-
Snapper 421618BVE - page 1
Safety Instructions & Operator’s Manual for REAR ENGINE RIDING MOWER SERIES 18 M ODEL 421618BVE MODEL NUMBER EXPLA NA TION 42 16 18 B V E CUTT ING WIDTH ENGINE OP TIONS ENGINE HP ENGINE T YPE SERIES DE SIGNA T ION ENGINE MODEL 42 - 42” Cutting Deck 16 - 16.0 HP Engi ne 18 - Se ri es Designation B - B r i g g s E n g i n e V - Over Head Valv ...
-
Snapper 421618BVE - page 2
2 IMPORTA NT SA FETY INSTRUCTIONS WARNING: This pow erful cutting machine is capable of amputating hands and f eet and can t hrow objects th at can cause in jury and damage! Failure to comply wi th the follo wing SAFETY inst ructions coul d result in serious injury or death to the ope rator or other persons. The owner of the machine must understa n ...
-
Snapper 421618BVE - page 3
3 IMPORTA NT SA FETY INSTRUCTIONS PREPA RA TION (Continued From Pre vious Page) 7. Keep people and pets out of mow ing area. Immediately ST OP blades, S T OP engine, and STOP mach ine if anyone enters t he area. 8. Check shields, deflectors, sw itches, blad e controls an d other saf ety devices freq uently for proper oper ation and location. 9. Mak ...
-
Snapper 421618BVE - page 4
4 TA BLE OF CONTENTS IMPO RTANT SA FET Y INSTRUCT IONS .........................................................................2-3 TABLE OF CONTENT S ...................................................................................................... 4 SECTION 1 - FA M ILIA RIZATION ............................................................... ...
-
Snapper 421618BVE - page 5
5 Section 1 - FA MILIA R IZA TION FIGURE 1.1 1.1 INTRODUCT ION This manual has been prepared f or the operator’s of the SNAPPER Rear Engine Rider. Its pur pose, aside f rom recom m ending standard oper ating procedures and routine servic e requirem ents, is to promote SAFETY through the use of ac cepted operating prac tices. Read, Understand a nd ...
-
Snapper 421618BVE - page 6
6 Section 2 - OPERA TING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the f ollowing check s and perf orm the ser vice required bef ore each star t-up. 2.1.1. Check tires and add or release air as needed to bring press ure to 12 psi in f ront and 12 psi in r ear tires. 2.1.2. Check guards , deflector s and covers to mak e sure all are in plac e and s ...
-
Snapper 421618BVE - page 7
7 Section 2 - OPERA TING INSTRUCTIONS 2.3 STA RTING & OPERA TION 2.3.1. ENGINE (ELECTRIC START) IMPO RTANT: W hen the ignition k ey is turned to “START ”, the engine will turn over, but will not start unless the Clutc h/Brake pedal is press ed all the w ay down, the Blade Lever is in the “Off ” position (See Figure 2.5). T he operator s ...
-
Snapper 421618BVE - page 8
8 Section 2 - OPERA TING INSTRUCTIONS 2.3 STA RTING & OPERA TION 2.3.1. ENGINE (ELE CTRIC START) (Continued) 8. Should the battery be too weak to star t the engine, Refer to Section “ ENGINE (MANU AL START )” to manually start the electr ic start engines . 2.3.2. ENG INE (M A NUA L STA RT ) IMPO RTANT: W hen the ignition k ey is tur ned to ...
-
Snapper 421618BVE - page 9
9 Section 2 - OPERA TING INSTRUCTIONS WA RNING Once blade is dise ngaged, it should come to a complete stop in 3 seconds or less. If the blade continues to rotate afte r 3 seconds, the blade brake must be adjust ed. Refer to Sect ion “BLADE BRA KE A DJUST M ENT” f or adjustment procedures or ret urn machine to an authoriz ed SNA PPER dealer fo ...
-
Snapper 421618BVE - page 10
10 Section 2 - OPERA TING INSTRUCTIONS WA RNING DO NOT leave machine with the engine running. Stop engine. Stop blade . Shift to neutral. E ngage parking brake. Remov e key. 2.4 STOPPING - ENGINE, WHEE L DRIVE, BLA DE 2.4.1. ENGINE 1. Stop engine by turning k ey to the “OFF” pos ition. See Figure 2.13. FIGURE 2.13 2.4.2. WHEEL DRIVE 1. Stop mot ...
