English dropdown-ico

Manual Extron electronics MAV

72 pages 2.56 mb
Download

Go to site of 72

Summary
  • Extron electronics MAV - page 1

    MA V Series Matrix Switchers 68-353-04 Rev. C Printed in the USA 01 04 ...

  • Extron electronics MAV - page 2

    This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product's enclosure that may present a risk of electric shock. Caution Read Instructions ? ...

  • Extron electronics MAV - page 3

    QS-1 Quick Start — MA V Series Switchers Installation Step 1 Mount the switcher in a rack. Step 2 T urn off power to the input and output devices, and r emove the power cords fr om them. Step 3 Cable the switcher for HDTV/component video , S-video, or composite video input and output ( 3 ). Step 4 MA V 168/1616 : Cable audio models for stereo aud ...

  • Extron electronics MAV - page 4

    Quick Start — MA V Series Switchers, cont’d QS-2 Fr ont Panel Controls Input and output buttons and LEDs select and identify inputs and outputs. Input buttons also select presets. On audio models, the output LEDs also display the audio level of the selected input. Enter button saves changes when you change the configuration. Preset button saves ...

  • Extron electronics MAV - page 5

    i MAV Series Switchers • Table of Contents T able of Contents Chapter 1 • Introduction ....................................................................................................... 1-1 Featur es ............................................................................................................................... .... 1-5 MA V ...

  • Extron electronics MAV - page 6

    ii MAV Series Switchers • Table of Contents T able of Contents, cont’d Worksheets .......................................................................................................................... 3-17 W orksheet example 1: System equipment .................................................................... 3-17 W orksheet example 2: D ...

  • Extron electronics MAV - page 7

    iii MAV Series Switchers • Table of Contents Appendix B • Reference Information ........................................................................... B-1 Hardware Pr ocedures ........................................................................................................ B-2 Opening the sw itcher .................................. ...

  • Extron electronics MAV - page 8

    iv MAV Series Switchers • Table of Contents T able of Contents, cont’d 68-353-04 Rev. C Printed in the USA 01 0 4 All trademarks mentioned in this manual ar e the pr operties of their respective owners. ...

  • Extron electronics MAV - page 9

    MA V Series Switchers 1 Chapter One Intr oduction Features ...

  • Extron electronics MAV - page 10

    Introduction, cont’d MAV Series Switchers • Introduction 1-2 Introduction The Extron MA V Series switchers are broadcast quality matrix switchers that distribute any video and/or audio input to any combination of outputs. The MA V switchers can route multiple input/output configurations simultaneously . There are four matrix sizes available, ea ...

  • Extron electronics MAV - page 11

    1-3 MAV Series Switchers • Introduction DVD Player 16 Inputs - 16 Outputs Monitor MAV 1616 Component Figure 1-1 — T ypical MA V 1616 component matrix switcher application DVD Player Monitor 16 Inputs - 16 Outputs MAV 1616 S-video Figure 1-2 — T ypical MA V 1616 S-video matrix switcher application ...

  • Extron electronics MAV - page 12

    Introduction, cont’d MAV Series Switchers • Introduction 1-4 DVD Players Stereo Audio VCR VCR Laserdisc Player Security Cameras Video Camera CRT Projector CRT Projector Monitor Monitor LCD Projector VCR MAV 1616 Series Switcher RS-232 Control Figure 1-3 — T ypical MA V 1616 composite matrix switcher application DVD players Stereo audio VCR La ...

  • Extron electronics MAV - page 13

    1-5 MAV Series Switchers • Introduction Features MA V 128 RCA model Inputs — These switchers of fer 12 NTSC 3.58, NTSC 4.43, P AL, and SECAM composite video inputs on BNC connectors. Unbalanced stereo audio is input on left and right RCA connectors. Outputs — 4 or 8 composite video outputs are available on BNC connectors. Unbalanced stereo au ...

  • Extron electronics MAV - page 14

    Introduction, cont’d MAV Series Switchers • Introduction 1-6 MA V 168/1616 video models Inputs — These switchers of fer 16 RGsB, RsGsBs, HDTV , component video, S-video, or NTSC 3.58, NTSC 4.43, P AL, and SECAM composite video inputs on BNC connectors (video models). Stereo audio can be balanced or unbalanced, on 3.5 mm, 5-pole captive screw ...

