English dropdown-ico

Manual Lincoln Electric 350-SA

27 pages 0.42 mb
Download

Go to site of 27

Summary
  • Lincoln Electric 350-SA - page 1

    350-S A PERKINS Diesel Engine Driven DC Arc W elding Po wer Source OPERA TOR’S MANUAL For use with machines having Code Number 10074 or 10074 CV. IM519-A August, 1998 Safety Depends on You Lincoln arc welding and cutting equipment is designed and built with safety in mind. However, your overall safety can be increased by proper installation ... a ...

  • Lincoln Electric 350-SA - page 2

    FOR ENGINE powered equipment. 1.a. Turn the engine off before troubleshooting and maintenance work unless the maintenance work requires it to be running. ____________________________________________________ 1.b. Operate engines in open, well-ventilated areas or vent the engine exhaust fumes outdoors. ________________________________________________ ...

  • Lincoln Electric 350-SA - page 3

    ii SAFETY ii ARC RA YS can burn. 4.a. Use a shield with the proper filter and cover plates to protect your eyes from sparks and the rays of the arc when welding or observing open arc welding. Headshield and filter lens should conform to ANSI Z87. I standards. 4.b. Use suitable clothing made from durable flame-resistant material to protect your skin ...

  • Lincoln Electric 350-SA - page 4

    FOR ELECTRICALL Y powered equipment. 8.a. Turn off input power using the disconnect switch at the fuse box before working on the equipment. 8.b. Install equipment in accordance with the U.S. National Electrical Code, all local codes and the manufacturer’s recommendations. 8.c. Ground the equipment in accordance with the U.S. National Electrical C ...

  • Lincoln Electric 350-SA - page 5

    iv SAFETY iv PRÉCA UTIONS DE SÛRETÉ Pour votre propre protection lire et observer toutes les instructions et les précautions de sûreté specifiques qui parraissent dans ce manuel aussi bien que les précautions de sûreté générales suivantes: Sûreté Pour Soudage A L’Arc 1. Protegez-vous contre la secousse électrique: a. Les circuits à ...

  • Lincoln Electric 350-SA - page 6

    Thank You for selecting a QUALITY product by Lincoln Electric. We want you to take pride in operating this Lincoln Electric Company product ••• as much pride as we have in bringing this product to you! Read this Operators Manual completely before attempting to use this equipment. Save this manual and keep it handy for quick reference. Pay par ...

  • Lincoln Electric 350-SA - page 7

    Page GENERAL DESCRIPTION ..................................................................................................7 DESIGN SUMMARY ............................................................................................................7 OPTIONAL FEATURES .................................................................................. ...

  • Lincoln Electric 350-SA - page 8

    GENERAL DESCRIPTION The 350-SA is a heavy duty engine-driven DC arc welding power source capable of providing constant current output for stick welding or DC TIG welding. With the addition of the optional Wire Feed Module for K1314-4, the 350-SA will provide constant voltage output for running the LN-25, LN-23P or LN-7 wire feeders. The Wire Feed M ...

  • Lincoln Electric 350-SA - page 9

    – 8 – OPTIONAL FEA TURES Accessory Set (K703) Includes electrode and work cables, headshield, work clamp, and electrode holder. Ether Start Kit (K793) for P erkins Engine When frequent starting is expected below -12°C, (10°F) remove the “thermostart” system and install the optional ether start kit to provide maximum cold weather starting ...

  • Lincoln Electric 350-SA - page 10

    – 9 – Product Name Description Horsepower Operating Speeds Displacement Capacities Perkins D3.152 3 Cylinder, 4 Cycle, Water-Cooled Diesel Engine with Thermostart Glow Plug and Engine Protection Full Load: 38.2 HP @ 1725 RPM Full Load: 1725 RPM High Idle: 1800 RPM Low Idle: 1350 RPM 152 Cu. in. (2.5 ltrs) Fuel: 15 gals (57 ltrs) Oil: 6.5 qts (6 ...

  • Lincoln Electric 350-SA - page 11

    – 10 – PRE-OPERA TION INST ALLA TION Safety Precautions Exhaust Spark Arrester Some federal, state or local laws may require that diesel engines be equipped with exhaust spark arresters when they are operated in certain locations where unarrested sparks may present a fire hazard. The standard mufflers included with these welders do not qualify ...

