-
Sanyo PLV-HD10 - page 1
Owner's Man ual PL V -HD10 Multimedia Pr ojector MODEL ✽ Projection lens is optional. ...
-
Sanyo PLV-HD10 - page 2
2 C AU TI ON : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT ...
-
Sanyo PLV-HD10 - page 3
3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions ...
-
Sanyo PLV-HD10 - page 4
4 COMPLIANCES A C P ower Cord f or the United Kingdom : This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus . If the fuse cover is detachable, never use the pl ...
-
Sanyo PLV-HD10 - page 5
5 T ABLE OF CONTENTS TRADEMARKS ● Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc. ● IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc. ● Windows and PowerPoint are registered trademarks of Microsoft Corporation. ● Each name of corporations or products ...
-
Sanyo PLV-HD10 - page 6
6 FEA TURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compatibility This projector widely accepts various video and comput ...
-
Sanyo PLV-HD10 - page 7
7 PREP ARA TION ...
-
Sanyo PLV-HD10 - page 8
8 PREP ARA TION SETTING-UP PR OJECT OR This projector uses nominal input voltages of 120 V or 200-240 V AC. This projector automatically selects correct input voltage. It is designed to work with single- phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system. Cons ...
-
Sanyo PLV-HD10 - page 9
9 PREP ARA TION POSITIONING PR OJECT OR Before setting up a projector, install Projection Lens on a Projector. 1. Before installation, check where a projector is used and prepare suitable lens. For specifications of Projection Lens, refer to manual separately attached or contact sales dealer where you purchased a projector. 2. For installation, ref ...
-
Sanyo PLV-HD10 - page 10
10 PREP ARA TION PICTURE LEVEL AND TIL T ADJUSTMENT Picture tilt and projection angle can be adjusted with handles on both sides of a projector. Projection angle can be adjusted to 5.7 degrees upper way. 1 2 3 MO VING PROJECT OR CA UTION IN CARR YING OR TRANSPORTING A PROJECT OR ● Do not drop or bump a projector, otherwise damages or malfunctions ...
-
Sanyo PLV-HD10 - page 11
11 CONNECTING PR OJECT OR TERMINALS OF PR OJECT OR This projector applies various input/output terminals and 4 terminal slots for expansion to tune to diversity of signals from computers and video equipment. 4-built-in Terminal Slots enable you to arrange desired combinations of input sources just by changing Terminal Boards. For Terminal Boards, c ...
-
Sanyo PLV-HD10 - page 12
12 CONNECTING PR OJECT OR ...
-
Sanyo PLV-HD10 - page 13
13 CONNECTING PR OJECT OR Connect an external audio amplifier to these jacks. (Refer to P14, 15.) AUDIO OUTPUT JACKS This projector uses a micro processor to control unit. Occasionally, micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart unit. Do not use RESET ...
-
Sanyo PLV-HD10 - page 14
...
-
Sanyo PLV-HD10 - page 15
15 CONNECTING PR OJECT OR CONNECTING T O VIDEO EQUIPMENT INPUT 1 INPUT 2 INPUT 3 CONTROL PORT CONTROL PORT AUDIO R/Pr G/Y B/Pb H/HV V (MONO) R L (MONO) AUDIO OUT R L R/C JA CK USB SERIAL PORT IN SERIAL PORT OUT RESET INPUT 4 SDI IN1 SDI IN2 SDI OUT DVI AUDIO (MONO) R L Video Source (example) Audio Amplifier Audio Speaker (stereo) Audio Cable (Stere ...
-
Sanyo PLV-HD10 - page 16
16 IMAGE button Selects image levels. (P32) BEFORE OPERA TION MENU A UTO PC ADJUST IMA GE SELECT V OLUME ZOOM FOCUS LENS SHIFT ON-OFF INPUT 1/2 INPUT 3/4 SIDE CONTR OLS AND INDICA T ORS Adjust zoom. (P23) INPUT 3/4 button POWER ON–OFF button FOCUS buttons VOLUME buttons Select input source either INPUT 3 or INPUT 4. (P25) Adjust focus. (P23) Adju ...
-
Sanyo PLV-HD10 - page 17
17 BEFORE OPERA TION READ Y LAMP LAMP REPLA CE W ARNING TEMP . READY indicator LAMP indicator LAMP REPLACE indicator This indicator lights green when a projector is ready to be turned on. And it flashes green in Power Management mode or internal projector temperature is to high. (P37, 39) This indicator is dim when a projector is turned on. And bri ...
