English dropdown-ico

Manual Cabletron Systems 6A000/ZX-250

268 pages 1.21 mb
Download

Go to site of 268

Summary
  • Cabletron Systems 6A000/ZX-250 - page 1

    SmartCell 6A000/ZX-250 Reference Manual 35 Industrial Wa y Rochester, NH 03866-50 05 USA (603) 332-9400 Part # 04-0044-02 Rev. A Order # 9032400 ...

  • Cabletron Systems 6A000/ZX-250 - page 2

    ii SmartCell 6A000/ZX-250 Reference Manual NOTICE Cabletron Systems reserves the right to m ake changes in specifications and other infor mation contained in this document without prior notice. The r eader should in all cases consult Cabletron Systems to d etermine whether any such changes have been made. The hardware, firmware, or software des cri ...

  • Cabletron Systems 6A000/ZX-250 - page 3

    SmartCell 6A000/ZX-250 Referen ce Manual iii REVISION HISTORY Document Name: SmartCel l 6A000/ZX-25 0 Reference Manu al Document Order Number: Order # 903 2400 Document Part Number : Part # 04 -0044-02 R ev . A Author: Bruce Jordan Editor: Carre Gibson Date Revisi on Descri p tion October 19 97 A Initial releas e ...

  • Cabletron Systems 6A000/ZX-250 - page 4

    iv SmartCell 6A000/ZX-250 Reference Manual ...

  • Cabletron Systems 6A000/ZX-250 - page 5

    SmartCell 6A000/ZX-250 Refere nce Manual v T ABL E OF CONT ENT S 1 Introdu ction 1-1 Audience and Scope 1-1 Definitions 1-1 Content 1-1 Sections 1-2 Conventions 1-2 Abbreviations 1-3 Help Options 1-4 Other Reference Options 1-4 Switch Attribute 1-5 List of Commands and Possible Switch Attributes 1-9 2 Console Co mma nds 2-1 Alarm 2-1 AlarmConfig 2- ...

  • Cabletron Systems 6A000/ZX-250 - page 6

    vi SmartCell 6A000/ZX-250 Reference Manual Table of Contents IPATMStat 2-64 LANEClient 2-66 LECS 2-68 LECSAddress 2-70 LECSELAN 2-72 LECSELANLEC 2-75 LECSStat 2-78 LECSTLVParam 2-81 LECSTLVSet 2-83 LECSVCC 2-88 LES 2-90 LESARP 2-91 LESClient 2-92 LESELAN 2-94 LESLECStat 2-98 LESStat 2-100 Log 2-103 LogAlarmMask 2-104 LogBuffer 2-106 LogBufferSize 2 ...

  • Cabletron Systems 6A000/ZX-250 - page 7

    SmartCell 6A000/ZX-250 Reference Manual vii Table of Content s Switch 2-182 SwitchConfig 2-184 SwitchName 2-188 SwitchTrafficCongestion 2-189 TrafficDe scriptor 2-197 TrustedNMS 2-199 UNIRoute 2-201 VCCMask 2-204 WellKnownAddress 2-206 3 Boot Load Comm ands 3-1 Accessing the Boot Load Commands 3-2 chpi 3-3 clfs 3-4 dcfg 3-5 df 3-6 go 3-7 he 3-8 pon ...

  • Cabletron Systems 6A000/ZX-250 - page 8

    viii SmartCell 6A000/ZX-250 Reference Manual Table of Contents ...

  • Cabletron Systems 6A000/ZX-250 - page 9

    SmartCell 6A000/ZX-250 Reference Manual ix LIST OF T ABLES 1-1 Li st of Oper ators 1-5 1-2 Operator Table Explanation 1-6 1-3 Param eter Table Explanatio n 1-7 1-4 Descript ion Table Explanatio n 1-8 1-5 De scriptio n Table Ex ample 1-8 2-1 Filter Flags 2-113 2-2 So ftware Modules for Log Trace 2-116 2-3 So ftware Sub modules f or LogTr ace 2-117 2 ...

  • Cabletron Systems 6A000/ZX-250 - page 10

    x SmartCell 6A000/ZX-250 Reference Manual Li st of Tables ...

  • Cabletron Systems 6A000/ZX-250 - page 11

    SmartCell 6A000/ZX-250 Reference M anual 1-1 1 INTRODUCTION This reference manu al describes the console commands for the SmartCell 6A000 and SmartCell ZX-250 A TM switches. The two switches share a common co nsole interface and are r eferred to in this manual as the SmartCell 6A000 /ZX- 250. Audience a nd Scope The manual is intend e d for n etwor ...

  • Cabletron Systems 6A000/ZX-250 - page 12

    1-2 SmartCell 6A000/ZX-250 Reference Manual Introduction Sections Read "Switch Attribute" for an example and definition of the various sections under each switch attribute as well as a descri ption of how the manua l is o rganized. Each section begins with a switch attribute headin g (for example, "PVCByID"). Then come the d eta ...

  • Cabletron Systems 6A000/ZX-250 - page 13

    SmartCell 6A000/ZX-250 Reference M anual 1-3 Introduction IP NetMask : 255.255.255.0 IP/ATM Client 3 ============================================================================== Client State : Operational Client Address : 39:00:00:00:00:00:00:00:00:00:14:15:00:00:00:5A:01:01:7C:00 Server : is local Server Connection : Established MTU : 9180 IP Ad ...

  • Cabletron Systems 6A000/ZX-250 - page 14

    1-4 SmartCell 6A000/ZX-250 Reference Manual Introduction Help Op tions If you wan t information on a specific command, type ? or help before typing the command and you will get a brief description of th e command and all its input parameters. If you want inform ation about a specific inp ut parameter while executing a comm and, type ? or help after ...

  • Cabletron Systems 6A000/ZX-250 - page 15

    SmartCell 6A000/ZX-250 Reference M anual 1-5 Introduction Switch Attribute This section —immediately belo w the heading—gives a brief descri ption of what the switch attr ibute does. A detailed description o f each command is available under "Descriptions." "X" under any of these headings indicates the switch attribute is ap ...

  • Cabletron Systems 6A000/ZX-250 - page 16

    1-6 SmartCell 6A000/ZX-250 Reference Manual Introduction Opera tors Parameters appear in the p arameter tables in the same order and spelling as the switch shows them. Most switch attribu te descriptions show two tables —Input Parameter and Output P arameter . If the parameter has already been described in the input parameter table, no reference ...

  • Cabletron Systems 6A000/ZX-250 - page 17

    SmartCell 6A000/ZX-250 Reference M anual 1-7 Introduction Only one parameter table in a switch attribute section means either that switch attribute uses only input parameters or that the output parameters are identical to the input parameters. The h eading of the table indicates which is the case. If the ta ble heading s ays Inpu t Par ameter or Ou ...

  • Cabletron Systems 6A000/ZX-250 - page 18

    1-8 SmartCell 6A000/ZX-250 Reference Manual Introduction Description s The following is an ex ample of a description section. It is located under "BUSELAN." Note the detailed d escription of the command followin g the table. Exam ples Examples are copied ex actl y fro m the swit ch con sole to show you what you should see. They app ear at ...

  • Cabletron Systems 6A000/ZX-250 - page 19

    SmartCell 6A000/ZX-250 Reference M anual 1-9 Introduction switch_prompt # show buselan ELANNumber : 103 ELAN : elan103 ELAN Number : 103 ELAN Name : elan103 ATM Address :39:00:00:00:00:00:00:00:20:D4:14:15:00:00:20:D4:14:15:66:02 Max Frame Size : 4544 Connection Method : PVC Distribute VPI/VCI: 0/50 LAN Type : 802.5 Multipoint : YES switch_prompt # ...

  • Cabletron Systems 6A000/ZX-250 - page 20

    1-10 SmartCell 6A000/ZX-250 Reference Manual Introduction modify (set) AlarmConfig AlarmV erbose BUSELAN CACParams ILMIAdminStatus IP A ddress IP A TMC lient LANEClient LECSAddress LECSELAN LECSELANLEC LECSTL VSET LESELAN LogAlarmMask L ogBuf fer LogPrint LogT race MyNMAddr NetPrefix P ortAutoDetect PortConifg PortMode PortTraf ficCongestion P romp ...

  • Cabletron Systems 6A000/ZX-250 - page 21

    SmartCell 6A000/ZX-250 Refere nce Manual 1-11 Introduction show (dis play) activate/d eactivate ALARM AlarmConfig AlarmV erbose BUSClient BUSELAN B USLECStat BUSStat CACParams CACStat C lient ClientARP ClientStat ClientVC Community ELAN IISPRoute ILMIAdminStatus IP A TMARP IP A TMPVC IP A TMStat LECS LECSAddress LECSELAN LECSELANLEC LECSStat LECSTL ...

  • Cabletron Systems 6A000/ZX-250 - page 22

    1-12 SmartCell 6A000/ZX-250 Reference Manual Introduction backup/restore clear disabl e/enab le exit flus h history switch ALARM BUSStat Config LESStat LogBuff er LogT race PortStat disable/enable exit ALARM IISPRoute PVC UNIRoute W ellKnow nAddre ss history ...

  • Cabletron Systems 6A000/ZX-250 - page 23

    SmartCell 6A000/ZX-250 Refere nce Manual 1-13 Introduction passwd restart setup shutdown start stop passw d client Switch shutdown LECS LES log Ping LECS LES log ...

  • Cabletron Systems 6A000/ZX-250 - page 24

    1-14 SmartCell 6A000/ZX-250 Reference Manual Introduction updat e firmware ...

  • Cabletron Systems 6A000/ZX-250 - page 25

    SmartCell 6A000/ZX-250 Reference M anual 2-1 2 C ONSOLE COMMANDS Alarm Use Alarm to set alarm messaging features. Opera tors show, clear, flush Parame ters In the Output Parameter table below , ( </d> ) indicates param eters that are available only thro ugh the show alarm /d (detailed) command. ( </s> ) (summarized) appears next to a pa ...

  • Cabletron Systems 6A000/ZX-250 - page 26

    2-2 SmartCell 6A000/ZX-250 Reference Manual Console Com mands [T imeStamp] ( </s> ) T ime (in system up time) when the alarm message entry was created. The time stamp is in the for mat [hrs:mins:secs :msecs]. n/a [Message] ( </s> ) Numeric code that specifies the message in the log entry that generated this alarm message. Actual alph an ...

  • Cabletron Systems 6A000/ZX-250 - page 27

    SmartCell 6A000/ZX-250 Reference M anual 2-3 Console Commands Description s [Num of logs per file] Number of alarm messages that can be held by each file within the alarm messag e buffer . 8 Operat or Paramet ers/Permis sions Description show alarm (/s | /d) [Index] <index> Administrator Displays alarm messages contained within the alarm mess ...

  • Cabletron Systems 6A000/ZX-250 - page 28

    2-4 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Exam ples (AlarmVerbose is off) switch_prompt # modify alarmverbose Mode(On) : off Setting Alarm Verbose Mode to Off switch_prompt # show alarm 1 /s ---------------------------------------------------- Num Mod SubMod T(h:m:s:ms) Msg ---------------------------------------------------- 1 ...

  • Cabletron Systems 6A000/ZX-250 - page 29

    SmartCell 6A000/ZX-250 Reference M anual 2-5 Console Commands Writing into Alarm Configuration Alarm directory : ALARM Alarm Config file : alarmc.db Alarm Filename : zalarm Num of alarm files : 32 Starting file number: 0 Num of used files : 18 Num of logs per file: 8 Would you also like to clear this Alarm Configuration file(y/n)?: y switch_prompt ...

  • Cabletron Systems 6A000/ZX-250 - page 30

    2-6 SmartCell 6A000/ZX-250 Reference Manual Console Com mands AlarmConfi g Use AlarmConfig (alarm configuration) to determine alarm message b uffer file configur ation. Opera tors add, modify, show Parame ters SER VER SV C XX Input Parameter Description V alue/Field Size Default [AlarmNumFiles] Number of alarm files ( within the flash file system) ...

  • Cabletron Systems 6A000/ZX-250 - page 31

    SmartCell 6A000/ZX-250 Reference M anual 2-7 Console Commands Description s [Alarm Config file] Name of the file that con tains the current configuration o f the alarm message buff er . alarmc.db [Alarm Filename] Base name of the set of files within the flash file system where alarm messages are stored. Alarm message file names are co mposed of the ...

  • Cabletron Systems 6A000/ZX-250 - page 32

    2-8 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Exam ples switch_prompt # add alarmconfig AlarmNumFiles(32) : StartFileNum(0) : NumFilesUsed(0) : NumAlarmsPerFile(8): switch_prompt # switch_prompt # modify alarmconfig AlarmNumFiles(32) : StartFileNum(0) : NumFilesUsed(0) : NumAlarmsPerFile(8): switch_prompt # switch_prompt # show alar ...

  • Cabletron Systems 6A000/ZX-250 - page 33

    SmartCell 6A000/ZX-250 Reference M anual 2-9 Console Commands AlarmV erbose Use AlarmV erbose to determine how much information is displayed in the alarm messages. Opera tors modify, show Parame ter Description s Exam ples switch_prompt # modify alarmverbose Mode(On): off Setting Alarm Verbose Mode to Off switch_prompt # switch_prompt # show alarmv ...

  • Cabletron Systems 6A000/ZX-250 - page 34

    2-10 SmartCell 6A000/ZX-250 Reference Manual Console Com mands BUSClient Use BUSClient (broadcast and unknown server client) to manage the mapping between the BUSELAN and the LANE clients that have joined the BUSELAN. Clients are uniq uely identified by their LECId. Opera tors delete, show Parame ters Description s SER VER SV C X Input Parameter De ...

  • Cabletron Systems 6A000/ZX-250 - page 35

    SmartCell 6A000/ZX-250 Refere nce Manual 2-11 Console Commands Exam ples switch_prompt # delete busclient ELANNumber(0) : LECId(0) : 14 LECId : 14 ATMAddress : 39:00:00:00:00:00:00:00:20:D4:14:11:80:00:20:D4:00:D6:C0:00 Confirm(y/n)? : y switch_prompt # switch_prompt # show busclient 0 Client table entries for ELAN ELAN000 ========================= ...

  • Cabletron Systems 6A000/ZX-250 - page 36

    2-12 SmartCell 6A000/ZX-250 Reference Manual Console Com mands BUSELAN Use BUSELAN (broadcast and unkn own server emulated LAN) to determine the characteristics of the specified ELAN maintained by the BUS. If the corresponding LESELAN exists, it should be iden tical. Opera tors add, delete, modify, show SER VER SV C X ...

