Manual Jura ENA 5

34 pages Not applicable
Download

Go to site of 34

Summary
  • Jura ENA 5 - page 1

    The ‘ENA 5 Instructions for Use’ has been awarded the seal of approv al by the independent German T echnical Inspection Agency, TÜV SÜD , due to its easy-to-under stand style, its thoroughness and cover age of safety aspect s. Instruc tions for Use en en it en it ...

  • Jura ENA 5 - page 2

    2 ENA 5 These safeguards apply for machine s with UL safety test (see r ating plate and chapter 8, ‘T echnical data’). When using electrical appliances, basic safety precautions should alwa ys be follow ed, to reduce the risk of fire , electric shock, and/or injury to per sons, including the follo wing: Z Read all instructions. Z Do not touch h ...

  • Jura ENA 5 - page 3

    3 ENA 5 a. A short power supply cord is provided to reduc e the risk resulting from becoming entangled in or tripping over a long c ord. Y our ENA has a 3-pin grounded plug. b. Longer extension cords are available and ma y be used if care is exercised in their use . c. If an extension cord is used, 1. the marked electrical rating of the extension c ...

  • Jura ENA 5 - page 4

    4 ENA 5 Z Never fill instant coff ee, c hocolate mix etc. into the grinder or ground coffee funnel (grinder b y-pass). It will damage the functioning of the brewing chamber . Z Never fill sugar c oated coffee beans int o the bean hopper . In case of doubt, call your dealer . Z Never fill an ything other than coffee beans into the bean container (no ...

  • Jura ENA 5 - page 5

    5 ENA 5 en en it en it ...

  • Jura ENA 5 - page 6

    6 ENA 5 Y our ENA 5 IMPORT ANT SAFEGU ARDS 2 Control elements 8 Proper use 10 For y our safety 10 W elcome to the world of JURA 11 JURA on the Internet .......................................................................................................... ................................... 11 Knowledge Builder .................................. ...

  • Jura ENA 5 - page 7

    7 ENA 5 Rinsing the Professional Cappuccino F rother ................................................................................................. 26 Cleaning the Professional Cappuccino F rother .............................................................................................. 2 7 Dismantling and rinsing the Professional Cappuccino ...

  • Jura ENA 5 - page 8

    8 ENA 5 1 2 3 4 5 6 7 10 9 8 1 W ater tank 2 Powder c hute for pre-ground coffee 3 Coffee grounds container 4 Drip tra y 5 Cup platform 6 Bean container cover 7 l Switc h for hot w ater and steam preparation 8 Connector System © for remov able nozzles 9 Easy Cappuccino Fr other 10 Rotating coffee spout Control elements ENA Figure: ENA 5 Blossom Wh ...

  • Jura ENA 5 - page 9

    9 ENA 5 1 4 5 2 3 6 7 1 Q On/off button 2 Grinding wheel 3 Cover 4 P P button 5 c Maintenance button 6 g Rotar y Switc h 7 Display 8 Professional Cappuccino F rother 9 Easy Cappuccino Fr other 10 2-stage frothing nozzle 11 Hot water no zzle The following no zzles are available from st ockists and can be fitted to the Connector System © : 89 1 01 1 ...

  • Jura ENA 5 - page 10

    10 ENA 5 Proper use The machine has been designed and built for domestic use. It should only be used to prepare coffee and to heat milk and w ater . Use for any other purpose will be deemed improper . JURA Elektroapparat e AG cannot acc ept any responsibility for the consequences of improper use. Before using the machine alw ays carefully read and ...

  • Jura ENA 5 - page 11

    11 ENA 5 People , including children, who Z do not have the ph ysical, sensory or ment al capabilities to use the machine safely or Z are inexperienced or lack knowledge in ho w to use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it correctly . Safe handling of the CLARIS filter ca ...

  • Jura ENA 5 - page 12

    12 ENA 5 Z Hot wat er nozzle 3-colour plain text display Y our ENA features a 3-colour plain text display . The colours of the display texts have the following meanings: Z Green: Y our ENA is ready for use. Z Red: The ENA is prompting y ou to perform an action. Z Y ellow: Y ou are in programming mode . 1 Preparing and using for the first time This ...

  • Jura ENA 5 - page 13

    13 ENA 5 g T T urn the Rotary Switch until LANGUAGE ENGL I SH is display ed. k T Press the Rotary Switch to c onfirm the language setting. OK , the language is then adjusted. O PEN TAP T Place a receptacle under the nozzle. l T T urn the switch to position m . SY STEM F I LL I NG CLOSE TAP y T T urn the switch to position o . HEA T I NG PRES S R OT ...

