-
Sennheiser SKM 5200-II - page 1
SKM 5200-II Instruction manual ...
-
Sennheiser SKM 5200-II - page 2
1 Conten ts Contents Important safety instru ctions ..................................................... .................... 2 The SKM 5200-II radio microphone .................... ............................................ 4 Delivery includes ................................................................. ................................ 6 P ...
-
Sennheiser SKM 5200-II - page 3
2 Important safety instructions Important safety instructions • Read this instruction manual . • Keep this instruction manual. Always include this instruction manu al when passing the product on to third parties. • Heed all warnings and follow all instructions in this instruction manual. • Use only a cl oth for cleaning the product. • Do ...
-
Sennheiser SKM 5200-II - page 4
3 Important safety instructions Intended use of the radio microphone Intended use of the product includes: • having read this instruction manual especial ly the chapter “Important safety instruc tions”, • using the product within the oper ating conditions and limitations described in this instruction manual . “Improper use” means us ing ...
-
Sennheiser SKM 5200-II - page 5
4 The SKM 5200-II radio microphone The SKM 5200-II radio microphone The SKM 5200-II is a professional hand-held radio microphone transmitter that is easy to use and is easily adapta ble to a wide variety of applications: • Suitable for all-pur pose use, e.g. for reporting, stage and studio applications. • Rugged housing and intuitiv e, menu-ass ...
-
Sennheiser SKM 5200-II - page 6
5 The SKM 5200-II radio microphone The channel bank syste m The transmitter is available in five UHF frequency ranges with up to 184 MHz switching bandwidth: The transmitter has two frequency banks: Channel Frequency bank “FIX” “VAR” 1 The transmission f requencies are factory-prese t (see enclosed frequency table) and cannot be changed. Th ...
-
Sennheiser SKM 5200-II - page 7
6 Deliver y includes Va r ia n t s • SKM 5200-II (hematite -colored housing) • SKM 5200 BK-II (black housing) • SKM 5200 NI-II (nickel-colored housing) Suitable receivers • EM 1046 system • EM 3532, EM 3031, EM 3032 • EK 3041, EK 3241 • EM 3731, EM 3732, EM 3732 COM • EM 3731-II, EM 3732-II, EM 3732 COM-II Delivery includes 1 radio ...
-
Sennheiser SKM 5200-II - page 8
7 Product overview Product overview Overview of the SKM 5200-II radio microphone Operating controls LC display panel Screw-on microphone head (not included in the delivery) Body of radio microphone Power pack (not included in the delivery) Battery compartment locking mechanism Antenna LC displa y Multi-function switch wi ...
-
Sennheiser SKM 5200-II - page 9
8 Product overview Display backlighting When the lock mode is deactivated, the display remains backlit for approx. 20 seconds after pressing a button. Operation and battery status indication The LED ON/L OW BA TT provides information on the current operating state of the radio microphone: LED ON/LOW BATT ... Meanin g ... lights up normally ...
-
Sennheiser SKM 5200-II - page 10
9 Putting the radio microphone into operation Putting the radio microphone into operation Inserting, removing and changing the power pack For powering the r adio microphone, you can either use the Sennheiser B 5000-2 battery box (1.5 V AA size batteries) or the rechargeabl e Sennheiser BA 5000-2 battery pack. For regular use, we recommend using the ...
-
Sennheiser SKM 5200-II - page 11
10 Putting the radio microphone into operation Inserting batteries into the B 5000-2 battery box LC display shown on the example of the B 5000-2 battery box Recharging the BA 5000-2 battery pack Before using the BA 5000-2 battery pa ck (see “ Accessories” on page 30) for the first time or if you have no t used it for several weeks, you must cha ...
-
Sennheiser SKM 5200-II - page 12
11 Putting the radio microphone into operation LC display shown on the example of the BA 5000-2 battery p ack Changing the mi crophone head Place the appropriate charging adapter in the charging compartment of the charger. Insert the BA 5000-2 battery pack into the charging adapter . Charging time: approx. 2.5 hrs with the L 50 ...
-
Sennheiser SKM 5200-II - page 13
12 Putting the radio microphone into operation Different micro phone heads ensure suitabil ity for a wi de variety of applications: Pull off the microphone head . Put on the new microphone head. Screw tight the microphone head by turning it against the direction indicated by the arrow. Model Type Pick-up pattern SPL ME 5002 condense ...
