-
Miele T 1520 - page 1
Operating Instructions V ented Dr y er T 1520 T o prevent accidents and machine damage read these instructions before installation or use. U M.-N r . 05 275 070 ...
-
Miele T 1520 - page 2
IMPORT ANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Quick Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Center pages Guide to the dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Before loading the ...
-
Miele T 1520 - page 3
, W ARNING - T o reduce the risk of fire, electric shock, or injury to per - sons when using your appliance, fol - low basic precautions, including the following: Read all instructions before using the appliance. Do not dry ar ticles that have been previously cleaned, washed, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flam ...
-
Miele T 1520 - page 4
Do not repair or r eplace any part of the appliance or attempt any ser - vicing unless specifically recom - mended in these Operating Instruc - tions. Repairs to electrical appliances should only be perfor med by qualified personnel. Incorrectly r epaired ma - chines may pose a considerable risk to the user . GROUNDING INSTRUCTIONS This appliance m ...
-
Miele T 1520 - page 5
1 Supply cable with plug 2 Control panel 3 Drum door 4 Exhaust connection (right, left or rear) 5 Four height-adjustable legs Guide to the dryer 5 ...
-
Miele T 1520 - page 6
Pushbuttons – Door Opens the door or can be used to cancel a program (does not stay pushed in). – ON / OFF T ur ns the machine on and off or can- cels a program. When the macnine is turned on, the "On" indicator will light up if the door is closed. If the door is open, the drum interior light will be on. – Buzzer Allows the buzzer t ...
-
Miele T 1520 - page 7
The appliance must be correctly in - stalled and connected before the first use. Please see the "Installation instructions". ^ Check the dryer drum for any residue that may have deposited during the manufacturing process. If necessary clean out with a cloth. Before drying, check fabric care la - bels for special drying instructions. q = D ...
-
Miele T 1520 - page 8
1. T urn on the dryer and load the laundry ^ Press the "On/Of f" button to turn on the dryer . ^ Press the "Door" button to open the door . ^ Load the laundry loosely into the drum. ^ Close the door with a firm swing - do not push it shut. Do not use fabric softener sheets in this dryer . Silicates contained in these sheets coul ...
-
Miele T 1520 - page 9
2. Select a program ^ T ur n the program selector clockwise or counterclockwise to the desir ed program. Please refer to the "Pr ograms" chart. The program status will be stor ed for 30 minutes in the event of a power failure. 3. Select the Buzzer to signal the end of the program (if desired) ^ Press the "Buzzer" button. 4. Sele ...
-
Miele T 1520 - page 10
Program F abric Note CO TT ONS Extra dry For drying laundr y that will be stored away , such as linens or seasonal clothing. The "Extra dry" program should not be selected for jersey mate - rials. Items may shrink. Normal Uniform loads of cotton e.g. sheets, underwear , socks. – Normal- Knitted cotton fabrics that may shrink, e.g. jerse ...
-
Miele T 1520 - page 11
5. Start the program ^ Press the "ST ART" button. 6. At the end of a program The "Anti-crease/Finish" indicator will light at the end of a program. ^ T ur n the program selector to "Finish". ^ Press the "Door" button to open the door . ^ Remove the laundry . ^ Check that the drum is empty . ^ Clean the lint f ...
-
Miele T 1520 - page 12
Cleaning the lint filter The lint filter must be cleaned before or after every program. ^ Open the door and remove the lint filter . ^ Wipe the lint off the filter with your hand (do not use any sharp objects!) ^ Any lint remaining in the hollow part of the door can be removed thr ough the gap at the bottom with a dust brush or vacuum. ^ Return the ...
-
Miele T 1520 - page 13
Changing the light bulb , W ARNING T o reduce the risk of electric shock, disconnect this appliance from the power supply by unplugging or trip - ping the circuit br eaker . ^ Unscrew the plastic bulb cover lo- cated inside the drum and above the door (see illustration.) ^ Replace the light bulb with a temper - ature pr oof bulb (part # 02 150 900) ...
-
Miele T 1520 - page 14
With the following guide, minor problems can be fixed without a service call. What if P ossible fault Fix . . . the tumble dryer fails to start when turned on? Check whether the "On" in - dicator lights up. If so, fail - ure to start may be due to an incorrect pr ogram se - lection procedur e. Repeat the program selection procedur e in th ...
-
Miele T 1520 - page 15
What to do if ,...? Cause . . . Remedy . . . . . . the "anti-crease" indicator starts flash - ing? – T ur n the program selector to "finish". – T ur n the machine off and then on again. – Select a program. – Press the "Start" button. If the indicator lamp starts flashing again, this indicates a fault in the mac ...
-
Miele T 1520 - page 16
In the event of a problem which you cannot fix yourself, or to order spar e parts please contact: – Y our Miele Dealer or – The Miele T echnical Service Department USA 1-800-999-1360 techserv@mieleusa.com CDN 1-800-565-6435 service@miele.ca When contacting the T echnical Service Department, please quote the model and serial number of your appli ...
-
Miele T 1520 - page 17
Quic k Guide Remov e this guide f or easy ref erence Please read all instructions, especially the "Important Safety Instructions", before using the dryer . ...
-
Miele T 1520 - page 18
1. T urn on the dryer and load the laundry ^ Press the "On/Of f" button to turn on the dryer . ^ Press the "Door" button to open the door . ^ Load the laundry into the drum. Make sure that ther e is enough space in the drum for clothes to tumble freely . T o prevent fabric damage, check that laundry will not be caught in the clo ...
