Инструкция обслуживания Tascam 414MKII

36 страниц 1.18 mb
Скачать

Перейти на страницу of 36

Summary
  • Tascam 414MKII - page 1

    » 41 4 @ # O WNER'S MANU AL 3D0028100A ...

  • Tascam 414MKII - page 2

    2 T able Of Contents Safety Instructions 3 The PORT ASTUDIO 414 MKII is... 4 The Recording System 5 The Three Steps to Multitrack 5 Understanding the Mixer 6-7 Signal Flow in the 414 MKII Mix er 6 T ape Cue Monitor System 7 Multitrack Cassette Recor der 8 T rac k Format and T ape Recommendations 8-9 Optional Accessories 10 PORT ASTUDIO 414 MKII Bri ...

  • Tascam 414MKII - page 3

    3 Safety Instructions CA UTION: • Read all of these Instructions. • Save these Instructions f or later use. • Follow all W arnings and Instructions marked on the audio equipment. 1) Read Instructions — All the safety and operating instructions should be read before the product is operated. 2) Retain Instructions — The safety and operating ...

  • Tascam 414MKII - page 4

    4 The POR T ASTUDIO 414 MKII is... The POR T ASTUDIO 414 MKII is a 4-track "Multi- track Master" cassette tape recorder and a full- function mixer with 8 inputs/stereo outputs including a balanced microphone input and a dedicated guitar input combined into a single workstation. Its high audio quality and creative flexibility reflect the e ...

  • Tascam 414MKII - page 5

    5 The Recor ding System The POR T ASTUDIO 414 MKII is a complete audio production facility in a single box. It is divided into two major sections: a full-function mixer and a 4- channel, multitrack cassette recorder . T o complete the recording system, you'll additionally need these: input devices (microphones, instruments), output devices (he ...

  • Tascam 414MKII - page 6

    6 Understanding the Mix er Signal Flow in the 414 MKII Mix er The illustration below shows how input signals pass through the 414 MKII Mixer section. After the MASTER fader they go to the L/R LINE OUT jacks. This is the most important signal route in the mixer and is called "Main Mix". ...

  • Tascam 414MKII - page 7

    7 Understanding the Mix er T ape Cue Monitor System The T APE CUE mix and MONITOR switches are also crucial for successful multitrack recording, because they control what you hear in the headphones. This CUE mix is totally independent from the Main Mix going to tape. If you don't use the CUE mix, you run the risk of accidentally "bouncing ...

  • Tascam 414MKII - page 8

    8 Multitrac k Cassette Recor der The 414 MKII records on readily available standard (Philips) Compact Cassette tape, high bias T ype II. The recorder has 4 tracks while the mixer has a stereo output; however , using the Direct Recording feature you can record on any or all of the 4 tracks at one time. For more details, see "Recording on More T ...

  • Tascam 414MKII - page 9

    9 T rac k Format and T ape Recommendations T ape T ype The Portastudio 414 MKII is internally adjusted for HIGH BIAS T ype II tape. This means that for best results, you should only use tapes of this type. TDK SA, Maxell XL-II or equivalent formulations are recommended. W e strongly suggest that you select one good quality brand and use it exclusiv ...

  • Tascam 414MKII - page 10

    10 Optional Accessories RC-30P Remote Footswitc h Head Demagnetizer TZ-261 Cleaning Kit (Except U .S.) MIDI-T ape Synchronizer PW -2Y/PW-4Y Insertion Cable HC-1 Head Cleaner & RC-1 Rubber Cleaner (U .S.only) ...

  • Tascam 414MKII - page 11

    12 11 POR T ASTUDIO 414 MKII Brief Guide For detailed inf or mation on each feature , see "Features and Controls", pp . 31-35. ✂ Channels 1 thr ough 4 EQ HIGH : Cuts or boosts treb le frequencies. Shelving point is at 10 kHz. EQ LO W : Cuts or boosts bass frequencies. Shelving point is at 100 Hz. EFFECT 1 and 2 : These control how m uch ...

  • Tascam 414MKII - page 12

    13 14 POR T ASTUDIO 414 MKII Brief Guide DBX switch : Nor mally , leav e this switch at ON. When you use track 4 to record and pla y bac k MIDI sync tones or time code, set to SYNC then the dbx is on f or tracks 1-3, and off on trac k 4. T ape counter : Shows the distance the tape has mov ed from a zero ref erence point. Counter reset button : Pres ...

