-
Sony RM-AX4000A - page 1
Operating Instructions Integrated Remote Commander © 2005 Sony Corporation Getting Started Operating Unit Settings Setting by On-Remote Setup Additional Information RM-AX4000A RM-AX4000 Appendix This manual explains two models, RM-AX4000A and RM-AX4000. On the model RM-AX4000A, the supplied software “AX Remote Editor” is updated. ...
-
Sony RM-AX4000A - page 2
2 W ARNING To reduce the risk fir e or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only . Y ou are cautioned that any changes or modifications not expressly appr oved in this manual could void your authority to operate this equipment. Ow ...
-
Sony RM-AX4000A - page 3
3 Declaration of Conformity T rade Name: SONY Model number: RM-AX4000 Responsible Party: Sony Electronics Inc. Address: 16530 V ia Esprillo, San Diego, CA 92127 USA T elephone number: 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfere ...
-
Sony RM-AX4000A - page 4
4 F eatur es The RM-AX4000 Remote Commander provides centralized contr ol of all your AV components from a single remote control and saves the tr ouble of operating differ ent A V components with differ ent r emote contr ol devices. The following are its main features. Control up to 16 components W ith the Remote Commander , you can control up to 1 ...
-
Sony RM-AX4000A - page 5
5 Learning function lets you program other remote contr ol signals you may need The Remote Commander can learn the r emote contr ol infrared signals of non- preset components. The Remote Commander can learn remote contr ol signals (infrared signals only) of other devices such as air conditioners, lights, etc. (some specific appliances or functions ...
-
Sony RM-AX4000A - page 6
6 T able of Contents Getting Started Unpacking ............................................................................................................................. 8 Location and function of controls ........................................................................................ 8 Installing the batteries ......................... ...
-
Sony RM-AX4000A - page 7
7 Setting by On-Remote Setup Setting the preset codes ..................................................................................................... 45 Using non-preset remote contr ol operations – Learning function ..................................... 47 To clear the learned signal from a key or button ................................... ...
-
Sony RM-AX4000A - page 8
8 Getting Started Unpacking Check the contents of the package before using the Remote Commander . • Remote Commander RM-AX4000 (1) Although the packaging may say RM- AX4000A, the Remote Commander is RM-AX4000. • USB cable (1) • CD-ROM* (1) – AX Remote Editor software – Operating Instructions (PDF file) • Quick Start Guide (1) •P r ese ...
-
Sony RM-AX4000A - page 9
9 Getting Star ted 5 XPRESS button (page 22) The XPRESS names appear as the Label keys. When you press an XPRESS name, the operating display for that XPRESS function appears, and its macro is performed. 6 MENU button Calls up the menu screen for components that have menu function. 7 EPG button 8 OK and Cursor Control buttons 9 EXIT button q; TOOLS ...
-
Sony RM-AX4000A - page 10
10 Installing the batteries Slide and open the battery compartment lid and insert four size AA (R6) alkaline batteries (not supplied). Be sure to match the + and – of the batteries with the + and – of the battery compartment. When to replace the batteries When replacing the batteries, do it quickly. Otherwise, the memory settings for the clock ...
-
Sony RM-AX4000A - page 11
11 Getting Star ted Setting the clock When you install batteries the first time, the Remote Commander enters clock setup mode. “DS_TIME” appears as the Display title. “STD_TIME” lights and “SET” and “DS_TIME” flash on the Label keys. STD_TIME: standard time DS_TIME: daylight savings time DS_TIME SU LEARN NG SET [STD_TIME] DS_TIME 1 ...
-
Sony RM-AX4000A - page 12
12 4 Set the hour and AM (or PM) by pressing the F or f button. The selected hour and AM (or PM) flash. Next, press the g button. The hour and AM (or PM) are set. “00” (minute) and “SET” flash. CLOCK SU AM LEARN NG SET STD_TIME Note If you press the G button, the hour and AM (or PM) are set and the setting mode r eturns to step 3. 5 Set the ...
-
Sony RM-AX4000A - page 13
13 Getting Star ted Remote Commander settings and oper ating procedur es About the factory setting The Remote Commander is preset at the factory to operate most Sony brand A V components (see the table below). If you operate a non-Sony A V component, you need to set the component’s preset code on the Remote Commander first. Default components lis ...
-
Sony RM-AX4000A - page 14
14 Programmable items of On-PC Setup and On-Remote Setup * 1 System Control function is used to perform a programmed series of actions (a macr o) on several A V components by pressing just one button. * 2 An XPRESS function is also a macro function which executes a series of actions for controlling several A V components by pressing just one key . ...
-
Sony RM-AX4000A - page 15
15 Getting Star ted When using On-PC Setup If you set up the Remote Commander using On-PC Setup, you do not need to r ead this PDF manual “Setting by On- Remote Setup”. (pages 45 – 69) Setting procedur e for On- Remote Setup If you set the Remote Commander On- Remote Setup, follow the procedur e below . Step1: Setting the preset codes (page 4 ...
