Русский dropdown-ico

Инструкция обслуживания Sub-Zero BI-36F

40 страниц 2.29 mb
Скачать

Перейти на страницу of 40

Summary
  • Sub-Zero BI-36F - page 1

    Built-In Refrigeration Design Guide ...

  • Sub-Zero BI-36F - page 2

    Features and specications ar e subject to change at any time without notice. Visit subzero.com/specs for the most up-to-date information. IMPORT ANT NOTE: Throughout this guide, dimensions may vary by ± 1 / 8 " (3) . Dimensions in parentheses ar e millimeters unless otherwise specied. Contents 3 Built-In Refrigeration 4 Design Options 6 ...

  • Sub-Zero BI-36F - page 3

    subzero.com/specs | 3 BUIL T -IN REFRIGERA TION • Ener gy efcient; many models ar e ENERGY ST AR ® qualied. • Advanced water ltration and air purication systems. • NEW! French door models r equires less space for door clearance to accommodate virtually any-size kitchen. • NEW! Internal dispenser models provide ice and chilled w ...

  • Sub-Zero BI-36F - page 4

    4 | Sub-Zero Customer Car e 800.222.7820 Built-In Design Options FRAMED For the classic Sub-Zero look, choose framed custom door panels that contrast with the stainless steel full-length handles and louvered grille (shown). The framed applica- tion is an overlay model with framed design features. Panel, grille and handle options are available. Pane ...

  • Sub-Zero BI-36F - page 5

    subzero.com/specs | 5 Built-In Design Options FLUSH INSET The ush inset design option allows for ush door and grille panels and custom handle hardwar e. Shown with tubular handle option to match W olf built-in ovens. The ush inset application is an overlay model with ush inset panels. Cus- tomize with panel, grille and handle options. P ...

  • Sub-Zero BI-36F - page 6

    6 | Sub-Zero Customer Car e 800.222.7820 Overall Dimensions ALL REFRIGERA TOR / ALL FREEZER Models BI-36R, BI-36RG and BI-36F . BUIL T -IN REFRIGERA TION 36" (914) 84" (2134) 4" (1 02) 73 3 / 4 " (1873) 23 7 / 8 " (606) 37 1 / 4 " (946) 14 1 / 8 " (359) 23 7 / 8 " (606) 2 3 / 8 " (60) HEIGHT DIMENSIONS ? ...

  • Sub-Zero BI-36F - page 7

    subzero.com/specs | 7 BUIL T -IN REFRIGERA TION Overall Dimensions OVER-AND-UNDER Models BI-30U and BI-30UG. 30" (762) 84" (2134) 4" (1 02) 50 3 / 4 " (1289) 23" (584) 23 7 / 8 " (606) 23 5 / 8 " (600) 31 1 / 4 " (796) 12 1 / 8 " (308) 26 3 / 16 " (665) 23 7 / 8 " (606) 2 3 / 8 " (60) HEIG ...

  • Sub-Zero BI-36F - page 8

    8 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Overall Dimensions OVER-AND-UNDER Model BI-36UFD. 36" (914) 84" (2134) 4" (1 02) 50 3 / 4 " (1289) 23" (584) 23 7 / 8 " (606) 23 5 / 8 " (600) 19 1 / 2 " (495) 8" (203) 23 7 / 8 " (606) HEIGHT DIMENSIONS ± 1 / 2 " ( 13) 2 3 / 8 ...

  • Sub-Zero BI-36F - page 9

    subzero.com/specs | 9 BUIL T -IN REFRIGERA TION Model BI-36S. 36" (914) 84" (2134) 4" (1 02) 73 3 / 4 " (1873) 23 7 / 8 " (606) 22 1 / 4 " (565) 7 1 / 4 " (184) 8 3 / 4 " (222) 23 7 / 8 " (606) 2 3 / 8 " (60) HEIGHT DIMENSIONS ± 1 / 2 " ( 13) 26 3 / 16 " (665) Overall Dimensions SIDE-BY - ...