  • Tascam 414MKII - page 13

    15 Let's T ry the 414 MKII Mixer T o learn how the mixer works, we ’ ll use a microphone as the source. If your dynamic microphone cable has a balanced XLR-type connector , we ’ ll use the rear-panel XLR-type INPUT (L, R) connector . If it is fitted with an unbalanced 1/4" connector , we ’ ll use the front-panel MIC/LINE IN jack. If ...

  • Tascam 414MKII - page 14

    16 Step-By-Step-Operation Guide 9 Monitor selection Press the MONITOR "L-R" switch on. 10 Monitor level T urn the MONITOR level control up to the 12 o'clock position. 11 TRIM adjustment While speaking into the microphone, slowly push the TRIM control in channel 1. Y ou will hear your voice on the left side in the headphones. When usi ...

  • Tascam 414MKII - page 15

    17 Step-By-Step-Operation Guide 6 Mic level adjustment Speak into the microphone. Y ou will see meter 1 move. Slowly push the channel 1 TRIM control until the meter peaks at no more than "+6". 7 Beginning recording Hold RECORD and press PLA Y to initiate recording. The REC indicator that was blinking will turn on solid, indicating the tra ...

  • Tascam 414MKII - page 16

    18 Step-By-Step-Operation Guide 6 Routing tape signals to T APE CUE Locate the EFFECT 2/T APE CUE level control on channel 1 and slowly turn it to the right. Y ou'll hear, in center mono, what you have recorded on track 1. 7 Stopping playback Press STOP to stop playing. ‘ How to Make an Over dub on T rack 2 Overdubbing entails recording one ...

  • Tascam 414MKII - page 17

    19 Step-By-Step-Operation Guide 6 Locating tape to zero Making sure that the ZERO RETURN switch is ON, press REW and the tape will rewind to the beginning of the track 1 recording. 7 T rack selection Set the RECORD FUNCTION switch for track 2 to its R position. The track's REC indicator will start blinking. 8 Record level adjustment (TRIM) Spe ...

  • Tascam 414MKII - page 18

    20 Step-By-Step-Operation Guide How to Recor d T racks 3 and 4 T racks 3 and 4 can be recorded using almost the same procedure just shown for tracks 1 and 2. Just use the applicable RECORD FUNCTION switches, and the P AN controls should be rotated to the LEFT for recording on T rack 3 and to the RIGHT for T rack 4. How to Recor d Many Sour ces onto ...

  • Tascam 414MKII - page 19

    21 Step-By-Step-Operation Guide How to Recor d a Mix onto T wo T racks Sim ultaneously If you want to record multiple sources onto two tracks, you use the channel P AN controls to send them to LEFT or RIGHT (or anywhere in between, if you're making a stereo mix). The track RECORD FUNCTION switches choose what track the Left and Right mixes wil ...

  • Tascam 414MKII - page 20

    22 Step-By-Step-Operation Guide Recording on More than T wo T racks Simultaneousl y : Direct Recording It is possible to record on three or four tracks at the same time by setting the respective RECORD FUNCTION switches to their numbered (1-4) position. In this Direct recording, each track gets its signal from a single mixer channel only — track ...

  • Tascam 414MKII - page 21

    23 Step-By-Step-Operation Guide 5 Playback level Press PLA Y and, while listening to the tape play , tentatively set the channel faders. 6 Adjust the P AN controls to set each track's left-to- right position for the desired stereo image. Y ou may also want to use the EQ controls to adjust the individual tracks for the desired tonality . (For u ...

  • Tascam 414MKII - page 22

    24 PUNCH-IN or INSER T Recor ding "Punching in" or "insert recording" is recording over a small section of previously recorded track to correct or improve a performance, while keeping the rest of the track intact. The mixer settings should be exactly the same as they were during the original recording. In the following, we' ...

  • Tascam 414MKII - page 23

    25 PUNCH-IN or INSER T Recor ding Punch-in Pr ocedure There are 2 ways to initiate the punch-in recording. The first is with the transport RECORD button, and the second is with the optional footswitch. Perform the "Preliminary" on the previous page, if you haven't yet done so. Punching-in/out with RECORD 1 Check to see that the track ...