-
Sanyo PLV-HD10 - page 18
18 BEFORE OPERA TION OPERA TION OF REMO TE CONTR OL RESET ▲ ▲ ▲ ▲ ...
-
Sanyo PLV-HD10 - page 19
Remote Control Code Number of Times of Pressing IMAGE Button 19 BEFORE OPERA TION To insure safe operation, please observe following precautions : ● Use (2) AA, UM3 or R06 type alkaline batteries. ● Replace two batteries at same time. ● Do not use a new battery with an used battery. ● Avoid contact with water or liquid. ● Do not expose Re ...
-
Sanyo PLV-HD10 - page 20
20 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU OPERA TION Display ON-SCREEN MENU Press MENU button to display ON-SCREEN MENU (MENU BAR). A red frame is POINTER. Move POINTER (red frame) to MENU ICON that you want to select by pressing POINT RIGHT / LEFT buttons. Adjust ITEM DATA by pressing POINT RIGHT / LEFT buttons. ...
-
Sanyo PLV-HD10 - page 21
21 BEFORE OPERA TION MENU B AR SETTING MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P35-38) GUIDE WINDOW Shows selected item of ON- SCREEN MENU. SYSTEM BOX Used to select computer system or video system. Shows selected system on this box. (Refer to P26-27) INPUT MENU Used to select input source (Input 1, Input ...
-
Sanyo PLV-HD10 - page 22
22 B ASIC OPERA TION TURNING ON PR OJECT OR TURNING OFF PR OJECT OR TURNING ON / OFF PR OJECT OR Connect a projector's AC Power Cord into a wall outlet and turn MAIN ON/OFF SWITCH to ON. LAMP indicator lights RED, and READY indicator lights GREEN. Press POWER ON-OFF button on Side Control or on Remote Control Unit to ON. LAMP indicator dims, a ...
-
Sanyo PLV-HD10 - page 23
23 B ASIC OPERA TION ADJUSTING SCREEN ZOOM ADJUSTMENT FOCUS ADJUSTMENT 1 Press ZOOM ▲ / ▼ button on Side Control or on Remote Control Unit. Message “ Zoom ” is displayed. 2 Press ZOOM ▲ button to make image larger, and press ZOOM ▼ button to make image smaller. 1 Press FOCUS ▲ / ▼ button on Side Control or on Remote Control Unit. Me ...
-
Sanyo PLV-HD10 - page 24
24 B ASIC OPERA TION 1 2 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to SOUND Menu icon. Volume Press VOLUME (+/ – ) button(s) on Side Control or on Remote Control Unit to adjust volume. Volume dialog box appears on screen for a few seconds. (+) button to increase volume, and ( – ...
-
Sanyo PLV-HD10 - page 25
25 B ASIC OPERA TION When connect component video output (Cr, Y, Cb or Pr, Y, Pb) from video equipment to R/Pr, G/Y and B/Pb jacks. WHEN SELECT INPUT 2 (5 BNC TERMINAL) WHEN SELECT INPUT 1 (SDI TERMINAL ) Input 1 INPUT MENU SELECTING INPUT SOURCE MENU OPERA TION DIRECT OPERA TION Select INPUT source by pressing INPUT 1/2 and INPUT 3/4 buttons on Si ...
-
Sanyo PLV-HD10 - page 26
26 B ASIC OPERA TION SYSTEM SELECT This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, SXGA or UXGA (refer to “ COMPATIBLE COMPUTER SPECIFICATION ” on pages 50-51). When a computer is selected, this projector automatically tunes to incoming signal and projects the proper image without any special set ...
-
Sanyo PLV-HD10 - page 27
27 B ASIC OPERA TION SELECT VIDEO SYSTEM Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to SYSTEM SELECT Menu icon. Press POINT DOWN button to move a red arrow pointer to system that you want to select and then press SELECT button. 1 2 SYSTEM SELECT MENU (SDI) SYSTEM SELECT Menu icon Dis ...
-
Sanyo PLV-HD10 - page 28
28 DISPLA Y ADJUST DISPLA Y ADJUSTMENTS This projector has a picture screen resize function, which enables you to display desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to DISPLAY ADJUST Menu icon. 1 Press POINT UP/DOWN button and move a red frame pointer to Scree ...
