English dropdown-ico

Manual GTO 10

40 pages 7.22 mb
Download

Go to site of 40

Summary
  • GTO 10 - page 1

    Installation Manual f or the SINGLE Gate Opera tor S y stem PROFESSIONAL INST ALLA TION REC OMMENDED! W ARNING! This equipment is similar to other ga te or door equipment and meets or ex ceeds Under writers Laboratory Standard 325 (UL 325). How ever , gat e equipment has hazards associated with its use and ther efore by installing this product the ...

  • GTO 10 - page 2

    Class Rating The GT O 4000XLS G ate Operat or is intended for use with v ehicular swing gates in single family residential applications . The operator is syst em certied to be in compliance with UL 325, current edition, as of publication date . V ehicular Gate Operator Class Ca tegories: Residential V ehicular Gate Operat or — Class I : A vehi ...

  • GTO 10 - page 3

    T able of C ont ents Class Rating ...................................................................................................................... inside cov er Please Read This F irst ..........................................................................................................................ii Impor tant Safety Instruc tions... ...

  • GTO 10 - page 4

    ii GT O 4000XLS Instruction M anual © 01.10.12 Thank you f or purchasing a GTO/A CCESS SYSTEMS 4000XLS. When correctly installed and properly used , your 4000XLS operat or will give y ou many y ears of reliable service. Please read the f ollowing information to ensure y ou have the c orrect system for y our par ticular needs. This manual will enab ...

  • GTO 10 - page 5

    GT O 4000XLS Instruction M anual © 01.10.12 iii IMPORT ANT SAFETY INSTR UC TIONS Because automatic gate operators produce high levels of force, consumers need to know the potential hazards associated with improperly designed, installed, and maintained automated gate operator systems. Keep in mind that the gate operator is just one component of the ...

  • GTO 10 - page 6

    iv GT O 4000XLS Instruction M anual © 01.10.12 IMPORT ANT SAFETY INSTR UC TIONS F or The Consumer W ARNING: T o reduce the risk of injury or death: 1. READ AND FOLL OW ALL INSTRUCTIONS. Failure to meet the requirements set forth in the instruction manual could cause severe injury or death, for which the manufacturer cannot be held responsible. 2. ...

  • GTO 10 - page 7

    GT O 4000XLS Instruction M anual © 01.10.12 v IMPORT ANT SAFETY INSTRUCTIONS II. During Installation 1. Install the gate operator on the inside of the property and fence line. DO NOT install an operator on the outside of the gate where the public has access to it. 2. Be careful with moving parts and avoid close proximity to areas where fingers or ...

  • GTO 10 - page 8

    vi GT O 4000XLS Instruction M anual © 01.10.12 IMPORT ANT SAFETY INSTRUCTIONS 7. T o operate this equipment safely , YOU must know how to disconnect the operator for manual gate operation (page iii). If you have read the instructions and still do not understand how to disconnect the operator , contact the GTO Service Department. 8. Disconnect the ...

  • GTO 10 - page 9

    GT O 4000XLS Instruction M anual © 01.10.12 vii IMPORT ANT SAFETY INSTRUCTIONS Secondary Means of Protection Against Entrapment As specified by Gate Operator Safety Standard, UL 325 (30A.1.1), automatic gate operators shall have an inherent entrapment sensing system, and shall have provisions for , or be supplied with, at least one independent se ...

  • GTO 10 - page 10

    viii GT O 4000XLS Instruction M anual © 01.10.12 IMPORT ANT SAFETY INSTRUCTIONS ! W arning signs (2 enclosed) to be installed on each side of the gate (3–5 feet above the bottom of the gate). Maximum Gate: 1000 lb. (453.5 kg); 20 ft. (6.1 m) V oltage: 12 Vdc; Frequency: 0 Hz; P ower: 60 W Class I V ehicular Swing Gate Operator . Serial Number: X ...

  • GTO 10 - page 11

    GT O 4000XLS Instruction M anual © 01.10.12 1 T echnical Sp ecications GT O/AC CESS SYSTEMS 4000XLS A UT OMA TIC GA TE OPER A TOR DRIVE  • Lowfrictionscrewdrive(linearactuator)ra tedfor-5ºFto+160ºF(-21ºCt o+71ºC).UseofGTObatt er yheaterF M316 (Not solar compatib ...