-
Sony RM-AX4000A - page 16
16 Setting up for your PC By installing the “AX Remote Editor” on the supplied CD-ROM onto your PC, you can set up the Remote Commander simply with your PC. “AX Remote Editor” makes setting up complex series of operations (a macro) easy , and also allows various other convenient functions to be set up. For details, see the Help menu provide ...
-
Sony RM-AX4000A - page 17
17 Getting Star ted 4 Click [Next]. Follow the on-screen instructions and proceed with the installation. Tip If the installation screen is hidden behind other windows If “AX Remote Editor 1.1 Setup” disappears behind other screen while installing, pr ess the [T ab] key several times while pressing down the [Alt] key to bring up “AX Remote Edi ...
-
Sony RM-AX4000A - page 18
18 For Windows XP users 1 Close all software r unning on Wi ndows. 2 Insert the supplied CD-ROM into the CD-ROM drive of the PC. After a moment, “RM-AX4000 Install CD Menu” appears. 3 Click [Exit] to close “RM-AX4000 Install CD Menu.” 4 Connect the PC and the Remote Commander using the supplied USB cable (page 19). “Found New Hardwar e” ...
-
Sony RM-AX4000A - page 19
19 Getting Star ted Connecting the Remote Commander to your PC Y ou can now connect the Remote Commander to your PC with the supplied USB cable. Connect whenever you want to verify correct operation of key/button commands for an XPRESS function, etc., or to exchange setup data between your PC and the Remote Commander . IMPORT ANT Do not keep the Re ...
-
Sony RM-AX4000A - page 20
20 T ips • If you are using an operating system other than Windows XP, click the “Start” button of Windows and point to “Programs” - “Sony AX” - “AX Remote Editor” and click to start up “AX Remote Editor”. • If “ ” (the shortcut icon of “AX Remote Editor”) appears on the desktop of Windows, double-click the icon to o ...
-
Sony RM-AX4000A - page 21
21 Operating Operating Operating the Remote Commander There ar e two ways to operate the components on the Remote Commander . • XPRESS operation: Y ou can operate multiple A V components related to a specific task, such as “watching a DVD,” or “watching a digital satellite,” etc. This is called an “XPRESS function.” • Single compone ...
-
Sony RM-AX4000A - page 22
22 Operating the XPRESS function EPG MENU SYSTEM CONTROL OK 1 MORE 4 3 COMPONENT VOLUME BACK X PRESS 2 RECALL LIGHT TIMER MUTING SYNC-UP CHANNEL EXIT TOOLS ALL OFF LEARN NG OFF COMMANDER When you press an XPRESS button on the Remote Commander , the XPRESS names appear at the bottom of the display . XPRESS /1 SU AM LEARN NG TV A-CBL D-SAT DVD When y ...
-
Sony RM-AX4000A - page 23
23 Operating Example: T o play a DVD player by XPRESS function (when On-PC Setup was used to set up the Remote Commander) 1 Press the XPRESS button. X PRESS “XPRESS” appears as the Display title. XPRESS /1 SU AM LEARN NG TV A-CBL D-SAT DVD If a page number such as “/1” appears to the right side of Display title, multiple pages are available ...
-
Sony RM-AX4000A - page 24
24 Example: T o play a DVD player by XPRESS function (when On- Remote Setup was used to set up the Remote Commander) 1 Press the XPRESS button. X PRESS “XPRESS” appears as the Display title. XPRESS /1 SU AM LEARN NG TV A-CBL D-SAT DVD If a page number such as “/1” appears to the right side of Display title, multiple pages are available. Pre ...
-
Sony RM-AX4000A - page 25
25 Operating 5 Press the key(s) or button(s) for desired operation. When the signal is sent, appears. Y ou can also use other buttons, such as the VOLUME +/–, CHANNEL +/–, MUTING, cursor , and MENU buttons. Also see “T able of preset functions” (page 76) for the functions of buttons for each source component. 6 When you are finished using t ...
-
Sony RM-AX4000A - page 26
26 Operating the Remote Commander (continued) 2 Press the component name you want to operate (in this case, TV). TV The component name appears as the Display title. And the keys you use to control the TV are displayed as T ouch-keys. TV /1 SU AM 2 13 5 46 ENTER 8 0 79 POWER WIDE INPUT SWAP DISPLAY MAIN/SUB 2PIC LEARN NG TV_TUNER ANT/SW If a page nu ...
-
Sony RM-AX4000A - page 27
27 Operating Continued When the signal is sent, appears. Y ou can also use other buttons, such as the VOLUME +/–, CHANNEL +/–, MUTING, cursor , and MENU buttons. Also see “T able of preset functions” (page 76) for the functions of buttons for each source component. 4 When you are finished using the Remote Commander , press the COMMANDER OFF ...