  • Cabletron Systems 6A000/ZX-250 - page 37

    SmartCell 6A000/ZX-250 Refere nce Manual 2-13 Console Commands Parame ters Input Parameter Description V alue/Field Size Default [ELANNumber] Numb er of the ELAN to which the BUS belongs. 0- 127 ALL [ELANName] Name of the ELAN to which the BUS belongs. Up to 32 characters ELAN000 [ConnectMethod] T ype of connection u sed. PVC, SVC SVC [ELANT ype] D ...

  • Cabletron Systems 6A000/ZX-250 - page 38

    2-14 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Description s Exam ples switch_prompt # add buselan ELANNumber(0) : 102 ELANName(ELAN102) : ConnectMethod(SVC) : ELANType(802.3) : Multipoint(YES) : MTU(1516) : switch_prompt # switch_prompt # delete buselan ELANNumber(0) : 3 ELAN Number : 3 ELAN Name : ELAN003 ATM Address : 39:00:00:00 ...

  • Cabletron Systems 6A000/ZX-250 - page 39

    SmartCell 6A000/ZX-250 Refere nce Manual 2-15 Console Commands The example below changes ELAN102 fr om an Ethernet BUSELAN to a T oken Rin g BUSELAN, changing the MTU to reflect the chang e in ELAN type. It assumes the LES has already been changed. switch_prompt # modify buselan 102 ELANName(ELAN102) : ConnectMethod(svc) : ELANType(802.3) : 802.5 M ...

  • Cabletron Systems 6A000/ZX-250 - page 40

    2-16 SmartCell 6A000/ZX-250 Reference Manual Console Com mands BUSLECStat Use BUSLECStat (broadcast and unkn own server LAN em ulation client statistics) to view traffi c statistics for all or specified clients that have joined the BUSELAN. Opera tor show Parame ters SER VER SV C X Input Parameter Description V alue/Field Size Default [ELANNumber] ...

  • Cabletron Systems 6A000/ZX-250 - page 41

    SmartCell 6A000/ZX-250 Refere nce Manual 2-17 Console Commands Description Exam ple switch_prompt # show buslecstat ELANNumber(0) : LECId(0) : Client statistics for ELAN ELAN000 =========================================================================== LECId : 1 ATM address : 39:00:00:00:00:00:00:00:20:D4:14:2F:00:00:20:D4:14:2F:00:00 Receives : 1 ...

  • Cabletron Systems 6A000/ZX-250 - page 42

    2-18 SmartCell 6A000/ZX-250 Reference Manual Console Com mands BUSStat Use BUSStat (broadcast and unkno wn server statistics) to view statistics that the BUS maintains for each ELAN. Opera tors show, clear Parame ters SER VER SV C X Input Parameter Description V alue/Field Size Default [ELANNumber] N umber of the EL AN to which the BUS belongs. 0-1 ...

  • Cabletron Systems 6A000/ZX-250 - page 43

    SmartCell 6A000/ZX-250 Refere nce Manual 2-19 Console Commands Description s Exam ples switch_prompt # show busstat 3 ELAN ELAN003 Statistics Out Octets : 450432 Out Unicast : 7030 Out Multicast : 3 In Octets : 450432 In Unicast : 7030 In Multicast : 3 Frame Timeouts : 0 VCC Rejects : 0 switch_prompt # switch_prompt # clear busstat ELANNumber(ALL): ...

  • Cabletron Systems 6A000/ZX-250 - page 44

    2-20 SmartCell 6A000/ZX-250 Reference Manual Console Com mands CACParams Use CACParams (call adm issi on control parameters) to d etermine the allocation of bandwid th to SVCs (switched virtual circuits) an d PVCs (permanent vi rtual circui ts) for individ ual ports on the s witch. Opera tors modify, show Parame ters SER VER SV C XX Paramet er Desc ...

  • Cabletron Systems 6A000/ZX-250 - page 45

    SmartCell 6A000/ZX-250 Refere nce Manual 2-21 Console Commands Description s Exam ples switch_prompt # modify cacparams PortNumber :( ALL ): a2 AllocScheme :( ) : moderate switch_prompt # switch_prompt # modify cacparams PortNumber :( ALL ): a3 AllocScheme :( ) : liberal switch_prompt # switch_prompt # show cacparams PortNumber :( ALL ): Port# Allo ...

  • Cabletron Systems 6A000/ZX-250 - page 46

    2-22 SmartCell 6A000/ZX-250 Reference Manual Console Com mands CACStat Use CACStat to see the CAC (call admission control) statistics. Opera tor show Parame ters SER VER SV C XX Input Parameter Description V alue/Field Size Default [PortNumber] Port number on the sw itch. ALL, A1...A4, B1. ..B3, C1...C4, D1...D4 ALL Output Parameter Description [Ba ...

  • Cabletron Systems 6A000/ZX-250 - page 47

    SmartCell 6A000/ZX-250 Refere nce Manual 2-23 Console Commands Description Exam ples switch_prompt # show cacstat PortNumber(ALL) : Port# Bandwidth Available Bandwidth Allocated (In Kb/s) (In Kb/s) Total CBR RTVBR NRTVBR UBR ============================================================================ A1 136393 823 0 0 823 0 A2 136393 823 0 0 823 0 ...

  • Cabletron Systems 6A000/ZX-250 - page 48

    2-24 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Client Use Client to determine all or local LANE (LAN em ulation) and IP/A TM (IP over A TM) clients on the switch. Opera tors delete, restart, show Parame ters In the Ou tput Param eter table bel ow , (</d>) appears next to p arameters that are available only throu gh the show cl ...

  • Cabletron Systems 6A000/ZX-250 - page 49

    SmartCell 6A000/ZX-250 Refere nce Manual 2-25 Console Commands Description s [LECS Address] (</d>) A TM address of the LECS. [LES Address] (</d>) A TM address of the LANE server . [LAN T ype] (</d>) T ype of ELAN. [MTU] (</d>) Maximum transfer unit assigned for this client. [IP NetMask] (</d>) IP netmask ass igned to t ...

  • Cabletron Systems 6A000/ZX-250 - page 50

    2-26 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Exam ples switch_prompt # delete client 4 IP/ATM Client4 Address: 39:00:00:00:00:00:00:00:00:00:14:15:00:00:00:7A:01:01:5B:00 Confirm(y/n)?:y switch_prompt # switch_prompt # show client ClientNumber(ALL) : Client Type IP Address Server Type Server Conn Status =========================== ...

  • Cabletron Systems 6A000/ZX-250 - page 51

    SmartCell 6A000/ZX-250 Refere nce Manual 2-27 Console Commands W ith the following example (</d>) , notice how y ou get the s ame amount of detail whether you sp ecify th e client or accept the default “ALL”: switch_prompt # show client /d ClientNumber(ALL) : LANE Client 1 ================================================================== ...

  • Cabletron Systems 6A000/ZX-250 - page 52

    2-28 SmartCell 6A000/ZX-250 Reference Manual Console Com mands ClientARP Use ClientARP (client address resolution protocol) to view the mapping of the MAC (media access control) or IP addresses to an A TM address for LANE (LAN emulation) or IP/A TM (IP over A TM) clients. Opera tor show Parame ters SER VER SV C XX Input Parameter Description V alue ...

  • Cabletron Systems 6A000/ZX-250 - page 53

    SmartCell 6A000/ZX-250 Refere nce Manual 2-29 Console Commands Description Exam ple switch_prompt # show clientarp ClientNumber(ALL) : LANE Client 0 ARP Table MAC Address ATM Address ============================================================================= 00:20:D4:14:15:00 39:00:00:00:00:00:00:00:20:D4:14:15:00:00:20:D4:14:15:00:02 IP/ATM Clie ...

  • Cabletron Systems 6A000/ZX-250 - page 54

    2-30 SmartCell 6A000/ZX-250 Reference Manual Console Com mands ClientStat Use ClientStat (client stati stics) to view LANE (LAN emulation) o r IP/A TM (IP ov er A TM) clien t stati stics. Opera tor show Parame ters In the Ou tput Param eter table bel ow , (</d>) appears next to p arameters that are available only throu gh the show clientstat ...

  • Cabletron Systems 6A000/ZX-250 - page 55

    SmartCell 6A000/ZX-250 Refere nce Manual 2-31 Console Commands [Broadcast Packets] (</d>) Number of br oadcast packets received or tran smitted. [Error Packets] (</d>) Number of error packets received or transmitted. [Dropped Packets] (</d>) Number of received or transmitted packets dropped. [Bytes T ransmitted] (</d>) Numbe ...

  • Cabletron Systems 6A000/ZX-250 - page 56

    2-32 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Description Exam ples The examples show statisti cs for all clients, detail (</d>) for all clients, an IP/A TM client, and a LANE client . Operat or Paramet ers/Permis sions Description show clientstat (/d) [ClientNumber] <clientnumber> All Displays the packet count statisti ...

  • Cabletron Systems 6A000/ZX-250 - page 57

    SmartCell 6A000/ZX-250 Refere nce Manual 2-33 Console Commands switch_prompt # show clientstat ClientNumber(ALL): Client Type RxPkts TxPkts RxOctets TxOctets ============================================================================ 1 LANE 0 0 0 0 3 IP/ATM 0 0 0 0 switch_prompt # switch_prompt # show clientstat /d ClientNumber(ALL): Stats for LAN ...

  • Cabletron Systems 6A000/ZX-250 - page 58

    2-34 SmartCell 6A000/ZX-250 Reference Manual Console Com mands switch_prompt # show clientstat 3 Stats for IP/ATM client 3 ============================================================================ Rx Stats Bytes Received : 0 Unicast Packets : 0 Multicast Packets : 0 Broadcast Packets : 0 Error Packets : 0 Dropped Packets : 0 Tx Stats Bytes Trans ...

  • Cabletron Systems 6A000/ZX-250 - page 59

    SmartCell 6A000/ZX-250 Refere nce Manual 2-35 Console Commands ClientVC Use ClientVC (client virtual circuit) to view which VCs are associated with a particular local LANE or IP over A TM client's ARP (address resolutio n protocol) entries. Clien tVC is similar to ClientAR P , except th at it also includes details of VPI/VCI numbers. Opera tor ...

  • Cabletron Systems 6A000/ZX-250 - page 60

    2-36 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Description Exam ple switch_prompt # show clientvc ClientNumber(ALL) : LANE Client 0 VC Table MAC Address VPI/VCI ATM Address =========================================================================== 00:02:D4:14:22:80 0/2453 39:00:00:00:00:00:00:00:20:D4:14:15:00:00:20:D4:14:22:80:00 ...

  • Cabletron Systems 6A000/ZX-250 - page 61

    SmartCell 6A000/ZX-250 Refere nce Manual 2-37 Console Commands Community Use Commu nity to g roup NMS (n etwork managem ent sys tem) hosts by pr ivilege l evel. Hosts are collec tively called communit ies, and their privilege l evel determines th e type of informatio n access permitted by the switch. The s witch provides access to th e information ...

  • Cabletron Systems 6A000/ZX-250 - page 62

    2-38 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Description s Exam ples switch_prompt # add community Name() : boris IpAddr() : 90.1.1.1 Priviledge(read) : switch_prompt # switch_prompt # show community Community Name IP Address Privilege =========================================================================== ILMI 0.0.0.0 READ bo ...

  • Cabletron Systems 6A000/ZX-250 - page 63

    SmartCell 6A000/ZX-250 Refere nce Manual 2-39 Console Commands Confi g Use Config to erase the confi gur ation information on the SmartCell ZX-250. Before using the clear config command, y ou shoul d backup the s witch co nfigurat ion usin g the backup switch command. See pag e 182. Opera tor clear Parame ters SER VER SV C XX Input Para meter Descr ...

  • Cabletron Systems 6A000/ZX-250 - page 64

    2-40 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Description Exam ple switch_prompt # clear config You should backup your configuration using the "backup switch" command, in case you want to recover this configuration Continuing will permanently erase the current switch configuration, and requires a switch reboot. Are you su ...

  • Cabletron Systems 6A000/ZX-250 - page 65

    SmartCell 6A000/ZX-250 Refere nce Manual 2-41 Console Commands ELAN Use ELAN (emulated local area network) to create or delete ELANs on the switch. This is a qu ick configuration method of managing ELAN serv er entries within one comman d. For details of how to create or delete these entries individually , see “BUSEL AN”, “LECSELAN”, and ? ...

  • Cabletron Systems 6A000/ZX-250 - page 66

    2-42 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Description s Outpu t Paramet er Description [LES Address] A TM address of the LANE server . [Distribute VPI/VCI] VPI/V CI values of the control direct VCC or m ulticast send VCC. [Distr ibute Metho d] Indicat es whether th e control distri bute VCC is establ ished for ALL cl ients or o ...

  • Cabletron Systems 6A000/ZX-250 - page 67

    SmartCell 6A000/ZX-250 Refere nce Manual 2-43 Console Commands Exam ples switch_prompt # add elan ELANNumber(0) : 11 ELANName(ELAN011) : ConnectMethod(SVC) : ELANType(802.3) : Multipoint(YES) : MTU(1516) : Distribute(PROXY) : switch_prompt # switch_prompt # delete elan ELANNumber(0): 11 Confirm(y/n)?: y switch_prompt # A switch_prompt # show elan 0 ...

  • Cabletron Systems 6A000/ZX-250 - page 68

    2-44 SmartCell 6A000/ZX-250 Reference Manual Console Com mands B switch_prompt # add leselan 4 ELANName(ELAN004) : ConnectMethod(SVC) : ELANType(802.3) : Multipoint(YES) : MTU(1516) : Distribute(PROXY) : BUSATMAddress() : switch_prompt # switch_prompt # add buselan 4 ELANName(ELAN004) : ConnectMethod(SVC) : ELANType(802.3) : Multipoint(YES) : MTU(1 ...

  • Cabletron Systems 6A000/ZX-250 - page 69

    SmartCell 6A000/ZX-250 Refere nce Manual 2-45 Console Commands Exit Use Exit to disconnect your console con nection from the switch. Opera tor exit Parame ters There are no parameters for th is command. Just type exit at the switch prompt. Description Exam ple switch_prompt # exit Exiting SmartCell 2X Command Console SmartCell 2X version 1.2(c) Cab ...

