ...

  • Infinite Peripherals 216 - page 73

    3. PRINTER FUNCTIONS KPM210/216 46 3- ) 1 e d o m ( y x P S G) 1 e d o m ( y x P S G ) 1 e d o m ( y x P S G ) 1 e d o m ( y x P S G) 1 e d o m ( y x P S G [Name] Set horizontal and vertical motion units [Format] ASCII GS P x y Hex 1 D 5 0 x y Decimal 2 9 8 0 x y [Range] 0 ≤ x, y ≤ 255 [Description] Sets the horizontal and vertical motion units ...

  • Infinite Peripherals 216 - page 74

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 47 3- [Description] Sets the printing area width to the area specified by nL and nH . • The value of nMax is : - 1664 for the 204 dpi model - 2484 for the 300 dpi model • The left margin is set to [(nL + nH × 256) × (horizontal mo- tion unit)] inches. Printable area Left margin Printing are ...

  • Infinite Peripherals 216 - page 75

    3. PRINTER FUNCTIONS KPM210/216 48 3- 0 ≤ m ≤ 1 [Description] Executes a macro. • r specifies the number of times to execute the macro. • t specifies the waiting time for executing the macro. The waiting time is t × 100 msec. for each macro execution. • m specifies macro executing mode: When the LSB of m = 0, the macro is executed r time ...

  • Infinite Peripherals 216 - page 76

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 49 3- • In count-up mode, if the counter value set by this command goes out of the counter operation range set by GS C 1 or GS C ; it is forced to revert to the minimum value. • In count-down mode, if the counter value set by this com- mand goes out of the counter operation range set by GS C ...

  • Infinite Peripherals 216 - page 77

    3. PRINTER FUNCTIONS KPM210/216 50 3- [Notes] m must be sent with n = 3; with n = 3 if the ticket is not yet cutted, before to perform the command, the printer made a total cut. [Reference] [Example] The correct commands sequence to print a ticket is : 1. Clear dispenser Ejection (Hex : 1D 65 05) or Retraction (Hex : 1D 65 02) 2. Prints ticket 3. C ...

  • Infinite Peripherals 216 - page 78

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 51 3- n h S Gn h S G n h S G n h S Gn h S G [Name] Set bar code height [Format] ASCII GS h n Hex 1 D 6 8 n Decimal 2 9 1 0 4 n [Range] 1 ≤ n ≤ 255 [Description] Sets the height of the bar code. n specifies the number of vertical dots. [Notes] [Default] n = 162 (20.25 mm) for the 204 dpi model ...

  • Infinite Peripherals 216 - page 79

    3. PRINTER FUNCTIONS KPM210/216 52 3- Œ mm e t s y s e d o c r a Bs r e t c a r a h c f o . o Ns k r a m e R 0A - C P U1 1 ≤ k ≤ 2 18 4 ≤ d ≤ 7 5 1E - C P U1 1 ≤ k ≤ 2 18 4 ≤ d ≤ 7 5 2) N A J ( 3 1 N A E2 1 ≤ k ≤ 3 18 4 ≤ d ≤ 7 5 3) N A J ( 8 N A E7 ≤ k ≤ 88 4 ≤ d ≤ 7 5 49 3 E D O C1 ≤ k 8 4 ≤ d ≤ 5 6 , 7 5 ? ...

  • Infinite Peripherals 216 - page 80

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 53 3- • This command feeds as much paper as is required to print the bar code, regardless of the line spacing specified by ESC 2 or ESC 3 . • After printing the bar code, this command sets the print position to the beginning of the line. • This command is not affected by print modes (empha- ...

  • Infinite Peripherals 216 - page 81

    3. PRINTER FUNCTIONS KPM210/216 54 3- r e t c a r a h c c i f i c e p S n o i s s i m s n a r t a t a D I I C S Ax e Hl a m i c e D T F I H SS {3 5 , B 73 8 , 3 2 1 A E D O CA {1 4 , B 75 6 , 3 2 1 B E D O CB {2 4 , B 76 6 , 3 2 1 C E D O CC {3 4 , B 77 6 , 3 2 1 1 C N F1 {1 3 , B 79 4 , 3 2 1 2 C N F2 {2 3 , B 70 5 , 3 2 1 3 C N F3 {3 3 , B 71 5 , ...