-
Sony RM-AX4000A - page 28
28 Operating the Remote Commander (continued) 2 Press the POWER key r epeatedly until the desired status fixes, then press the DONE key . DONE The screen switches to the next status to be synchronized. 3 Press the INPUT key r epeatedly until the desired status fixes, then press the DONE key . 4 When you are finished using the Remote Commander , pre ...
-
Sony RM-AX4000A - page 29
29 Operating Executing a series of actions at a scheduled time – Timer function EPG MENU SYSTEM CONTROL OK 1 MORE 4 3 COMPONENT VOLUME BACK X PRESS 2 RECALL LIGHT TIMER MUTING SYNC-UP CHANNEL EXIT TOOLS ALL OFF LEARN NG OFF COMMANDER The Remote Commander can perform a programmed commands automatically at a scheduled time every day or on a particu ...
-
Sony RM-AX4000A - page 30
30 How to set the Timer function For On-PC Setup: See the Help menu provided in “AX Remote Editor .” For On-Remote Setup: See “Setting the T imer” on page 59. To quickly switch the Timer on or off W ith the Remote Commander , you can quickly switch a T imer function on or off. The following procedur e is based on the assumption that a serie ...
-
Sony RM-AX4000A - page 31
31 Operating If you want to quit before finishing Press and hold the COMMANDER OFF button for more than 2 seconds. The pr evious status r eturns, and the Remote Commander turns of f. If you want to return to the previous display Press the BACK button or the COMMANDER OFF button. Notes • When you finish setting the timer standby mode, the “ ” ...
-
Sony RM-AX4000A - page 32
32 Notes • If the r emote control detectors of the components are too far apart, or if something is blocking them, some of the components may not operate in the ordered sequence when you press a SYSTEM CONTROL button or System Control key . • If some of the components did not operate correctly because of the above or for any other reason, alway ...
-
Sony RM-AX4000A - page 33
33 Operating Locking the controls – Hold function To prevent accidental operation, you can lock all the buttons with the Hold function. However , any programmed T imer functions will still be activated while the controls ar e locked. While pressing the COMMANDER OFF button, press the touch-key . A message reminding you to r elease the Hold functi ...
-
Sony RM-AX4000A - page 34
34 Unit Settings Setting the backlight The LCD display’s backlight is preset at the factory to activate whenever the Remote Commander is operated, and to switch off automatically if you do not operate for more than 10 seconds. Y ou can set the backlight automatic-off time, brightness, fade effect and which buttons activate the backlight. T o chan ...
-
Sony RM-AX4000A - page 35
Unit Settings 35 5 Press the BACK button or the COMMANDER OFF button. BACK or OFF COMMANDER “LIGHT” appears as the Display title. LIGHT SU LEARN NG OFF_TIME LEVEL FADE ON_MODE Note When you set the automatic-off time to longer than 10 seconds (factory setting), the battery life may be shorter . 6 Press “LEVEL” on the Label keys. LEVEL The s ...
-
Sony RM-AX4000A - page 36
36 10 Press the ON or OFF key to select the fade effect of the backlight. ON: fade in/out backlight OFF: normal backlight The fade effect of the backlight changes and a beep sounds each time you press the keys. 11 Press the BACK button or the COMMANDER OFF button. BACK or OFF COMMANDER “LIGHT” appears as the Display title. LIGHT SU LEARN NG OFF ...
-
Sony RM-AX4000A - page 37
Unit Settings 37 If you want to quit before finishing Press and hold the COMMANDER OFF button for more than 2 seconds. The pr evious status r eturns, and the Remote Commander turns of f. If you want to return to the previous display Press the BACK button or the COMMANDER OFF button. Setting the LCD display Setting the automatic-off time of the LCD ...
-
Sony RM-AX4000A - page 38
38 2 Press “DISPLA Y” on the Label keys. DISPLAY “DISPLA Y” appears as the Display title. DISPLAY SU LEARN NG DISP-OFF ALIGN CONTRAST 3 Press ”DISP-OFF” on the Label keys. DISP - OFF The setting display for automatic-off time of the LCD display appears. DISPLAY SU LEARN NG DISP-OFF (-) 05min (+) 4 Press the (–) or (+) key to change th ...
-
Sony RM-AX4000A - page 39
Unit Settings 39 Continued 3 Press the point on the top-right of the LCD display . The square appears in the center of the LCD display . ALIGNMENT SU LEARN NG 4 Press the squar e in the center of the LCD display . When the calibration is complete, the beep sounds, and the LCD display r eturns to the selecting display of display setting. DISPLAY SU ...
-
Sony RM-AX4000A - page 40
40 3 Press and hold the COMMANDER OFF button for more than 2 seconds. OFF COMMANDER The Remote Commander turns off. If you want to quit before finishing Press and hold the COMMANDER OFF button for more than 2 seconds. The pr evious status r eturns, and the Remote Commander turns of f. Setting the LCD display (continued) Setting the contrast of the ...