  • Tascam 414MKII - page 24

    26 Bouncing T rac ks (Ping-P ong) The recording capability of the POR T ASTUDIO 414 MKII is not limited to four tracks. Y ou can "bounce" or combine tracks you have recorded to an empty track, and then replace the original tracks with new material. A bounce is like a mixdown, except you are recording to one of the tracks of the 414 MKII i ...

  • Tascam 414MKII - page 25

    27 Using Effects with the POR T ASTUDIO 414 MKII Effects and signal processing are areas where you can really start to have fun customizing your sound, and develop your own unique recording style. Because there are so many possibilities, it also can be confusing. There are many dif ferent ef fect units on the market, all with different controls, ty ...

  • Tascam 414MKII - page 26

    28 Using Effects with the POR T ASTUDIO 414 MKII Setting the Mix/Balance Control on Effect De vices When it's being used in a send-return mix, set the mix/balance of your effect device all the way to "wet" or full processing with no direct original signal. In send/receive processing, the dry signal goes down the 414 MKII's chann ...

  • Tascam 414MKII - page 27

    30 29 Syncing MIDI-T ape — Using the T ASCAM MTS-30 T r oubleshooting Prob lem P ossible Cause Pla yback sounds dull Dir ty heads Pla yback le vel is too low Dir ty heads T ranspor t ke ys not eff ective P ow er turned off, or tape not loaded No recording RECORD FUNCTION set to SAFE, or cassette tab broken Wrong trac ks recorded P AN improperly s ...

  • Tascam 414MKII - page 28

    31 32 Features and Contr ols 414 MKII MIXER 1. PO WER switch (on the rear panel): Turns the 414 MKII on and off. 2. DC IN 12 V connector (on the rear panel): This is for connection of the provided T ASCAM PS-P414 AC adaptor only . 3. MIC/LINE IN jacks (Channels 1-4): These 1/4" jacks accept unbalanced signals ranging from – 50 dBV (3 mV) to ...

  • Tascam 414MKII - page 29

    33 Features and Contr ols 14. Channel faders: These linear controls vary the level feeding the Master section. The nominal setting position is between 7 and 8 (shaded area). 15. STEREO INPUTS (Ch.5-6/7-8): Connect the outputs of your effects devices to these 1/4" jacks. These jacks can also be used as additional line inputs. Nominal input leve ...

  • Tascam 414MKII - page 30

    34 Features and Contr ols 414 MKII RECORDER 27. Cassette compar tment door: T o insert or remove a cassette, pull the door open. Once a cassette is inserted, be sure to close the door to prevent objects, dust or liquids from falling into the tape path. T ape path components 28. DBX switch : When this switch is set to its ON position, the built-in d ...

  • Tascam 414MKII - page 31

    35 Features and Contr ols Care and Maintenance 38. REMOTE PUNCH IN/OUT jac k (on the front panel): For connection to an optional RC-30P remote footswitch. 39. RECORD FUNCTION switches 1-4: These switches put the respective tracks into Record Ready . Recording starts when RECORD is pressed together with PLA Y . In the center position (SAFE) no recor ...

  • Tascam 414MKII - page 32

    36 Care and Maintenance How the dbx W orks Cleaning the Pinch Roller Clean the pinch roller at least once each day the deck is used. Use a good rubber cleaner . 1. Clean the pinch roller with a cotton swab moistened with rubber cleaner , until there is no visible residue on the pinch roller . 2. Using a clean cotton swab, wipe off all excess rubber ...

  • Tascam 414MKII - page 33

    38 37 Specifications MECHANICAL CHARA CTERISTICS T ape: Compact Cassette (C-60 to 90), High-Bias (CrO2) T rack Format: 4-track/4-channel Head Configuration: 4-channel record/pla y (permalloy) x 1 4-channel erase (f err ite) x 1 Motor: DC ser vo motor x 1 T ape Speed: 9.5 cm/sec. (3-3/4 ips) Pitch Contr ol: ± 10 % (appro x.) W ow and Flutter: 0.2% ...

  • Tascam 414MKII - page 34

    39 40 Bloc k Diagram LINE OUT (-10dBV) L R MONITOR (-10dBV) (-10dBV) EFFECT 1 SEND EFFECT 2 SEND /TAPE CUE OUT ATT PHONES (60mW+60mW) MONITOR OUT (-10dBV) L/R EFFECT 1 L SAFE SAFE SAFE SAFE 1 R 2 L TRK1 TRK2 EFFECTF 2 /TAPE CUE L R LED METER 3 R 4 TRK3 TRK4 RECORD FUNCTION 4TRK 4CH R/P AMP DBX TYPE 2 NR TRK1 TRK2 TRK3 TRK4 TAPE1 TAPE2 TAPE3 TAPE4 D ...