  • Extron electronics MAV - page 15

    1-7 MAV Series Switchers • Introduction Labeling — Extron’s label software ships with every Extron matrix switcher . Y ou can create labels to place alongside the fr ont panel I/O buttons, with names, alphanumeric characters, or color bitmaps for easy and intuitive input and output selection. Alternatively , labels can be made with any Br oth ...

  • Extron electronics MAV - page 16

    Introduction, cont’d MAV Series Switchers • Introduction 1-8 ...

  • Extron electronics MAV - page 17

    MA V Series Switchers 2 Chapter T wo Installation Installation Overview Mounting the Switcher Cabling and Rear Panel V iews ...

  • Extron electronics MAV - page 18

    Installation, cont’d MAV Series Switchers • Installation 2-2 Installation Installation Overview T o install a MA V Series switcher , do the following: 1 If desir ed, mount the switcher in a rack (see Mounting the switcher below). 2 T urn off power to the input and output devices, and unplug the power cables fr om them. 3 Attach the input and ou ...

  • Extron electronics MAV - page 19

    2-3 MAV Series Switchers • Installation R-Y INPUTS Y INPUTS B-Y INPUTS R-Y OUTPUTS Y OUTPUTS B-Y OUTPUTS 7 9 11 13 15 81 0 1 2 135 246 1 4 1 6 7 9 11 13 15 81 0 1 2 135 246 1 4 1 6 7 9 11 13 15 81 0 1 2 135 246 1 4 1 6 7 9 11 13 15 81 0 1 2 135 246 1 4 1 6 7 9 11 13 15 81 0 1 2 135 246 1 4 1 6 7 9 11 13 15 81 0 1 2 135 246 1 4 1 6 1 6 7 2 3 5 4 F ...

  • Extron electronics MAV - page 20

    Installation, cont’d MAV Series Switchers • Installation 2-4 1 6 5 4 2 3 7 Figure 2-5 — MA V 128 RCA matrix switcher Power connection 1 AC power connector — Plug a standard IEC power cord into this connector to connect the switcher to a 100V AC to 240V AC, 50 or 60 Hz power sourc e. V ideo input and output connections (video models only) Al ...

  • Extron electronics MAV - page 21

    2-5 MAV Series Switchers • Installation Audio input and output connections (audio models only) The captive screw connector can easily be inadvertently plugged partially into one receptacle and partially into an adjacent receptacle. This misconnection could damage the audio output circuits. Ensure that the captive screw connector is plugged into t ...

  • Extron electronics MAV - page 22

    Installation, cont’d MAV Series Switchers • Installation 2-6 Unbalanced Output Tip See warning Sleeve Tip See warning Balanced Output Tip Ring Sleeve (s) Tip Ring Figure 2-8 — Captive scr ew connector wiring for audio output Connect the sleeve to ground (Gnd). Connecting the sleeve to a negative (-) terminal will damage the audio output circu ...

  • Extron electronics MAV - page 23

    2-7 MAV Series Switchers • Installation Timing source MA V s witcher OUT T o next device Figure 2-9 — Simple external sync connection example Figure 2-10 shows another configuration, in which the timing source passes through three video cameras and a video scan converter befor e connecting to the switcher . This type of video camera is capable ...

  • Extron electronics MAV - page 24

    Installation, cont’d MAV Series Switchers • Installation 2-8 1.2A MAX 100-240 VA C 50/60 Hz ANAHEIM, CA INPUTS INPUTS OUTPUTS INPUTS OUTPUTS OUT IN EXT SYNC REMOTE RS232/ RS422 13579 1 1 1 3 1 5 2 4 6 8 10 12 14 16 1 3 5 7 9 1 11 31 5 2 4 6 8 10 12 14 16 12 34 5 6 78 OUTPUTS 91 0 1 1 1 2 13 14 15 16 Figure 2-11 — MA V 168 composite video matr ...

  • Extron electronics MAV - page 25

    MA V Series Switchers 3 Chapter Thr ee Operation Front Panel Controls and Indicators Front Panel Operations T roubleshooting W orksheets ...

  • Extron electronics MAV - page 26

    Operation, cont’d MAV Series Switchers • Operation 3-2 Operation Front Panel Contr ols and Indicators The front panel controls (figure 3-1 and figur e 3-2) are gr ouped into two sets. The input and output buttons and LED indicators are grouped on the left side of the control panel. The control buttons and I/O selection buttons and indicators ar ...