  • GTO 10 - page 12

    2 GT O 4000XLS Instruction M anual © 01.10.12 Befor e Y ou B egin... 1. Determine Charging Option f or Battery: T ransf ormer OR S olar NEVER USE TRANSFORMER AND SOLAR P ANEL(S) A T THE SAME TIME. It will damage the control board . IMPORT ANT :  • The4000XLS’ 12voltbatter ymustbechargedbyeitherc onnecting ...

  • GTO 10 - page 13

    GT O 4000XLS Instruction M anual © 01.10.12 3 2. Check Direction of G ate S wing The 4000XLS is designed f or PULL - T O- OPEN installations. PUSH- T O- OPEN installations requir e a Push- T o -Open Bracket [R4KPT O]. Please r efer to specic P ush- T o - Open Installation Information on page 21. 4. Gate Grounding • Shor ter cable is better , ...

  • GTO 10 - page 14

    4 GT O 4000XLS Instruction M anual © 01.10.12 4. 4000XLS P ar ts List BRACKET BO X - HB4000 HARDW ARE BAG - H401P Master Oper ator Arm (1) PR O4000ARMXLS Customer Support Car d (1) ® E-Z GATE OPENER Gate Br acket (1) P ost Pivot Br acket (1) P ost Bracket (1) Closed P osition Stop Plate (1) Hairpin Clip (2) 3/8" x 3-1/2" Clevis Pin (1) ...

  • GTO 10 - page 15

    GT O 4000XLS Instruction M anual © 01.10.12 5 T ransformer (1) Battery (1) Control Box (1) Warning Signs (2) GTO T ransmitter(1) 1. KEEP CLEAR! Gate may move at any time. 2. Do not allow children to operate gate or play in gate area. 3. This gate is for vehicles only. P edestrians must use a separate entrance. Moving Gate Can Cause Injury Or Death ...

  • GTO 10 - page 16

    6 GT O 4000XLS Instruction M anual © 01.10.12 7. Installation Overview Pull- T o- Open Gates (Gat e Opens into the Property) The diagram sho wn below is an example of a P ull- T o- Open installation on a chain link fence and single gate . Mounting the operator on a masonry column requires special pr ocedures; see C olumn Installation Information o ...

  • GTO 10 - page 17

    GT O 4000XLS Instruction M anual © 01.10.12 7 Step 1 Close the gate and place y our level against the horizontal cross member . P osition the level so that the t op should be in the center of the cr oss member and overlaps the post. Scribe a line across the cross member and post . Y ou will use this line to help determine position of post and gate ...

  • GTO 10 - page 18

    8 GT O 4000XLS Instruction M anual © 01.10.12 Step 5 P osition the operator r ear mount between post pivot br acket. Place a 1 / 2 ” bushing above the rear mount and a 3 / 16 ” bushing under the rear mount. Alig n the hole in rear mount, bushings and post pivot bracket and secur e with the 3 1 / 2 ” clevis pin and hair pin clip . Step 6 Plac ...

  • GTO 10 - page 19

    GT O 4000XLS Instruction M anual © 01.10.12 9 Gate in the CL OSED POSITION Pinch Area 2" minimum MAX 22" Clamp Level Operator Fence P ost Clevis Pin, Bushing, and Hairpin Clip Gate In Open P osition LEVEL horizontal cross member Mark cross member through middle of gate bracket slots and drill 1/2" holes Round T ube & Chain Link ...

  • GTO 10 - page 20

    10 GT O 4000XLS Instruction M anual © 01.10.12 Install Closed P osition Stop Plate The closed position stop plat e helps to stabilize the gat e leaf in the closed position. T o fur ther enhance the stability and security of your gate, install the optional GT O Aut omatic Gate Lock [FM144] Step 11 Remove hairpin, clevis pin, and 3 / 16 ” bushing ...

  • GTO 10 - page 21

    GT O 4000XLS Instruction M anual © 01.10.12 11 Mount the C ontr ol Bo x and Receiv er Use mounting holes and screws provided to mount control box to a secure surface. GRN CO MC OM CYCLE CLOSE SAFE TY SHADOW LOOP CLOSE EDGE OPEN EDGE EXIT OPEN BLK RECEIVER RED 25 FUSE BA TT + BA TT - 1 2 3 4 ON DI P ST AT US LEARN RM T RECEIVE R LEAR N MAST LIMIT L ...