  • Cabletron Systems 6A000/ZX-250 - page 70

    2-46 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Firmw are Use Firmware to re-prog ram the switch application sof tware when you want to p erform a switch u pgrade. Opera tor update Parame ters Description SER VER SV C XX Input Parameter Description V al ue/Field Size Default [ServerIP] IP address of server with the u pdated image fil ...

  • Cabletron Systems 6A000/ZX-250 - page 71

    SmartCell 6A000/ZX-250 Refere nce Manual 2-47 Console Commands Exam ple SmartCell ZX # update firmware ServerIP() : 204.95.77.240 Path() : server/server.ima You are updating the code image in the flash. Are you sure this is what you want to do? Confirm(y/n)?: y Verifying bootfile server/server.ima on 204.95.77.240...passed. Erasing Flash. Using TFT ...

  • Cabletron Systems 6A000/ZX-250 - page 72

    2-48 SmartCell 6A000/ZX-250 Reference Manual Console Com mands History Use Histo ry to view the l ast five co mmands you ent ered. Ent er History i f you want t o use one of those commands again. Opera tor history Parame ters This command has n o parameters. J ust type history at the swi tch pro mpt. Description Exam ple switch_prompt # history 5- ...

  • Cabletron Systems 6A000/ZX-250 - page 73

    SmartCell 6A000/ZX-250 Refere nce Manual 2-49 Console Commands IISPRoute Use IISP Route (in terim int er-switch s ignaling protocol ) to man ipulate the IISP rou tes confi gured on the swit ch (se e “UNIRoute” for further routing commands). Opera tors add, delete, show, flush Parame ters SER VER SV C XX Input Parameter Description V alue/Field ...

  • Cabletron Systems 6A000/ZX-250 - page 74

    2-50 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Description s Y ou can create a default I ISP route if you enter only the port n umber and a weighting value [Metric] for the route (see Examples below). Y ou can set multiple local configurat ions to choose one of th e parall el links f or next-h op rou ting. A weight of “1” assign ...

  • Cabletron Systems 6A000/ZX-250 - page 75

    SmartCell 6A000/ZX-250 Refere nce Manual 2-51 Console Commands Exam ples switch_prompt # add iisproute AtmAddress() : 39:00:00:00:00:00:00:00:00:00:11:22:33 PortNumber(A1): Metric(1) : switch_prompt # add iisproute AtmAddress() : 39:00:00:00:00:00:00:00:00:00:11:22:44 PortNumber(A1): Metric(1) : 2 switch_prompt # add iisproute AtmAddress() : 39:00: ...

  • Cabletron Systems 6A000/ZX-250 - page 76

    2-52 SmartCell 6A000/ZX-250 Reference Manual Console Com mands ILMIAdminStatus Use ILMIAdminStatus (integrated local m anagement interface administration status) to control the operation of the ILMI pr otocol on every por t on th e switch . Opera tors modify, show Parame ters Description s SER VER SV C XX Input Parameter Description V alue/Field Si ...

  • Cabletron Systems 6A000/ZX-250 - page 77

    SmartCell 6A000/ZX-250 Refere nce Manual 2-53 Console Commands Exam ples switch_prompt # modify ilmiadminstatus PortNum :( ALL ): a1 IlmiAdminStatus :( enable ): disable switch_prompt # switch_prompt # show ilmiadminstatus PortNum :( ALL ): Port# ILMI Admin Status =========================================================================== A1 disabl ...

  • Cabletron Systems 6A000/ZX-250 - page 78

    2-54 SmartCell 6A000/ZX-250 Reference Manual Console Com mands IP Address Use IP Address to change IP addr esses of t he Ethernet port and IP netmask on t he switch. Opera tor modify Parame ters Description SER VER SV C XX Input Parameter Description V alue/Field Size Default [IP Address] IP addres s of the Ethernet port. dot decimal/ 7-15 characte ...

  • Cabletron Systems 6A000/ZX-250 - page 79

    SmartCell 6A000/ZX-250 Refere nce Manual 2-55 Console Commands Exam ple switch_prompt # modify ipaddress IPAddress(200.30.72.122) : 1.1.1.11 IPNetMask(255.255.255.0) : Confirm(y/n)?: y Changing IP Address on System. Telnet Session (if any) will be lost. switch_prompt # ...

  • Cabletron Systems 6A000/ZX-250 - page 80

    2-56 SmartCell 6A000/ZX-250 Reference Manual Console Com mands IP A TMARP Use IP A TMA RP (IP over A TM address resolution protocol) to see IP/A TM ARP server tables. Unlike LANE client or IP/A TM (IP over A T M) client ARP tables (see show clientarp ), these ARP entries are registered with the IP/A TM ARP server . Opera tor show Parame ter Descrip ...

  • Cabletron Systems 6A000/ZX-250 - page 81

    SmartCell 6A000/ZX-250 Refere nce Manual 2-57 Console Commands IP A TMClient Use IP A TMClient (IP over (/) A TM client) to manipula te either local IP/A TM clients or IP/A TM clients acting as an IP/A TM server , or if you want to configure an IP/A TM client on the IP/A TM server itself. Opera tors add, modify, ( show client ) SER VER SV C XX ...

  • Cabletron Systems 6A000/ZX-250 - page 82

    2-58 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Parame ters Input Parameter Description V al ue/Field Size Default [ClientNum ber] Number of the client. 0-127 ALL [ServerT yp e] IP/A TM server type. LOCAL, EXTERNAL, NONE NONE [ServerAddress] A TM address of the IP/A TM server . If [ServerT ype ]states NON E or LOCAL, then accept the ...

  • Cabletron Systems 6A000/ZX-250 - page 83

    SmartCell 6A000/ZX-250 Refere nce Manual 2-59 Console Commands Description s Exam ples switch_prompt # add ipatmclient ClientNumber(0) : 50 ServerType(NONE) : local ServerAddr() : IpAddr() : 101.1.1.50 NetMask(255.0.0.0): MTU(9180) : switch_prompt # switch_prompt # add ipatmclient ClientNumber(0) : 1 ServerType(NONE): external ServerAddress() : 39: ...

  • Cabletron Systems 6A000/ZX-250 - page 84

    2-60 SmartCell 6A000/ZX-250 Reference Manual Console Com mands NetMask(255.0.0.0): MTU(9180) : switch_prompt # switch_prompt # modify ipatmclient ClientNumber(0) : 50 ServerType(LOCAL) : ServerAddr() : IpAddr(101.1.1.50): 101.1.1.150 NetMask(255.0.0.0): MTU(9180) : switch_prompt # show client switch_prompt # ...

  • Cabletron Systems 6A000/ZX-250 - page 85

    SmartCell 6A000/ZX-250 Refere nce Manual 2-61 Console Commands IP A T MPVC Use IP A TMPVC (IP over A TM permanent virtual circuit) to man ipulate IP/A TM PVC clients on a PVC IP/A TM VLAN (virtual LAN). Opera tors add, delete, show Parame ters SER VER SV C XX Input Parameter Description V alue/Field Size Default [ClientNum ber] Number of the client ...

  • Cabletron Systems 6A000/ZX-250 - page 86

    2-62 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Description s Exam ples switch_prompt # add pvc ConnType(PTP) : LowPort(A1) : LowVPI(0) : LowVCI(33) : 130 HighPort(A1) : b4 HighVPI(0) : HighVCI(34) : 130 Fwd iptorIndex(1) : BkwTrafficDescriptorIndex(1) : switch_prompt # switch_prompt # show pvc all CrossConnectId(ALL) : Conn Conn Tra ...

  • Cabletron Systems 6A000/ZX-250 - page 87

    SmartCell 6A000/ZX-250 Refere nce Manual 2-63 Console Commands switch_prompt # show client 0 IP/ATM Client 0 =========================================================================== Client State : Operational Client Address : 39:00:00:00:00:00:00:00:20:D4:14:22:80:00:00:0A:01:01:02:00 Server : is none MTU : 9180 IP Address : 10.1.1.2 IP NetMask ...

  • Cabletron Systems 6A000/ZX-250 - page 88

    2-64 SmartCell 6A000/ZX-250 Reference Manual Console Com mands I PAT M S t a t Use IP A TMStat (IP over A TM statistics) to view details of the IP/A TM (IP over A TM) client server . Opera tor show Parame ters SER VER SV C X Input Parameter Description V alue/Field Size De fault [ClientNum ber] Number of the client. 0-127 ALL Outpu t Paramet er Des ...

  • Cabletron Systems 6A000/ZX-250 - page 89

    SmartCell 6A000/ZX-250 Refere nce Manual 2-65 Console Commands Description Exam ples switch_prompt # show ipatmstat ClientNumber(ALL): Client ArpReqs ArpReps ArpUnrch ArpNaks =========================================================================== 50 0 0 0 0 51 0 0 0 0 switch_prompt # switch_prompt # show ipatmstat 50 Stats for IP/ATM server 50 ...

  • Cabletron Systems 6A000/ZX-250 - page 90

    2-66 SmartCell 6A000/ZX-250 Reference Manual Console Com mands LANEClient Use LANEClient (local area network emulation client) to allow inband man agement of LANE clients on the switch. Opera tors add, modify, (show client) Parame ters SER VER SV C XX Input Parameter Description V al ue/Field Size Default [ClientNum ber] Number of the client. 0-127 ...

  • Cabletron Systems 6A000/ZX-250 - page 91

    SmartCell 6A000/ZX-250 Refere nce Manual 2-67 Console Commands Description Exam ples switch_prompt # add laneclient ClientNumber(0) :100 LanName(ELAN100): ServerType(LECS): ServerAddress() : 39:00:00:00:00:00:11:11:11:11:11:11:11:00:11:22:22:44:55:01 IPAddress() : 101.1.1.100 NetMask(255.0.0.0): MTU(1516) : switch_prompt # switch_prompt # modify la ...

  • Cabletron Systems 6A000/ZX-250 - page 92

    2-68 SmartCell 6A000/ZX-250 Reference Manual Console Com mands LECS Use LECS (local area network emulation configur ation server) to manage the operationa l status of the LECS on the networ k. Opera tors start, stop Parame ters This command has n o parameters. J ust type start lecs or stop lecs at the switc h prompt. Description s The status of the ...

  • Cabletron Systems 6A000/ZX-250 - page 93

    SmartCell 6A000/ZX-250 Refere nce Manual 2-69 Console Commands Exam ples switch_prompt # start lecs NOTICE - 'LECS' ***** LECS started ***** switch_prompt # switch_prompt # stop lecs NOTICE - 'LECS' ***** LECS exiting ***** switch_prompt # ...

  • Cabletron Systems 6A000/ZX-250 - page 94

    2-70 SmartCell 6A000/ZX-250 Reference Manual Console Com mands LECSAddress Use LECSAddress (LAN emulation configur ation server A TM address) to configure addresses on the switch. This address identifies th e LECS on the network that will be contacted for information when LAN emulation is used. While there can be many switches in a network, there s ...

  • Cabletron Systems 6A000/ZX-250 - page 95

    SmartCell 6A000/ZX-250 Refere nce Manual 2-71 Console Commands Exam ples switch_prompt # add lecsaddress LECSAddress : 39:00:00:00:00:00:11:22:33:44:55:66:77:11:22:33:44:55:66:01 switch_prompt # switch_prompt # delete lecsaddress Confirm? (y/n): y switch_prompt # switch_prompt # modify lecsaddress LECSAddress (39:00:00:00:00:00:11:22:33:44:55:66:77 ...

  • Cabletron Systems 6A000/ZX-250 - page 96

    2-72 SmartCell 6A000/ZX-250 Reference Manual Console Com mands LECSELAN Use LECSELAN (LAN emulation configur ation server emulated LAN) to m anage the LECS entries on th e ELAN. Opera tors add, delete, modify, show Parame ters SER VER SV C X Paramet er Descri ption V alue/Field Size Default [ELANNumber] Number of the ELAN to which LECS belongs. 0 - ...

  • Cabletron Systems 6A000/ZX-250 - page 97

    SmartCell 6A000/ZX-250 Refere nce Manual 2-73 Console Commands Description s Exam ples switch_prompt # add lecselan ELANNumber(0) : 4 ELANName(ELAN004) : LESAddress(39:00:00:00:00:00:00:00:00:00:14:15:00:00:20:D4:14:15:04:02): ELANType(802.3) : MTU(1516) : TLVSet() : switch_prompt # switch_prompt # delete lecselan ELANNumber(0) : 4 ELAN 4 Configure ...

  • Cabletron Systems 6A000/ZX-250 - page 98

    2-74 SmartCell 6A000/ZX-250 Reference Manual Console Com mands switch_prompt # modify lecselan ELANNumber(0) : ELANName(elan1) : LESAddress(39:00:00:00:00:00:00:00:00:00:14:15:00:00:20:D4:14:15:00:02): 39:00:00:00:00:00:00:00:00:00:14:15:00:00:20:D4:14:15:00:04 ELANType(802.3) : MTU(1516) : TLVSet() : switch_prompt # switch_prompt # show lecselan E ...

  • Cabletron Systems 6A000/ZX-250 - page 99

    SmartCell 6A000/ZX-250 Refere nce Manual 2-75 Console Commands LECSELANLEC Use LECSELANLEC (LAN emulation configuration server emulated LAN LANE client) to manage the way LANE clients are assigned to a specified ELAN on the LECS. Opera tors add, delete, modify, show Parame ters SER VER SV C X Paramet er Description V alue/Field Size Default [LECAdd ...

  • Cabletron Systems 6A000/ZX-250 - page 100

    2-76 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Description s Operat or Paramet ers/Permis sions Description add lecselanlec [LECAddress] < clientatmaddress > [MACAddress/RouteDesc] <clientmacaddress/routedescriptor> [ELANNumber] <elannumber> Administrator Adds a LANE client to an existing ELAN o n the LECS. The cli ...

  • Cabletron Systems 6A000/ZX-250 - page 101

    SmartCell 6A000/ZX-250 Refere nce Manual 2-77 Console Commands Exam ples switch_prompt # add lecselanlec LECAddress: 39:00:00:00:00:00:00:00:00:00:14:7B:00:00:20:D4:14:7B:00:01 MACAddress/RouteDesc: 01:02:03:04:05:06 ELANNumber(0): 1 switch_prompt # switch_prompt # delete lecselanlec LECAddress/MACddress/RouteDesc(): 39:00:00:00:00:00:00:00:20:D4:1 ...