  • Extron electronics MAV - page 27

    3-3 MAV Series Switchers • Operation 1 Input 1 through 16 buttons and LEDs — The input buttons have two independent functions: to select and identify an input and to select or identify a preset. A more detailed explanation of the two functions is included in Front panel operations , beginning on pages 3-4. 2 Output 1 through 16 buttons and LEDs ...

  • Extron electronics MAV - page 28

    Operation, cont’d MAV Series Switchers • Operation 3-4 8 Audio button and LED — The Audio button selects and deselects audio for a configuration that is being created or viewed. The Audio LED lights to indicate that the audio configuration follows the video configuration. The Audio LED blinks to indicate that the audio configuration is broken ...

  • Extron electronics MAV - page 29

    3-5 MAV Series Switchers • Operation The current configuration and all presets ar e saved in non-volatile memory . When power is applied, the last current configuration is retrieved. The pr evious pr esets remain intact. If an error occurs during the self-test, the switcher locks up and will not operate. If your switcher locks up on power-up, cal ...

  • Extron electronics MAV - page 30

    Operation, cont’d MAV Series Switchers • Operation 3-6 D Press and release the output 3, output 4, and output 8 buttons. The output 3, output 4, and output 8 LEDs blink to indicate a tentative tie. The entire set of ties can be canceled at this point by pressing and releasing the Esc button. The Esc LED flashes once. 1 1 2 2 3 3 4 4 5 5 6 ENTER ...

  • Extron electronics MAV - page 31

    3-7 MAV Series Switchers • Operation E Press and release the Enter button. The input and output LEDs turn of f. The current configuration is now video input 5 tied to video output 1, output 3, output 4, and output 8; and audio input 5 tied to audio output 3, output 4, and output 8. Example 3: Removing a tie from a set of video and audio ties See ...

  • Extron electronics MAV - page 32

    Operation, cont’d MAV Series Switchers • Operation 3-8 V iewing a configuration The current configuration can be viewed using the front panel buttons. The view- only mode prevents inadvertent changes to the current configuration. V iew-only mode also provides a way to mute video and audio outputs (see Muting and unmuting video and/or audio in t ...

  • Extron electronics MAV - page 33

    3-9 MAV Series Switchers • Operation 1 1 2 2 3 3 4 4 5 5 6 INPUTS ENTER OUTPUTS 6 7 7 8 9 10 11 PRESET VIEW ESC VIDEO AUDIO 12 91 0 1 1 1 2 8 CONTROL I/O 13 13 14 14 15 15 16 16 C 27 6 5 VIEW B VIDEO AUDIO C ESC A F LED key: = off , = on, = flash once F Press Press Press Press Figure 3-8 — Example 4: Viewing the curr ent configuration D Press a ...

  • Extron electronics MAV - page 34

    Operation, cont’d MAV Series Switchers • Operation 3-10 1 1 2 2 3 3 4 4 5 5 6 INPUTS ENTER OUTPUTS 6 7 7 8 9 10 11 PRESET VIEW ESC VIDEO AUDIO 12 91 0 1 1 1 2 8 CONTROL I/O 13 13 14 14 15 15 16 16 VIDEO E 8 3 AUDIO E LED key: = off , = on Press Figure 3-10 — Example 4, step E: Viewing the current configuration, audio only F Press and release ...

  • Extron electronics MAV - page 35

    3-11 MAV Series Switchers • Operation 2. When you enter view-only mode, the output LEDs turn on for all outputs without ties. 3. When you mute video, the mute command mutes all video planes. 4. Mutes are not saved to non-volatile memory. When power is r emoved and restor ed, the mute settings ar e lost. Example 5: Muting and unmuting an output Se ...

  • Extron electronics MAV - page 36

    Operation, cont’d MAV Series Switchers • Operation 3-12 Using pr esets The current configuration (configuration 0) can be saved as a preset in any one of 16 pr eset memory addresses. 1. Only the audio and video ties are stor ed and recalled; audio gain settings are not saved, and they do not change when a preset is r ecalled. 2. P resets cannot ...

  • Extron electronics MAV - page 37

    3-13 MAV Series Switchers • Operation A Press and release the Esc button. The Esc LED flashes once. B Press and release the Pr eset button. The Preset LED lights. C Press and release the input 1 button. The input 1 LED lights for approximately 2 seconds and turns off. The Pr eset LED turns of f. The configuration stored in memory location 1 is no ...

