Manual Tyco Electronics 3200L

45 pages 1.11 mb
Download

Go to site of 45

Summary
  • Tyco Electronics 3200L - page 1

    User Manual 3200L 32” Interactive Digital Signage T ouchMonitor 4200L 42” Interactive Digital Signage T ouchMonitor 4600L 46” Interactive Digital Signage T ouchMonitor Interactive Digital Si gnage Computer Module User Manual – Interactive Digital Signage SW601 176 Rev A - Page 1 of 45 ...

  • Tyco Electronics 3200L - page 2

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 2 of 45 Copyright © 2010 T yco Electroni cs. All Right s Reserved. No part of this publication may be reproduced, trans mitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited t ...

  • Tyco Electronics 3200L - page 3

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 3 of 45 T able of Content s Chapter 1 - Introduction ........................................................................... 4 Chapter 2 – Unp acking .............................................................................. 5 Chapter 3 – T ouchmonitor Installation ..... ...

  • Tyco Electronics 3200L - page 4

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 4 of 45 Chapter 1 - Introduction Product Description Y our new Interactive Digital Signage T ouchM onitor combines Elo T ouchSyst ems’ reliable performance with the latest developments in touch technology and display design. This combination of features creat es a natural flow of ...

  • Tyco Electronics 3200L - page 5

    Chapter 2 – Unpacking Unp acking the T ouchmonitor T o unpack the touchmonitor , follow these steps: 1. The carton should be oriented in the manner according to it s labeling. The hinged plastic locks should be at the ‘bottom’. 2. Open and remove all 4 hinged plastic locks. 3. Once the locks are removed, lift the carton’ s top lid of f the ...

  • Tyco Electronics 3200L - page 6

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 6 of 45 Note: For your health and safety , it is strongly recommended that at least two people handle, lift, or move these touchmonitors. T wo handles are provided on the unit’ s back for easier handling. Check that the following items are present and in good condition: • T ouch ...

  • Tyco Electronics 3200L - page 7

    Chapter 3 - T ouchmonitor Installation Connector Panel & Interfaces Remove the cable cover on the bottom rear (when viewed in landscape orientation) to access the touchmonitor ’s connector panel. User Manual – Interactive Digital Signage SW601 176 Rev A - Page 7 of 45 ...

  • Tyco Electronics 3200L - page 8

    3200L 4200L / 4600L T ouchmonitor Connections 1. Connect the HDMI and/or VGA video cabl es between the monitor ’s HDMI/VGA input connectors and your HDMI/VGA video source, res pectively . T ighten the VGA cable’ s screws for best EMI performance and strain relief. 2. Connect the USB touch cable between the moni tor ’s USB connector and the PC ...

  • Tyco Electronics 3200L - page 9

    Inst alling the APR T ouch T echnology Software (for Windows 7, V ist a, XP , WEPOS, and 32-bit Server 2003) Some software inst allation is required for your APR touchmonitor to work on your computer . V isit the Elo T ouchSystems website www .elotouch.com for: • The latest touch driver versions • Additional touch driver information • Detaile ...

  • Tyco Electronics 3200L - page 10

    • Rename the file in the APRda ta directory to “AprCF .bin” 4. Connect the USB cable between the monitor ’s USB connector and your PC’s USB port. Y our touchmonitor ’s touch functionality will be working now . Note: Do not lose the touchmonitor ’s APR Calibration USB Drive or APR Calibration file! It is unique to your touchmonitor , a ...

  • Tyco Electronics 3200L - page 11

    Chapter 4 Computer Module Installation Inst allation Note: Disconnect AC power from the touchmonitor before installing the Computer Module. Installing the Computer Module while AC powe r is connected to the touchmonitor will damage the Computer Module. 1. Disconnect AC power from the touchmonitor . 2. Remove the cable cover on the side of the touch ...

  • Tyco Electronics 3200L - page 12

    3. Use a Philips head screwdriver to remove t he Computer Module bay’ s protective plate. 4. Clear the Computer Module’ s docking connector of any debris that may have accumulated during shipment, if necessary . 5. Slide the Computer Modul e all the way into the bay until it snaps into place User Manual – Interactive Digital Signage SW601 176 ...