  • Sub-Zero BI-36F - page 10

    10 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Overall Dimensions SIDE-BY -SIDE Model BI-48S, BI-48SID and BI-48SD. 48" (1219) 84" (2134) 4" (1 02) 73 3 / 4 " (1873) 23 7 / 8 " (606) 23 7 / 8 " (606) 30" (762) 11 5 / 8 " (295) 8 3 / 8 " (213) 2 3 / 8 " (60) HEIGHT DIMENSIONS ± ...

  • Sub-Zero BI-36F - page 11

    subzero.com/specs | 11 Specications BUIL T -IN MODELS INTERIOR CAP ACITY ALL REFRIGERA TOR / ALL FREEZER R CU FT (L) F CU FT (L) BI-36R 23.5 (665) BI-36RG 23.4 (663) BI-36F 22.7 (643) OVER-AND-UNDER R CU FT (L) F CU FT (L) BI-30U 13.2 (374) 4.2 (119) BI-30UG 13.1 (371) 4.2 (119) BI-36U 16.4 (464) 5.3 (150) BI-36UG 16.3 (462) 5.3 (150) BI-36UFD 1 ...

  • Sub-Zero BI-36F - page 12

    12 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Opening Dimensions ST ANDARD INST ALLA TION 83 3 / 4 " (2127) OPENING HEIGHT 24" (610) OPENING DEPTH NOTE: Shaded line represents profile of unit. FRONT VIEW SIDE VIEW T OP VIEW W OPENING WIDTH OPENING WIDTH MODEL W BI-36R, BI-36RG, BI-36F 35 1 / 2 " (902) BI-30U, BI ...

  • Sub-Zero BI-36F - page 13

    subzero.com/specs | 13 BUIL T -IN REFRIGERA TION Opening Dimensions FLUSH INSET INST ALLA TION FLUSH INSET WIDTH MODEL W BI-36R, BI-36RG, BI-36F 38" (965) BI-30U, BI-30UG 32" (813) BI-36U, BI-36UG, BI-36UFD, BI-36S 38" (965) BI-42UFD, BI-42S, BI-42SID, BI-42SD 44" (1118) BI-48S, BI-48SID, BI-48SD 50" (1270) Dimensions assum ...

  • Sub-Zero BI-36F - page 14

    14 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Opening Dimensions DUAL ST ANDARD INST ALLA TION 83 3 / 4 " (2127) OPENING HEIGHT 24" (610) OPENING DEPTH NOTE: Shaded line represents profile of unit. FRONT VIEW SIDE VIEW TO P VIEW W OPENING WIDTH OPENING WIDTH MODELS W T wo 30" Models 59 3 / 4 " (1518) 30&quo ...

  • Sub-Zero BI-36F - page 15

    subzero.com/specs | 15 BUIL T -IN REFRIGERA TION Opening Dimensions DUAL FLUSH INSET INST ALLA TION 84" (2134) FLUSH INSET HEIGHT 1 / 4 " (6) 26 3 / 16 " (665) FLUSH INSET DEPTH 2 3 / 16 " (56) *3 " (76) typical depth. Shaded areas will be visible and should be finished to match cabinetr y. NOTE: Shaded line represents prof ...

  • Sub-Zero BI-36F - page 16

    16 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Plumbing The water supply line should be located within the shaded area shown in the illustration below . The water supply line should be connected to the house supply with an easily accessible shut-off valve. Do not use self-pier cing valves. The water supply line must not interfe ...

  • Sub-Zero BI-36F - page 17

    subzero.com/specs | 17 FRAMED P ANELS The framed application is an overlay model with framed design features. It is not a separate model. If the custom panel is thinner than 1 / 4 " (6) , a ller material must be added to achieve a proper t. If the panel is thicker than 1 / 4 " (6) , rout an edge ar ound the panel or mount the custom ...

  • Sub-Zero BI-36F - page 18

    18 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION P ANEL MOUNTING KIT A Sub-Zero custom panel mounting kit eliminates the need for a backer and spacer panel and is avail able through an authorized Sub-Zero dealer . For local dealer information, visit the nd a showroom section of our website, subzer o.com. The kit consists of mo ...

  • Sub-Zero BI-36F - page 19

    subzero.com/specs | 19 BUIL T -IN REFRIGERA TION Custom Panels FLUSH INSET P ANELS The ush inset application is an overlay model with ush inset panels. It is not a separate model. The ush inset design allows custom panels to be installed ush with adjacent cabinets. Similar to overlay , ush inset panels are typically cr eated by combi ...