-
Sony RM-AX4000A - page 41
Unit Settings 41 3 Press “BEEP” on the Label keys. BEEP The setting display for beep appears. The current setting is shown inside the [ ], while the other flashes. OTHER SU LEARN NG BEEP [ ON ] OFF 4 Press the ON or OFF key to select the beep. ON: T urns on the beep. OFF: T urns off the beep. The beep setting changes and a beep sounds each time ...
-
Sony RM-AX4000A - page 42
42 Adjusting the clock Y ou can adjust the clock after setting. To change this setting, perform the following procedur e. 1 While pressing the COMMANDER OFF button, press the MUTING button. MUTING OFF COMMANDER “SET” appears as the Display title. SET SU LEARN NG LIGHT DISPLAY OTHER If “OTHER” does not flash on the Label keys, press the Disp ...
-
Sony RM-AX4000A - page 43
Unit Settings 43 6 Press and hold the COMMANDER OFF button for more than 2 seconds. OFF COMMANDER The Remote Commander turns off. If you want to quit before finishing Press and hold the COMMANDER OFF button for more than 2 seconds. The pr evious status r eturns, and the Remote Commander turns of f. If you want to return to the previous display Pres ...
-
Sony RM-AX4000A - page 44
44 3 Press “DS_TIME” on the Label keys. DS_TIME The setting display for daylight savings time appears. The current setting is shown inside the [ ], while the other flashes. OTHER SU LEARN NG DS_TIME [STD_TIME] DS_TIME 4 Press the STD_TIME or DS_TIME key . STD_TIME is 1 hour behind the DS_TIME. DS_TIME is 1 hour ahead of the STD_TIME. The settin ...
-
Sony RM-AX4000A - page 45
45 Setting by On-Remote Setup The following section explains On- Remote Setup. If you set the Remote Commander by On-PC Setup, these explanations are not valid. Setting the pr eset codes Y ou should register components to the Remote Commander by setting their preset codes. Setting of the preset code is r equired in the following cases: –T o use a ...
-
Sony RM-AX4000A - page 46
46 4 Select the component name you want the Remote Commander to preset by pr essing the Label key (in this case, TV). TV The “TV” and current pr eset code (in this case, “8001”) appear as the Label keys. “0” - “9,” “CLEAR” and “POWER” flash. PRESET 2 13 5 46 8 0 79 POWER CLEAR LEARN NG TV 8001 Note If another remote contr ol ...
-
Sony RM-AX4000A - page 47
47 Setting by On-Remote Setup If you want to quit before finishing Press and hold the COMMANDER OFF button for more than 2 seconds. The pr evious status r eturns, and the Remote Commander turns of f. If you want to return to the previous display Press the BACK button or the COMMANDER OFF button. Notes • If you enter a pr eset code that is not on ...
-
Sony RM-AX4000A - page 48
48 1 Place the Remote Commander head to head with your component’s remote contr ol. 2 While pressing the COMMANDER OFF button, press the MUTING button. MUTING OFF COMMANDER “SET” appears as the Display title. SET /1 SU LEARN NG PRESET LEARN MACRO TIMER 3 Press “LEARN” on the Label keys. LEARN “LEARN” appears as the Display title. The ...
-
Sony RM-AX4000A - page 49
49 Setting by On-Remote Setup 5 Press the key or button on the Remote Commander you want to “program” the pr eset code to. “ LEARN LEARN ” flashes and only the pressed key remains on the LCD display . TV /1 SU LEARN LEARN NG When you have programmed the buttons on the Remote Commander The names of buttons not on the LCD display (VOLUME +/? ...
-
Sony RM-AX4000A - page 50
50 7 Press the BACK button or the COMMANDER OFF button. BACK or OFF COMMANDER “LEARN” appears as the Display title. LEARN /1 SU LEARN NG TV A-CBL D-SAT DVD If you want to program another signal, repeat steps 4 - 6. 8 Press and hold the COMMANDER OFF button for more than 2 seconds. OFF COMMANDER The Remote Commander turns off. If you want to qui ...
-
Sony RM-AX4000A - page 51
51 Setting by On-Remote Setup F or accur ate learning • Do not move the remote units during the learning procedur e. • Be sure to pr ess and hold the button of the other remote contr ol until you hear the confirmation beep. • Use fresh batteries in both r emote control units. •A void learning in places under direct sunlight or strong fluor ...
-
Sony RM-AX4000A - page 52
52 1 While pressing the COMMANDER OFF button, press the MUTING button. MUTING OFF COMMANDER “SET” appears as the Display title. SET /1 SU LEARN NG PRESET LEARN MACRO TIMER 2 Press “MACRO” on the Label keys. MACRO “MACRO” appears as the Display title. MACRO SU LEARN NG SYSTEM XPRESS 3 Press “SYSTEM” on the Label keys. SYSTEM “SYSTE ...