  • Cabletron Systems 6A000/ZX-250 - page 102

    2-78 SmartCell 6A000/ZX-250 Reference Manual Console Com mands LECSStat Use LECSStat (LAN emulation configu ration server statistics) to see statistical information about incoming configuratio n req uests to the LECS. Opera tor show SER VER SV C X ...

  • Cabletron Systems 6A000/ZX-250 - page 103

    SmartCell 6A000/ZX-250 Refere nce Manual 2-79 Console Commands Parame ters Output Parameter Description [Successful Config uration Reque sts] Numb er of successful configur ation requests. [Bad Conf iguratio n Request s] Number o f bad conf iguratio n reques ts. [Invalid R equest P arameter s] Numb er of con figuratio n reques ts with invalid r equ ...

  • Cabletron Systems 6A000/ZX-250 - page 104

    2-80 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Description Exam ple switch_prompt # show lecsstat Statistics on LECS =========================================================================== Successful Configuration Requests : 3 Bad Configuration Requests : 0 Invalid Request Parameters : 1 Insufficient Resources : 0 Access Denied ...

  • Cabletron Systems 6A000/ZX-250 - page 105

    SmartCell 6A000/ZX-250 Refere nce Manual 2-81 Console Commands LECSTL VParam Use LECSTL VParam (LAN emul ation conf iguratio n server t ype, length , and value parameters) to remove a specifi c TL V parameter from the TL V set on the LEC S. Opera tor delete Parame ters Description Exam ples The show lecstlvset example i s used here to show ho w del ...

  • Cabletron Systems 6A000/ZX-250 - page 106

    2-82 SmartCell 6A000/ZX-250 Reference Manual Console Com mands switch_prompt # show lecstlvset TlvsetNumber(ALL) : 2 TlvIndex TlvDescription Value =========================================================================== TLVSet 2 : 1 Control Timeout 200 2 Max Unknown Frame Time 4 6 Arp Aging Time 250 7 Forward Delay 30 switch_prompt # switch_prom ...

  • Cabletron Systems 6A000/ZX-250 - page 107

    SmartCell 6A000/ZX-250 Refere nce Manual 2-83 Console Commands LECSTL VSet Use LECSTL VSet (LAN emulation configurati on server type, length, and valu e set) to manipulate TL V parameters on the LECS. A TL V set is a collection of TL V parameters associated with an ELAN (emulated LAN). Opera tors add, delete, modify, show Parame ters SER VER SV C X ...

  • Cabletron Systems 6A000/ZX-250 - page 108

    2-84 SmartCell 6A000/ZX-250 Reference Manual Console Com mands [ArpResponseT i me] Maximum time that the LEC expects a request/response cycle to take. se conds/1- 30 n/a [FlushT imeout] Time l imit on flush re sponse afte r flush requ est h as b een s ent , be fore taking recovery action. second s/1-4 n/ a [PathSwitchingDelay] Time since send ing a ...

  • Cabletron Systems 6A000/ZX-250 - page 109

    SmartCell 6A000/ZX-250 Refere nce Manual 2-85 Console Commands Description s Operat or Paramet ers/Permis sions Description add lecstlvset [TLVSetNumber] < tlvsetnumber > [ControlTimeout] < controltimeout > [MaxUnknownFrameCount] < maxunknframecount > [MaxUnknownFrameTime] < maxunknframetime > [VCCTimeout] < vcctimeout &g ...

  • Cabletron Systems 6A000/ZX-250 - page 110

    2-86 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Exam ples switch_prompt # add lecstlvset TLVSetNumber[1-32767](1) : 3 ControlTimeout[10-300]() : 200 MaxUnknownFrameCount[1-10]() : 5 MaxUnknownFrameTime[1-60]() : 50 VCCTimeout[0-65535]() : 50000 MaxRetryCount[0-2]() : 1 ArpAgingTime[10-300]() : 250 ForwardDelay[4-30]() : 27 ArpRespons ...

  • Cabletron Systems 6A000/ZX-250 - page 111

    SmartCell 6A000/ZX-250 Refere nce Manual 2-87 Console Commands 3 Max Unknown Frame Time 40 4 VCC Timeout 40000 5 Max Retry Count 2 6 Arp Aging Time 200 7 Forward Delay 20 8 ARP Response Time 20 9 Flush Timeout 3 10 Path Switching Delay 5 11 Local Seg Id 2500 12 Multicast Send VCC Type 2 15 Connection Complete Time 6 switch_prompt # ...

  • Cabletron Systems 6A000/ZX-250 - page 112

    2-88 SmartCell 6A000/ZX-250 Reference Manual Console Com mands LECSVCC Use LECSVCC (LAN emulation conf iguration server virtual ch annel connection) to view the VCCs that are waiting to join t he LECS. These VCCs are set u p by the LANE clie nt (or other entity) as p art of the LECS connectio n. As soon as they join the LECS , the VCCs will no long ...

  • Cabletron Systems 6A000/ZX-250 - page 113

    SmartCell 6A000/ZX-250 Refere nce Manual 2-89 Console Commands Exam ple switch_prompt # show lecsvcc VC Type VPI/VCI =========================================== PVC 0/31 PVC 0/33 SVC 0/112 switch_prompt # ...

  • Cabletron Systems 6A000/ZX-250 - page 114

    2-90 SmartCell 6A000/ZX-250 Reference Manual Console Com mands LES Use LES (LAN emulation server) to contr ol the status of the LES and BUS (broad cast and unknown serv er) servers which are co-located. Y o u can control both servers using LES. Opera tors start, stop Parame ters This command has n o parameters. J ust type start les or stop les at t ...

  • Cabletron Systems 6A000/ZX-250 - page 115

    SmartCell 6A000/ZX-250 Refere nce Manual 2-91 Console Commands LESARP Use LESARP (LAN emulation server address resolution protocol) to see details of the clients registered with the LES. LESARP also gives the MAC (media ac cess control) address of the client. Opera tor show Parame ter Description Exam ple switch_prompt # show lesarp ELANNumber(0) : ...

  • Cabletron Systems 6A000/ZX-250 - page 116

    2-92 SmartCell 6A000/ZX-250 Reference Manual Console Com mands LESClient Use LESClient (LAN emulation s erver client) to determine m a pp ing between LESELANs and th e LANE (LAN emulation) clients that have joined the specified ELAN (emulated LAN). Clients are uniquely identified b y their LECId. Opera tors delete, show Parame ters SER VER SV C X I ...

  • Cabletron Systems 6A000/ZX-250 - page 117

    SmartCell 6A000/ZX-250 Refere nce Manual 2-93 Console Commands Description s Exam ples switch_prompt # delete lesclient ELANNumber (0): LECId (0) : 12 Confirm? (y/n) : y switch_prompt # switch_prompt # show lesclient ELANNumber (0): Client table entries for ELAN ELAN000 =========================================================================== LEC ...

  • Cabletron Systems 6A000/ZX-250 - page 118

    2-94 SmartCell 6A000/ZX-250 Reference Manual Console Com mands LESELAN Use LESELAN (LAN emulation server emulated LAN) to manage the pr operties of the specified ELAN maintained by the LES. If the corresponding BUSELAN exists, it should have the same characteristics as the LESELALN. Opera tors add, delete, modify, show Parame ters SER VER SV C X In ...

  • Cabletron Systems 6A000/ZX-250 - page 119

    SmartCell 6A000/ZX-250 Refere nce Manual 2-95 Console Commands Description s Outpu t Paramet er Description [A TM Address] A TM address of the LES on the ELAN. [Distribute VPI/VCI] VPI/V CI values of the control direct VCC or m ulticast send VCC. [Distri bute Method] Indicates wh ether the cont rol dist ribute VCC is establi shed for ALL cli ents o ...

  • Cabletron Systems 6A000/ZX-250 - page 120

    2-96 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Exam ples The followin g example creates ELAN 102 with default parameter s for LES: switch_prompt # add leselan ELANNumber(0) : 102 ELANName(ELAN102) : ConnectMethod(SVC) : ELANType(802.3) : Multipoint(YES) : MTU(1516) : Distribute(PROXY) : BUSATMAddress(39:00:00:00:00:00:00:00:20:D4:14 ...

  • Cabletron Systems 6A000/ZX-250 - page 121

    SmartCell 6A000/ZX-250 Refere nce Manual 2-97 Console Commands The following ex ample resets an ELAN with default parameters: switch_prompt # modify leselan ELANNumber(0) : 102 ELANName(ELAN102) : ConnectMethod(svc) : ELANType(802.3) : Multipoint(yes) : MTU(1516) : 9234 Distribute(proxy) : BUSATMAddress(39:00:00:00:00:00:00:00:20:D4:14:15:00:00:20: ...

  • Cabletron Systems 6A000/ZX-250 - page 122

    2-98 SmartCell 6A000/ZX-250 Reference Manual Console Com mands LESLECStat Use LESLECStat (LAN emulation server LAN emu lation client statistics) to view details of control traf fic between the LES and its LANE (LAN emulation) clients. Y ou can see information on all or specified clients that are on that specified ELAN (emulated LAN). Opera tor show ...

  • Cabletron Systems 6A000/ZX-250 - page 123

    SmartCell 6A000/ZX-250 Refere nce Manual 2-99 Console Commands Description Exam ples switch_prompt # show leslecstat ELANNumber(0) : LECId(0) : 3 Client 3 statistics for ELAN ELAN000 =========================================================================== ATM Address : 39:00:00:00:00:00:00:00:20:D4:14:22:80:00:20:D4:14:22:80:00 Receives : 2 Forw ...

  • Cabletron Systems 6A000/ZX-250 - page 124

    2-100 SmartCell 6A000/ZX-250 Reference Manual Console Com mands LESStat Use LESStat (LAN emulation server statistics) to manage the statistics that the LES maintains for each ELAN. Opera tors show, clear Parame ters SER VER SV C X Input Parameter Description V alue/Field Size Default [ELANNumber] Number of ELAN to which the LES belongs. 0- 127 ALL ...

  • Cabletron Systems 6A000/ZX-250 - page 125

    SmartCell 6A000/ZX-250 Referen ce Manual 2-101 Console Commands Description s [Reg. duplicate A TM destination errors] Duplicate A TM address errors for reg ister request. [Join insu f ficient resour ce errors] Insufficient res ources to grant errors for join re quest. [Reg. insuf ficient resour ce errors] Insuff icient resource s to grant errors f ...

  • Cabletron Systems 6A000/ZX-250 - page 126

    2-102 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Exam ples switch_prompt # show lesstat ELANNumber(ALL) : 102 ELAN : ELAN102 Statistics Join OK : 0 Join version not supported errors : 0 Reg. version not supported errors : 0 UnReg. version not supported errors : 0 Join invalid request param errors : 0 Reg. invalid request param errors ...

  • Cabletron Systems 6A000/ZX-250 - page 127

    SmartCell 6A000/ZX-250 Referen ce Manual 2-103 Console Commands Lo g Use Log to contro l log message record ing onto the log message buf fer . Opera tors start, stop Parame ters This command has n o parameters. Jus t type start log or stop log at the switch prompt. Description s Exam ples switch_prompt # start log Enabling logging into buffer at ti ...

  • Cabletron Systems 6A000/ZX-250 - page 128

    2-104 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Lo g AlarmMask Use LogAlarmMask to determ in e—by setting mask in g flags—which log messag es generate alarms. Opera tors modify, show Parame ters For more options see [FilterFlags] input parameter u nder “LogT race”. SER VER SV C XX Paramet er Description V alue/Field Size Def ...

  • Cabletron Systems 6A000/ZX-250 - page 129

    SmartCell 6A000/ZX-250 Referen ce Manual 2-105 Console Commands Description s Exam ples switch_prompt # modify logalarmmask Emergency(n): y Alert(n) : Critical(n) : Error(n) : Warning(n) : y Notice(n) : Info(n) : Debug(n) : Trace(n) : ALARM(n) : switch_prompt # switch_prompt # show logalarmmask SwitchNameFlags generating alarms for following log ty ...

  • Cabletron Systems 6A000/ZX-250 - page 130

    2-106 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Lo g Buf fer Use LogBuf fer if y ou want to record you r messages on the log mes sage buf fer . Opera tors modify, show, clear Parame ters SER VER SV C XX Input Parameter Des cription V alue/Field Size Default [LogBuf ferSize] Size of the message log buf fer in the switch memory . It i ...

  • Cabletron Systems 6A000/ZX-250 - page 131

    SmartCell 6A000/ZX-250 Referen ce Manual 2-107 Console Commands Description s Exam ples switch_prompt # modify logbuffer LogBufferSize(10240): 7000 switch_prompt # switch_prompt # show logbuffer Index(ALL) : ---------------------------------------------------- Num Mod SubMod T(h:m:s:ms) Msg ---------------------------------------------------- 0 HW ...

  • Cabletron Systems 6A000/ZX-250 - page 132

    2-108 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Lo g Buf ferSize Use LogBuff erSize to determine the size o f the log buf fer . Opera tor show Parame ter Description Exam ple switch_prompt # show logbuffersize Log Buffer Size: 7000 switch_prompt # SER VER SV C XX Paramet er Descri ption V alue/Field Size Default [LogBuf ferSize] Siz ...

  • Cabletron Systems 6A000/ZX-250 - page 133

    SmartCell 6A000/ZX-250 Referen ce Manual 2-109 Console Commands Lo g Print Use LogPrint to print log messages on the console. Opera tors modify, show Parame ters Description s SER VER SV C XX Input Parameter Des cription V alue/Field Size Default [Logpri nt] Enables or disabl es printi ng of log mess ages to the cons ole. ON/ OFF OFF Outpu t Parame ...

  • Cabletron Systems 6A000/ZX-250 - page 134

    2-110 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Exam ples switch_prompt # modify logprint LogPrint(OFF) : on switch_prompt # switch_prompt # show logprint Printing Log Messages on Console : ON switch_prompt # ...

  • Cabletron Systems 6A000/ZX-250 - page 135

    SmartCell 6A000/ZX-250 Referen ce Manual 2-111 Console Commands Lo g Tr a c e Use LogT race to control filtering and configuration parameters for logging and tracing messages. Opera tors modify, show Parame ters SER VER SV C XX Paramete r Description V alue/Field Size De fault [LocalPortNum] The port through which remote log trace clients can conne ...

  • Cabletron Systems 6A000/ZX-250 - page 136

    2-112 SmartCell 6A000/ZX-250 Reference Manual Console Com mands [Filter Parm V al] User-specified parameter value. Log trace filters messages so that only those with a parameter equal to the specified v alue are printed. Use in conjunction with [Filter Parm Pos] to iden tify in which position the parameter value sho uld appear . 10 characters -1 [F ...