  • Sub-Zero BI-36F - page 20

    20 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION MODEL BI-36U, BI-36UG REFRIGERA TOR W H Door Panel 35 3 / 4 " (908) 49 15 / 16 " (1268) FREEZER W H Drawer Panel 35 3 / 4 " (908) 18 11 / 16 " (475) GRILLE (OPTIONAL) W H Grille Panel 35 3 / 4 " (908) 8 15 / 16 " (227) BI-36UG A Stiles / Rails 5 3 / 16 ...

  • Sub-Zero BI-36F - page 21

    subzero.com/specs | 21 BUIL T -IN REFRIGERA TION Framed Panel Dimensions MODEL BI-36S REFRIGERA TOR W H Door Panel 19 13 / 16 " (503) 69 9 / 16 " (1767) FREEZER W H Door Panel 15 7 / 16 " (392) 69 9 / 16 " (1767) GRILLE (OPTIONAL) W H Grille Panel 35 3 / 4 " (908) 8 15 / 16 " (227) MODEL BI-42S, BI-42SID, BI-42SD REFRI ...

  • Sub-Zero BI-36F - page 22

    22 | Sub-Zero Customer Car e 800.222.7820 Overlay Panel Dimensions MODEL BI-36R, BI-36RG, BI-36F REFRIGERA TOR / FREEZER W H Overlay Panel 36" (914) 69 3 / 4 " (1772) Spacer Panel 35 1 / 8 " (892) 68 15 / 16 " (1751) Backer Panel 35 3 / 4 " (908) 69 9 / 16 " (1767) GRILLE W H Overlay Panel 36" (914) 9 1 / 4 " ...

  • Sub-Zero BI-36F - page 23

    subzero.com/specs | 23 Overlay Panel Dimensions BUIL T -IN REFRIGERA TION H H H W A A A A H H W H H W H H W A A A B H H H W H W H H W W B A H H W W W H H H W A A A A H H W H H W H H W A A A B H H H W H W H H W W B A H H W W W BI-36S / BI-42S / BI-42SID BI-48S / BI-48SID BI-42SD / BI-48SD MODEL BI-42UFD REFRIGERA TOR (2 P ANELS) W H Overlay Panels 2 ...

  • Sub-Zero BI-36F - page 24

    24 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Flush Inset Panel Dimensions MODEL BI-36R, BI-36RG, BI-36F REFRIGERA TOR / FREEZER W H Flush Inset Panel 37" (940) 69 3 / 4 " (1772) Spacer Panel 35 1 / 8 " (892) 68 15 / 16 " (1751) Backer Panel 35 3 / 4 " (908) 69 9 / 16 " (1767) GRILLE W H Flush Ins ...

  • Sub-Zero BI-36F - page 25

    subzero.com/specs | 25 BUIL T -IN REFRIGERA TION Flush Inset Panel Dimensions MODEL BI-42UFD REFRIGERA TOR (2 P ANELS) W H Flush Inset Panels 21 3 / 8 " (543) 50 1 / 8 " (1273) Spacer Panels 20" (508) 49 5 / 16 " (1253) Backer Panels 20 5 / 8 " (524) 49 15 / 16 " (1268) FREEZER W H Flush Inset Panel 43" (1092) 19& ...

  • Sub-Zero BI-36F - page 26

    26 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Flush Inset Panels P ANEL OFFSETS The illustrations provide panel of fsets and reveals for built-in models in a ush inset application. Refer to the chart below for refer ence to the illustrations. P ANEL OFFSET ALL REFRIGERA TOR / ALL FREEZER ILLUS Door / Grille Sides A Grille T ...

  • Sub-Zero BI-36F - page 27

    subzero.com/specs | 27 BUIL T -IN REFRIGERA TION Dual Installation If two units are installed side by side, a dual installation kit may be requir ed. Installations without a custom ller strip requir e a dual installation kit. If a dual installation kit is not specied, a 2" (51) ller strip is recommended between units. A custom ller ...