  • Infinite Peripherals 216 - page 82

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 55 3- t i Bn O / f f Ox e Hl a m i c e D n o i t c n u F 01 , f f O0 00 : r o s n e s d n e - r e p a p r a e N t n e s e r p r e p a P n O0 3 3 : r o s n e s d n e - r e p a p r a e N t n e s e r p t o n r e p a P 3 , 2 f f O0 00 : r o s n e s d n e - r e p a P t n e s e r p r e p a P n O) C 0 ( ...

  • Infinite Peripherals 216 - page 83

    3. PRINTER FUNCTIONS KPM210/216 56 3- n n n n nh t d i w e l u d o Mh t d i w e l u d o M h t d i w e l u d o M h t d i w e l u d o Mh t d i w e l u d o M) m m ( i p d 4 0 2i p d 4 0 2 i p d 4 0 2 i p d 4 0 2i p d 4 0 2i p d 0 0 3i p d 0 0 3 i p d 0 0 3 i p d 0 0 3i p d 0 0 3 15 2 1 . 05 8 0 . 0 25 2 . 07 1 . 0 35 7 3 . 04 5 2 . 0 45 . 09 3 3 . 0 5 ...

  • Infinite Peripherals 216 - page 84

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 57 3- [Notes] • Printing density reverts to the default value when the printer is reset or turned off. [Default] n = 4 [Reference] [Example] n ~ S Gn ~ S G n ~ S G n ~ S Gn ~ S G [Name] Set superscript/subscript [Format] ASCII GS ~ n Hex 1 D 7 E n Decimal 2 9 1 2 6 n [Range] n = 0, 1, 48, 49 [D ...

  • Infinite Peripherals 216 - page 85

    3. PRINTER FUNCTIONS KPM210/216 58 3- When y is set to 0, the default setting value is used. [Notes] • The horizontal direction is perpendicular to the paper feed direction. • In standard mode, the following commands use x or y , re- gardless of character rotation (upside-down or 90 ° clockwise rotation): Q Commands using x : ESC SP , ESC $, E ...

  • Infinite Peripherals 216 - page 86

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 59 3- t i Bn O / f f Ox e Hl a m i c e D n o i t c n u F 0 f f O0 00 . s u t a t s r e p a P e l b a s i D n O1 01 . s u t a t s r e p a P e l b a n E 1 f f O0 00 . s u t a t s r e s U e l b a s i D n O2 02 . s u t a t s r e s U e l b a n E 2 f f O0 00 . s u t a t S r o r r E e l b a r e v o c e ...

  • Infinite Peripherals 216 - page 87

    3. PRINTER FUNCTIONS KPM210/216 60 3- [Notes] • The lenght of residual paper reported is just as an indication because tolerances and other factors are not taken into con- sideration (paper thickness, roll core diameter , roll core thick- ness). The virtual paper-end limit is set by the command GS µ . • T o set virtual paper-end limit, measure ...

  • Infinite Peripherals 216 - page 88

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 61 3- ‘ 251550cm ’ [Notes] [Default] [Reference] [Example] S GS G S G S GS G Σ Σ Σ Σ Σ [Name] Reading number of retracting [Format] ASCII GS Σ Hex 1 D E 4 Decimal 2 9 2 2 8 [Description] Reading number of retracting of the printer . [Notes] • The command return a string pointing out t ...

  • Infinite Peripherals 216 - page 89

    3. PRINTER FUNCTIONS KPM210/216 62 3- S GS G S G S GS G µ µ µ µ µ L n H nL n H n L n H n L n H nL n H n [Name] Virtual paper-end limit [Format] ASCII GS µ n H n L Hex 1 D E 6 n H n L Decimal 2 9 2 3 0 n H nL [Range] 0 ≤ nH ≤ 255 0 ≤ nL ≤ 255 [Description] This command sets the limit after which is pointed out the virtual paper-end. [N ...