  • Extron electronics MAV - page 38

    Operation, cont’d MAV Series Switchers • Operation 3-14 Example 8: Viewing and adjusting an audio level See figure 3-15 and figure 3-17 and the following steps for an example of viewing and adjusting the audio level. Audio gain and attenuation is displayed differ ently on the MA V 128 RCA (see the table below right) fr om the display on the MA ...

  • Extron electronics MAV - page 39

    3-15 MAV Series Switchers • Operation 1 1 2 2 3 3 4 4 5 5 6 INPUTS ENTER OUTPUTS 6 7 7 8 9 10 11 PRESET VIEW ESC VIDEO AUDIO 12 8 CONTROL I/O C C 5 LED key: = off (v alue 0 dB), = blinking (value 1dB), = on (value 2dB) B B B +8dB C Press Figure 3-16 — +8dB displayed on MA V 128 RCA D Press and release the V iew ( ) button once to decrease the a ...

  • Extron electronics MAV - page 40

    Operation, cont’d MAV Series Switchers • Operation 3-16 If another input button is pressed and released, the level value for the current input is saved and the level value for the newly selected input is displayed. E Press and release the Audio button. The Audio LED stops blinking and the V iew ( ) LED (if lit), the Esc ( ) LED (if lit), the se ...

  • Extron electronics MAV - page 41

    3-17 MAV Series Switchers • Operation W orksheets Rather than trying to remember the configuration for each preset, use worksheets to record this information. Make copies of the blank worksheet on page 3-17 and use one for each preset configuration. The forms accommodate all of the MA V models. Cross of f all unused or inactive inputs and outputs ...

  • Extron electronics MAV - page 42

    Operation, cont’d MAV Series Switchers • Operation 3-18 Worksheet example 2: Daily configuration Figure 3-20 shows a MA V 1616 switcher with 10 input devices tied to 14 output devices. V ideo and audio ar e shown as separate lines. This configuration has been assigned preset #3 with a title of “Daily Configuration” to indicate its use. 3 Fi ...

  • Extron electronics MAV - page 43

    3-19 MAV Series Switchers • Operation 1 2345 678 12 3 45 67 8 91 0 1 1 11 12 13 14 15 16 10 12 13 14 15 16 9 Input sources Output destinations Preset # Title: Video: A udio: Fill in the preset number and use colors, or dashes , etc. to mak e connecting lines. Indicate if the configuration is f or Video , A udio , or both. Configuration worksheet ...

  • Extron electronics MAV - page 44

    Operation, cont’d MAV Series Switchers • Operation 3-20 ...

  • Extron electronics MAV - page 45

    MA V Series Switchers 4 Chapter Four Pr ogrammer’ s Guide Host-to-Switcher Instructions Switcher-Initiated Messages Switcher Error Responses Using the Command/Response T able Command/Response T able ...

  • Extron electronics MAV - page 46

    Programmer’ s Guide, cont’d MAV Series Switchers • Programmer’s Guide 4-2 Programmer’ s Guide The switcher ’s r ear panel RS-232/RS-422 connector (figure 4-1) can be connected to the serial port output of a host device such as a computer or control system. This connection makes software contr ol of the switcher possible. Female 51 96 Ma ...

  • Extron electronics MAV - page 47

    4-3 MAV Series Switchers • Programmer’s Guide RAM T est Failed ROM Checksum Failed EEPROM Reset (Presets/Attenuators) Serial EEPROM Reset (Current Settings) Invalid Jumpers If an error occurs during powerup, the switcher initiates one or mor e of the messages listed above. All Configuration Memory Cleared The memory cleared message is initiated ...

  • Extron electronics MAV - page 48

    Programmer’ s Guide, cont’d MAV Series Switchers • Programmer’s Guide 4-4 Command/Response T able Symbol Definitions: = Carriage r eturn/line feed = Carriage return (no line feed) • = Space X1 = Input number 01 – 12 (MA V 124 RCA) 01 – 16 (MA V 168/1616); X2 = Output number 01 – 08 (MA V 128 RCA); 01 – 08 (MA V 168); 01 – 16 (MA ...