-
Sanyo PLV-HD10 - page 29
29 DISPLA Y ADJUST A UT O PC ADJUSTMENT Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adjustment function can be operated as follows. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to DISPLAY ...
-
Sanyo PLV-HD10 - page 30
30 DISPLA Y ADJUST MANU AL DISPLA Y ADJUSTMENTS This projector can automatically tune to display signals from most computers and video equipments currently distributed. However, some computers and video equipments employ special signal formats which are different from standard ones and may not be tuned by Multi-Scan system of this projector. If thi ...
-
Sanyo PLV-HD10 - page 31
31 DISPLA Y ADJUST Press SELECT button to show information of computer selected. Current mode Adjusts clamp position. When image has a dark bar(s), try this adjustment. Clamp Press SELECT button at Current mode icon to show information of computer connected. Current mode Press SELECT button at this icon to display previous items. Reset Store Closes ...
-
Sanyo PLV-HD10 - page 32
32 IMAGE ADJUST MENU Move a red frame pointer to item to be selected and then press SELECT button. IMAGE ADJUST Menu icon IMA GE ADJUSTMENTS Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to IMAGE ADJUST Menu icon. 1 3 Press POINT UP/DOWN button to move a red arrow to level that you want ...
-
Sanyo PLV-HD10 - page 33
33 DISPLA Y ADJUST Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE ADJUST Menu icon. 1 2 Press POINT UP/DOWN button to move a red frame pointer to item that you want to adjust and then press SELECT button. Level of each item is displayed. Adjust each level by pressing POINT LEFT/ ...
-
Sanyo PLV-HD10 - page 34
34 DISPLA Y ADJUST Reset all adjustment to previous figure. Reset Store Closes IMAGE MENU. Quit Other icons operates as follows. To store manually preset image, move a red frame pointer to Store icon and press SELECT button. Image Level Menu will appear. Move a red frame pointer to Image 1 to 10 where you want to set and then press SELECT button. M ...
-
Sanyo PLV-HD10 - page 35
35 SETTING SETTING MENU Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red-frame pointer to SETTING icon. 1 2 Language Press POINT DOWN button to move a red-frame pointer to item that you want to set and then press SELECT button. Setting dialog box appears. When pressing SELECT button at Language, Langu ...
-
Sanyo PLV-HD10 - page 36
36 SETTING Logo When this function is “ On, ” projector displays logo when starting up. Menu position Ceiling When this function is “ On, ” picture is top / bottom and left / right reversed. This function is used to project the image from a ceiling mounting the projector. Rear When this function is “ On, ” picture is left / right revers ...
-
Sanyo PLV-HD10 - page 37
37 SETTING On start When this function is “ On, ” projector is automatically turned on just by connecting AC Power cord to a wall outlet. Note ; B e sure to turn projector off properly (refer to section “ TURNING OFF PROJECTOR ” on P22). If projector is turned off in wrong steps, On Start function does not operate properly. Power management ...
-
Sanyo PLV-HD10 - page 38
38 SETTING Lamp counter reset Key lock Factory default Press POINT UP/DOWN button to move a red frame pointer to “ Factory default ” and then press SELECT button. The message "Return to Factory default?" is displayed. Move the pointer to [Yes] and then press SELECT button. Another confirmation dialog box appears and select [Yes] and t ...
-
Sanyo PLV-HD10 - page 39
READ Y LAMP LAMP REPLACE W ARNING TEMP . 39 AIR FIL TER CARE AND CLEANING Turn power off, and disconnect AC power cord from AC outlet. 1 2 Air Filter prevents dust from accumulating on surface of Projection Lens and Projection Mirror. Should Air Filter become clogged with dust particles, it will reduce Cooling Fans' effectiveness and may resul ...
-
Sanyo PLV-HD10 - page 40
40 LAMP MANA GEMENT This Projector is equipped with 4 Projection Lamps to ensure brighter image and those lamps are controlled by Lamp Management Function. Lamp Management Function detects status of all lamps and shows status on screen or on LAMP REPLACE indicator. This function also automatically controls Lamp Mode when any of lamps is out for end ...
-
Sanyo PLV-HD10 - page 41
41 APPENDIX Check number of lamp to be replaced on Lamp Status Display. Remove two screws on Lamp Cover and press button to open Lamp Cover. (See right figure.) 1 3 Loosen two screws and pull out Lamp Assembly to be replaced by grasping handle. 4 Turn off a projector and disconnect AC Power Cord. Allow a projector to cool down for at least 45 minut ...