  • Infinite Peripherals 216 - page 90

    3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS KPM210/216 63 3- nr Pi d e e p s g n i t ne m i t e m a s e h t t a N O s t o d m u m i x a M i p d 4 0 2i p d 0 0 3 0w o L6 1 46 1 6 1l a m r o N2 3 82 3 2 1 2h g i H4 6 6 14 6 4 2 [Notes] • Printing speed reverts to the default value when the printer is reset or turned off. [Default] n = 1 [Reference] [ ...

  • Infinite Peripherals 216 - page 91

    4. TECHNICAL SPECIFICA TIONS KPM210/216 1 4- 4.1 TECHNICAL SPECIFICA TIONS T able 4.1 gives the main technical specifications of the 204 dpi printer . d o h t e m g n i t n i r Pd o h t e m g n i t n i r P d o h t e m g n i t n i r P d o h t e m g n i t n i r Pd o h t e m g n i t n i r P ) m m / t o d 8 ( d a e h d e x i f l a m r e h T n o i t u l ...

  • Infinite Peripherals 216 - page 92

    4. TECHNICAL SPECIFICA TIONS KPM210/216 2 4- ) l a m r o N = g n i t t e s t n e r r u c ( t u p n i l a c i r t c e l E) l a m r o N = g n i t t e s t n e r r u c ( t u p n i l a c i r t c e l E ) l a m r o N = g n i t t e s t n e r r u c ( t u p n i l a c i r t c e l E ) l a m r o N = g n i t t e s t n e r r u c ( t u p n i l a c i r t c e l E) l ...

  • Infinite Peripherals 216 - page 93

    4. TECHNICAL SPECIFICA TIONS KPM210/216 3 4- T able 4.2 gives the main technical specifications of the 300 dpi printer . Note : (1) Dependent of power of power supply utilized. (T ab.4.2) d o h t e m g n i t n i r Pd o h t e m g n i t n i r P d o h t e m g n i t n i r P d o h t e m g n i t n i r Pd o h t e m g n i t n i r P ) m m / t o d 8 . 1 1 ( ...

  • Infinite Peripherals 216 - page 94

    4. TECHNICAL SPECIFICA TIONS KPM210/216 4 4- ) l a m r o N = g n i t t e s t n e r r u c ( t u p n i l a c i r t c e l E) l a m r o N = g n i t t e s t n e r r u c ( t u p n i l a c i r t c e l E ) l a m r o N = g n i t t e s t n e r r u c ( t u p n i l a c i r t c e l E ) l a m r o N = g n i t t e s t n e r r u c ( t u p n i l a c i r t c e l E) l ...

  • Infinite Peripherals 216 - page 95

    4. TECHNICAL SPECIFICA TIONS KPM210/216 5 4- 291 138 281 42 36 M4 133 (ingres so carta) 212 264 32,7 138 5 5 4,7 ingr esso c avi al imenta zione, connes sione s eriale e USB 83 183,2 6 23 35 2,5 * 14 9,2 * 2,5 * 2,5 60 2 125,2 14 19 88 4.2 DIMENSIONS Figure 4.1 shows the dimensions of the table top printer . (Fig.4.1) ww w .ipcprint.com ...

  • Infinite Peripherals 216 - page 96

    5. CHARACTER SETS KPM210/216 1 5- FONT 1 1 cpi PC437 (USA, Standard Europe) PC850 (Multilingual) PC860 (Portuguese) PC863 (Canadian-French) 5.1 CHARACTER SETS The printer has 3 fonts of varying width for the 204 dpi (1 1, 15 and 20 cpi) and 300 dpi (17, 23 and 30 cpi) models, which may be accessed through programming (section 1.2) or control charac ...