  • Cabletron Systems 6A000/ZX-250 - page 137

    SmartCell 6A000/ZX-250 Referen ce Manual 2-113 Console Commands [Quiet mode] Suppresses the printing of messages to the console but continues to fo rward messages to clients. ON/ OFF ON [Start record] Starting record for message range. Lo g trace prints messages within specified range. If both starting and ending record numbers are set to infinity ...

  • Cabletron Systems 6A000/ZX-250 - page 138

    2-114 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Description s Notice messages o n ly 3 2 Information me s sages only 64 Debug mess ages only 128 T race messages only 256 Alarm messages only 512 Operat or Paramet ers/Permis sions Description modify logtrace [Filter Parm Pos] < filterparamposition > [Filter Search Str] < filt ...

  • Cabletron Systems 6A000/ZX-250 - page 139

    SmartCell 6A000/ZX-250 Referen ce Manual 2-115 Console Commands show logtrace All Displays the parameters of the currently configured log trace. Logged messages can also g enerate alarms, dependin g on how the log alarm mask is config ured. Setting the log trace open s a TCP port throug h which other log trace clients can co nnect and receive messa ...

  • Cabletron Systems 6A000/ZX-250 - page 140

    2-116 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Exam ples switch_prompt # modify logtrace LocalPortNum(6005) : LogBufferSize(1000) : 1300 OutputType(ascii) : EndRecordNum(-1) : FilterModid(0) : off FilterSubModid(0) : off FilterMsgid(0) : FilterParamVal(-1) : FilterParamPos(0) : FilterSearch() : FilterLevel(0) : FilterFlags(0) : Inp ...

  • Cabletron Systems 6A000/ZX-250 - page 141

    SmartCell 6A000/ZX-250 Referen ce Manual 2-117 Console Commands CONS Console specific HW Hardware specific ILMI ILMI mod ule IPSR IP over A TM Server LEC Lan Emulation Client LECS Lan Em ulation Conf iguration Serv er LES Lan Emulation Server S10D S10 Driver specific SIG Signaling SYS System specific VX VxW orks OS specific T able 2- 3 Software S u ...

  • Cabletron Systems 6A000/ZX-250 - page 142

    2-118 SmartCell 6A000/ZX-250 Reference Manual Console Com mands MODU LE ID - BE BEAR Br idged Ethern et Address Resoluti on Pro tocol fu nctions BECF Bridged Ethernet Co nfigurat ion sp ecific MODUL E ID - H W LINK Link specific SWIT Swi tch fabric SYST Overall system specific MODU LE ID - ILMI ADDR A TM address AGN Agent specific AGNK Agent kernel ...

  • Cabletron Systems 6A000/ZX-250 - page 143

    SmartCell 6A000/ZX-250 Referen ce Manual 2-119 Console Commands MODU LE ID - ILMI ILMN Main function s IMSC Miscellaneo us functions ITMR T imers MSGH Message handl ers POR T Port fun c tio ns REQ Request handlers SLOS Solaris specific Operating System UME UNI managem ent entity VXOS VxW orks specific Oper ating System WRAP W rapper functions MODU ...

  • Cabletron Systems 6A000/ZX-250 - page 144

    2-120 SmartCell 6A000/ZX-250 Reference Manual Console Com mands MODU LE ID - LEC CTL C ontrol spec ific DA T A Data specific DEF Default Message ERR Errors ILMC ILMI specific INIT Initialization IP A T IP over A TM Client LECS LECS specific LOG Log specific MIBC MIB Client specific RD Route Desc riptor SEND Send specific SIG Signaling s pecific SR ...

  • Cabletron Systems 6A000/ZX-250 - page 145

    SmartCell 6A000/ZX-250 Referen ce Manual 2-121 Console Commands MODULE ID - LECS CSIL ILMI functions CSIN Initialization fun c tio n CSSG Signa ling func tions CSTM T imer functio ns CSUT Utilities functi ons CSVL VLAN specific CTLC Contro l fun ctions DB Database functi ons GLOB Global functions MEMB Member fu nctions MNC Main functions PROF Profi ...

  • Cabletron Systems 6A000/ZX-250 - page 146

    2-122 SmartCell 6A000/ZX-250 Reference Manual Console Com mands MODU LE ID - LES MIBS MIB specific PROT Prototype specific SIGS Sign alin g specific SMN Main f unctions SMSC Miscellaneous VLAN VLAN specific functions MODUL E ID - S 10D DIAG Diagnostics ISR Interrupt Ser vice Routine SIF Interface SINT Initialization SOPN Opening channels SOS Operat ...

  • Cabletron Systems 6A000/ZX-250 - page 147

    SmartCell 6A000/ZX-250 Referen ce Manual 2-123 Console Commands MODUL E ID - S IG QS31 QSAAL3.1 specific Q293 Q.2931 sign alin g MODUL E ID - S YS FILE Flash file system related SAAL A TM Adaptati on Layer related SMP Packet Memory related MODUL E ID - VX SBUF Buf fers related SMEM Memory relat ed SSPC Heap related VXTM Timer related VXTR T as k Re ...

  • Cabletron Systems 6A000/ZX-250 - page 148

    2-124 SmartCell 6A000/ZX-250 Reference Manual Console Com mands MyNMAddr Use MyNMAddr (m y network m anagement add ress) to manage the s witch thr ough the sp ecified IP address. Opera tors modify, show Parame ters Description s SER VER SV C XX Paramet er Description V alue/Field Size Default [IP Addr] IP address of the switch. dot decimal/15 chara ...

  • Cabletron Systems 6A000/ZX-250 - page 149

    SmartCell 6A000/ZX-250 Referen ce Manual 2-125 Console Commands Exam ples switch_prompt # modify mynmaddr IpAddr() : 204.95.75.186 My Nm IP-Address : 204.95.75.186 switch_prompt # switch_prompt # show mynmaddr My Nm IP-Address : 204.95.75.186 switch_prompt # ...

  • Cabletron Systems 6A000/ZX-250 - page 150

    2-126 SmartCell 6A000/ZX-250 Reference Manual Console Com mands NetPrefix Use NetPrefi x to manip ulate netw ork A TM address prefixes on a particul ar port. Thi s 13-byt e net prefi x is based on a hierarchical addressing scheme. The default value starts with the first by te being set to 39 (DCC address f ormat), followed b y nine p airs o f 00s. ...

  • Cabletron Systems 6A000/ZX-250 - page 151

    SmartCell 6A000/ZX-250 Referen ce Manual 2-127 Console Commands Exam ples switch_prompt # modify netprefix PortNumber(ALL) : a1 NetPrefix(39:00:00:00:00:00:00:00:00:00:20:D4:14:15:00): 39:00:00:00:00:00:00:00:77:88:99:10:11:12:01 switch_prompt # switch_prompt # show netprefix PortNumber :( ALL ): a1 Port# NetPrefix ================================= ...

  • Cabletron Systems 6A000/ZX-250 - page 152

    2-128 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Passwd Use Passwd (password) to chan ge the password of the current or lower-privileged u ser . Opera tor passwd Parame ters Description Exam ple switch_prompt # passwd Old Password: admin Changing Password for User Administrator New Password: levelone Reenter Password: levelone Passwo ...

  • Cabletron Systems 6A000/ZX-250 - page 153

    SmartCell 6A000/ZX-250 Referen ce Manual 2-129 Console Commands Pin g Use Ping to test I P (internet p rotocol) co nnectivity of a clien t. However , the client must be on t he same su bnet or be reachable by routing from the subnet that is pinging . Opera tor start Parame ters Description Exam ple switch_prompt # start ping DestIP() : 204.95.77.25 ...

  • Cabletron Systems 6A000/ZX-250 - page 154

    2-130 SmartCell 6A000/ZX-250 Reference Manual Console Com mands PortAutoDetect Use PortAutoDetect to manage the automatic-detection features of the switch on an individual port basis. Opera tors modify, show Parame ters SER VER SV C XX Input Parameter Des cription V alue/Field Size Default [AutoDetectT ype] Si gnaling type auto-detect ion capabilit ...

  • Cabletron Systems 6A000/ZX-250 - page 155

    SmartCell 6A000/ZX-250 Referen ce Manual 2-131 Console Commands Description s Exam ples switch_prompt # modify portautodetect AutoDetectType(ALL) : sigtype PortNumber(ALL) : a1 Value(on) : off switch_prompt # switch_prompt # show portautodetect AutoDetectType(ALL) : PortNumber(ALL) : PortNumber AutoDetectSigType AutoDetectVpiVciBits =============== ...

  • Cabletron Systems 6A000/ZX-250 - page 156

    2-132 SmartCell 6A000/ZX-250 Reference Manual Console Com mands PortConfi g Use PortConf ig (p ort configu ration) to man age the con figuratio n of a port on the swit ch. Opera tors modify, show Parame ters SER VER SV C XX Input Parameter Des cription V alue/Field Size Default [PortNumber] Port number on the s witch. ALL, A1...A4, B1... B3, C1...C ...

  • Cabletron Systems 6A000/ZX-250 - page 157

    SmartCell 6A000/ZX-250 Referen ce Manual 2-133 Console Commands [Port QSAAL State] Signaling AAL (A TM adaptation layer). Indicates if the SSCOP (service specific connection oriented pro tocol) link is up or down. UP , DOWN UP [Port Operational State] State of the link, based on port status ( set by internal p rotocols). UP , DOWN DOW N [T ransmiss ...

  • Cabletron Systems 6A000/ZX-250 - page 158

    2-134 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Description s Exam ples switch_prompt # modify portconfig PortNumber(A1) : MaxVPIBits(0) : MaxVCIBits(12) : InterfaceAddressType(PRIVATE) : switch_prompt # [Current VCI Bits] Current VCI bits are d erived fr om the VPI/VCI set closest to the configured, as well as active, VPI/VCI sets. ...

  • Cabletron Systems 6A000/ZX-250 - page 159

    SmartCell 6A000/ZX-250 Referen ce Manual 2-135 Console Commands The foll owing ex amples sh ow the por t conf iguration of all ports , port A4, and then por t B4 (CPU port ): switch_prompt # show portconfig PortNumber(ALL) : Port ID Trans Media Speed Admin Op QSAAL Type Type (MB/s) State State State ================================================= ...

  • Cabletron Systems 6A000/ZX-250 - page 160

    2-136 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Current VPI Bits : 0 Current VCI Bits : 12 Current In Use VCCs : 24 Port B4(CPU) Configuration Current Max VCCs : 4096 switch_prompt # switch_prompt # show portconfig /d PortNumber(ALL) : Port A1 Configuration ============================================================================ ...

  • Cabletron Systems 6A000/ZX-250 - page 161

    SmartCell 6A000/ZX-250 Referen ce Manual 2-137 Console Commands PortMode Use PortMode to control the port framing proto col on the switch when communicating with other switches that use dif ferent st andards (such as the Eur opean SDH ty pe). Opera tors modify, show SER VER SV C XX ...

  • Cabletron Systems 6A000/ZX-250 - page 162

    2-138 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Parame ters Description s Input Parameter Des cription Field Size/V alue Default [PortNumber] Port number on the s witch. ALL, A1...A4, B1...B4, C 1...C4, D1...D4 ALL [PortMo de] Phys ical mode t ype of th e port. SONET , SDH SONET Outpu t Paramet er Description [Port ID] Same as [Port ...

  • Cabletron Systems 6A000/ZX-250 - page 163

    SmartCell 6A000/ZX-250 Referen ce Manual 2-139 Console Commands Exam ples switch_prompt # modify portmode PortNumber(ALL) : a1 PortMode(SONET) : sdh switch_prompt # switch_prompt # show portmode PortNumber(ALL) : Port ID Frame Type ============================================================================ A1 SDH A2 SONET A3 SONET A4 SONET B1 SONE ...

  • Cabletron Systems 6A000/ZX-250 - page 164

    2-140 SmartCell 6A000/ZX-250 Reference Manual Console Com mands PortStat Use PortStat (port statistics) to manag e traffic statistics for a given port or all ports. These statistics relate to network reso urces managemen t, congest ion, an d performance i ssues. Opera tors show, clear Parame ter SER VER SV C XX Input Parameter Des cription V alue/F ...

  • Cabletron Systems 6A000/ZX-250 - page 165

    SmartCell 6A000/ZX-250 Referen ce Manual 2-141 Console Commands Description s Exam ples switch_prompt # show portstat PortNumber(ALL) : Port ID OAM RM CLP1 Unk VC CLP1 Total Recvd Recvd Recvd Dropped Dropped Dropped ============================================================================ A1 0 0 0 0 0 0 A2 0 0 0 0 0 0 A3 0 0 0 0 0 0 A4 0 0 0 138 ...

  • Cabletron Systems 6A000/ZX-250 - page 166

    2-142 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Unknown VC Cells Dropped : 0 CLP1 Cells Dropped : 0 Total Cells Dropped : 0 Port A3 Statistics ============================================================================ OAM Cells Received : 0 RM Cells Received : 0 CLP1 Cells Received : 0 Unknown VC Cells Dropped : 0 CLP1 Cells Dropp ...

  • Cabletron Systems 6A000/ZX-250 - page 167

    SmartCell 6A000/ZX-250 Referen ce Manual 2-143 Console Commands PortT raf ficCon g estion Use PortT raf ficCongestion (p ort traffic c ongestion) to m anage traff ic congestion par ameter for the specified port. Opera tors modify, show Parame ter Description s SER VER SV C XX Paramet er Description V alue/Field Size Default [PortNumber] Port number ...

  • Cabletron Systems 6A000/ZX-250 - page 168

    2-144 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Exam ples switch_prompt # modify portrafficcongestion Port(ALL) : Queue1MinimumCellCounter(0) : 40 Queue2MinimumCellCounter(0) : 40 Queue3MinimumCellCounter(0) : 40 Queue4MinimumCellCounter(0) : 40 Queue1MaximumCellCounter(4096) : 2000 Queue2MaximumCellCounter(4096) : 2000 Queue3Maximu ...

  • Cabletron Systems 6A000/ZX-250 - page 169

    SmartCell 6A000/ZX-250 Referen ce Manual 2-145 Console Commands Privile g e Use Privilege to man a ge th e privilege level of the current u ser . Opera tors show, enable, disable Parame ter Description s SER VER SV C XX Input Parameter Description V alue/Field Size Default [Passwor d] Current pas sword for t hat pri vilege le vel. 5-8 characters n/ ...