  • Lincoln Electric 350-SA - page 12

    – 11 – 3 . Proper placement of the equipment on the undercarriage to ensure stability side to side and front to back when being moved and when standing by itself while being operated or serviced. 4 . Typical conditions of use, i.e. travel speed, roughness of surface on which the trailer will be operated, environmental conditions & likely ma ...

  • Lincoln Electric 350-SA - page 13

    – 12 – Battery Charging The 350-SA is equipped with a wet charged battery. The charging current is automatically regulated when the battery is low (after starting the engine) to a trickle current when the battery is fully charged. When replacing, jumping or otherwise connecting the battery to the battery cables, the proper polarity must be obse ...

  • Lincoln Electric 350-SA - page 14

    – 13 – ENGINE OPERA TION Operate the welder with the doors closed. Leaving the doors open changes the designed air flow and can cause overheating. Starting the Perkins D3.152 Engine a) Turn the idler control to “HIGH”. b) Turn the ignition control to “ON”. c) Push in the “RESET” button. d) Press the “START” button. Release butto ...

  • Lincoln Electric 350-SA - page 15

    – 14 – When a forceful “digging” arc is required, usually for vertical and overhead welding, use a higher “Current Range Selector” setting and lower open circuit voltage. For example: to obtain 175 amps and a forceful arc, set the “Current Range Selector” to the 240-160 position and the “Fine Current Adjustment” setting to get 1 ...

  • Lincoln Electric 350-SA - page 16

    – 15 – MAINTENANCE General Instructions for Diesel Engine W elders 1. Blow out the welder and controls with an air hose at least once every two months. In particularly dirty locations, this cleaning may be necessary once a week. Use low pressure air to avoid driving dirt into the insulation. 2. “Current Range Selector” contacts should not b ...

  • Lincoln Electric 350-SA - page 17

    – 16 – 3. Change the crankcase oil at regular intervals using the proper grade of oil as recommended in the engine operating manual. 4 . Change the oil filter in accordance with the instructions in the engine operator’s manual. When the filter is changed, add a quart of oil to the crankcase to replace the oil held in the filter during operati ...

  • Lincoln Electric 350-SA - page 18

    – 17 – Idler Maintenance Before doing electrical work on the idler printed circuit board, disconnect the battery. ------------------------------------------------------------------------ 1. The solenoid plunger must work freely because binding can cause engine surging. If surging occurs, be sure the plunger is properly lined up with the throttl ...

  • Lincoln Electric 350-SA - page 19

    – 18 – TROUBLE A. Machine fails to hold the “heat” consistently. B. Welder starts but fails to generate current. C. Welding arc is loud and spatters excessively. CA USE 1. Rough or dirty commutator. 2. Brushes may be worn down to limit. 3. Field circuit may have variable resistance connection or intermittent open circuit due to loose connec ...

  • Lincoln Electric 350-SA - page 20

    – 19 – TROUBLE D. Welding current too great or too small compared to indication on the dial. E. Arc continuously pops out. CA USE 1. Exciter output low causing low output compared to dial indication. 2. Operating speed too low or high. 1. “Current Range Selector” switch may be set at an intermediate position. W H A TT OD O 1. Check exciter ...

  • Lincoln Electric 350-SA - page 21

    – 20 – ELECTRONIC IDLER TR OUBLESHOO TING GUIDE Engine Will Not Return to Idle in Approximately 15 Seconds Set Idler Control Switch to the Auto Position Check to see Whether Oil Pressure Light is On and Alternator is Charging Light OFF Light ON If Oil Light is O.K., Replace Check Continuity of Idler Oil Pressure Switch Control Switch Continuity ...

  • Lincoln Electric 350-SA - page 22

    – 21 – CONTROL PANEL COMPONENTS LEAD COLOR CODE B-BLACK G-GREEN N-BROWN B R + - + - Y R W B B U U SLIP RINGS TO IRON R N A 54 3 2 1 ALTERNATOR AUXILIARY POWER WINDINGS CURRENT TRANSFORMER CB3 CB1 115 VOLT RECEPTACLE 230 VOLT RECEPTACLE Y NEGATIVE SELECTOR SWITCH WELDER LEAD BLOCK AC AC CR2 REED RELAY 42 602A G U CB2 CB4 FUSE 15A. 1 2 3 4 5 6 7 ...

