English dropdown-ico

Manual Winegard SK-7002

12 pages 0.83 mb
Download

Go to site of 12

Summary
  • Winegard SK-7002 - page 1

    1 888 554 -S TA R C o m p a n y A SH AW ST A R C HOIC E TRAV’LER ® Automatic Multi-Satellite TV Antenna Model SK-7002 INSTALLATION MANUAL Winegard Company • 3000 Kirkwood St. • Burlington, IA 52601-2000 319/754-0600 • FAX 319/754-0787 • www.winegard.com Printed in U.S.A. © Winegard Company 2008 2452159 Rev . 1/10 WINEG ARD ® SK-7002 ...

  • Winegard SK-7002 - page 2

    Congratulations! Y ou have selected the Winegard ® TRA V’LER Automatic Multi-Satellite TV Antenna. The TRA V’LER antenna will deliver the ability to view both SHA W DIRECT satellites at the same time with unmatched signal strength, the lowest travel height on the market, maximum HD capabilities and easy to use func- tionality – just like you ...

  • Winegard SK-7002 - page 3

    Once you have checked for this: 1. Choose a location on the roof of the RV that will allow the dish to raise and rotate without interfer- ence from other roof mounted equipment. The TRA V’LER antenna may only be mounted parallel to the centerline of the coach. 2. The minimum roof space required for the TRA V’LER antenna is 46” L x 38” W . a ...

  • Winegard SK-7002 - page 4

    NOTE: Anything in the striped area will interfere with the operation of the TRA V’LER antenna and may cause damage to the object or the TRA V’LER antenna. TRA V’LER Mount Installation V erify that the “FRONT” of the transition plate is facing the front of the vehicle, then place the TRA V’LER antenna mount on the roof where you plan to ...

  • Winegard SK-7002 - page 5

    Run a solid bead of sealant around the transition plate, making sure to cover each screw head. Be careful not to get any sealant above the lip of the transition plate. See diagram of transition plate. Cable Entry Plate Installation: Decide the best location for the cables to enter the vehicle. Y ou will need to run: A coax directly to each receiver ...

  • Winegard SK-7002 - page 6

    Cable installation: Connect the control cable and power cable to the back of the TRA V’LER Interface box as shown below . Note: For cable runs longer than 25’ an extension may be purchased. Do not exceed 50’ of cable. Attach the TRA V’LER control cable to the TRA V’LER Interface Box, as shown in Figure 5A. Attach the output cable from the ...

  • Winegard SK-7002 - page 7

    A. Press [ENTER] the TRA V’LER will return to the “Installation Menu” OR B. Press [POWER] the TRA V’LER will stow and turn “OFF” (Restart at Step 1). Refer to the SKA-722 Manual for instructions on how to install the Reector and Bracket. Manual: 1. Press [POWER] and hold for 2 seconds to turn “ON” the TRA V’LER Interface Box. W ...

  • Winegard SK-7002 - page 8

    W ARNING: Pay attention to these Pinch Points as the antenna raises! Usingthe(4)boltsandnutsprovided,attachthereectortothemountingbracket. Press [ POWER ] to lower the antenna to the travel position. Note: The nuts securing the dish should be tightened to 6-8 lb.ft. 8 FIGURE 6 FIGURE 7 Pinch Points Pinch ...

  • Winegard SK-7002 - page 9

    Appendix: Making the Right Connection with Hex Connectors Making a coaxial cable connection is critical. If you have the basic technique right you can modify it to your own personal taste. Whether you use a knife, stripping tool or diagonal cutter , the important thing is to make a good clean cut. A hex crimping tool is required for hex connectors, ...

  • Winegard SK-7002 - page 10

    10 INSTALLATION ! DO NOT paint this antenna! Painting the TRAV’LER antenna will void your warranty. WINEGARD MOBILE PRODUCTS LIMITED W ARRANTY (2 YEARS P ARTS; 1 YEAR LABOR) Winegard Company warrants this product against defects in materials or workmanship for a period of two (2) years from the date of original purchase. During year one (1) of su ...

  • Winegard SK-7002 - page 11

    11 INSTALLATION ...

  • Winegard SK-7002 - page 12

    Winegard Company • 3000 Kirkwood St. • Burlington, IA 52601-2000 319/754-0600 • FAX 319/754-0787 • www.winegard.com Printed in U.S.A. © Winegard Company 2008 2452159 Rev . 1/10 ...

Manufacturer Winegard Category Satellite TV System

Documents that we receive from a manufacturer of a Winegard SK-7002 can be divided into several groups. They are, among others:
- Winegard technical drawings
- SK-7002 manuals
- Winegard product data sheets
- information booklets
- or energy labels Winegard SK-7002
All of them are important, but the most important information from the point of view of use of the device are in the user manual Winegard SK-7002.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Winegard SK-7002, service manual, brief instructions and user manuals Winegard SK-7002. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Winegard SK-7002.

Similar manuals

A complete manual for the device Winegard SK-7002, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Winegard SK-7002 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Winegard SK-7002.

A complete Winegard manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Winegard SK-7002 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Winegard SK-7002, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Winegard SK-7002, that we can find in the current document
3. Tips how to use the basic functions of the device Winegard SK-7002 - which should help us in our first steps of using Winegard SK-7002
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Winegard SK-7002
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Winegard SK-7002 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Winegard SK-7002?

Use the form below

If you did not solve your problem by using a manual Winegard SK-7002, ask a question using the form below. If a user had a similar problem with Winegard SK-7002 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)