English dropdown-ico

Manual SkyLink TD-434

16 pages 0.47 mb
Download

Go to site of 16

Summary
  • SkyLink TD-434 - page 1

    Model: TD-434 User’ s Manual L CD Delux e Remote 15 01 : FR ...

  • SkyLink TD-434 - page 2

    1 CONTENT INTRODUCTION................................................................................................... POWER UP ......................................................................................................... SET THE CLOCK .................................................................................................. ...

  • SkyLink TD-434 - page 3

    2 INTRODUCTION SkylinkHome TM LCD Deluxe Remote allows you to wirelessly operate SkylinkHome TM various wireless receiver controls. This LCD Deluxe Remote provides features such as: - Zone Operation - Scene Operation - Timer Operation You can control various home appliances or lights with this remote control and different receiver units. Applicatio ...

  • SkyLink TD-434 - page 4

    3 POWER UP Insert 2 AAA batteries to the remote (with the correct polarity as shown), its LCD display will turn on and red LED will ash once. Press the button on the remote, the red LED should ash. The remote is now powered properly. If the LCD display does not turn on or red LED does not ash when button is pressed, refer to Section “Bat ...

  • SkyLink TD-434 - page 5

    4 PROGRAMMING THE LCD DELUXE REMOTE TO RECEIVER CONTROL In order to operate the receiver control with this LCD Deluxe Remote, it must be programmed to the receiver control. The LCD Deluxe Remote can transmit 4 types of command: 1) Individual Operation – Control one light only, i.e. the ceiling light in the family room. 2) Zone Operation – Contr ...

  • SkyLink TD-434 - page 6

    5 PROGRAMMING FOR INDIVIDUAL OPERATION Individual operation allows you to use one of the buttons from 1 to 9 to control one specic light or appliance. To program a remote to the receiver control, a “Learn” code must be transmitted, follow the instructions below to transmit the “Learn” code to the receiver control. You may use the followi ...

  • SkyLink TD-434 - page 7

    6 1. Put the receiver control that you plan to program into programming mode. Refer to the User’s Instructions of that receiver control. 2. During the standby mode, the LCD display will show the current time. Press the [PROG] button once to enter the Individual Programming mode. The Signal icon [ ] and red LED stays on for 15 seconds. 3. Once the ...

  • SkyLink TD-434 - page 8

    7 PROGRAMMING FOR SCENE OPERATION Scene can provide specic brightness of multiple lights with a press of a button, this can create specic atmosphere. The remote provides 9 different scene settings, brightness of light control from 0% [off] to 100% [brightest], i.e. common scenes are morning scene, evening scene, movie scene and etc. To setup ...

  • SkyLink TD-434 - page 9

    8 4. Now the Red LED stays on and the SCENE icon, Signal icon and Settings icon stay on for 15 seconds to allow you to program this scene to the receiver control. 5. Put the receiver control that you plan to program into programming mode. Refer to the User’s Instructions of that receiver control. 6. Once the receiver control is in programming mod ...

  • SkyLink TD-434 - page 10

    9 You may assign a scene to specic receivers with preset brightness to create different atmosphere. Some examples below. Scene No. Scene Name Receiver Control Brightness 1 Evening Family Room Floor Light 30% 1 Evening Family Room Ceiling Light 40% 1 Evening Kitchen Floor Light 30% 2 Movie Kitchen Ceiling Light 30% 2 Movie Family Room Ceiling Lig ...

  • SkyLink TD-434 - page 11

    10 1. Press the [PROG] button 5 times to enter the Timer Programming mode. The PROG icon and TIMER icon will stay on and the Timer number will ash in the LCD display. [show LCD] 2. Press [1 – 9] to select the Timer number you want to setup. 3. The day of the week (e.g. SU) will ash. Select the day you want the timer to be activated by using ...

  • SkyLink TD-434 - page 12

    11 To Assign a Timer: 1. Press TIMER button once to select Timer mode. 2. Press [1 – 9] to select the desired timer, i.e. Enter [1] for Timer 1. 3. Press [PROG] to select between assigning this timer for: a. Individual Light / Device b. Zone c. Scene You can press [PROG] multiple times until the desired setting. 4. Use the Up [2] / Down [8] Butto ...

  • SkyLink TD-434 - page 13

    12 To Activate or Deactivate the Timer: 1. During the standby mode, press [TIMER] once [show LCD]. 2. Press [1 – 9] to select the desired timer, i.e. Enter [1] for Timer 1. 3. Press [TIMER] again to activate or deactivate the timer. If the Timer icon stays on, the timer is activated. If the Timer icon is off, that timer is not activated. BATTERY ...

  • SkyLink TD-434 - page 14

    13 WARRANTY If, within one year from date of purchase, this product should become defective (except battery), due to faulty workmanship or materials, it will be repaired or replaced, without charge. Proof of purchase and a Return Authorization are required. CUSTOMER SERVICE If you would like to - nd out the up-to-date specications - know more ...

  • SkyLink TD-434 - page 15

    14 ...

  • SkyLink TD-434 - page 16

    15 101Z945 ...

Manufacturer SkyLink Category Universal Remote

Documents that we receive from a manufacturer of a SkyLink TD-434 can be divided into several groups. They are, among others:
- SkyLink technical drawings
- TD-434 manuals
- SkyLink product data sheets
- information booklets
- or energy labels SkyLink TD-434
All of them are important, but the most important information from the point of view of use of the device are in the user manual SkyLink TD-434.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals SkyLink TD-434, service manual, brief instructions and user manuals SkyLink TD-434. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product SkyLink TD-434.

Similar manuals

A complete manual for the device SkyLink TD-434, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use SkyLink TD-434 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of SkyLink TD-434.

A complete SkyLink manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual SkyLink TD-434 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the SkyLink TD-434, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the SkyLink TD-434, that we can find in the current document
3. Tips how to use the basic functions of the device SkyLink TD-434 - which should help us in our first steps of using SkyLink TD-434
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with SkyLink TD-434
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of SkyLink TD-434 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning SkyLink TD-434?

Use the form below

If you did not solve your problem by using a manual SkyLink TD-434, ask a question using the form below. If a user had a similar problem with SkyLink TD-434 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)