  • Sub-Zero BI-36F - page 28

    28 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Dual Flush Inset Panel Dimensions MODEL BI-36R, BI-36RG, BI-36F REFRIGERA TOR / FREEZER W H Flush Inset Panel 36 1 / 2 " (927) 69 3 / 4 " (1772) Spacer Panel 35 1 / 8 " (892) 68 15 / 16 " (1751) Backer Panel 35 3 / 4 " (908) 69 9 / 16 " (1767) GRILLE W ...

  • Sub-Zero BI-36F - page 29

    subzero.com/specs | 29 BUIL T -IN REFRIGERA TION Dual Installation DUAL FLUSH INSET P ANEL OFFSETS The illustrations provide panel of fsets and reveals for built-in models in a dual ush inset application. Refer to the chart below for refer ence to the illustrations. P ANEL OFFSET ALL REFRIGERA TOR / ALL FREEZER ILLUS Door (hinge) / Grille Sides ...

  • Sub-Zero BI-36F - page 30

    30 | Sub-Zero Customer Car e 800.222.7820 Dual Installation DUAL WIDE GRILLE A dual wide grille spans the entire width of both units in a dual installation and is a part of a dual installation kit. For overlay and ush inset panel dimensions for the dual wide grille, refer to the charts below . Dimensions listed are for a standard 84" (2134) ...

  • Sub-Zero BI-36F - page 31

    subzero.com/specs | 31 Side Panel The custom side panels must be a minimum of 24" (610) deep and 1 / 2 " (13) thick. Routing will be necessary for the side panel to t ush against the side of the unit. Refer to the illustrations below . When installing a built-in unit with a custom side panel, an accessory kit is requir ed. Stainless ...

  • Sub-Zero BI-36F - page 32

    32 | Sub-Zero Customer Car e 800.222.7820 Framed Panels FULL-SCALE TEMPLA TE BUIL T -IN REFRIGERA TION OPTIONAL EXTENDED FULL-LENGTH HANDLE ST ANDARD FULL-LENGTH HANDLE 1 / 4 " (6) FRAMED P ANEL DOOR 1" (25) 3" (76) 1 1 / 4 " (32) P ANEL 1" (25) P ANEL 1 / 2 " (13) P ANEL 3 / 4 " (19) P ANEL 2" (51) Framed pa ...

  • Sub-Zero BI-36F - page 33

    subzero.com/specs | 33 Overlay and Flush Inset Panels FULL-SCALE TEMPLA TE Overlay and ush inset panels must be a minimum of 5 / 8 " (16) thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door . BUIL T -IN REFRIGERA TION Overlay and ush inset pane ...

  • Sub-Zero BI-36F - page 34

    34 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION 23 7 / 8 " (606) TO REAR OF UNIT O VERALL WIDTH OF UNIT 1 1 / 4 " (32) 1 1 / 2 " (38) 1 3 / 4 " (44) 0" (0) 1" (25) 2" (51) 2 1 / 4 " (57) 2 1 / 2 " (63) 2 3 / 4 " (70) 3" (76) 3 1 / 4 " (83) 3 1 / 2 " (89) 1 / 4 &quo ...

  • Sub-Zero BI-36F - page 35

    subzero.com/specs | 35 BUIL T -IN REFRIGERA TION 1 1 / 4 " (32) ASSUMES 3 / 4 " (19) FLUSH INSET P ANEL THICKNESS 2 3 / 16 " (56) 24" (610) TO BA CK W ALL 3 / 4 " (19) THICK FLUSH INSET P ANEL (TYPICAL) 1 / 4 " (6) BACKER P ANEL 1" (25) THICK P ANEL 1" (25) 0" SCALE 110° door opening (top view). Flush I ...

  • Sub-Zero BI-36F - page 36

    36 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION 1 1 / 4 " (32) FILLER STRIP APPR OX PR OFILE OF ST AINLESS STEEL WRAPPED DOOR AND HANDLE DOOR OPEN 110° DOOR CLOSED Dual standard installation (top view). Dual Standard Installation FULL-SCALE TEMPLA TE T ypical framed, overlay or stainless steel dual installation with lle ...