  • Jura ENA 5 - page 14

    14 ENA 5 k T Press the Rotary Switch. O PEN TAP l T T urn the switch to position m . F I L TER R I NS I NG , water is dis- charged from the nozzle . E Rinsing of the filter can be interrupted at any time . T o this purpose turn the switch clockwise. E The wat er may be slightly discoloured. This is not harmful to health and does not affect the tast ...

  • Jura ENA 5 - page 15

    15 ENA 5 U If the fineness of grind setting is too fine , the coffee only drips from the c offee spout. Z Select a coarse setting for a darker roast. U If the fineness of grind is too coarse the coffee flow s too quickly from the coffee spout. Example : Adjusting the fineness of grind during coffee prepar ation. T Place the cup under the coffee spo ...

  • Jura ENA 5 - page 16

    16 ENA 5 2 Preparation 1 coffee at the touc h of a button Precondition : READ Y appears on the display . T T urn the coffee spout to the 1 c up position. T Place the cup under the coffee spout. k T Press the Rotary Switch to start coffee preparation. During grinding the strength of the coffee is briefly display ed. 1 C UP , the pre -set amount of w ...

  • Jura ENA 5 - page 17

    17 ENA 5 1 C UP , the pre -set amount of water flo ws into the cup, prepar ation stops aut omati- cally . READY E It is also possible to prepare two cups of pre-ground coffee. T o this purpose place two level measuring spoons of pre-ground coffee into the filler funnel. T urn the Rotar y Switc h to 2 CU PS and press to star t coffee prepar ation. O ...

  • Jura ENA 5 - page 18

    18 ENA 5 T Place a cup under the nozzle. T Set the selec tor lever of the no zzle to the milk foam p position. g T T urn the Rotary Switch until STEAM is display ed. k T Press the Rotary Switch. HEA T I NG READY appear s as soon as the ENA is sufficiently heated. l T T urn the switch to position m . STEAM , the milk foam is being prepared. y T T ur ...

  • Jura ENA 5 - page 19

    19 ENA 5 Cappuccino with the 2-stage frothing nozzle Precondition : READ Y appears on the display and the coffee spout is set at the 1 cup position. T Push the 2-stage frothing nozzle to the lower po sition. T Place a cup of milk below the 2-stage frothing nozzle and immerse the nozzle in the milk. E If the nozzle does not reach into the c up, lift ...

  • Jura ENA 5 - page 20

    20 ENA 5 Heating milk with the 2-stage frothing nozzle Precondition : READ Y appears on the display . T Push the 2-stage frothing nozzle to the top position. T Place a cup of milk below the 2-stage frothing nozzle and immerse the nozzle in the milk. E If the nozzle does not reach int o the cup, lift the cup tow ards the nozzle . g T T urn the Rotar ...

  • Jura ENA 5 - page 21

    21 ENA 5 Precondition : READ Y appears on the display . T O pen the cov er behind the Rotary Switch. P T Press the P button until R I NSE appears. g T T urn the Rotary Switch until PRO DUCT is display ed. k T Press the Rotary Switch to enter the programme item. WATER g T T urn the Rotary Switch until ARO MA is display ed. k T Press the Rotary Switc ...

  • Jura ENA 5 - page 22

    22 ENA 5 g T T urn the Rotary Switch until 2 H R S is display ed. k T Press the Rotary Switch to c onfirm the setting. OK , the automatic switch-off time is then adjusted. O FF A FTER g T T urn the Rotary Switch until EX I T is display ed. k T Press the Rotary Switch to exit progr am- ming mode. READY Units of water The unit for the amount of wa te ...

  • Jura ENA 5 - page 23

    23 ENA 5 Z Rinse the nozzle regularly if it is used to w arm or froth milk. Rinsing the machine – manually When the ENA is switched on, a prompt to perform a rinse operation automatically appears after heating. When the ENA is switched off, the system is automatically rinsed if a coffee spec iality has been prepared. The ‘Rinse machine’ oper ...

  • Jura ENA 5 - page 24

    24 ENA 5 Rinsing of the filter stops automatically , CLOSE TAP . y T T urn the switch to position o . HEA T I NG READY Changing the filter – manually The ‘Change filter’ oper ation can be manually initiated. Precondition : READY appear s on the display . T O pen the cov er behind the Rotary Switch. P T Press the P button until R I NSE appears ...

  • Jura ENA 5 - page 25

    25 ENA 5 T T urn the coffee spout to the 1 c up or 2 cup position. Cleaning the machine – manually The ‘Clean machine ’ operation can be manually initiated. Precondition : READY appear s on the display . T O pen the cov er behind the Rotary Switch. P T Press the P button until R I NSE appears. k T Press the Rotary Switch to enter the programm ...