  • Tyco Electronics 3200L - page 13

    Connector Panel & Interfaces T ouchMonitor & Computer Module Connections 1. Once the Computer Modul e has been installed, connect the AC power cable between the touchmonitor ’s POWER IN connector and the AC power source. 2. Make any desired connections to the Computer Module connector p anel. 3. Press and hold the touchmonitor ’ s power ...

  • Tyco Electronics 3200L - page 14

    Operating System Setup Windows ® 7, Windows ® XP Operating Systems The initial setup of th e operating system ta kes approximately 5 minutes. Additional time might be needed for different touchcomput er hardware & operating system configurations. Y ou will need to plug in an external mouse and/or keyboar d into the Computer Module connector p ...

  • Tyco Electronics 3200L - page 15

    Click Customize. The “Regional and Language Options” window appears. Select the Languages tab. If required, check t he boxes for “Inst all files for complex script and right-to-left languages” and “Install files for East Asian languages.” Select the “Regional Options” tab. Select your preferred language from the drop-down list in th ...

  • Tyco Electronics 3200L - page 16

    Select your location from the drop-down list in the Locations p ane. Click Ap ply , and then OK. Selecting the Time Zone When the following window appears, you can change the Computer Module’s time zone, date, and time. After making any changes, click Next to finish. Windows Setup completes the OS installation. User Manual – Interactive Digital ...

  • Tyco Electronics 3200L - page 17

    Inst alling the APR T ouch T echnology Software (for Elo Computer Modules with Windows 7 and W indows XP) Some software inst allation is required for th e APR touc hmonitor to work with the Computer Module. Y ou will need to plug in an external mouse and/or keyboard into the Computer Module connector panel to execute these step s. V isit the Elo T ...

  • Tyco Electronics 3200L - page 18

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 18 of 45 Note: Do not lose the touchmonitor ’s APR Calibration USB Drive or APR Calibration file! It is unique to your touchmonitor , and required for that touchmonitor to function. If you connect this touchmonitor to a dif ferent computer , or if you update the touch driver on yo ...

  • Tyco Electronics 3200L - page 19

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 19 of 45 Note: Do not lose the touchmonitor ’s APR Calibration USB Drive or APR Calibration file! It is unique to your touchmonitor , and required for that touchmonitor to function. If you need to connect this touchmonitor to a dif ferent computer , or if you need to update the to ...

  • Tyco Electronics 3200L - page 20

    Chapter 5 – Mounting Note: For your health and safety , it is strongly recommended that at least two people handle, lift, or move these touchmonitors. T wo handles are provided on the unit’ s back for easier handling. Note: When laying the display face-down (for attaching mounting brackets or stands), protect the glass on the face from scratchi ...

  • Tyco Electronics 3200L - page 21

    Select the desired mounting or ientation from the display’ s On-Screen Display (OSD) Mounting menu for OSD text rotati on and to light the correct logo. The holes located on the sides an d top of the touchmonitor case are for ventilation. Do not block or insert anything inside the ventilation slots Rear VESA Mount For the 32” model: A four-hole ...

  • Tyco Electronics 3200L - page 22

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 22 of 45 Chapter 6 – Operation Power T o turn the touchmonitor on or of f, pr ess the touchmonit or power button once. T o power on the Computer Module, pre ss the touchmonitor power button once. T o power off the Computer Module and touchm onitor , press and hold the touchmonitor ...

  • Tyco Electronics 3200L - page 23

    The APR performance can be customized to better suit your application. Access the “Set APR Preference” window from the Mode tab of the Elo APR driver control panel: Select the usage type best suited for y our application, then press Apply . General : No p articular optimization (default) Best Signature : APR performance optimized for signature ...

  • Tyco Electronics 3200L - page 24

    V ideo Generally , for best performance, the output resolu tion of your video source should match the display’ s native resolution. See the displa y specifications in A ppendix C to find your T ouchmonitor ’s native resolution. Operat ing in other resolutions will degrade video performance. For further information about video resolutions, pleas ...

  • Tyco Electronics 3200L - page 25

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 25 of 45 Using the OSD buttons controls an on-screen graphica l user interface which displays on top of your input video, allowing intuitive adjustm ent of the following display parameters: Parameter A vailable Adjustment Brightness Increase/decrease monitor brightness. Default: max ...