  • GTO 10 - page 22

    12 GT O 4000XLS Instruction M anual © 01.10.12 Step 1 Loosen sealing nut on strain r elief hub at bottom of c ontrol box. Insert power cable into contr ol box thr ough strain relief . Thread appro ximately 6” of the power cable into the control bo x and retighten sealing nut until the pow er cable locks into place . Step 2 Inser t the stripped p ...

  • GTO 10 - page 23

    GT O 4000XLS Instruction M anual © 01.10.12 13 IMPORT ANT :  • Thetransf ormerisdesignedandintendedf orindooruse.Ifthetransf ormercanonlybe plugged into an outside electrical outlet, a weatherproof c over/housing (a vailable at local electrical supply stores) must be used.  • Theonly? ...

  • GTO 10 - page 24

    14 GT O 4000XLS Instruction M anual © 01.10.12 Step 5 Strip the ends of the low voltage wir e and twist tightly . Attach these ends to the 18 V AC OR SOLAR terminals located on the POWER INPUTS terminal block. Be certain not to let the exposed wires touch each other! Inser t one transformer wire int o an 18 V AC OR SOLAR terminal. Insert the other ...

  • GTO 10 - page 25

    GT O 4000XLS Instruction M anual © 01.10.12 15 RED wire to POSITIVE ( + ) terminal BLACK wire to NEGATIVE ( – ) terminal RED BLACK Step 2 IMPORT ANT: C onnec t the BLACK battery wire to the NEGA TIVE (–) batteryterminal.ConnecttheREDbatterywiretothePOSITIVE(+) terminal. Rev erse connec tion of battery wires wil ...

  • GTO 10 - page 26

    16 GT O 4000XLS Instruction M anual © 01.10.12 1 2 3 4 ON DIP ST A TUS LEARN RMT LEARN MAST LIMIT LEARN 2ND LIMIT S3 S4 S2 OFF SOFT ST ART OFF W ARNING OFF OPEN PULL 2ND OPEN DL Y . MODE1 OFF MODE2 OFF ON ON PUSH SIMUL T . ON ON 120 MIN MAX A UT O CL OSE TIME ST ALL FORCE Auto Close Time Potentiometer A djust the Stall F orc e Setting The Stall F ...

  • GTO 10 - page 27

    GT O 4000XLS Instruction M anual © 01.10.12 17 Pr ogram Y our Personal T ransmitter Setting All GT O transmitters are set to a standard c ode at the factor y and are ready to oper ate your GT O gate operat or . F or your safety and security , we strongly r ecommend that you replac e the factor y setting with your own personal setting. F ollow the ...

  • GTO 10 - page 28

    18 GT O 4000XLS Instruction M anual © 01.10.12 DIP S witches DIP Switch Settings (MODES) DIP Switch #1: Soft Start/Stop ON– Soft star t enabled (factor y preset). OFF– Soft star t disabled. T he Soft Star t/Stop featur e slowly star ts the gate as it begins t o open and slows the gat e as it comes to the closed position. This sav es wear and t ...

  • GTO 10 - page 29

    GT O 4000XLS Instruction M anual © 01.10.12 19 C onnec ting Ac cessories Input Connections  • Allcontrolinputsaredry- contact,normallyopen,inputs.DONO Tapplyex ternalvoltagesour cesto these inputs.  • AllinputsareconnectedwithrespecttoCOMMONt erminal.  • T ...

  • GTO 10 - page 30

    20 GT O 4000XLS Instruction M anual © 01.10.12 GRN CO MC OM CYCLE CLOSE SAFETY SHADOW LOOP CLOSE EDGE OPEN EDGE EXIT OPEN BLK RECEIVER RED AL M ORG LU E BRN RED STER INPUTS BLK STER CABL E CO NTROL INPUT S 1 2 3 4 5 6 7 SOLAR or 18 VA C W GRN LO CK PWR AU X RL Y TRANSF LO CK PW R AU X RL Y Photo Beams Loop Detector Push Button Control Automatic Ga ...

  • GTO 10 - page 31

    GT O 4000XLS Instruction M anual © 01.10.12 21 P ush- T o - O pen Installation Inf ormation Swinging ga tes shall not open into public ac cess areas! A “ Push-to-Open ” gate opens out from the pr oper ty (operator arm extends to open the gate). A P ush- T o - Open installation requir es the purchase of a P ush- T o- Open Bracket [R4KPT O]. In ...