  • Extron electronics MAV - page 49

    4-5 MAV Series Switchers • Programmer’s Guide Command/response table for SIS commands (Cont’d) Command ASCII Command Response Additional description (host to switcher) (switcher to host) Audio input gain and attenuation (continued) Decrement gain down X1 }G In X1 •Aud= X6 Example : 7 }G In7•Aud=-09 Audio input 7 level decremented fr om -8 ...

  • Extron electronics MAV - page 50

    Programmer’ s Guide, cont’d MAV Series Switchers • Programmer’s Guide 4-6 Command/response table for SIS commands (Cont’d) Command ASCII Command Response Additional description (host to switcher) (switcher to host) Executive mode Lock front panel X Exe1 Enable executive mode. Unlock front panel x Exe0 Disable executive mode. Resets Reset ...

  • Extron electronics MAV - page 51

    MA V Series Switchers 5 Chapter Five Matrix Softwar e Matrix Switchers Control Program Button-Label Generator ...

  • Extron electronics MAV - page 52

    Matrix Software, cont’d MAV Series Switchers • Matrix Software 5-2 Matrix Software T wo software programs accompany the MA V Series switchers: • The Extr on Matrix Switcher+ Control Program (Extron part number 29-015-01), which communicates with the switcher via the RS-232/RS-422 port, provides an easy way for you to set up ties and sets of t ...

  • Extron electronics MAV - page 53

    5-3 MAV Series Switchers • Matrix Software Figure 5- 1 — Extron Matrix Switchers Contr ol Program window (blank) Figure 5-2 — Sample pr ogram window (complete) 4. T o make the control program easier to use, you can assign a device icon to each input and output. Click on a box that repr esents an input or output, and drag the desired icon onto ...

  • Extron electronics MAV - page 54

    Matrix Software, cont’d MAV Series Switchers • Matrix Software 5-4 Go — Activates the selected preset as the current configuration. Save as — Allows the current set of ties to be saved as a preset. Enter the pr eset number when prompted to do so. Changes – T ake — Allows you to save to file any changes made to the displayed configuratio ...

  • Extron electronics MAV - page 55

    5-5 MAV Series Switchers • Matrix Software Using emulation mode Emulation mode allows you to set up the software without attaching the switcher to a computer . T o use emulation mode, do the following: 1. Start the program as described in step 1 on page 5-2. 2. Choose Emulate, and click OK. 3. Choose an emulation file to open, and click OK. The f ...

  • Extron electronics MAV - page 56

    Matrix Software, cont’d MAV Series Switchers • Matrix Software 5-6 Figure 5-3 — Extron’ s Button-Label Generator window 3. Using normal W indows controls, you can cr eate and print labels that can be placed in the label windows on the front panel of the switcher . For information about using the pr ogram, you can access the help program by ...

  • Extron electronics MAV - page 57

    MA V Series Switchers A Appendix A Specifications Specifications Part Numbers ...

  • Extron electronics MAV - page 58

    Specifications, cont’d MAV Series Switchers • Specifications A-2 Specifications Video Routing MAV 128 RCA .................. 12 x 8 matrix MAV 168 Series ................ 16 x 8 matrix MAV 1616 Series .............. 16 x 16 matrix Gain ............................................... Unity Bandwidth .................................... 150 MHz ( ...

  • Extron electronics MAV - page 59

    A-3 MAV Series Switchers • Specifications Sync Input type (MAV 168/1616, 3 BNC) ....... RGsB, RsGsBs Output type (MAV 168/1616, 3 BNC) ....... RGsB, RsGsBs Genlock connectors ..................... 2 BNC female Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM Input impedance .......................... 75 ohms Outpu ...

  • Extron electronics MAV - page 60

    Specifications, cont’d MAV Series Switchers • Specifications A-4 Maximum level (600 ohm) ......... >+15dBm, balanced or unbalanced at stated %THD+N 0dBu = 0.775 volts (RMS). Control/remote — switcher Serial control port ........................ RS-232 or RS-422, 9-pin female D connector Baud rate and protocol ............... 9600, 8-bit, 1 ...

  • Extron electronics MAV - page 61

    A-5 MAV Series Switchers • Specifications Part Numbers MA V switcher part numbers Extron Part Part # MAV 1616 HDTV/component video and audio switcher 60-367-01 MAV 1616 HDTV/component video switcher 60-367-02 MAV 168 HDTV/component video and audio switcher 60-366-01 MAV 168 HDTV/component video switcher 60-366-02 Extron Part Part # MAV 1616 S-vid ...

