-
Grizzly G6772 - page 1
COPYRIGHT © MAY, 2002 BY GRIZZLY INDUSTRIAL, INC. 1821 VALENCIA ST., BELLINGHAM, WA 98227 WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. PRINTED IN TAIWAN 16 GAUGE STAPLER KIT MODEL G6044/G6772 INSTRUCTION MANUAL Model G6772 shown here ...
-
Grizzly G6772 - page 2
For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Indicates a potentially hazardous situation which, if not a ...
-
Grizzly G6772 - page 3
G6044/G6077 16 Gauge Stapler Kit -2 - 10. USE PROPER AIR HOSE for the tool. Make sure your air hose is in good condition and is long enough to reach your work without stretching. 11. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neck- ties, rings, bracelets, or other jewel- ry which may get caught in moving parts. Non-slip footwear is re ...
-
Grizzly G6772 - page 4
G6044/G6772 16 Gauge Stapler Kit -3 - Operating this stapler can propel objects into the air, causing immedi- ate eye damage. To protect yourself, always wear American National Standards Institute (ANSI) approved safety glasses or goggles when oper- ating this equipment. In addition, this stapler discharges at 85-90 decibels. To protect your hearin ...
-
Grizzly G6772 - page 5
G6044/G6772 16 Gauge Stapler Kit -4 - INTRODUCTION Commentary Most important, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below. Grizzly Industrial, Inc. 1203 Lycoming Mall Circle Pennsdale, PA 17756 Phone: (570) 546-9663 Fax: (800) 438-5901 E-Mail: techsupport@grizz ...
-
Grizzly G6772 - page 6
G6044/G6772 16 Gauge Stapler Kit -5 - Compressed Air System Safety Yoke Mechanism The safety yoke is a mechanical device that can fail. Never rely on the safety yoke mechanism as an excuse to point the stapler at yourself or any bystanders. Serious injury may occur. Exceeding the maximum permissible operating pressure may cause the sta- pler to exp ...
-
Grizzly G6772 - page 7
G6044/G6772 16 Gauge Stapler Kit -6 - OPERATION Loading Stapler Single/Bump Fire Mode To load your stapler: 1. Disconnect the air supply from the stapler! 2. Pull the magazine pusher (shown in Figure 1 ) all the way to the back of the magazine until is snaps in place. The Model G6044/G6772 is equipped with a single/bump fire trigger. To select sing ...
-
Grizzly G6772 - page 8
G6044/G6772 16 Gauge Stapler Kit -7 - Operating Stapler If you have not read the safety instruc- tions in this manual, do not operate the stapler. Before the first operation, and periodically after that, place one drop of the included oil into the quick connect fitting where the sta- pler connects to the air supply. After oiling, wipe off any exces ...
-
Grizzly G6772 - page 9
G6044/G6772 16 Gauge Stapler Kit -8 - Figure 5. Removing guide cover. Quick Release Latch Driver Guide Cover Always disconnect air from stapler whenever clearing a jammed staple! Clearing Jammed Staples The most frequent situation that may occur with any type of stapler is a staple jam. A jammed staple must be cleared before using the stapler again ...
-
Grizzly G6772 - page 10
G6044/G6772 16 Gauge Stapler Kit -9 - Cleaning Stapler Use a good solvent to clean the nose assembly of the stapler. Always be sure that the stapler is dry before using it again. Do not allow dust, chips, sand, etc. into the air connectors or into the body of the sta- pler; this may result in leaks and damage to the stapler and the air couplings. N ...
-
Grizzly G6772 - page 11
G6044/G6772 16 Gauge Stapler Kit -10 - Replacing Pistons/O-Rings If you use your stapler day in and day out, Grizzly offers repair pistons as cheap insurance against wasted down time and lost profits in the event that a piston or pis- ton shaft becomes worn out. To replace a piston: Figure 7. Removing stapler exhaust cap. 8. With a long flathead sc ...
-
Grizzly G6772 - page 12
G6044/G6772 16 Gauge Stapler Kit -11 - MAINTENANCE NOTES ...
-
Grizzly G6772 - page 13
G6044/G6772 16 Gauge Stapler Kit -12 - G6044 PART BREAKDOWN 48A 50A 51A 27 5 29A 25 84 66A 59A 69 26 65A 64 63 88 61 67A 62 45B 28A 86 71 70 77 1 75A 72 39 44 47 42 83 43 41 46 40 38 37 36 23 24 22-1 22A 20A 19 18 16A 57 90 26-1 14 13 12 11 10 9 8 6 5A 2 3 1 12-1 60A 68 74A 77 33 69 31 32A 15 21 74 80A 55 B 54 78 53A 80-1 60A ...
-
Grizzly G6772 - page 14
G6044/G6772 16 Gauge Stapler Kit -13 - 01 P6044001 LOCK NUT 02 P6044002 EXHAUST COVER 03 P6044003 SPRING PLATE 05A P6044005A CAP SCREW 06 P6044006 CAP 08 P6044008 SPACER 09 P6044009 PISTON STOPPER 10 P6044010 SPRING 11 P6044011 O-RING 12 P6044012 PISTON HEAD VALVE 12-1 P6044012-1 SPACER 13 P6044013 O-RING 14 P6044014 SEAL 15 P6044015 O-RING 16A P60 ...
-
Grizzly G6772 - page 15
G6044/G6772 16 Gauge Stapler Kit -14 - G6772 PART BREAKDOWN 48A 50A 51A 78 87 53A 27 52A 5 29A 25 84 26 66A 59 55 69 26-1 65A 64 63 88 61 67 62 28A 86 71 70 77 35A 75A 72 39 44 47 42 83 43 41 46 40 54 57 90 80A 38 37 36 60A 45B 14 13 12 11 10 9 8 6 5A 2A 4 1A 77 12-1 23 24 22-2 22A 20 19 18 16A 60 68 74A 77A 33 69 31 32A 15A 21 ...
-
Grizzly G6772 - page 16
G6044/G6772 16 Gauge Stapler Kit -15 - 01A P6772001A BUTTON HD CAP SCR 02A P6772002A EXHAUST COVER 04 P6772004 PU WASHER 05A P6044005A CAP SCREW + SW 06 P6772006 CAP 08 P6772008 SPACER 09 P6772009 PISTON STOPPER 10 P6772010 SPRING 11 P6772011 O-RING 12 P6772012 PISTON HEAD VALVE 12-1 P6044012-1 SPACER 13 P6772013 O-RING 14 P6772014 SEAL 15A P604401 ...
-
Grizzly G6772 - page 17
TROUBLESHOOTING Air leaking at trigger valve area. Air leaking between hous- ing and hose. Air leaking between hous- ing and cap assembly. Tool skips staples while dis- charging. Tool runs slowly or has a loss of power. Fasteners frequently jam the stapler. Stapler does not fire. 1. O-rings must be replaced & operation of safety yoke must be ch ...
-
Grizzly G6772 - page 18
G6044/G6772 16 Gauge Stapler Kit -17 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of main- tenance. This is Grizzly’s s ...
-
Grizzly G6772 - page 19
Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number ____________ E-Mail ___________________ FAX ____________ Model # ______________Serial#________________ Order # ______________ The following information ...
-
Grizzly G6772 - page 20
FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here ...
У вас вопрос, касающийся Grizzly G6772?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Grizzly G6772, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Grizzly G6772 со всей вероятностью он захочет поделиться методом ее решения.