English dropdown-ico

Manual EDGE Tech ECAT1000

9 pages 0.16 mb
Download

Go to site of 9

Summary
  • EDGE Tech ECAT1000 - page 1

    Caterpillar 3126 B & E models Edge EZ Module Installation Instructions & Manual OLD P/N: ECAT1000 NEW P/N: 50200 ...

  • EDGE Tech ECAT1000 - page 2

    2 Table of Contents DISCLAIMER OF LIABILITY ___________________________________________________ 3 LIMITATION OF WARRANTY __________________________________________________ 3 Installation Instructions _________________________________________________________ 5 Supplied It ems: ____________________________________________________________________ 5 It ...

  • EDGE Tech ECAT1000 - page 3

    3 THIS IS A HIGH PERFORMANCE PRODUCT. USE AT YOUR OWN RISK . Do not use this product until you have carefully read the following agreement. This sets forth the terms and conditions for the use of this product. The in stallation of this product indicates that the BUYER has read and understands this agreement and accepts its terms and conditions DISC ...

  • EDGE Tech ECAT1000 - page 4

    4 THIS PRODUCT AND THE B OOST ELBOW (if installed) MUST BE REMOVED W HEN TAKING VEHICLE TO VEHICLE D EALERSHIP OR OTHER SER VICE FACILITY!! LEAVING PRODUCT INSTALLED MAY AFFECT DEALER DIA GNOSTIC ANALYSIS AN D SCAN TOOL FUNCTIONS!! This warranty is void for any new products purchased through auction websites. Warranty is valid only for new products ...

  • EDGE Tech ECAT1000 - page 5

    5 Installation Instructions Please read these instructions through completely and thoroughly understand each step prior to installation . IMPORTANT: Read all Disclaimer, Warranty, and Installation Instructions before installing product Supplied Items: 1. Power Edge EZ CAT Module 2. Three Wire Ties 3. Two Velcro Strips 4. One hose clamp 5. One Brass ...

  • EDGE Tech ECAT1000 - page 6

    6 Harness Connector – Your ECAT1000 module may be equipped with a harness that can be disconnected at th e module itself (See figure 1A). It is important to make sure that your ECAT 1000 module is always connected to the harness when the wiring harness is connected to the vehicle, otherwise the vehicle may not run properly, or may trip engine “ ...

  • EDGE Tech ECAT1000 - page 7

    7 Boost Sensor Connection 1. The boost sensor is located on the driver’s side of the engine as shown in the photo. Disconnect the stock connector and plug in the supplied connectors that are located closest to the Power Edge EZ CAT module. IAP Sensor Connection 2. The IAP sensor is located on the driver’s side towards the front of the engine. D ...

  • EDGE Tech ECAT1000 - page 8

    8 7. Using the 7/16” wrench, unscrew the stoc k brass elbow out of the turbocharger housing. Using the 7/16” wrench, install the supplied brass elbow, tighten-be careful not to over-tighten. Slip the supplied hose clamp onto the stock hose, install the stock hose onto the newly inst alled brass elbow and tighten the hose clamp with the ¼” so ...

  • EDGE Tech ECAT1000 - page 9

    9 Technical Support: 888-360-3343 To expedite your support call, please have part number (i.e., EAF2100A), version number, and Date of Manufacture ready prior to calling support . ...

Manufacturer EDGE Tech Category Computer Drive

Documents that we receive from a manufacturer of a EDGE Tech ECAT1000 can be divided into several groups. They are, among others:
- EDGE Tech technical drawings
- ECAT1000 manuals
- EDGE Tech product data sheets
- information booklets
- or energy labels EDGE Tech ECAT1000
All of them are important, but the most important information from the point of view of use of the device are in the user manual EDGE Tech ECAT1000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals EDGE Tech ECAT1000, service manual, brief instructions and user manuals EDGE Tech ECAT1000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product EDGE Tech ECAT1000.

Similar manuals

A complete manual for the device EDGE Tech ECAT1000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use EDGE Tech ECAT1000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of EDGE Tech ECAT1000.

A complete EDGE Tech manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual EDGE Tech ECAT1000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the EDGE Tech ECAT1000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the EDGE Tech ECAT1000, that we can find in the current document
3. Tips how to use the basic functions of the device EDGE Tech ECAT1000 - which should help us in our first steps of using EDGE Tech ECAT1000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with EDGE Tech ECAT1000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of EDGE Tech ECAT1000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning EDGE Tech ECAT1000?

Use the form below

If you did not solve your problem by using a manual EDGE Tech ECAT1000, ask a question using the form below. If a user had a similar problem with EDGE Tech ECAT1000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)