-
Sony RM-AX4000A - page 53
53 Setting by On-Remote Setup 5 Select the component name you want the Remote Commander to program the series of actions (a macro) by pr essing the Label key (in this case, TV). TV The “TV” appears as the Display title, and the programmable keys for the selected component flash. TV /1 SU 2 13 5 46 ENTER 8 0 79 POWER WIDE INPUT SWAP DISPLAY MAIN ...
-
Sony RM-AX4000A - page 54
54 If you want to quit before finishing Press and hold the COMMANDER OFF button for more than 2 seconds. The setting is canceled, and the Remote Commander turns off. If you want to return to the previous display Press the BACK button or the COMMANDER OFF button. Notes • If you interrupt the procedur e at any point for over 2 minutes, the setting ...
-
Sony RM-AX4000A - page 55
55 Setting by On-Remote Setup 3 Press “SYSTEM” on the Label keys. SYSTEM “SYSTEM” appears as the Display title. SYSTEM SU LEARN NG SYSTEM5 SYSTEM6 SYSTEM7 SYSTEM8 4 While pressing the SYNC-UP button, press the pr ogrammed key or button you want to clear . A beep sounds, “SYSTEM” appears as the Display title. SYSTEM SU LEARN NG SYSTEM5 S ...
-
Sony RM-AX4000A - page 56
56 3 Press “XPRESS” on the Label keys. XPRESS The setting display for XPRESS macro activation appears. The current setting is shown inside the [ ], while the other flashes. MACRO SU LEARN NG XPRESS Macro ON [ OFF ] 4 Press the ON or OFF key to select the XPRESS macro activation. ON: T urns on the XPRESS macro activation. OFF: T urns off the XPR ...
-
Sony RM-AX4000A - page 57
57 Setting by On-Remote Setup Contr olling the volume of visual components connected to an audio component The Remote Commander is factory preset based on the assumption that you hear the sound of your visual components from your TV speakers, and that you hear sound of your audio components from the loudspeakers connected to your amplifier . This f ...
-
Sony RM-AX4000A - page 58
58 2 Press the Display title (SET) once. SET “VOLUME” flashes on the Label keys. SET /2 SU LEARN NG LABEL VOLUME LIGHT DISPLAY 3 Press “VOLUME” on the Label keys. VOLUME The setting display of volume control appears. The current setting is shown inside the [ ], while the other flashes. VOLUME SU LEARN NG VISUAL [ TV ] RCVR 4 Press the TV or ...
-
Sony RM-AX4000A - page 59
59 Setting by On-Remote Setup Setting the Timer Up to 8 T imers can be set on the Remote Commander . Y ou can program the T imer for the day of the week, the hour , the minute and a series of actions (a macro). Y ou can set each T imer to be executed or not. To program the T imer , perform the following procedur e. To progr am the Timer 1 While pre ...
-
Sony RM-AX4000A - page 60
60 4 Press “MACRO” on the Label keys. MACRO “COMPONENT” appears as the Display title. The component names flash on the Label keys. If a page number such as “/1” appears to the right side of Display title, multiple pages are available. Press the number to go to the next page. COMPONENT /1 SU LEARN NG TV A-CBL D-SAT DVD 5 Select the compo ...
-
Sony RM-AX4000A - page 61
61 Setting by On-Remote Setup When the maximum of 32 steps are input, the T imer macro pr ogramming finishes and a beep sounds, and the T imer macro displays in or der . PROG4 SU AM OFF LEARN NG ON/OFF MACRO TIME TEST Notes •Y ou can input up to 32 steps for one T imer . • If you need a manual delay between two steps, press the TIMER button to ...
-
Sony RM-AX4000A - page 62
62 9 Press the F or f button to set the day(s) of the week. Each time the F or f button is pressed the day(s) of the week change as follows. SU : Sunday MO : Monday TU : T uesday WE : W ednesday TH : Thursday FR : Friday SA : Saturday Then, press the g button. The day(s) of the week is set. “12” “AM” and “SET” flash. 10 Press the F / f ...
-
Sony RM-AX4000A - page 63
63 Setting by On-Remote Setup 12 Press the ON/OFF or TEST key to activate the T imer . ON/OFF: W ith a beep sound, “ON” appears on the top-right of the LCD display , and the Remote Commander enters the T imer standby mode. TEST : Y ou can check the T imer macro by transmitting the signals. PROG4 SU AM ON LEARN NG ON/OFF MACRO TIME TEST To reset ...