  • Jura ENA 5 - page 26

    26 ENA 5 T Place a receptacle (500 ml min.) under the the Connector System © . l T T urn the switch to position m . DE - SCAL I NG , water flo ws out of the Connector System © sever al times. CLOSE TAP y T T urn the switch to position o . DE - SCAL I NG , the descaling operation is continued. EMPTY TRA Y T Empt y the coffee grounds container and ...

  • Jura ENA 5 - page 27

    27 ENA 5 Cleaning the Professional Cappuccino F rother T o ensure that the Professional Cappuccino F rother works perfectly, y ou should clean it daily when you hav e been preparing milk. CAUTION If the wrong cleaning agent is used, the machine could be damaged and/or detergent residues could be left in the water . T O nly use original JURA care pr ...

  • Jura ENA 5 - page 28

    28 ENA 5 E The ENA will not prompt you t o rinse the Easy Cappuccino F rother . T Remove the milk pipe from the milk carton or milk container . T Fill a recept acle with fresh w ater and immerse the milk pipe in the water . T Place another receptacle under the nozzle. g T T urn the Rotary Switch until STEAM is display ed. k T Press the Rotary Switc ...

  • Jura ENA 5 - page 29

    29 ENA 5 Dismantling and rinsing the Easy Cappuccino F rother T Carefully remove the Easy Cappuccino F rother from the Connector System © . T Dismantle the nozzle completely . T Rinse all nozzle par ts thoroughly with running wat er . T Reassemble the Easy Cappuccino F rother and attach it to the Connector System © . Dismantling and rinsing the 2 ...

  • Jura ENA 5 - page 30

    30 ENA 5 5 Display messages Message Cause/Result Action F I LL WATER T ANK The water tank is empty . Y ou cannot prepare any coffee specialities, hot wa ter or steam. T Fill the wat er tank (refer to Chapter 1 ‘Preparing and using for the first time – Filling the water tank’). EMPTY GRO U NDS The coffee grounds container is full. Y ou cannot ...

  • Jura ENA 5 - page 31

    31 ENA 5 6 T roubleshooting Problem Cause/Result Action Grinder is making a very loud noise. There are foreign objects in the grinder . T Contact customer suppor t in your country. Contact information is av ailable on the company w ebsite at www .jura.c om. The nozzle does not produce enough milk foam. The nozzle is either in the wrong position or ...

  • Jura ENA 5 - page 32

    32 ENA 5 7 T ransport and environmentally neutral disposal T ransport / Empt ying the system K eep the packaging of your ENA. It should be used to protect the machine during transpor - tation. In order to protect the ENA from frost during transportation, the system must be emptied. Precondition : READY appear s on the display . g T T urn the Rotary ...

  • Jura ENA 5 - page 33

    33 ENA 5 Index 2-stage frothing nozzle 9 Dismantling and rinsing 29 3-colour plain text display 12 A Adjusting Energy-saving mode 21 Grinder 14 Language 22 Units of water 22 Automatic switch-off 21 B Bean container Cleaning 29 Filling 12 C Cappuccino With the 2-stage frothing nozzle 19 With the Easy Cappuccino F rother 18 With the Professional Capp ...

  • Jura ENA 5 - page 34

    34 ENA 5 P P button 9 Powder c hute for pre-ground coffee 8 Preparation Coffee 16 Pre-ground coffee 16 Preparing Hot water 20 Preparing and using for the first time 12 Professional Cappuccino F rother 9 Cleaning 27 Dismantling and rinsing 27 Rinsing 26 Programming mode Automatic switch-off 21 Prompt to take action Symbol description 7 R Rating plat ...

Manufacturer Jura Category Coffee maker

Documents that we receive from a manufacturer of a Jura ENA 5 can be divided into several groups. They are, among others:
- Jura technical drawings
- ENA 5 manuals
- Jura product data sheets
- information booklets
- or energy labels Jura ENA 5
All of them are important, but the most important information from the point of view of use of the device are in the user manual Jura ENA 5.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Jura ENA 5, service manual, brief instructions and user manuals Jura ENA 5. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Jura ENA 5.

Similar manuals

A complete manual for the device Jura ENA 5, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Jura ENA 5 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Jura ENA 5.

A complete Jura manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Jura ENA 5 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Jura ENA 5, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Jura ENA 5, that we can find in the current document
3. Tips how to use the basic functions of the device Jura ENA 5 - which should help us in our first steps of using Jura ENA 5
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Jura ENA 5
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Jura ENA 5 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Jura ENA 5?

Use the form below

If you did not solve your problem by using a manual Jura ENA 5, ask a question using the form below. If a user had a similar problem with Jura ENA 5 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)