-
Sennheiser SKM 5200-II - page 14
13 Using the radio microphone Using the radio microphone Switching the radio microphone on/off T o switch the radio microphone on: T o switch the radio microphone off: Briefly pres s the ON / OFF button . The LED ON/ LOW BATT l i g h t s u p a n d the standard display is shown on the display panel ; af ter a short pause, “ RF ” ...
-
Sennheiser SKM 5200-II - page 15
14 Using the radio microphone Doing a frequency check The radio microphone has a frequency check mode that preve nts that the radio microphone transmits on an unwanted frequency after switch-on. If the displayed frequency is the wanted frequency: If you want to select another frequency, proceed as follows: Release the ON / OFF button . ...
-
Sennheiser SKM 5200-II - page 16
15 Using the radio microphone Deactivating the au tolock function t emporarily T o be able to make changes to the settings via the operating menu, you must temporarily deactivate the lo ck mode. Afte r you have exited the o perating me nu, the lock mode is automatically re-activated after 10 seconds. Y ou ca n also immediately activate the lock mod ...
-
Sennheiser SKM 5200-II - page 17
16 The operating menu The operating menu The buttons Button Mode Function ON / OFF , ESC Switched off • Briefly pressing the button: Switching the radio microphone on • Keeping the button pressed: Doing a frequenc y check Display mode • Briefly pressing the button (with activated autolock function): Immediately activating the lock mode • Br ...
-
Sennheiser SKM 5200-II - page 18
17 The operating menu Overview of the operating menu : W orking with the operating menu The operating menu has three mo des: •D i s p l a y m o d e In display mode , you can display the current menu se ttings one after the other – even when t he lock mode is activated. • Selection mode In selection mode, you can select the menu whose setting ...
-
Sennheiser SKM 5200-II - page 19
18 The operating menu By way of example of the “ LOWCUT ” menu, this section describes how to use the operating Af ter switch-on After switch-on, the standard disp lay is shown on the display panel. Depending on the setting, the transmission frequency, the channel number or the name of the ra dio microphone is disp layed. Displaying the menu se ...
-
Sennheiser SKM 5200-II - page 20
19 The operating menu Changing to the select ion mode T o change from display mode to se lection mode, y ou ha ve to deactivate the lock mode. Deactivate the lock mode (see “Deactivating the autolo ck function temporarily” on page 15). Y ou can now select the menu whose settings you want to adjust. Press the multi-f unction switch ( ...
-
Sennheiser SKM 5200-II - page 21
20 The operating menu Adjusting a setting Use the mult i-function swi tch to adjust the setting of the selected menu. By briefly slidin g the multi-function switch to the position (UP) or (DOWN), the display jumps either forwards or backwards to the next setting. In the “ AT T E N ”, “ CHAN ”, “ TUNE ” a nd “ NAME ...
-
Sennheiser SKM 5200-II - page 22
21 The operating menu Overview of the operating menu Deactivate the lock mode before adju sti ng the settings (see “Dea ctivating the autolock function temporarily” on page 15). Pressing the ON / OFF button will cancel your entry (ESC fu nction) and return you to the display mode. SET / ON Display mode Selection mode Setting mode CH CH CH S ...
-
Sennheiser SKM 5200-II - page 23
22 The operating menu Display mode Selection mode Setting mode CH SET SET SET SET SET SET Adjusting the low-cut-frequency Current low-cut-frequency 190 Hz 120 Hz Selecting the standard display NAME VIEW FREQ Current standard display / : FREQ, CHAN, NAME Loading the factory-preset default settings RST . OK RESET RST . NO Security check / : OK, NO ? ...
-
Sennheiser SKM 5200-II - page 24
23 Adjustment tips for the operating menu Adjustment tips for the operating menu Selecting a channel – “ CHAN ” Via the “ CHAN ” menu, you can switch between the channels in the channe l banks “ FIX ” and “ VA R “. The radio microphone is not transmitting while this adjustment is being made . When changing to the setting mode of t ...
-
Sennheiser SKM 5200-II - page 25
24 Adjustment tips for the operating menu The transmissi on frequencies are tunabl e in 5- kHz steps wi thin a switching bandwidth of 184 MHz max. There are two options for setting the frequencies: • You can set a new frequency for the selected channel: • You can chan ge to a differ ent cha nnel and set a new frequenc y for the new channel: Whe ...
-
Sennheiser SKM 5200-II - page 26
25 Adjustment tips for the operating menu Entering a name – “ NAME ” Via the “ NAME ” menu, you can enter a f reely selectable name for the radio microphone. This name can be displa yed on the standard display and can consist of up to six characte rs such as: • letters (without pronounciation marks), • numbers from 0 to 9, • special ...