  • Lincoln Electric 350-SA - page 23

    – 22 – DIMENSION PRINT (52.94) (31.75) (20.91) (28.00) (22.00) (22.50) * (24.50) (27.12) CENTER OF GRAVITY WITH OIL AND WATER IN ENGINE, BUT NO FUEL. (67.00) (65.25) 165.7 # (61.00) (53.75)* (8.12) (3.00) (.88) (16.53) (35.10) (32.82) (43.13) (45.07) (6.00) * 1.5(.59) X 2.8(1.10) SLOTS # 1.8(.69) DIA. HOLES # 71.1 55.9 57.2 62.2 68.9 15.2 83.4 ...

  • Lincoln Electric 350-SA - page 24

    – 23 – Now A vailable...12th Edition The Procedure Handbook of Ar c W elding With over 500,000 copies of previous editions published since 1933, the Procedure Handbook is considered by many to be the “Bible” of the arc welding industry. This printing will go fast so don’t delay. Place your order now using the coupon below. The hardbound b ...

  • Lincoln Electric 350-SA - page 25

    W ARNING A VISO DE PRECA UCION A TTENTION W ARNUNG A TENÇÃO Spanish French German Portuguese Japanese Chinese Korean Arabic READ AND UNDERST AND THE MANUFACTURER’S INSTRUCTION FOR THIS EQUIPMENT AND THE CONSUMABLES TO BE USED AND FOLLOW YOUR EMPLOYER’S SAFETY PRACTICES. SE RECOMIENDA LEER Y ENTENDER LAS INSTRUCCIONES DEL F ABRICANTE P ARA EL ...

  • Lincoln Electric 350-SA - page 26

    W ARNING A VISO DE PRECA UCION A TTENTION W ARNUNG A TENÇÃO Spanish French German Portuguese Japanese Chinese Korean Arabic LEIA E COMPREENDA AS INSTRUÇÕES DO F ABRICANTE P ARA ESTE EQUIP AMENTO E AS P ARTES DE USO, E SIGA AS PRÁTICAS DE SEGURANÇA DO EMPREGADOR. ● Keep your head out of fumes. ● Use ventilation or exhaust to remove fumes f ...

  • Lincoln Electric 350-SA - page 27

    • Sales and Service through Subsidiaries and Distributors Worldwide • Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com World's Leader in Welding and Cutting Products Premier Manufacturer of Industrial Motors STATEMENT OF LIMITED WARRANTY The Lincoln Electric Company (Lincoln) warrants ...

Manufacturer Lincoln Electric Category Welding System

Documents that we receive from a manufacturer of a Lincoln Electric 350-SA can be divided into several groups. They are, among others:
- Lincoln Electric technical drawings
- 350-SA manuals
- Lincoln Electric product data sheets
- information booklets
- or energy labels Lincoln Electric 350-SA
All of them are important, but the most important information from the point of view of use of the device are in the user manual Lincoln Electric 350-SA.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Lincoln Electric 350-SA, service manual, brief instructions and user manuals Lincoln Electric 350-SA. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Lincoln Electric 350-SA.

Similar manuals

A complete manual for the device Lincoln Electric 350-SA, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Lincoln Electric 350-SA by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Lincoln Electric 350-SA.

A complete Lincoln Electric manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Lincoln Electric 350-SA - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Lincoln Electric 350-SA, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Lincoln Electric 350-SA, that we can find in the current document
3. Tips how to use the basic functions of the device Lincoln Electric 350-SA - which should help us in our first steps of using Lincoln Electric 350-SA
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Lincoln Electric 350-SA
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Lincoln Electric 350-SA in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Lincoln Electric 350-SA?

Use the form below

If you did not solve your problem by using a manual Lincoln Electric 350-SA, ask a question using the form below. If a user had a similar problem with Lincoln Electric 350-SA it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)