-
Miele T 1520 - page 19
4. Select the load siz e ^ Press the "Load size" button in for a full load. Press the "Load size" button out for a small load. 5. Star t the program ^ Press "ST ART". 6. At the end of a program The "Anti-crease / Finish" indicator will light. ^ T ur n the program selector to "Finish". ^ Press " ...
-
Miele T 1520 - page 20
Program F abric Note CO TT ONS Extra dry For drying laundr y that will be stored away , such as linens or seasonal clothing. The "Extra dry" program should not be selected for jersey mate - rials. Items may shrink. Normal Uniform loads of cotton e.g. sheets, underwear , socks. – Normal- Knitted cotton fabrics that may shrink, e.g. jerse ...
-
Miele T 1520 - page 21
INST ALLA TION INSTR UCTIONS ...
-
Miele T 1520 - page 22
IMPORT ANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 INST ALLA TION INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Disposal of the packing materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Disposal of an old appliance . . . . ...
-
Miele T 1520 - page 23
Installation, repair and mainte - nance work should be by a Miele authorized service technician. Work by unqualified persons could be danger - ous and could void the warranty . Before installation, disconnect the tumble dryer from the electrical supply by unplugging the power cord or tripping the circuit br eaker . GROUNDING INSTRUCTIONS This appli ...
-
Miele T 1520 - page 24
Disposal of the packing materials The cardboar d box and packing materi - als protect the appliance during ship - ping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of childr en. Dan - ger of suffocation! Please r ecycle. Disposal of an old ...
-
Miele T 1520 - page 25
Level the dryer The dryer must be level to ensure safe and proper operation. Minor discr epan- cies do not, however , have an adverse effect on operation. ^ The machine can be leveled by turn - ing the legs clockwise or counter - clockwise as necessary . An air flow gap of 3 / 8 " (10 mm) must be provided between the machine and the floor . Th ...
-
Miele T 1520 - page 26
Changing the decor panel Note: The door should be closed when installing the decor panel. ^ On the door lock side remove the 4 screws (3 on the side and 1 under - neath) and the door strip. ^ Loosen the remaining 7 scr ews on the lower and side decor strips until the decor panel can be bowed slightly and taken out. ^ Insert the new panel. ^ Reassem ...
-
Miele T 1520 - page 27
For best drying results, avoid extra long ducting with too many bends or angles. Avoid ducting in tight corners. Use flexible metal pipe or rigid metal pipe for venting. Non-metallic flexible hose should not be used since it is a potential fire hazar d. The shorter the exhaust ductwork, the more ef ficient the dryer will be. Ex - pelled air is slow ...
-
Miele T 1520 - page 28
Calculate the effective duct length The overall duct length will determine the duct diameter . ^ Measure the actual duct length needed: 1. Establish the number of elbows or bends necessary , noting the type of bend, angle and radius involved (see, T able 1). 2. Add the additional duct length as specified in T able 1 to the actual duct length to get ...
-
Miele T 1520 - page 29
Flexible metal ducting has been used for the following example. Other duct types may requir e additional duct length (see T able 1.) Example: V ent connection left . . . . . . . 39" (1.0 m) Length (L) . . . . . . . . . . . . . . . 47" (1.2 m) Lower radius (R) . . . . . . . . . . 19" (0.5 m) Height (H) . . . . . . . . . . . . . . . 39 ...
-
Miele T 1520 - page 30
W all vent duct 1. Louvred wall vent frame 2. W all vent duct 3. Adapter 4. Louvred wall vent 5. Flap 6. Screw Dryer top view 1. W all pipe 2. Flexible foam gasket A flexible foam gasket must be used if the tumble dryer is directly connected to the wall vent. inch cm 4 1 / 4 " 10.8 4" 10 23 1 / 2 "6 0 28 1 / 2 " 72.5 INST ALLA T ...
-
Miele T 1520 - page 31
Example 1 Connection of the rigid metal pipe to the dryer (side view). 1. KA-pipe 2. Adapter Example 2 Height of vent adapter in a stacked in- stallation. Connect the ducting ^ Attach the ducting to the vent. ^ Move the dryer close to its final posi - tion. ^ Attach the ducting to the exhaust port via the duct adapter , securing with duct tape or a ...
-
Miele T 1520 - page 32
T o change the exhaust connection from the rear of the mac hine to the left side of the machine ^ Remove the vent socket from the r ear exhaust port by inser ting a thin screwdriver into the slot by the r etain- ing clip. Press the clip gently up- wards and at the same time turn the connector counterclockwise. ^ Press the r etaining clip of the cap ...
-
Miele T 1520 - page 33
Make the electrical connection GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or break - down, grounding will r educe the risk of electric shock by providing a path of least resistance for electric cur - rent. This appliance is equipped with a cord having an equipment-gr ound - ing conductor and a grounding plug ...
-
Miele T 1520 - page 34
30 ...
-
Miele T 1520 - page 35
31 ...
-
Miele T 1520 - page 36
All rights reserved / 0803 This bio-friendly paper was bleached without the use of chlorine. M.-N r . 05 275 070 / V03 ...
У вас вопрос, касающийся Miele T 1520?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Miele T 1520, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Miele T 1520 со всей вероятностью он захочет поделиться методом ее решения.