-
Sony RM-AX4000A - page 64
64 To clear a Timer macr o 1 While pressing the COMMANDER OFF button, press the MUTING button. MUTING OFF COMMANDER “SET” appears as the Display title. SET /1 SU LEARN NG PRESET LEARN MACRO TIMER 2 Press “TIMER” on the Label keys. TIMER “TIMER” appears as the Display title. The T imer numbers “PROG1” - “PROG4” flash on the Label ...
-
Sony RM-AX4000A - page 65
65 Setting by On-Remote Setup 5 Press “YES” on the Label keys. YES The T imer macro is clear ed, then “COMPONENT” appears as the Display title. COMPONENT /1 SU LEARN NG TV A-CBL D-SAT DVD If you press the NO key The T imer macro is not clear ed, and the display returns to step 3. 6 Press and hold the COMMANDER OFF button for more than 2 sec ...
-
Sony RM-AX4000A - page 66
66 2 Press the Display title (SET) once. SET “LABEL” flashes on the Label keys. SET /2 SU LEARN NG LABEL VOLUME LIGHT DISPLAY 3 Press “LABEL” on the Label keys. LABEL “LABEL” appears as the Display title. LABEL SU LEARN NG XPRESS COMPO SYSTEM TIMER 4 Select the type of Label key you want the Remote Commander to change by pressing the La ...
-
Sony RM-AX4000A - page 67
67 Setting by On-Remote Setup 6 Input digits or characters for the Label key by pressing the number keys (0 -9), SYMBOL 1 key or SYMBOL 2 key on the T ouch-key . Begin inputting digits or characters from the left. Pr ess the number key r epeatedly until you obtain the desired digit or character . The digits or characters are assigned to the keys as ...
-
Sony RM-AX4000A - page 68
68 Er asing all the settings – Reset Y ou can clear all the settings to reset the Remote Commander to its factory settings. 1 While pressing the COMMANDER OFF button, press the MUTING button. MUTING OFF COMMANDER “SET” appears as the Display title. SET /1 SU LEARN NG PRESET LEARN MACRO TIMER 2 Press the Display title (SET) twice. SET “OTHER ...
-
Sony RM-AX4000A - page 69
69 Setting by On-Remote Setup 6 Press the “YES” on the Label keys. W ith a beep sound, the all settings are cleared. 7 Press and hold the COMMANDER OFF button for more than 2 seconds. OFF COMMANDER The Remote Commander turns off. If you want to quit before finishing Press and hold the COMMANDER OFF button for more than 2 seconds. The pr evious ...
-
Sony RM-AX4000A - page 70
70 Specifications Operating distance Approx. 32.8 ft. (10 meters) (varies depending on components of differ ent manufacturers) Power requir ements Remote control and backlight: Four size AA (R6) batteries Battery life Approx. 5 months (a Sony TV turned on/of f up to approx. 300 times per day) Dimensions Approx. 4 3 / 4 × 1 1 / 4 × 7 in. (w × h ? ...
-
Sony RM-AX4000A - page 71
71 Additional Information Tr oubleshooting If you have problems setting up or using the Remote Commander , first check the batteries (page 10), then check the items below . Refer also to Help of “AX Remote Editor .” Continued Trouble with the Remote Commander's basic settings Problem The Remote Commander does not turn on. The LCD display t ...
-
Sony RM-AX4000A - page 72
72 Problem “RECOVERY” appears on the screen and all the buttons are disabled. The component does not work when checking the code setting on the Emulator. The visual/audio component's volume cannot be controlled by the Remote Commander. A System Control function does not work properly. Even if you set the Timer macro, the component does not ...
-
Sony RM-AX4000A - page 73
73 Additional Information Problem Even if you operate an XPRESS function, the Source component does not turn on, or it turns off. Even if you operate an XPRESS function, the input selector of the TV or RCVR (Receiver/Amplifier) does not achieve the correct status. Air-Slide does not work properly. Trouble with setting mode Solution • The Remote C ...
-
Sony RM-AX4000A - page 74
74 Problem Learning fails. “NG” flashes twice when learning. The Remote Commander does not memorize the radio band change (AM/ FM) or frequency. The setting display does not appear. The setting mode unintentionally quits while setting up. “PRESET”, “LEARN”, “MACRO”, ”TIMER”, and ”LABEL” do not appear on the LCD display. Tr o ...
-
Sony RM-AX4000A - page 75
75 Additional Information Customer Support Information After you have read thr ough this manual, if you still cannot get the Remote Commander to work properly , call the Sony Customer Support Helpline at 1-800-822-2217. Problem I want to restore all the settings. I want to use multiple components (VCR+DVD, TV+VCR, DVD+RCVR (receiver), etc.) with XP ...
-
Sony RM-AX4000A - page 76
76 KEY DISPLAY POWER 1 – 9, 0, ENTER • 2PIC SWAP DISPLAY MAIN/SUB INPUT WIDE F f g G OK EPG MENU TV FUNCTION To turn the power on/off To change the channel (To change to channel 5, for example, press 0 and 5, or press 5 and ENTER.) To enter the subchannel number To turn on/off the twin pictures To swap the main picture and the sub picture To di ...