  • Extron electronics MAV - page 62

    Specifications, cont’d MAV Series Switchers • Specifications A-6 Extron Part Part # BNC-4 Mini HR Cable Bulk BNC 4-500’ HR 22-032-02 Bulk BNC 4-1000’ HR 22-032-03 BNC-5 Mini HR Cable Bulk BNC 5-500’ HR 22-020-02 Bulk BNC 5-1000’ HR 22-020-03 Plenum BNC-5 Mini HR Cable Bulk BNC 5-500’ HRP 22-103-02 Bulk BNC 5-1000’ HRP 22-103-03 Asso ...

  • Extron electronics MAV - page 63

    MA V Series Switchers B Appendix B Refer ence Information Hardware Procedures Button Labels ...

  • Extron electronics MAV - page 64

    Reference Information, cont’d MAV Series Switchers • Reference Information B-2 Reference Information Hardwar e Pr ocedures This appendix describes how to perform hardwar e upgrade procedures such as swapping the RS-232 and RS-422 ports, installing a new firmware update, and replacing the fuse. Opening the switcher Befor e you can perform any of ...

  • Extron electronics MAV - page 65

    B-3 MAV Series Switchers • Reference Information Closing the switcher T o close the switcher when you have finished performing a procedur e in this chapter , do the following: 1. Reinstall any cables you removed. T o connect a self-latching cable to a receptacle, align the holes in the connector with the pins in the receptacle, and pr ess evenly ...

  • Extron electronics MAV - page 66

    Reference Information, cont’d MAV Series Switchers • Reference Information B-4 If you choose to check for proper operation before putting the cover back on, ensure that tools and hands ar e outside the switcher , and then connect the power cord to the unit and to an AC source. The switcher should power up normally . Unplug the AC power cord, an ...

  • Extron electronics MAV - page 67

    B-5 MAV Series Switchers • Reference Information 9. Reinstall the cables that were r emoved in step 2 and 3. Ensure that the RS-232/RS-422 ribbon cable is plugged into the proper r eceptacle for either RS-232 or RS-422, as appropriate. 10. Reinstall the switcher ’s front panel and cover . See Closing the switcher on page B-3. If you choose to c ...

  • Extron electronics MAV - page 68

    Reference Information, cont’d MAV Series Switchers • Reference Information B-6 ...

  • Extron electronics MAV - page 69

    B-7 MAV Series Switchers • Reference Information ...

  • Extron electronics MAV - page 70

    Reference Information, cont’d MAV Series Switchers • Reference Information B-8 ...

  • Extron electronics MAV - page 71

    FCC Class A Notice — MA V 128 RCA Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, ...

  • Extron electronics MAV - page 72

    Extron Electronics, USA 1230 South Lewis Str eet Anaheim, CA 92805 USA 714.491.1500 F ax 714.491.1517 Extron Electronics, Europe Beeldschermweg 6C 3821 AH Amersfoort The Netherlands +31.33.453.4040 F ax +31.33.453.4050 Extron Electronics, Asia 135 Joo S eng Road, #04-01 PM Industrial Building Singapore 368363 +65.6383.4400 F ax +65.6383.4664 Extron ...

Manufacturer Extron electronics Category Switch

Documents that we receive from a manufacturer of a Extron electronics MAV can be divided into several groups. They are, among others:
- Extron electronics technical drawings
- MAV manuals
- Extron electronics product data sheets
- information booklets
- or energy labels Extron electronics MAV
All of them are important, but the most important information from the point of view of use of the device are in the user manual Extron electronics MAV.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Extron electronics MAV, service manual, brief instructions and user manuals Extron electronics MAV. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Extron electronics MAV.

Similar manuals

A complete manual for the device Extron electronics MAV, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Extron electronics MAV by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Extron electronics MAV.

A complete Extron electronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Extron electronics MAV - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Extron electronics MAV, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Extron electronics MAV, that we can find in the current document
3. Tips how to use the basic functions of the device Extron electronics MAV - which should help us in our first steps of using Extron electronics MAV
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Extron electronics MAV
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Extron electronics MAV in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Extron electronics MAV?

Use the form below

If you did not solve your problem by using a manual Extron electronics MAV, ask a question using the form below. If a user had a similar problem with Extron electronics MAV it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)