-
Snapper 421618BVE - page 11
11 Section 2 - OPERA TING INSTRUCTIONS 2.4 STOPPING - ENGINE, WHEE L DRIVE, BLA DE 2.4.4. PA RK BRA KE 1. Engage park brak e by pushing clutch/brak e pedal “DOW N” and m oving the park brak e lever to the “ON” position. W hile holding the park brak e lever “ON”, release clutch/brak e pedal to set park brake. See Figure 2.16. FIGURE 2.16 ...
-
Snapper 421618BVE - page 12
12 Section 3 - MA INTENA NCE WA RNING DO NOT attempt any adjustments, maintenan ce, service or repairs with the engine running. STOP engine. ST OP blade. Eng age parking brake. Remo ve key. Remove spark plug w ire from sp ark plug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool before wo rkin ...
-
Snapper 421618BVE - page 13
13 Section 3 - MA INTENA NCE WA RNING DO NOT attempt any adjustments, maintenan ce, service or repairs with the engine running. STOP engine. ST OP blade. Eng age parking brake. Remo ve key. Remove spark plug w ire from sp ark plug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool before wo rkin ...
-
Snapper 421618BVE - page 14
14 Section 3 – MA INTENA NCE 3.2.8. LUBRICA TION – GREASE FIT TINGS The f ollowing components on the Rear Engine Rider are equipped with grease f ittings and require periodic lubrication. Apply Gener al Purpose greas e (NLGI No.2) with a grease gun. 1. Front W heel Bear ings. Refer to Section “FRON T W HEEL BEARING S – LUBRICAT ION”. 2. R ...
-
Snapper 421618BVE - page 15
15 Section 3 - MA INTENA NCE 3.3 SERV ICE - EVERY 25 OPERA TING HOURS (Continued fr om previous page) 3. 3 . 9. DIFFERENTIAL/CHA IN CA SE - LUBRICA T ION 1. Check the fill/level plug, for crack s and wear. Replace f ill/level plug if signs of wear are vis ible. IMPO RTANT: If the R ear Engine Rider will be on its rear bum per f or longer than two h ...
-
Snapper 421618BVE - page 16
16 Section 3 - MA INTENA NCE 3.5 EVERY T WO YEARS In addition to regular m aintenance, the following com ponents of the Rear Engine Rider s hould be caref ully ins pected every tw o years for wear or damage. Replac e worn or dam aged parts with genuine SNAPPER replacem ent parts available from an authorized SNAPPER dealer. 3.5.1. All bus hings and ...
-
Snapper 421618BVE - page 17
17 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance, service or repair s w ith the engine running. STOP engine. STOP blade. Eng age parking brake. Remov e key. Remove spark plu g w ire from spark pl ug and secure aw ay from plug. Engine and components are HOT. A void serious burns, allow all parts to cool ...
-
Snapper 421618BVE - page 18
18 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt any adjustments, maintenan ce, service or repairs with the engine running. STOP engine. ST OP blade. Eng age parking brake. Remo ve key. Remove spark plug w ire from sp ark plug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool b ...
-
Snapper 421618BVE - page 19
19 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt any adjustments, maintenan ce, service or repairs with the engine running. STOP engine. ST OP blade. Eng age parking brake. Remo ve key. Remove spark plug w ire from sp ark plug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool b ...
-
Snapper 421618BVE - page 20
20 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt any adjustments, maintenan ce, service or repairs with the engine running. STOP engine. ST OP blade. Eng age parking brake. Remo ve key. Remove spark plug w ire from sp ark plug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool b ...
-
Snapper 421618BVE - page 21
21 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt any adjustments, maintenan ce, service or repairs with the engine running. STOP engine. ST OP blade. Eng age parking brake. Remo ve key. Remove spark plug w ire from sp ark plug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool b ...
-
Snapper 421618BVE - page 22
22 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt any adjustments, maintenan ce, service or repairs with the engine running. STOP engine. ST OP blade. Eng age parking brake. Remo ve key. Remove spark plug w ire from sp ark plug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool b ...