  • Infinite Peripherals 216 - page 97

    5. CHARACTER SETS KPM210/216 2 5- PC858 (Euro symbol) (Fig.5.2) PC865 (Nordic) T o print the Euro (€) symbol, the command sequence is: 1B, 74, 13, D5 (see Chapter 3) (T ab.A.3) ww w .ipcprint.com ...

  • Infinite Peripherals 216 - page 98

    APPENDIX A - ACCESSORIES AND SP ARE P AR TS KPM210/216 1 A- 187. 0 L VR1 50. 4 11 4 .0 203. 0 + V CN1 CN3 106. 0 FG N CN2 LED 1 + V + V - V - V - V A.1 ACCESSORIES A.1.1 Power Supply The figure below illustrates the power supply provided by Custom to be used for printer operation. s n o i t a c i f i c e p S t u p t u Os n o i t a c i f i c e p S t ...

  • Infinite Peripherals 216 - page 99

    APPENDIX A - ACCESSORIES AND SP ARE P AR TS KPM210/216 2 A- 5 2 1 3 4 A.1.2 External roll holder The printer includes a paper roll support kit for both the KPM210 and KPM216 models as shown in tab. A-2: The kit includes (see fig. A-2) : - Paper roll (*) (1); - Roll pin (*) (2); - Roll holder support (3); - Paper almost out sensor (4); - Fastening s ...

  • Infinite Peripherals 216 - page 100

    APPENDIX A - ACCESSORIES AND SP ARE P AR TS KPM210/216 3 A- a 4 2 1 3 (Fig.A.3) Assembly Instructions 1. Screw the sensor card (2) to the support (3) using the fastening screw (1) supplied with the kit as shown in fig. A-3. 2. Thread the sensor wiring connector into its respective slot on the front of the printer (4) as shown in fig. A-3. 3. T o pe ...

  • Infinite Peripherals 216 - page 101

    APPENDIX A - ACCESSORIES AND SP ARE P AR TS KPM210/216 4 A- J6 Sensor wiring (Fig.A.4) View from below ww w .ipcprint.com ...

  • Infinite Peripherals 216 - page 102

    APPENDIX A - ACCESSORIES AND SP ARE P AR TS KPM210/216 5 A- A.2 SUPPLIES R G 0 7 - M M 5 2 - 0 4 1 X 0 1 2 T C RR G 0 7 - M M 5 2 - 0 4 1 X 0 1 2 T C R R G 0 7 - M M 5 2 - 0 4 1 X 0 1 2 T C R R G 0 7 - M M 5 2 - 0 4 1 X 0 1 2 T C RR G 0 7 - M M 5 2 - 0 4 1 X 0 1 2 T C Rm m 0 1 2 - l l o r r e p a p l a m r e h Tm m 0 1 2 - l l o r r e p a p l a m r ...

Manufacturer Infinite Peripherals Category Printer

Documents that we receive from a manufacturer of a Infinite Peripherals 216 can be divided into several groups. They are, among others:
- Infinite Peripherals technical drawings
- 216 manuals
- Infinite Peripherals product data sheets
- information booklets
- or energy labels Infinite Peripherals 216
All of them are important, but the most important information from the point of view of use of the device are in the user manual Infinite Peripherals 216.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Infinite Peripherals 216, service manual, brief instructions and user manuals Infinite Peripherals 216. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Infinite Peripherals 216.

Similar manuals

A complete manual for the device Infinite Peripherals 216, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Infinite Peripherals 216 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Infinite Peripherals 216.

A complete Infinite Peripherals manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Infinite Peripherals 216 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Infinite Peripherals 216, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Infinite Peripherals 216, that we can find in the current document
3. Tips how to use the basic functions of the device Infinite Peripherals 216 - which should help us in our first steps of using Infinite Peripherals 216
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Infinite Peripherals 216
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Infinite Peripherals 216 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Infinite Peripherals 216?

Use the form below

If you did not solve your problem by using a manual Infinite Peripherals 216, ask a question using the form below. If a user had a similar problem with Infinite Peripherals 216 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)