  • Cabletron Systems 6A000/ZX-250 - page 170

    2-146 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Exam ples switch_prompt # show privilege The current user is Administrator switch_prompt # switch_prompt # enable password: ******** switch_prompt # disable The current user is ReadOnly switch_prompt # ...

  • Cabletron Systems 6A000/ZX-250 - page 171

    SmartCell 6A000/ZX-250 Referen ce Manual 2-147 Console Commands Prompt Use Prompt to control h ow the swit ch prompt i s display ed on the console moni tor . Opera tor modify Parame ter Description s Exam ple switch_prompt # set prompt Prompt(switch_prompt) : My_Switch My_Switch # SER VER SV C XX Input Parameter Description V alue/Field Size Defaul ...

  • Cabletron Systems 6A000/ZX-250 - page 172

    2-148 SmartCell 6A000/ZX-250 Reference Manual Console Com mands PVC Use PVC (p ermanent vi rtual ci rcuit) to manage PVCs on sp ecific por ts configu red on the switch. Opera tors add, delete, activate, deactivate , show Parame ters SER VER SV C XX Input Parameter Description V alue/Field Size Default [ConnT ype] Connectio n ty pe for PMP ( poi nt ...

  • Cabletron Systems 6A000/ZX-250 - page 173

    SmartCell 6A000/ZX-250 Referen ce Manual 2-149 Console Commands In the Output P arameter table below , (</d>) appears next to the parameter that is avail able only throug h the show pvc /d (detailed) comman d. When (</s>) appears next to a parameter , the parameter appear s in both the summar ized table and the detailed table. [BkwT raf ...

  • Cabletron Systems 6A000/ZX-250 - page 174

    2-150 SmartCell 6A000/ZX-250 Reference Manual Console Com mands [Low to High Operational Status] (< /d >) Status of the forward connection . Status is from th e low-to-high VC L (virtual channel link)—th e connection between ho st and s witch. UP , DOWN [High to Low Operational Status] (< /d >) Status of the backwar d connection. Stat ...

  • Cabletron Systems 6A000/ZX-250 - page 175

    SmartCell 6A000/ZX-250 Referen ce Manual 2-151 Console Commands [Number of EPD Packets dropp ed in th e Fwd Direction] (< /d >) Number of EPD (early packet discard) packets dro pped in the forward dir ection of this cross-connect. Updated every 40 s econds. 1, 2, 3, 4. ../ n/a [Bkw T rafficT ype] ( < /d >) T raffic ty pe of this backwar ...

  • Cabletron Systems 6A000/ZX-250 - page 176

    2-152 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Description s Operat or Paramet ers/Permis sions Description add pvc [ConnType] < connectiontype > [LowPort] < lowport > [LowVPI] < lowvpi > [LowVCI] < lowvci > [HighPort] < highport > [HighVPI] < highvpi > [HighVCI] < highvci > [FwdTrafficDesc ...

  • Cabletron Systems 6A000/ZX-250 - page 177

    SmartCell 6A000/ZX-250 Referen ce Manual 2-153 Console Commands Y ou can create either a P TP (poi nt-to-point ) or PMP (p oint-to- multipoin t) PVC when you defin e the ports and low identifiers [vci] and [vpi ]. T o send traffic fr om one port to multiple p orts, enter the same low port and low identifiers fo r all the PVCs at a single port. Then ...

  • Cabletron Systems 6A000/ZX-250 - page 178

    2-154 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Standard Repo rt switch_prompt # show pvc d2 CrossConnId :( ALL ): Conn Conn Traffic Conn Low High Admin Id SubId Type Type Port Vpi/Vci Port Vpi/Vci Status =========================================================================== 00024 00049 CBR PTP D2 000/00033 D3 000/00034 UP swit ...

  • Cabletron Systems 6A000/ZX-250 - page 179

    SmartCell 6A000/ZX-250 Referen ce Manual 2-155 Console Commands Detailed Report for One Port ( [/d b2] ) switch_prompt # show pvc /d b2 CrossConnectId(ALL) : Show Cross Connection in Detailed Mode ============================================================================== Cross Connect Id : 4099 Connection Type : PTP Low Port : B4(CPU) Low VPI : ...

  • Cabletron Systems 6A000/ZX-250 - page 180

    2-156 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Backward Traffic Type : NRTVBR Backward Bandwidth Allocated in Kb/s : 411 Backward Priority Queue : MEDIUM-LOW Bkwd Early Packet Discard(For Lower Threshold of Congestion) : Disabled Bkwd Early Packet Discard(For Higher Threshold of Congestion): Enabled Backward RM Cell Priority : Disa ...

  • Cabletron Systems 6A000/ZX-250 - page 181

    SmartCell 6A000/ZX-250 Referen ce Manual 2-157 Console Commands PVCByID Use PVCBy ID (permane nt virtu al circuit by identi fication number) t o manage cr oss-conn ect based P VCs on a cross-co nn ect ID or sub ID. Opera tors activate, deactivate, delete Parame ters Description s SER VER SV C XX Input Parameter Description V alue/Field Size Default ...

  • Cabletron Systems 6A000/ZX-250 - page 182

    2-158 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Exam ples switch_prompt # activate pvcbyid CrossConnId(0) : 4097 CrossConnSubId(0) : 2061 switch_prompt # switch_prompt # delete pvcbyid CrossConnId:(0) : 24 CrossConnSubId:(0) : 49 Confirm? (y/n) : y switch_prompt # delete pvcbyid [CrossConnId] < crossconnid > [CrossConnSubId] & ...

  • Cabletron Systems 6A000/ZX-250 - page 183

    SmartCell 6A000/ZX-250 Referen ce Manual 2-159 Console Commands Reboot Use Reboot to reboo t the switch. Enter Reboot with caution as it is instantly entered with ou t offering the chance to confirm your deci sion. Opera tor reboot Parame ters This comman d has no par ameters . J ust ty pe r eboot at the s witch prompt an d the swi t ch reb oot s . ...

  • Cabletron Systems 6A000/ZX-250 - page 184

    2-160 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Exam ple switch_prompt # reboot Luxor Start-up Code Version 1.0.0, Nov 13 1996 Copyright 1995, ZeitNet Inc. CPU Board Details: Board Revision: 1 CPU Speed: 25 MHZ. Common DRAM Base Address: e0000000, Size: 8 MB. No CPU DRAM. Secondary Flash Base Address: 90000000, Size: 4 MB. Switch Bo ...

  • Cabletron Systems 6A000/ZX-250 - page 185

    SmartCell 6A000/ZX-250 Referen ce Manual 2-161 Console Commands Route Use Route t o administ er IP (int ernet protoco l) route man agement to an A TM client through an Ethernet network. It allows network managemen t software to communicate acro ss a network of switches. Opera tors add, delete, show Parame ters SER VER SV C XX Input Parameter Des cr ...

  • Cabletron Systems 6A000/ZX-250 - page 186

    2-162 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Description s Exam ples switch_prompt # add route DestNetIP() : 204.95.77.187 GatewayIP() : 204.95.77.186 switch_prompt # switch_prompt # show route ROUTE NET TABLE destination gateway flags Refcnt Use Interface ------------------------------------------------------------------------ 9 ...

  • Cabletron Systems 6A000/ZX-250 - page 187

    SmartCell 6A000/ZX-250 Referen ce Manual 2-163 Console Commands Rows Use Rows to alter the number of rows per pag e on the consol e display . Opera tor modify Parame ter Description Exam ple switch_prompt # modify rows Rows(18): 25 There are now 25 rows per page switch_prompt # SER VER SV C XX Input Parameter Description V alue/Field Size Default [ ...

  • Cabletron Systems 6A000/ZX-250 - page 188

    2-164 SmartCell 6A000/ZX-250 Reference Manual Console Com mands SARStat Use SARStat (s egmentation and reassembly statistics) to view statistics from the SAR on the CPU port. This is useful for de bugging har d ware problems. Opera tor show Parame ters This command has no inpu t p arameters. Just typ e sh ow sarstat at the switch pro mpt. SER VER S ...

  • Cabletron Systems 6A000/ZX-250 - page 189

    SmartCell 6A000/ZX-250 Referen ce Manual 2-165 Console Commands Description [ISR Int] T otal interrupts received. [RQU Int] R eceive qu eue underrun indicator since last u p-time or clear . [RQA Int] Receive queue alert indicator since last up -time or clear . [MM Int] Mailbox modified indicator . [MF Int] Mailbox full indicato r . [SBE Int] System ...

  • Cabletron Systems 6A000/ZX-250 - page 190

    2-166 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Exam ple switch_prompt # show sarstat Receive Statistics Rcv Pkts: 6 Rcv Byts: 648 Raw Cell: 0 Buf UF : 0 FIFO OR : 0 Max Len : 0 Len Err : 0 Crc Err : 7 U Abrts : 0 T1 Err : 0 Chnl DVT: 26 spur Int: 0 Ttal Err: 7 ISR Int: 39 RQU Int: 0 RQA Int: 0 MM Int: 39 MF Int: 0 SBE Int: 0 SPE In ...

  • Cabletron Systems 6A000/ZX-250 - page 191

    SmartCell 6A000/ZX-250 Referen ce Manual 2-167 Console Commands Shutdown Use Shutdown to shut down the switch to a state where it can be powered of f. It stops all log ging and synchronizes the file system. This must be run befo re turning off the switch. Opera tor shutdown Parame ters This command has n o parameters. Jus t type shutdown at the swi ...

  • Cabletron Systems 6A000/ZX-250 - page 192

    2-168 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Si g Confi g Use SigCo nfig (s ignaling configur ation) t o manage si gnaling config uration of all or specif ic por ts. Opera tors modify, show Parame ters SER VER SV C XX Input Parameter Des cription V alue/Field Size Default [PortNumber] Port number on the s witch. A1...A4, B1...B3, ...

  • Cabletron Systems 6A000/ZX-250 - page 193

    SmartCell 6A000/ZX-250 Referen ce Manual 2-169 Console Commands Description s Exam ples switch_prompt # modify sigconfig PortNumber(A1) : A2 CurrentInterfaceType(UNI3.0) : UNI3.1 CurrentInterfaceRole(NETWORK) : USER DefaultInterfaceType(UNI3.0) : UNI3.1 DefaultInterfaceRole(NETWORK) : USER switch_prompt # Operat or Paramet ers/Permis sions Descript ...

  • Cabletron Systems 6A000/ZX-250 - page 194

    2-170 SmartCell 6A000/ZX-250 Reference Manual Console Com mands The followin g examples are for a specific port - A2, and then for all p orts: switch_prompt # show sigconfig a2 PortNumber : A2 Current Signaling Type : UNI3.1 Current Signaling Role : NETWORK Default Signaling Type : UNI3.1 Default Signaling Role : NETWORK Signaling Timers : TimerId ...

  • Cabletron Systems 6A000/ZX-250 - page 195

    SmartCell 6A000/ZX-250 Referen ce Manual 2-171 Console Commands Si g Fla g s Use SigFlags (signaling flags) t o view the status of flags related to s ignaling. This command is unmodifiable, and the switch defaults to a UNI3.1 to UN I3.0 transl ation. Opera tor show Parame ter Description Exam ple switch_prompt # show sigflags Translation31To30 is e ...

  • Cabletron Systems 6A000/ZX-250 - page 196

    2-172 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Si g Stat Use SigStat (signa lin g statistics) to see current sig nal ing statistics of all ports or a specific port. Opera tor show Parame ters SER VER SV C XX Input Parameter Description V al ue/Field Size Default [PortNumber] Port n umber on the switch. A1... A4, B1...B3, C1...C4, D ...

  • Cabletron Systems 6A000/ZX-250 - page 197

    SmartCell 6A000/ZX-250 Referen ce Manual 2-173 Console Commands Description [Emit Signal ing Message Errors] N umber of signal ing message er rors for thi s switch (su ch as invali d informatio n elements (IE) or missing mand atory elements in the IEs). [Detect T imer Expira tions] Number of calls terminated by o ther switches due to timer expirati ...

  • Cabletron Systems 6A000/ZX-250 - page 198

    2-174 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Exam ple switch_prompt # show sigstat PortNumber(ALL) : a2 Signaling per Port Statistics =========================================================================== Port# : A2 Detect Unavailable Routes : 0 Emitt Unavailable Routes : 0 Detect Unavailable Resources : 0 Emitt Unavailable ...

  • Cabletron Systems 6A000/ZX-250 - page 199

    SmartCell 6A000/ZX-250 Referen ce Manual 2-175 Console Commands SSCOPConfi g Use SSCOPC onfig (serv ice-specific con nection- oriented pr otocol conf iguration ) to view t imers and other parameter values. Opera tor show Parame ters SER VER SV C XX Paramete r Description V alue/Field Size Default [Port#] Port number on the switch. ALL, A1...A4, B1. ...

  • Cabletron Systems 6A000/ZX-250 - page 200

    2-176 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Description Exam ples switch_prompt # show sscopconfig PortNumber(ALL) : A1 Port# MaxPD MaxCC PollTm KpAliveTm NoRespTm CCTm TxWindowSz RxWindowSz =========================================================================== A1 15 5 250 1500 15000 1500 256 256 switch_prompt # show sscopc ...

  • Cabletron Systems 6A000/ZX-250 - page 201

    SmartCell 6A000/ZX-250 Referen ce Manual 2-177 Console Commands SVC Use SVC (switched virtual circuit) to see the SVCs cre ated on the switch. Opera tor show Parame ters In the Output Paramete r table below , (< /d >) appears next to parameters that are available only through the show sv c /d (detailed) comman d. When (< /s >) ( summari ...

  • Cabletron Systems 6A000/ZX-250 - page 202

    2-178 SmartCell 6A000/ZX-250 Reference Manual Console Com mands [ConnT ype] (< /s >) Either PMP to P TP connection type. PMP , P TP [LowPort] (< /s >) [LowVPI] (< /s >) [LowVCI] (< /s >) [HighP ort] (< /s >) [HighVPI] (< /s >) [HighVCI] (< /s >) These parameters are available in the show svc /s option, as w ...

  • Cabletron Systems 6A000/ZX-250 - page 203

    SmartCell 6A000/ZX-250 Referen ce Manual 2-179 Console Commands [FwdRMCellP riority] (< /d >) Forward RM (res ource management) cell priority for this cross-connect, as calculated by CAC. Enabled, Disabled Fwd Cell Loss Prio rity (CLP)] (< /d >) Forward bandwidth allocated to th is cross-connect, as calculated by CAC. Enabled, Disabl ed ...