  • Sub-Zero BI-36F - page 37

    subzero.com/specs | 37 BUIL T -IN REFRIGERA TION 1 1 / 2 " (38) 1 / 2 " (13) FILLER STRIP PROFILE OF 3 / 4 " (19) FLUSH INSET P ANEL AND TUBULAR HANDLE DOOR CLOSED DOOR OPEN 110° Dual ush inset installation (top view). Dual Flush Inset Installation FULL-SCALE TEMPLA TE T ypical ush inset dual installation with ller strip at ...

  • Sub-Zero BI-36F - page 38

    Sub-Zero Residential Limited Warranty FOR RESIDENTIAL USE FULL TWO YEAR WARRANTY* For two years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defec- tive in materials or workmanship. All service provided ...

  • Sub-Zero BI-36F - page 39

    Sub-Zero, Sub-Zero & Design, Dual Refrigeration, The Living Kitchen, Gr eat American Kitchens The Fine Art of Kitchen Design, and Ingredients are r egistered trademarks and service marks of Sub-Zero, Inc. Wolf, W olf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs ar e register ed trademarks and service marks of ...

  • Sub-Zero BI-36F - page 40

    SUB-ZERO, INC. P.O. BOX 44848 MADISON, WI 53744 SUBZERO.COM 800.222.7820 SZBIDG 1/ 201 4 ...

Производитель Sub-Zero Категория Refrigerator

Документы, которые мы получаем от производителя устройства Sub-Zero BI-36F мы можем разделить на несколько групп. Это в частности:
- технические чертежи Sub-Zero
- инструкции обслуживания BI-36F
- паспорта изделия Sub-Zero
- информационные брошюры
- энергетические этикетки Sub-Zero BI-36F
Все из них важны, однако самую важную информацию с точки зрения пользователя мы найдем в инструкции обслуживания Sub-Zero BI-36F.

Группа документов, определяемая как инструкции обслуживания, делится также на более подробные типы, такие как: Инструкции монтажа Sub-Zero BI-36F, инструкции обслуживания, короткие инструкции или инструкции пользователя Sub-Zero BI-36F. В зависимости от потребностей, Вам необходимо поискать требуемый документ. На нашем сайте Вы можете просмотреть самую популярную инструкцию использования изделия Sub-Zero BI-36F.

Похожие инструкции обслуживания

Полная инструкция обслуживания устройства Sub-Zero BI-36F, как должна выглядеть?
Инструкция обслуживания, определяемая также как пособие пользователя, или просто "руководство" - это технический документ, цель которого заключается в использовании Sub-Zero BI-36F пользователями. Инструкции пишет, как правило технический писатель, языком, доступным для всех пользователей Sub-Zero BI-36F.

Полная инструкция обслуживания Sub-Zero, должна заключать несколько основных элементов. Часть из них менее важная, как например: обложка / титульный лист или авторские страницы. Однако остальная часть, должна дать нам важную с точки зрения пользователя информацию.

1. Вступление и рекомендации, как пользоваться инструкцией Sub-Zero BI-36F - В начале каждой инструкции, необходимо найти указания, как пользоваться данным пособием. Здесь должна находится информация, касающаяся местонахождения содержания Sub-Zero BI-36F, FAQ и самых распространенных проблем - то есть мест, которые чаще всего ищут пользователи в каждой инструкции обслуживания
2. Содержание - индекс всех советов, касающихся Sub-Zero BI-36F, которое найдем в данном документе
3. Советы по использованию основных функций устройства Sub-Zero BI-36F - которые должны облегчить нам первые шаги во время использования Sub-Zero BI-36F
4. Troubleshooting - систематизированный ряд действия, который поможет нам диагностировать а в дальнейшем очередность решения важнейших проблем Sub-Zero BI-36F
5. FAQ - чаще всего задаваемые вопросы
6. Контактные данные Информация о том, где искать контактные данные производителя / сервисного центра Sub-Zero BI-36F в данной стране, если самостоятельно не получится решить проблему.

У вас вопрос, касающийся Sub-Zero BI-36F?

Воспользуйтесь формуляром, находящимся ниже

Если с помощью найденной инструкции Вы не решили свою проблему с Sub-Zero BI-36F, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Sub-Zero BI-36F со всей вероятностью он захочет поделиться методом ее решения.

Перепишите текст с картинки

Captcha
Новая картинка

Комментарии (0)