-
Sennheiser SKM 5200-II - page 27
26 Adjustment tips for the operating menu Adjusting the micro phone sensitivity – “ A TTEN ” Via the “ AT T E N ” menu, you can adjust the radio microphone’s sen sitivity by changing its input attenuation. Adjusting the low-cut fr equency – “ LOWCUT ” T o reduce unwanted low-frequency no ise such as engine, wind and rumble noise, ...
-
Sennheiser SKM 5200-II - page 28
27 Adjustment tips for the operating menu Loading the factory-preset default settings – “ RESET ” Via the “ RES ET ” menu, you can load the fact ory-preset default settings. Afte r the reset, the standard disp lay is sho wn on the display panel. Activating/deactivating the automatic lock mode – “ LOCK ” The radio microphone has an a ...
-
Sennheiser SKM 5200-II - page 29
28 Maintenance and care Adjusting the ou tput power – “ POWER ” The radio microphone features switchable output power. With reduced output power, the operating time increases. In addition, you can also adjust the radio microphone to “Low Intermodulation mode” (“ LoI ” ) . B y s o d o i n g , t h e r a d i o m i c r o p h o n e ’ s i ...
-
Sennheiser SKM 5200-II - page 30
29 If a problem occurs ... If a problem occurs ... If a prob lem occurs that is no t listed in the above table or if the problem cannot be solved with the proposed solutions, please contact your local Sennheiser partner for assistance. T o find a Sennheiser partner in your country, search at www.s ennheiser.com under “Servi ce & Support”. P ...
-
Sennheiser SKM 5200-II - page 31
30 Accessories Accessories 003763 ME 5009 microphone head 003760 ME 5005 microphone head 005249 ME 5005e microphone head 003762 ME 5004 microphone head 003761 ME 5002 microphone head 500822 MD 5235 microphone head 008474 Neumann KK 105 S microph one head 008476 Neumann KK 105 S-BK microphone h ead 008533 Neumann KK 104 S-BK microphone h ead 008534 ...
-
Sennheiser SKM 5200-II - page 32
31 Specifications Specifications Modulation wideband FM Frequency range range L: 470 to 638 MHz range N: 614 to 798 MHz range N-US: 614.075 to 697.925 MHz range N-GB: 606 to 790 MHz range P: 776 to 866 MHz Switching bandwidth up to 184 MHz Transmission frequ encies frequenc y bank “ FIX ” with up to 59 factory-preset frequencies frequency bank ...
-
Sennheiser SKM 5200-II - page 33
32 Specifications Operating conditions Storage and transport cond itions Power consumption (without LC display ill umination) PWR.LO: approx. 140 mA ( 1 0m W ) a t 2 . 4V PWR.HI: approx. 195 mA ( 5 0m W ) a t 2 . 4V PWR.LoI: approx. 195 mA ( 1 0m W ) a t 2 . 4V Operating time with B 5000-2: PWR.LO: approx. 13 hrs PWR.HI: approx. 7 hrs 30 min PWR.Lo ...
-
Sennheiser SKM 5200-II - page 34
33 Specifications In compliance with Approved by Europe EMC EN 3014 89-1/-9 Radio EN 300422-1/-2 Safety EN 60065 EN 62311 (SAR) Canada Industry C anada RSS- 123 IC: 2099A-SKM5200A2 limited to 698 MHz USA FCC-Part 74 FCC ID: DMOSKM5200A2 limited to 698 MHz ...
-
Sennheiser SKM 5200-II - page 35
34 Manufact urer Declarati ons Manufacturer Declarations War ra n ty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product . For the current warranty conditio ns, please visit our website at www.sennheiser.com or contact your Sennheiser partner. In compliance with • RoHS Directive (2002/95/EC) • Battery Directive ...
-
Sennheiser SKM 5200-II - page 36
35 Manufacturer Declarations • Reorient or relocate the receiving antenna. • Increase the separation between the e quipment and receiver. • Connect the equipment into an outl et on a circuit different from that to which the receiver is connected. • Consult the dealer or an experien ced radio/TV techn ician for help . This class B digital de ...
-
Sennheiser SKM 5200-II - page 37
Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in Germany, Publ. 11 /10, 5 42645 /A01 ...
У вас вопрос, касающийся Sennheiser SKM 5200-II?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Sennheiser SKM 5200-II, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Sennheiser SKM 5200-II со всей вероятностью он захочет поделиться методом ее решения.