-
Snapper 421618BVE - page 23
23 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt any adjustments, maintenan ce, service or repairs with the engine running. STOP engine. ST OP blade. Eng age parking brake. Remo ve key. Remove spark plug w ire from sp ark plug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool b ...
-
Snapper 421618BVE - page 24
24 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt any adjustments, maintenan ce, service or repairs with the engine r unning. Stop engine. Sto p blade. Engag e parking brake. Remov e key. Remove spark plug w ire from sp ark plug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool ...
-
Snapper 421618BVE - page 25
25 Section 4 - A DJUSTMENTS & REPA IR WA RNING The elect rolyte (acid) prod uces a highly explosiv e gas. Keep all sparks, flame and fire away from area when charging battery or w hen handling elec trolyte or battery . Electrolyte (ac id) is a highly c orrosive liquid. Wear eye protection . Wash aff ected areas immediately after hav ing eye or ...
-
Snapper 421618BVE - page 26
26 Section 4 - A DJUSTMENTS & REPA IR 4.6.6. BA T TERY T ESTING Battery Condition Chart State of Charge Syr inge Hydrometer Digital Voltmeter Five Ball Hydr ometer 100% Charged w/ Sulfate Stop 1.280 12.80v Five Balls Floating 100% Charged 1.265 12.60v Four Balls F loating 75% Charged 1.210 12.40v Three Balls Floating 50% Charged 1.160 12.10v Tw ...
-
Snapper 421618BVE - page 27
27 TROUBLESHOOTING PROBL EM PROBA BLE CA USE CORRECTIVE A CTION Engine Will Not 1 . F u el t a n k e m pt y. 1. Fill fuel tank with fres h fuel to proper level. Start Using 2. Engine needs chok ing. 2. Move chok e control to “CHO KE” position. Recoil Starter 3. Spark plug wire disc onnected. 3. Place spark plug wire onto spark plug. 4. Faulty p ...
-
Snapper 421618BVE - page 28
28 TROUBLESHOOTING PROBLEM PROBA BLE CA USE CORRECTIVE A CTION Rider Will Not M ove 1. Drive disc worn or damaged. 1. Replace drive disc . Loss Of T raction 2. Rubber drive disc is not track ing properly on drive disc . 2. Adjust r ubber drive disc . 3. Tapered ax le bolt and nut m issing. 3. Replace with SNA PPER tapered bolt & nut. 4. Axle be ...
-
Snapper 421618BVE - page 29
29 MAINTENA NCE SCHEDULE SUBJECT SERVICE TO BE PERFORMED REFERENCE PA GES EACH USE 5 HOURS 25 HOURS 50 HOURS 100 HOURS EA CH SEA SO N Engine Check Oil Lev el Page 6 X Tires Check Pressures Page 6 X Engine Initial Oil Change Page 12 X Engine Periodic Oil Cha nge Page 13 X* A ir Pre-Cleaner Service Sponge P re- Cleaner Element Engine Manual X** A ir ...
-
Snapper 421618BVE - page 30
30 3 YEA R LIMITED WARRA NTY For thr ee ( 3) years from purc hase date f or the original purc haser's residential, non- com m erc ial use, SNAPPER , through any authorized SNAPPER dealer will replace, free of charge ( except f or tax es where applicable) , any part or parts found upon exam ination by the factory at McDonough, Georgia, to be de ...
-
Snapper 421618BVE - page 31
31 PRIMARY MA INTENA NCE ...
-
Snapper 421618BVE - page 32
32 PRIMARY MA INTENA NCE ...
-
Snapper 421618BVE - page 33
33 PRIMARY MA INTENA NCE ...
-
Snapper 421618BVE - page 34
34 PRIMARY MA INTENA NCE ...
-
Snapper 421618BVE - page 35
35 SERVICE NOTES ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ _________________ ...
-
Snapper 421618BVE - page 36
36 Safety Instructions & Operator’s Manual for REAR ENGINE RIDING MOWER SERIES 18 IMPORTANT Snapper products are built using engines that meet or exceed all a pplicable emissions requirements on the date manufactured. The labels on thos e engines contain very important emissions infor mation and critical safety warnings. Read, Understand, and ...
У вас вопрос, касающийся Snapper 421618BVE?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Snapper 421618BVE, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Snapper 421618BVE со всей вероятностью он захочет поделиться методом ее решения.