  • Cabletron Systems 6A000/ZX-250 - page 204

    2-180 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Description s Exam ples The following ex amples show a summarized and detailed listing of a n SVC. Summarized Repor t ( </s> ) switch_prompt # show svc /s PortNumber(ALL) : CrossConnectId(ALL) : Conn Conn Traffic Conn Low High Admin Id SubId Type Type Port VPI/VCI Port VPI/VCI St ...

  • Cabletron Systems 6A000/ZX-250 - page 205

    SmartCell 6A000/ZX-250 Referen ce Manual 2-181 Console Commands Detailed Report ( </d> ) switch_prompt # show svc /d PortNumber(ALL) : CrossConnectId(ALL) : Show cross-connection in Detailed Mode ============================================================================ cross-connect Id : 4654 Connection Type : PTP Low Port : B4(CPU) Low VP ...

  • Cabletron Systems 6A000/ZX-250 - page 206

    2-182 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Switch Use Switch to backup and restore switch configuration files. Opera tors backup, restore Parame ters SER VER SV C XX Input Parameter Description V al ue/Field Size Default [ServerIP] IP address of the backup server . dot decimal/ 7-15 characters NONE [Path] Pathname o f the backu ...

  • Cabletron Systems 6A000/ZX-250 - page 207

    SmartCell 6A000/ZX-250 Referen ce Manual 2-183 Console Commands Description s Exam ples switch_prompt # backup switch ServerIP(1.1.1.200) : 1.1.1.200 Path(public/smartcell.ztr) : /back_dir/cnfg_wk04 switch_prompt # switch_prompt # restore switch ServerIP() : 1.1.1.200 Path(/back_dir/cnfg_wk04) : Backup file is valid. Restoring a backup file will co ...

  • Cabletron Systems 6A000/ZX-250 - page 208

    2-184 SmartCell 6A000/ZX-250 Reference Manual Console Com mands SwitchConfi g Use SwitchCo nfig (switch configu r atio n) to manage switch - related parameters, lik e switchname and IP address. Opera tors modify, show Parame ters SER VER SV C XX Input Parameter Description V alue/Field Size Default [SwitchName] Name of the switch. 1-19 characters s ...

  • Cabletron Systems 6A000/ZX-250 - page 209

    SmartCell 6A000/ZX-250 Referen ce Manual 2-185 Console Commands [Common DR AM] Co mmon DRAM memory size. megabyt es/Up to 4 characters [SAR Control SRAM] SAR control memory size. kilobytes/Up to 5 characters Power Mode T ype of power modul es used by the switch Redundant, No n-Redundant [Number of S witch Boards ] Number of sw itch board s on the s ...

  • Cabletron Systems 6A000/ZX-250 - page 210

    2-186 SmartCell 6A000/ZX-250 Reference Manual Console Com mands [Build Dat e] The date which th e code was loaded on the switch. day/mo n th/date/ hr :m in:sec year [Software Image Size] Binary imag e size. bytes [Heap Space Used/T otal/%Free] T otal heap space used, total memo ry allocated to heap, and percent of free memory . bytes/ bytes/ % Outp ...

  • Cabletron Systems 6A000/ZX-250 - page 211

    SmartCell 6A000/ZX-250 Referen ce Manual 2-187 Console Commands Description s Exam ples switch_prompt # modify switchconfig SwitchName(switch_1) : switch_2 IPAddress(200.30.72.122) : 1.1.1.202 IPNetMask(255.255.255.0) : 255.255.255.128 switch_prompt # switch_prompt # show switchconfig Switch Configuration =========================================== ...

  • Cabletron Systems 6A000/ZX-250 - page 212

    2-188 SmartCell 6A000/ZX-250 Reference Manual Console Com mands SwitchName Use SwitchName to change the nam e of the switch. Opera tor modify Parame ter Description Exam ple switch_prompt # modify switchname SwitchName(switch_1): switch_2 Confirm(y/n)?: y switch_prompt # SER VER SV C XX Input Parameter Description V al ue/Field Size Default [Switch ...

  • Cabletron Systems 6A000/ZX-250 - page 213

    SmartCell 6A000/ZX-250 Referen ce Manual 2-189 Console Commands SwitchT raf ficCon g estion Use SwitchT raf ficCongestion to manage glo bal switch traffic con gestion thresholds on the switch. Opera tors modify, show Parame ters SER VER SV C XX Paramete r Description V alue/Field Size Default [Queue # EFCI Thres hold] Threshold used to trigg er EFC ...

  • Cabletron Systems 6A000/ZX-250 - page 214

    2-190 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Description s Exam ples switch_prompt # modify switchtrafficcongestion Queue1EFCIThreshold(16383) : 2000 Queue2EFCIThreshold(16383) : 2000 Queue3EFCIThreshold(16383) : 2000 Queue4EFCIThreshold(16383) : 2000 LowEPDWatermark(7552) : 4000 HighEPDWatermark(7552) : 8000 RMCellMarkingEnable( ...

  • Cabletron Systems 6A000/ZX-250 - page 215

    SmartCell 6A000/ZX-250 Referen ce Manual 2-191 Console Commands T raf ficDescriptor Use T rafficDescriptor to manage the templates that describe traf fic characteristi cs of a VC (virtual circuit) that are u sed in the creation of PVCs (permanent virtual circuits. A traffic descriptor is a list of parameters that speci fy th e characteristics of a ...

  • Cabletron Systems 6A000/ZX-250 - page 216

    2-192 SmartCell 6A000/ZX-250 Reference Manual Console Com mands [SCRCLP0] Specifies maximu m average rate at which cells can be sent over a VC. SCR of cells with their CLP bit equa ls zero. Kb/s/ 0-622 000 0 [MBSCLP01] MBS (maximum burst size) of cells with their CLP set to one. Specifies the maximum number of cells that can be transmitted at th e ...

  • Cabletron Systems 6A000/ZX-250 - page 217

    SmartCell 6A000/ZX-250 Referen ce Manual 2-193 Console Commands Description s Exam ples The following example creates a traf fic descriptor of type 4. After the traf fic descriptor is created, it is listed in a table and associated with an index number . Although the index numbers are defin ed sequentially , they are only a counter of how many traf ...

  • Cabletron Systems 6A000/ZX-250 - page 218

    2-194 SmartCell 6A000/ZX-250 Reference Manual Console Com mands switch_prompt # add trafficdescriptor TrafficType(UBR) : cbr TrafficDescriptorType(8) : 4 PCRCLP01(0) : 180 PCRCLP0(0) : 155 SCRCLP01(0) : SCRCLP0(0) : MBSCLP01(0) : MBSCLP0(0) : QOSClass(1) : AALType(5) : 1 switch_prompt # switch_prompt # delete trafficdescriptor TrafficDescriptorInde ...

  • Cabletron Systems 6A000/ZX-250 - page 219

    SmartCell 6A000/ZX-250 Referen ce Manual 2-195 Console Commands 4 -W ith CLP and T a gging, but no SCR. CBR, NR TVBR, RT V B R pcrclp 0, pcrclp 01 1 Evaluat es cells set with CLP=1 and cells set w ith CLP=0 separately . Because tag option is set, non-compl iant CLP=0 cells are tagg e d and non-compl iant CLP=1 cells are dropped. 1, 2, 3, 4, 5, 16 5 ...

  • Cabletron Systems 6A000/ZX-250 - page 220

    2-196 SmartCell 6A000/ZX-250 Reference Manual Console Com mands ...

  • Cabletron Systems 6A000/ZX-250 - page 221

    SmartCell 6A000/ZX-250 Referen ce Manual 2-197 Console Commands T rapCommuni ty Use T rapCommuni ty to manage th e list of hosts that the switch sends trap notificatio ns to concerning si gnificant events. Each trap co mmunity has a n ame, IP address, and po rt number . The trap commu nity name and add ress combination m ust be unique. Opera tors a ...

  • Cabletron Systems 6A000/ZX-250 - page 222

    2-198 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Description s Exam ples switch_prompt # add trapcommunity Name() : boris IpAddr() : 204.95.77.148 Port (162) : 100 switch_prompt # switch_prompt # show trapcommunity TrapCommunity Name IP Address Port =========================================================================== trapcomm ...

  • Cabletron Systems 6A000/ZX-250 - page 223

    SmartCell 6A000/ZX-250 Referen ce Manual 2-199 Console Commands T rustedNMS Use T rus tedNMS (tr usted network man agement syst em) to config ure a “trust ed network management system” on the switch. The trusted NMS is identified by its IP address. Only the trusted n etwork management s ys tem is allowed to perform cr itical operations such as: ...

  • Cabletron Systems 6A000/ZX-250 - page 224

    2-200 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Parame ters Description s Exam ples switch_prompt # modify trustednms IpAddr() : 90.1.1.1 Trusted NMS IP-Address : 90.1.1.1 switch_prompt # switch_prompt # show trustednms Trusted NMS IP-Address : 90.1.1. switch_prompt # Input Parameter Description V alue/Field Size Default [IP Addr] I ...

  • Cabletron Systems 6A000/ZX-250 - page 225

    SmartCell 6A000/ZX-250 Referen ce Manual 2-201 Console Commands UNIRoute Use UNIRoute (user-network interface ro ute) to manage UNI routes and UNI routing tables. The routes are static using this command, com pared to the dyn amic UNI routes created th rough ILMI reg istration. Opera tors add, delete, show, flush Parame ters Description s SER VER S ...

  • Cabletron Systems 6A000/ZX-250 - page 226

    2-202 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Exam ples switch_prompt # add uniroute PortNumber(A1) : a3 UNIATMAddress(): 39:00:00:00:00:00:00:11:22:33:44:55:66:11:22:33:44:55:66:01 switch_prompt # add uniroute PortNumber(A1) : a3 UNIATMAddress(): 39:00:00:00:00:00:00:00:20:d4:14:15:00:11:22:33:04:05:06:02 switch_prompt # add unir ...

  • Cabletron Systems 6A000/ZX-250 - page 227

    SmartCell 6A000/ZX-250 Referen ce Manual 2-203 Console Commands The followin g example shows the uniro ute listing, before and after all ports are flu shed: switch_prompt # show uniroute PortNumber(ALL): Port# RouteType Atm Address =========================================================================== A1 STATIC 39:00:00:00:00:00:00:00:20:d4:14 ...

  • Cabletron Systems 6A000/ZX-250 - page 228

    2-204 SmartCell 6A000/ZX-250 Reference Manual Console Com mands VCCMask Use VCCMask (virt ual chann el connection mask) to mana ge th e combination of VP I (virtual path identifier) bit and VCI (virtual chan nel identifier) bit settings. There are only four different VCC mask entries allowed by the sw itch and the VPI and VCI shift must total 12 . ...

  • Cabletron Systems 6A000/ZX-250 - page 229

    SmartCell 6A000/ZX-250 Referen ce Manual 2-205 Console Commands Exam ples switch_prompt # modify vccmask MaskIndex(0) : 0 VPIShift(0) : 3 VCIShift(12) : 9 switch_prompt # switch_prompt # show vccmask MaskIndex VpiShift VciShift (In bits) (In bits) =========================================================================== 0 0 12 1 2 10 2 4 8 3 6 6 ...

  • Cabletron Systems 6A000/ZX-250 - page 230

    2-206 SmartCell 6A000/ZX-250 Reference Manual Console Com mands W e llKnownAddre ss Use W ellKnownAddress to manage the m apping between the A TM forum defined wel l-kno wn address fo r t he LEC S (LAN emulation conf iguration server ) and a registered address for another LECS. Opera tors add, delete, show, flush Parame ters SER VER SV C XX Input P ...

  • Cabletron Systems 6A000/ZX-250 - page 231

    SmartCell 6A000/ZX-250 Referen ce Manual 2-207 Console Commands Description s Operat or Parameters/P ermissions Descr iption add wellknownaddress [WellKnownAddress] < clientatmaddress > [RegisteredAddress] < serveratmaddress > Administrator Maps well-known address to the r egistered address of the server . This only can be don e one add ...

  • Cabletron Systems 6A000/ZX-250 - page 232

    2-208 SmartCell 6A000/ZX-250 Reference Manual Console Com mands Exam ples switch_prompt # add wellknownaddress WellKnownAddress(47:00:79:00:00:00:00:00:00:00:00:00:00:00:a0:3e:00:00:01:00): RegisteredAddress(39:00:00:00:00:00:00:00:20:D4:14:22:80:00:20:D4:14:22:80:01): 10.20.30.40.50 switch_prompt # switch_prompt # show wellknownaddress WellKnown V ...

  • Cabletron Systems 6A000/ZX-250 - page 233

    SmartCell 6A000/ZX-250 Reference M anual 3-1 Boot Load Commands 3 BOOT LOAD COMMANDS This chapter describes the low-level boot load commands. Boot load commands are used for setti n g switch start-up behavior and for performin g software downloads. Use the boot load commands to: • Set which copy of the boot load so ftware is th e default copy • ...

  • Cabletron Systems 6A000/ZX-250 - page 234

    3-2 SmartCell 6A000/ZX-250 Reference Manual Boot Load Com mands Accessin g the Boot Load Comma nds Boot load commands are execute d from the boot load pro mpt. The boot load prom pt is no t part of the s witch consol e, and is accessible only after a reboot an d before the switch software is loaded. Perform the following steps to gain access to the ...

  • Cabletron Systems 6A000/ZX-250 - page 235

    SmartCell 6A000/ZX-250 Reference M anual 3-3 Boot Load Commands chpi Use chpi to set one of the two boot load so ftware images as the default. Unl e ss o therwise specified withi n the initial reboot coun tdown, the default b oot load software image is the image that is loaded into DRAM and executed. Exam ple Set the boot load so ft ware imag e in ...

  • Cabletron Systems 6A000/ZX-250 - page 236

    3-4 SmartCell 6A000/ZX-250 Reference Manual Boot Load Com mands clfs Use clfs to clear the switch flash file system. The clfs command clears all VLAN and ELAN con figurations, route defini tions, p ort sett ings, and P VC configu rations. clfs also clears all IP addr esses, including the IP address for th e switch Ethernet interface. Exam ple => ...

  • Cabletron Systems 6A000/ZX-250 - page 237

    SmartCell 6A000/ZX-250 Reference M anual 3-5 Boot Load Commands dcf g Use dcfg to display information ab ou t the current boot PROM configuratio n • Revision numbers of both boot load software images • Display the switch MAC address • Number (in h exadecimal) of contigu ous MAC addresses after the base MAC address • Show whether POST is on ...