-
Sony RM-AX4000A - page 77
77 Appendix Continued KEY DISPLAY POWER 1 – 9, 0, ENTER +100 DISPLAY VOLUME + VOLUME – CHANNEL + CHANNEL – MUTING RECALL A-CBL (Analog Cable box) FUNCTION To turn the power on/off To change the channel (To change to channel 5, for example, press 0 and 5, or press 5 and ENTER.) To select numbers 100 and above To turn on the display Volume up ( ...
-
Sony RM-AX4000A - page 78
78 T able of preset functions (continued) KEY DISPLAY POWER 1 – 9, 0, ENTER • INFO S.INDEX DISPLAY FAVORITE INPUT F f g G OK EPG MENU EXIT TOOLS VOLUME + VOLUME – CHANNEL + CHANNEL – MUTING D-SA T (Digital Satellite) FUNCTION To turn the power on/off To change the channel (To change to channel 5, for example, press 0 and 5, or press 5 and E ...
-
Sony RM-AX4000A - page 79
79 Appendix Continued KEY DISPLAY POWER 1 – 9, 0 +10 ENTER A/B m N M TOP_MENU x X DISPLAY . Z * > T • SUBTITLE • t F f g G OK MENU DV D (DVD player) FUNCTION To turn to the power on/off Number buttons: To set items selected from the screen To select numbers 10 and above To enter a setting or to set items selected from the screen To decide ...
-
Sony RM-AX4000A - page 80
80 T able of preset functions (continued) KEY DISPLAY POWER 1 – 9, 0, ENTER m N M REC * 1 x X DISPLAY MAIN/SUB Z * 2 INPUT • t F f g G OK MENU EXIT VOLUME + VOLUME – CHANNEL + CHANNEL – MUTING PLAY x2 Q.TIMER VCR (V ideo Cassette Recorder) FUNCTION To turn the power on/off To change the channel (To change to channel 5, for example, press 0 ...
-
Sony RM-AX4000A - page 81
81 Appendix Continued KEY DISPLAY POWER 1 – 9, 0, ENTER • INFO m N M S.INDEX REC * 2 x X DISPLAY . FAVORITE > INPUT T • LIST * 1 • t F f g G OK D VR ( Digital V ideo Recorder) – DVR, PVR, DVR/Satellite Combo, DVR/Cable Combo FUNCTION To turn the power on/off To change the channel (To change to channel 5, for example, press 0 and 5, or ...
-
Sony RM-AX4000A - page 82
82 T able of preset functions (continued) KEY DISPLAY POWER 1 – 9, 0 +10 ENTER m N M x X DISPLAY . Z * > CLEAR D.SKIP VOLUME + VOLUME – MUTING REPEAT SHUFFLE PROGRAM CONTINUE CD (CD player) FUNCTION To turn the power on/off To select the track number To select numbers 10 and above To enter the setting To rewind To play To fast-forward To sto ...
-
Sony RM-AX4000A - page 83
83 Appendix Continued KEY DISPLAY EXIT VOLUME + VOLUME – CHANNEL + CHANNEL – MUTING S.FIELD GENRE MODE T.TONE – CENTER CENTER + – REAR REAR + – SUB_WOOFER SUB_WOOFER + T D.INPUT D.INPUT t FUNCTION To exit the MENU Volume up (RCVR) Volume down (RCVR) Presetting or turning frequency to a higher: + Presetting or turning frequency to a lower: ...
-
Sony RM-AX4000A - page 84
84 T able of preset functions (continued) KEY DISPLAY POWER 1 – 9, 0 +10 ENTER INFO m N M TOP MENU REC * 1 x X DISPLAY . Z * 2 > INPUT T • LIST • t F f g G OK DVD VR (DVR/DVD combo) FUNCTION To turn the power on/off Number buttons: To set items selected on the screen To select numbers 10 and above To enter a setting or to set items selecte ...
-
Sony RM-AX4000A - page 85
85 Appendix Continued KEY DISPLAY POWER 1 – 9, 0 +10 ENTER A/B m N M TOP MENU REC * 1 x X DISPLAY . Z * 2 > INPUT T • SUBTITLE • t F f g G OK MENU EXIT DV D-R (DVD Recorder) FUNCTION To turn the power on/off Number buttons: To set items selected on the screen To select numbers 10 and above To enter a setting or to set items selected on the ...
-
Sony RM-AX4000A - page 86
86 T able of preset functions (continued) KEY DISPLAY POWER 1 – 9, 0, ENTER INFO DISPLAY FAVORITE INPUT F f g G OK EPG MENU EXIT TOOLS VOLUME + VOLUME – CHANNEL + CHANNEL – MUTING RECALL D-CBL (Digital Cable box) FUNCTION To turn the power on/off To change the channel (To change to channel 5, for example, press 0 and 5, or press 5 and ENTER.) ...