  • Tyco Electronics 3200L - page 26

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 26 of 45 OSD Language Selects which language the OSD informati on is displayed in. The available languages are: English, Fr ench, Italian, German, S p anish, Simplified Chinese, T raditional Chinese, and Japanese. Default: English. Mounting Selects the touchmonitor mounting orient a ...

  • Tyco Electronics 3200L - page 27

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 27 of 45 OSD and Power Lockout s Press and hold the “Menu” and “Up” buttons fo r two seconds to enable/disable the OSD Locking feature. When the OSD Locking is enabl ed, pressing any of the Menu, Up, Down, or Select keys will have no effect on the system. Press and hold the ...

  • Tyco Electronics 3200L - page 28

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 28 of 45 Chapter 7 – T echnical Support If you are experiencing trouble with your touc hmonitor , refer to the following suggestions. If the problem persists, please cont act your loca l dealer or contact Elo T ouchSystems Customer Service. Solutions to Common Problems Problem Sug ...

  • Tyco Electronics 3200L - page 29

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 29 of 45 Appendix A – Native Resolution An LCD panel’ s native resolution is its wid th and height measured in number of pixels. In almost all cases, an image displayed on an LCD monit or will look best when your computer ’s output resolution matches the LCD panel’ s native ...

  • Tyco Electronics 3200L - page 30

    Appendix B Safety & Maintenance Safety T o avoid risk of electric shock, follow all safe ty notices and do not disa ssemble the touchmonitor or Computer Module. They are not user-serviceable. The slots located on the sides and top of the touc hmonitor case are for ventilation. Do not block or insert anything inside the ventilation slots. The to ...

  • Tyco Electronics 3200L - page 31

    Mercury W arning This product consists of devices that may co ntain mercury , which must be recycled or disposed of in accordance with local, state, or federal laws . (Within this system, the backlight lamp s in the monitor display contain mercury .) W aste Electrical & Electronic Equipment Directive (WEEE) This product should not be disposed o ...

  • Tyco Electronics 3200L - page 32

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 32 of 45 Appendix C T echnical Specifications 32” Interactive Digit al Signage T ouchMonitor Available T ouch T echnologies APR Display Active Area 760 mm x 450 mm LCD Panel type 32” TFT Active Matrix Pixel Pitch 0.51075 mm x 0.51075 mm LCD Panel native resolution 1366x768 Contr ...

  • Tyco Electronics 3200L - page 33

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 33 of 45 Audio Input Connector: 3.5mm TRS jack Input Signal Range: 1V rms (0dBV) maximum Internal S peakers: a p air of stereo 10W speakers Headphone Output Connector: 3.5mm TRS jack Headphone Output: capable of delivering 90mW pe r channel continuous RMS power into a 32-ohm load (f ...

  • Tyco Electronics 3200L - page 34

    32” Interactive Digit al Signage T ouchMonitor Dimensions All dimensions in mm User Manual – Interactive Digital Signage SW601 176 Rev A - Page 34 of 45 ...

  • Tyco Electronics 3200L - page 35

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 35 of 45 42” Interactive Digit al Signage T ouchMonitor Available T ouch T echnologies APR Display Active Area 930.24 mm x 523.26 mm LCD Panel type 42” TFT Active Matrix Pixel Pitch 0.4845 mm x 0.4845 mm LCD Panel native resolution 1920 x 1080 Contrast Ratio 3500 typical Brightn ...

  • Tyco Electronics 3200L - page 36

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 36 of 45 Power Input Connector: IEC 60320 C14 Input V olt age Range: 100-240V AC 50/60Hz Power Consumption (touchmonitor Only , full audio volume, 120V/60Hz) ON: ?? W typ, 345 W max SLEEP: typ/max OFF: typ/max Power Consumption (touchmonitor with Computer Module,, 120V/60Hz) ON: ?? ...

  • Tyco Electronics 3200L - page 37

    42” Interactive Digit al Signage T ouchMonitor Dimensions All dimensions in mm User Manual – Interactive Digital Signage SW601 176 Rev A - Page 37 of 45 ...