  • Cabletron Systems 6A000/ZX-250 - page 238

    3-6 SmartCell 6A000/ZX-250 Reference Manual Boot Load Com mands df Use df (do wnload firmware) to do wnload software images from a TF TP/Bootp server to the flash RAM of the switch. The df comm and uses three parameters: b , s , and p . These parameters specify which software componen t to download. Exam ples => df s You've requested a Swit ...

  • Cabletron Systems 6A000/ZX-250 - page 239

    SmartCell 6A000/ZX-250 Reference M anual 3-7 Boot Load Commands g o Use the go command to exit the boo t load prompt and run switch software (with or without POST). Exam ple => go s Verifying Checksum of Secondary Flash... Host Name: Attaching network interface ei0... done. Attaching network interface lo0... done. 0xe05764e0 (tRootTask): flashFs ...

  • Cabletron Systems 6A000/ZX-250 - page 240

    3-8 SmartCell 6A000/ZX-250 Reference Manual Boot Load Com mands he Use he to get help o n boot load comm a nd s or show list of all b oo t lo ad commands. The ques tion mark ( ? ) can be entered in place of he . Exam ple => he chpi chpi [option] option: 0 ..changes the Boot Load default to be Boot Load Software0; 1 ..changes the Boot Load defaul ...

  • Cabletron Systems 6A000/ZX-250 - page 241

    SmartCell 6A000/ZX-250 Reference M anual 3-9 Boot Load Commands ponf Use ponf to set whether POST diagno st ics are run by default when th e switch is st arted. Exam ple => ponf p Modifying Control/Stat field to execute POST, please wait... New postOnOff value programmed successfully into Control/Stat field. => ponf does no t af fect the beha ...

  • Cabletron Systems 6A000/ZX-250 - page 242

    3-10 SmartCell 6A000/ZX-250 Reference Manual Boot Load Com mands ...

  • Cabletron Systems 6A000/ZX-250 - page 243

    SmartCell 6A000/ZX-250 Reference M anual A-1 APPENDIX A ACRONYMS A B AAL A TM Ada ptati on La ye r AAL1 A TM Ada ptati on La ye r T y pe 1 AAL2 A TM Ada pter L a yer T ype 2 AAL3/4 A TM A d apte r L ayer T ype 3 /4 AAL5 A TM Ada pter L a yer T ype 5 AALM A TM Ada ptati on La ye r Mux ABR A vailable Bit Rat e AFI Authorit y and For mat Ide ntifier A ...

  • Cabletron Systems 6A000/ZX-250 - page 244

    A-2 SmartCell 6A000/ZX-250 Reference Manual Acronym s C BUS Broadcast and Unkno wn Server CAC Call Admiss ion Control CAN Campus Area Net work CA T-3 Category 3 unshielde d twis ted pair cable CA T-5 Category 5 unshielde d twis ted pair cable CBR Constant Bit Rate CCITT Comite Consul tatif Internat ionale de T elegra phique et T elephonique (Consul ...

  • Cabletron Systems 6A000/ZX-250 - page 245

    SmartCell 6A000/ZX-250 Reference M anual A-3 Acronyms D E DCC Digital Cross Co nnect, gen eric DACS or Direct Connect Car d, data interfac e module DF Download Fla sh DS-0 Digi tal Si gnali ng 0 DS-1 Digi tal Si gnali ng 1 DS-3 Digi tal Si gnali ng 3 DTE Data T erm ina l E quip ment DVT Delay V ariat ion T oleran ce E-1 Europ ean st an dard for di ...

  • Cabletron Systems 6A000/ZX-250 - page 246

    A-4 SmartCell 6A000/ZX-250 Reference Manual Acronym s F G H I FCS Frame Check Se quence FIFO First I n First Out FT P File T ransfer Protoc ol GB/S Gigabits per secon d GCRA Generic Ce ll Rate Al gorithm GFC Generic Fl ow Control HEC Header Err or Check IEEE Inst itute of Elect rical an d Electro nic Enginee rs ICMP Inte rnet Contr ol Me ssage Prot ...

  • Cabletron Systems 6A000/ZX-250 - page 247

    SmartCell 6A000/ZX-250 Reference M anual A-5 Acronyms J K L I/O Input/Out put IOM Input/Out put Module IP Interne t Protocol IP/A TM Internet Pr otocol ov er A TM IPX Inte rnetwork Pa cket Exc hange prot ocol ITU-TSS Interna tional T elecommunica tions Unio n-T e lecommunicati ons Standa rds Sector ISDN Inte grated Ser vice Digi tal Networ k JPEG J ...

  • Cabletron Systems 6A000/ZX-250 - page 248

    A-6 SmartCell 6A000/ZX-250 Reference Manual Acronym s M N LECSELA N LAN Emulation Configur ation Ser ver Emulat ed LAN LES LANE Server LESELAN LANE Server Emul ated LAN LIS Logical I P Subnet work LLC Logical Li nk Contr ol LMI Local Ma nagement Int erface MAC Media Acc ess Contro l MAN Metropoli tan Area Net work MB/S Megabits p er second MBS Maxi ...

  • Cabletron Systems 6A000/ZX-250 - page 249

    SmartCell 6A000/ZX-250 Reference M anual A-7 Acronyms O P NETBEUI NetBI OS Ext ensio n User Interf ace NFS Netw o rk Fi le Sys tem NIC Netwo rk In terfac e Cont roller /Car d NLS Natural L anguage Syntax NMS Network Management Sys tem NNI Netw o rk No de In terfac e or N etwo rk -to-N etw ork In terfa ce NRT-VBR Non Real T ime - V ariabl e Bit Rate ...

  • Cabletron Systems 6A000/ZX-250 - page 250

    A-8 SmartCell 6A000/ZX-250 Reference Manual Acronym s Q R PDU Protocol Data Unit PMD Physic al Media Depe ndent S ub-layer PMP Point -to-Multi point P-NNI Private Network Node I nterfac e or Priva te Netwo rk-to-Net work Inter face PPD Partia l Pack et Di scard PROM Programmabl e Read-Only Memory PTI Payload T ype Indica tor PTP Poin t-to- Poin t P ...

  • Cabletron Systems 6A000/ZX-250 - page 251

    SmartCell 6A000/ZX-250 Reference M anual A-9 Acronyms S RT-VBR Real T ime - V ariable Bit Rate RW Read-W rite Access SAAL Signalin g A TM Adaptation Layer SAR Segment ation An d Reasse mbly SAR-PDU SAR Protocol Data Unit SBE Syst em Bus Erro r SCR Sust ainab le Ce ll Rat e SDH Synchronous Digital Hierarchy SEAL Si mple Ef ficient Adap tation La yer ...

  • Cabletron Systems 6A000/ZX-250 - page 252

    A-10 SmartCell 6A000/ZX-250 Reference Manual Acronym s T U V T-1 T ran sm issi on Sy st em 1 T-3 T ran sm issi on Sy st em 3 TA X I T ranspar ent Asynchr onous T ransmit ter/Rece iver Int erface TCP T ransmission Cont rol Prot ocol TD T raffic Descri ptor TDM T ime-Div ision Mu ltipl ex ing TF TP T riv ial File T r ansfer Proto col TL V T ype, Leng ...

  • Cabletron Systems 6A000/ZX-250 - page 253

    SmartCell 6A000/ZX-2 50 Reference Manual A-11 Acronyms W VCC V irtual Channel Connecti on VCI V irtu al Chan nel Id e ntifie r VCL V irtual Channel Link VLAN V irtual LAN VP V irtual Path VPC V irtual Path Co nnec ti on VPI V irtual Path Ide ntifi er VPN V irtual Pr ivate Network VT V irtual T ributary WA N W ide Area Network ...

  • Cabletron Systems 6A000/ZX-250 - page 254

    A-12 SmartCell 6A000/ZX-250 Reference Manual Acronym s ...

  • Cabletron Systems 6A000/ZX-250 - page 255

    SmartCell 6A000/ZX-250 Reference M anual B-1 APPENDIX B CAUSE CODES A TM events often generate messages that appear on the console. Most messages are self-explanatory . However , some messages contain additional information in the form of cause codes. These code s identify the cause of the ev ent. For example, the f ollowing SmartCell ZX-250 error ...

  • Cabletron Systems 6A000/ZX-250 - page 256

    B-2 SmartCell 6A000/ZX-250 Reference Manual Cause Code s 38 Network out of o rder 41 T e mpor a ry failu re 43 Access information discarded 45 No VPI/VCI available 47 Resource unavailable, unspecified 49 Qu ality of Service unavailabl e 51 Us er cell rate unavailable 57 Bearer capability not authorized 58 Bearer capability not presently available 6 ...

  • Cabletron Systems 6A000/ZX-250 - page 257

    SmartCell 6A000/ZX-250 Reference M anual B-3 Cause Codes 1 15 No response t o restart request 1 16 Link n ot active 1 17 Lin k not fo und 1 18 Calling p arty number not set. 1 19 Call control bl ock not f ound 120 Internal resource error 121 SAP not activ e T able B- 1 Cause cod e values and mean in g s Cause Code Meaning ...

  • Cabletron Systems 6A000/ZX-250 - page 258

    B-4 SmartCell 6A000/ZX-250 Reference Manual Cause Code s ...

  • Cabletron Systems 6A000/ZX-250 - page 259

    SmartCell 6A000/ZX-250 Referen ce Manual C-1 APPENDIX C T ECHNICAL SUPPORT This appen dix tells you what to do i f you need technical sup port for your S martCell ZX-250 switch . Cabletron of fers several s upport and servi ce progr ams that pr ovide hi gh-qua lity supp ort to our cust omers. F or techni cal support, first contact your place of p u ...

  • Cabletron Systems 6A000/ZX-250 - page 260

    C-2 S martCell 6A000/ZX-250 Reference Manual Technical Support  Detailed d escrip tion o f the iss ue (inclu ding hi story , what you 've tried, and condi tions un der which you see this o ccur)  Hardware model nu mber , software version, and sw itch configuration (that is, what part types are in what slots) Hardware W arranty Cabletron ...

  • Cabletron Systems 6A000/ZX-250 - page 261

    SmartCell 6A000/ZX-250 Reference Manual I-1 INDEX A AALType ............... .................. ............ 2-192 Abbrev iations .................................... ....... 1-3 Access Den ied .......................... .............. 2-79 accessi ng boot lo ad commands ................ 3-2 accessi ng the boot load prompt ................ 3-2 Activ ...

  • Cabletron Systems 6A000/ZX-250 - page 262

    I-2 SmartCell 6A000/ZX-250 Reference Manual Index C CACParams swit ch attr ibute ..... 2-20 to 2-21 CACStat swi tch attr ibute ........... 2-22 to 2-23 cause co des AAL para meters cannot be suppo rted ..... ........................... ........... B-2 Access i nformat ion di scarded ........... B-2 Bearer c apabili ty not aut horiz ed ....... B-2 B ...

  • Cabletron Systems 6A000/ZX-250 - page 263

    SmartCell 6A000/ZX-250 Reference Manual I-3 Index Cont rolTi meout ............... ....................... 2-83 conventi ons ............ ........................... ....... 1-2 Count ............................... .................. ... 2-129 CPE Int .......... ........................... ............ 2-165 CPU Board Rev ......................... ...

  • Cabletron Systems 6A000/ZX-250 - page 264

    I-4 SmartCell 6A000/ZX-250 Reference Manual Index F FIFO OR ............ ........................... ........ 2-164 Filte r Debu g Lv l ................................... 2-112 Filter Fl ags .................. .................. ........ 2-113 Filter Message Id ................................... 2-111 Filte r P arm Pos ........................... ...

  • Cabletron Systems 6A000/ZX-250 - page 265

    SmartCell 6A000/ZX-250 Reference Manual I-5 Index L2HOpSta tus ..................................... ... 2-178 LAN Name ...................... .............. 2-24, 2-66 LAN Type ........................... 2-25 , 2-42 , 2- 95 LEC Configs ........... .................. .............. 2-79 LECAddress ............................. .............. 2-75 ...

  • Cabletron Systems 6A000/ZX-250 - page 266

    I-6 SmartCell 6A000/ZX-250 Reference Manual Index Out Oc tets ............................ ................... 2-18 Out Unicas t ................................... .......... 2-18 Output Des tinatio n ............................... 2-112 Output Typ e ......................... ................. 2-111 P Para meter ............................. .... ...

  • Cabletron Systems 6A000/ZX-250 - page 267

    SmartCell 6A000/ZX-250 Reference Manual I-7 Index SPE Int ................... .................. ............ 2-165 spur In t ............................ .................. ... 2-164 Start r ecord ...................... .................. ... 2-113 Start FileNu m ................... ......................... 2-6 Starti ng file number ......... ... ...

  • Cabletron Systems 6A000/ZX-250 - page 268

    I-8 SmartCell 6A000/ZX-250 Reference Manual Index ...

Manufacturer Cabletron Systems Category Network Cables

Documents that we receive from a manufacturer of a Cabletron Systems 6A000/ZX-250 can be divided into several groups. They are, among others:
- Cabletron Systems technical drawings
- 6A000/ZX-250 manuals
- Cabletron Systems product data sheets
- information booklets
- or energy labels Cabletron Systems 6A000/ZX-250
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cabletron Systems 6A000/ZX-250.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cabletron Systems 6A000/ZX-250, service manual, brief instructions and user manuals Cabletron Systems 6A000/ZX-250. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cabletron Systems 6A000/ZX-250.

Similar manuals

A complete manual for the device Cabletron Systems 6A000/ZX-250, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cabletron Systems 6A000/ZX-250 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cabletron Systems 6A000/ZX-250.

A complete Cabletron Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cabletron Systems 6A000/ZX-250 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cabletron Systems 6A000/ZX-250, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cabletron Systems 6A000/ZX-250, that we can find in the current document
3. Tips how to use the basic functions of the device Cabletron Systems 6A000/ZX-250 - which should help us in our first steps of using Cabletron Systems 6A000/ZX-250
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cabletron Systems 6A000/ZX-250
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cabletron Systems 6A000/ZX-250 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cabletron Systems 6A000/ZX-250?

Use the form below

If you did not solve your problem by using a manual Cabletron Systems 6A000/ZX-250, ask a question using the form below. If a user had a similar problem with Cabletron Systems 6A000/ZX-250 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)