-
Sony RM-AX4000A - page 87
87 Appendix Continued KEY DISPLAY POWER 1 – 9, 0 +10 ENTER TUNER m N M TOP MENU REC * x X DISPLAY . BAND > INPUT T • SUBTITLE • t F f g G OK MENU EXIT DA V (DVD/Receiver combo) FUNCTION To turn the power on/off Number buttons: To set items selected on the screen To select numbers 10 and above To enter the setting To select the tuner band T ...
-
Sony RM-AX4000A - page 88
88 T able of preset functions (continued) KEY DISPLAY POWER DISPLAY INPUT WIDE F f g G OK VOLUME + VOLUME – MUTING RESET PJ (Projector) FUNCTION To turn the power on/off To show the current play status on the screen To change the input mode To switch to the WIDE mode To move the cursor upward To move the cursor downward To move the cursor to the ...
-
Sony RM-AX4000A - page 89
89 Appendix Continued KEY DISPLAY POWER 1 – 9, 0 ENTER A/B m N M REC * x X DISPLAY . n > VOLUME + VOLUME – MUTING REC_REV REC_FWD FADER TA PE (Cassette deck) FUNCTION To turn the power on/off To select the track number To enter the setting To select a tape deck: Deck A or B (Dual cassette deck only To rewind To play To fast-forward To record ...
-
Sony RM-AX4000A - page 90
90 KEY DISPLAY POWER 1 – 9, 0 +10 ENTER m N M REC * 1 x X DISPLAY . Z * 2 > CLEAR D.SKIP MD (MD deck) FUNCTION To turn the power on/off To select the track number (0 for the track 10) To select numbers 10 and above To enter the setting To rewind To play To fast-forward To record To stop To pause To show the current play status on the display T ...
-
Sony RM-AX4000A - page 91
91 Appendix KEY DISPLAY OFF 1 2 3 4 5 6 7 8 9 10 11 12 SCENE13 SCENE14 SCENE15 SCENE16 ALL ON ALL OFF ON OFF CHANNEL + CHANNEL – RECALL LIGHT Spacer Raise Lower Toggle Spacer System OFF SCENE1 SCENE2 SCENE3 SCENE4 FULL ON Raise Lower Grafik Eye OFF SCENE1 SCENE2 SCENE3 SCENE4 SCENE5 SCENE6 SCENE7 SCENE8 SCENE9 SCENE10 SCENE11 SCENE12 SCENE13 SCEN ...
-
Sony RM-AX4000A - page 92
92 Full Display 0123456789ABCDEFGHIJKLMNOPQRSTUV 0123456789AB SU PM AM 2 13 5 46 JKL GHI MNO TUV PQRS WXYZ ENTER 12 SYMBOL 2 +100 10 11 SYMBOL 1 ABC DEF 8 0 79 MO TU WE TH FR SA ON OFF POWER LOCK VIDEO 3 T APE SHIFT TV DONE WIDE MD DV D REC D. SKIP CLEAR INPUT SWAP VIDEO 2 AUX BAND FAV ORITE PHONO DISPLA Y MAIN/SUB SUB TITLE 5.1 INPUT LIST 2PIC VID ...
-
Sony RM-AX4000A - page 93
93 Appendix Index A Adjusting the backlight 34 the calibration of the LCD display 39 the clock 1 1, 42 the contrast of the LCD display 40 the volume 27 Air-Slide 29 Alignment 39 Audio component 57 Automatic-off time of the backlight 34 of the LCD display 37 AX Remote Editor installing 16 starting up 19 using Help 20 B Backlight 9, 32, 34 Battery 10 ...
-
Sony RM-AX4000A - page 94
94 Index (continued) E Erasing all the settings (RESET) 68 the learned function from a key or button 49 the macro (programmed series of actions) 54 the T imer macro 64 F Factory settings Air-Slide list 27 Backlight 32 Components list 13 Controlling the volume of visual components 57 Erasing all the settings (Reset) 68 Preset functions of each compo ...
-
Sony RM-AX4000A - page 95
95 Appendix S Setting the automatic-off time of the backlight 34 the automatic-off time of the LCD display 37 the backlight 34 the beep 41 the calibration of the LCD display 39 the clock 1 1, 42 the contrast of the LCD display 40 the names of the labels 65 the preset codes 45 the System Control macro 51 the T imer 59 the volume 27 the volume contro ...
-
Sony RM-AX4000A - page 96
A-C8A-100- 14 (1) ...
Do you have a question concerning Sony RM-AX4000A?
Use the form below
If you did not solve your problem by using a manual Sony RM-AX4000A, ask a question using the form below. If a user had a similar problem with Sony RM-AX4000A it is likely that he will want to share the way to solve it.