  • Tyco Electronics 3200L - page 38

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 38 of 45 46” Interactive Digit al Signage T ouchMonitor Available T ouch T echnologies APR Display Active Area 1018.08 mm x 572.67 mm LCD Panel type 46” TFT Active Matrix Pixel Pitch 0.52025 mm x 0.53025 mm LCD Panel native resolution 1920 x 1080 Contrast Ratio 3500 typical Brig ...

  • Tyco Electronics 3200L - page 39

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 39 of 45 Power Input Connector: IEC 60320 C14 Input V olt age Range: 100-240V AC 50/60Hz Power Consumption (touchmonitor Only , 120V/60Hz) ON: typ/ 381W max SLEEP: typ/max OFF: typ/max Power Consumption (touchmonitor with Computer Module,, 120V/60Hz) ON: typ/ 531W max SLEEP: typ/max ...

  • Tyco Electronics 3200L - page 40

    46” Interactive Digit al Signage T ouchMonitor Dimensions All dimensions in mm User Manual – Interactive Digital Signage SW601 176 Rev A - Page 40 of 45 ...

  • Tyco Electronics 3200L - page 41

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 41 of 45 Elo Digit al Signage Computer Module Option 1 Option 2 Available Pro cessors Intel Celeron Dual Core E1500 2.2GHz 512KB L2 Cache Intel Core 2 Duo E8400 3.0GHz 6MB L2 Cache RAM (800MHz min) 1GB DDR2 DIMM on 1 of 1 slot 2GB DDR@ DIMM on 1 of 1 slot Chipset Intel G41 Express I ...

  • Tyco Electronics 3200L - page 42

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 42 of 45 Appendix D - Regulatory Information I. Electrical Safety Information: Compliance is required with respect to the voltage, frequency , and current requirements indicated on the manufacturer ’s label. Connection to a different power sour ce than those specified herein will ...

  • Tyco Electronics 3200L - page 43

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 43 of 45 iii) Reorient the affect ed receiver’s antenna. iv)Plug the digital device into a dif ferent AC outlet so the digital device and the receiver are on different branch circuit s. v) Disconnect and remove any I/O cables that th e digital device does not use.(Unterminated I/O ...

  • Tyco Electronics 3200L - page 44

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 44 of 45 Appendix E – W arranty Information Except as otherwise stated herein, or in an order acknowledgment delivered to Buyer , Seller warrant s to Buyer that the Product shall be free of defect s in materials and workmanship. The warranty for the T ouchMonitors, Computer Module ...

  • Tyco Electronics 3200L - page 45

    User Manual – Interactive Digital Signage SW601 176 Rev A - Page 45 of 45 Check out Elo’ s Website! www .elotouch.com Get the latest... • Product Information • Specifications • News on upcoming events • Press releases • Software drivers • T ouchMonitor Newsletter Getting in T ouch with Elo T o find out more about Elo’ s extensive ...

Manufacturer Tyco Electronics Category Car Video System

Documents that we receive from a manufacturer of a Tyco Electronics 3200L can be divided into several groups. They are, among others:
- Tyco Electronics technical drawings
- 3200L manuals
- Tyco Electronics product data sheets
- information booklets
- or energy labels Tyco Electronics 3200L
All of them are important, but the most important information from the point of view of use of the device are in the user manual Tyco Electronics 3200L.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Tyco Electronics 3200L, service manual, brief instructions and user manuals Tyco Electronics 3200L. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Tyco Electronics 3200L.

A complete manual for the device Tyco Electronics 3200L, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Tyco Electronics 3200L by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Tyco Electronics 3200L.

A complete Tyco Electronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Tyco Electronics 3200L - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Tyco Electronics 3200L, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Tyco Electronics 3200L, that we can find in the current document
3. Tips how to use the basic functions of the device Tyco Electronics 3200L - which should help us in our first steps of using Tyco Electronics 3200L
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Tyco Electronics 3200L
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Tyco Electronics 3200L in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Tyco Electronics 3200L?

Use the form below

If you did not solve your problem by using a manual Tyco Electronics 3200L, ask a question using the form below. If a user had a similar problem with Tyco Electronics 3200L it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)