  • GTO 10 - page 32

    22 GT O 4000XLS Instruction M anual © 01.10.12 Set Con trol Board f or Push- T o -O pen Make sure the contr ol box po wer switch is OFF . Use a small screwdriv er to mov e the Number 3 DIP switch from the factor y setting (OFF / Pull- T o- Open) to ON for P ush- T o- Open. T urn power switch ON. The control board is no w congured to push the ga ...

  • GTO 10 - page 33

    GT O 4000XLS Instruction M anual © 01.10.12 23 If this operator will be used with gates that ar e mounted on masonry , brick, or rock (etc.) columns , read the following car efully before proceeding A. The simplest solution is to install the operat or in a push-to- open conguration. The minimum clearance is easier to achiev e and clearance is n ...

  • GTO 10 - page 34

    24 GT O 4000XLS Instruction M anual © 01.10.12 T roubleshooting Guide If your gate operat or does not function properly after it is installed, use this guide befor e calling the GT O Ser vice Depar tment. Generation 3 A udible F eedback SY MPT OM DIA GNOSIS CHECK: 1 shor t beep upon power up Circuit Board P ower ed Up & Ready •NormalOp ...

  • GTO 10 - page 35

    GT O 4000XLS Instruction M anual © 01.10.12 25 Generation 3 V isual F eedback SY MPT OM DIA GNOSIS CHECK: Status (clear)1 blink Cycle T erminal Shor ted •Disconnectthepushbutton,keypad,inter comkeypad ,or any other acc essor y wired to this t erminal. • T r ytheremote.Iftheremotew or ks,then? ...

  • GTO 10 - page 36

    26 GT O 4000XLS Instruction M anual © 01.10.12 If your GT O 4000XLS Gate Operator is not oper ating properly , please follow the st eps below: 1. First use the pr ocedures f ound in the T roubleshooting Guide (see page 24). 2. Use the 24/7 T roubleshooting Wizard a t http://suppor t.gtoinc .com. 3. I f you ar e unable to solve the pr oblem, call t ...

  • GTO 10 - page 37

    GT O 4000XLS Instruction M anual © 01.10.12 27 A cc essories f or 4000XLS POWERING A C CESSORIES Low V oltage Wire [RB509] The 16 gauge, str anded, dual conductor low v oltage Wire is f or connecting the AC power edtransf ormer ,solarpanelorwiredaccessoriestothesy stem ’ scontrolboard . This specially designed ...

  • GTO 10 - page 38

    28 GT O 4000XLS Instruction M anual © 01.10.12 Residential Wireless En tr y Interc om [F3100MBC] Designed for added security to your aut omated gate with the ability to “ speak to ” and “ screen ” visitors safely fr om inside your home . Ideal for securing gat e entrances while providing c ontrolled acc ess. Gooseneck Pedestal [F100/F110] ...

  • GTO 10 - page 39

    GT O 4000XLS Instruction M anual © 01.10.12 29 ADDITIONAL A C CESSORIES Photo Beams [R4222] Primary “through beam ” photo beam device . Pr ovides “non-contact ” entrapment protection. Pin L ock [FM345] Use as a substitute f or the clevis pin at the front moun t of the PRO-SW4000XLS to preven t theft of the operator .  • PinLock? ...

  • GTO 10 - page 40

    3121 Har tseld Road • T allahassee, F lorida, USA 32303 (850) 575-0176 • F ax (850) 575-8912 W eb site w w w .gtoacc ess.com 24/7 T roubleshooting W izard: http://suppor t.gtoinc.c om PROFESSIONAL RESIDENTIAL ACCESS SYSTEMS ...

Manufacturer GTO Category Safety Gate

Documents that we receive from a manufacturer of a GTO 10 can be divided into several groups. They are, among others:
- GTO technical drawings
- 10 manuals
- GTO product data sheets
- information booklets
- or energy labels GTO 10
All of them are important, but the most important information from the point of view of use of the device are in the user manual GTO 10.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals GTO 10, service manual, brief instructions and user manuals GTO 10. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product GTO 10.

Similar manuals

A complete manual for the device GTO 10, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use GTO 10 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of GTO 10.

A complete GTO manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual GTO 10 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the GTO 10, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the GTO 10, that we can find in the current document
3. Tips how to use the basic functions of the device GTO 10 - which should help us in our first steps of using GTO 10
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with GTO 10
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of GTO 10 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning GTO 10?

Use the form below

If you did not solve your problem by using a manual GTO 10, ask a question using the form below. If a user had a similar problem with GTO 10 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)