-
Sanyo PLV-HD10 - page 42
42 APPENDIX This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard. ● Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for each lamp. Some lamps may fail or termin ...
-
Sanyo PLV-HD10 - page 43
43 ● Check audio cable connection from audio input source. ● Adjust audio source. ● Press VOLUME (+) button. ● Press MUTE button. TR OUBLESHOO TING Before calling your dealer or service center for assistance, check matters below once again. 1. Make sure you have connected a projector to your computer or video equipment as described in secti ...
-
Sanyo PLV-HD10 - page 44
44 APPENDIX SER VICE W ARNING: High voltages are used to operate this pr ojector . Do not attempt to open cabinet. You can often correct operating problems yourself. If a projector fails to work properly, see "TROUBLESHOOT- ING" section on pages 43-44. To correct failure, try "Solutions". If after following all operating instruc ...
-
Sanyo PLV-HD10 - page 45
45 APPENDIX INDICA T ORS AND PR OJECT OR CONDITION Check the Indicators for projector condition. • • • on : red • • • dim • • • off • • • flashing : red ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new ...
-
Sanyo PLV-HD10 - page 46
46 APPENDIX SDI 1 SYSTEM Input 2 Y, Pb/Cb, Pr/Cr SYSTEM 3) 1) Input 1 RGB Input 2) System System SVGA 3 Custom SVGA 1 SVGA 2 Auto PC Adj. Fine sync Total dots Horizontal Vertical Current mode Clamp Display area Display area H Display area V Store Quit 0 - 31 Display adjust 720 x 400 800 x 600 1024 x 768 1152 x 864 1280 x 720 1280 x 1024 Quit 1600 x ...
-
Sanyo PLV-HD10 - page 47
47 APPENDIX Lamp 2 Sound Mute Quit Volume Built-in SP. On/Off On/Off 0 - 63 Language Setting English German French Italian Spanish Portuguese Dutch Swedish Chinese Korean Japanese On/Off On/Off On/Off On/Off Off/Ready/Shut down On/Off 4 Lamp/2 Lamp Lamp 1 Menu position Ceiling Power management On start Lamp mode Remote control code Lamp counter res ...
-
Sanyo PLV-HD10 - page 48
48 APPENDIX Owner ’ s Manual AC Power Cord Wireless/Wired Remote Control Transmitter and Batteries Remote Control Cable DVI-VGA Cable and DVI Cable MAC/VGA Adapter 6 Types Light-Block Sheet (For option lens) 2 Types Lens Attachment (For option lens) Protective Dust Cover TECHNICAL SPECIFICA TIONS 1.65" TFT Active Matrix type, 3 panels Multi- ...
-
Sanyo PLV-HD10 - page 49
49 APPENDIX CONFIGURA TIONS OF TERMINALS DVI-I TERMINAL (DIGITAL/ANALOG) This terminal accepts only Digital (TMDS) or Analog (RGB) output signal. Connect display output terminal of computer to this terminal with DVI cable (supplied). 1 9 17 2 10 18 3 11 19 4 12 20 5 13 21 6 14 22 7 15 23 8 16 24 C1 C2 C3 C5 C4 T.M.D.S. Data2 – No Connect T.M.D.S. ...
-
Sanyo PLV-HD10 - page 50
50 APPENDIX COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this projector can accept a signal from all computers with V, H-Frequency mentioned below and less than 230 MHz of Dot Clock. –––––––– (Interlace) 1024 x 768 (Interlace) ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 31.4 ...
-
Sanyo PLV-HD10 - page 51
51 APPENDIX NOTE : Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) D-VGA 640 x 480 31.47 59.94 D-480p 720 x 480 ( Progressive ) 31.47 59.88 D-575p 768 x 575 ( Progressive ) 31.25 50.00 D-SVGA 800 x 600 37.879 60.32 D-XGA 1024 x 768 43.363 60.00 ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V ...
-
Sanyo PLV-HD10 - page 52
Printed in Japan Part No. 610 306 0620 (1AA6P1P3943-- M4MA) SANY O Electric Co., Ltd ...
Do you have a question concerning Sanyo PLV-HD10?
Use the form below
If you did not solve your problem by using a manual Sanyo PLV-HD10, ask a question using the form below. If a user had a similar problem with Sanyo PLV-HD10 it is likely that he will want to share the way to solve it.