  • Tascam 414MKII - page 35

    41 Level Dia gram 1 2 10 9 3 7 8 4 5 6 TRK 2 TRK 3 TRK 4 TRK 1 REPRO EQ AMP REC/REPRO HEAD REC REPRO REC EQ AMP BIAS ADJ. ERASE HEAD TRAP BIAS AMP REC MUTE REC LEVEL 85kHz OSC ENC OUT IN DEC OUT PLAY MUTE dbx NR REPRO LEVEL EQ LPF REC IN TAPE OUT REC IN TAPE OUT REC IN TAPE OUT REC IN TAPE OUT 5 ( dBV ) 0 dBV = 1.0 Vrms +10 0 – 10 – 20 – 30 ? ...

  • Tascam 414MKII - page 36

    TEA C CORPORA TION Phone: (0422) 52-5082 3-7-3, Nakacho , Musashino-shi, T okyo 180-8550, Japan TEA C AMERICA, INC . Phone: (323) 726-0303 7733 T elegraph Road, Montebello , California 90640 TEA C CANAD A L TD . Phone: 905-890-8008 Facsimile: 905-890-9888 5939 W allace Street, Mississauga, Ontario L4Z 1Z8, Canada TEA C MEXICO , S.A. De C.V Phone: 5 ...

Производитель Tascam Категория Microcassette Recorder

Документы, которые мы получаем от производителя устройства Tascam 414MKII мы можем разделить на несколько групп. Это в частности:
- технические чертежи Tascam
- инструкции обслуживания 414MKII
- паспорта изделия Tascam
- информационные брошюры
- энергетические этикетки Tascam 414MKII
Все из них важны, однако самую важную информацию с точки зрения пользователя мы найдем в инструкции обслуживания Tascam 414MKII.

Группа документов, определяемая как инструкции обслуживания, делится также на более подробные типы, такие как: Инструкции монтажа Tascam 414MKII, инструкции обслуживания, короткие инструкции или инструкции пользователя Tascam 414MKII. В зависимости от потребностей, Вам необходимо поискать требуемый документ. На нашем сайте Вы можете просмотреть самую популярную инструкцию использования изделия Tascam 414MKII.

Похожие инструкции обслуживания

Полная инструкция обслуживания устройства Tascam 414MKII, как должна выглядеть?
Инструкция обслуживания, определяемая также как пособие пользователя, или просто "руководство" - это технический документ, цель которого заключается в использовании Tascam 414MKII пользователями. Инструкции пишет, как правило технический писатель, языком, доступным для всех пользователей Tascam 414MKII.

Полная инструкция обслуживания Tascam, должна заключать несколько основных элементов. Часть из них менее важная, как например: обложка / титульный лист или авторские страницы. Однако остальная часть, должна дать нам важную с точки зрения пользователя информацию.

1. Вступление и рекомендации, как пользоваться инструкцией Tascam 414MKII - В начале каждой инструкции, необходимо найти указания, как пользоваться данным пособием. Здесь должна находится информация, касающаяся местонахождения содержания Tascam 414MKII, FAQ и самых распространенных проблем - то есть мест, которые чаще всего ищут пользователи в каждой инструкции обслуживания
2. Содержание - индекс всех советов, касающихся Tascam 414MKII, которое найдем в данном документе
3. Советы по использованию основных функций устройства Tascam 414MKII - которые должны облегчить нам первые шаги во время использования Tascam 414MKII
4. Troubleshooting - систематизированный ряд действия, который поможет нам диагностировать а в дальнейшем очередность решения важнейших проблем Tascam 414MKII
5. FAQ - чаще всего задаваемые вопросы
6. Контактные данные Информация о том, где искать контактные данные производителя / сервисного центра Tascam 414MKII в данной стране, если самостоятельно не получится решить проблему.

У вас вопрос, касающийся Tascam 414MKII?

Воспользуйтесь формуляром, находящимся ниже

Если с помощью найденной инструкции Вы не решили свою проблему с Tascam 414MKII, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Tascam 414MKII со всей вероятностью он захочет поделиться методом ее решения.

Перепишите текст с картинки

Комментарии (0)