-
StarTech.com NETRS232_1 - page 1
Manual Revision: 05/23/2013 For the most up-to-date information, please visit: www.startech.com DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr .startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.co ...
-
StarTech.com NETRS232_1 - page 2
Instruction Manual FCC C ompliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment genera tes, uses and can radiate rad ...
-
StarTech.com NETRS232_1 - page 3
Instruction Manual i T able of C ontents Int roduc tion ... ..... ..... ..... .... ..... ..... ..... .... ..... ..... .... ..... ..... ..... .... ..... ..... ..... ... 1 Packaging Conten ts ................................................................................................................................. 1 System Requirements ........ ...
-
StarTech.com NETRS232_1 - page 4
Instruction Manual 1 Introduction Thank you for pur chasing a StarT ech.com Ethernet Remote Serial interface converter . With this one, two , or four port converter , your RS-232 serial devices can be placed anywhere on your Ethernet W AN/LAN and still per form as if they w ere right beside you. Ev en at the longest distances, control of your seria ...
-
StarTech.com NETRS232_1 - page 5
Serial Rx LED Serial T x LED Serial Port Network LEDs RJ-45 Port Pow er LED DC Pow er Port Instruction Manual 2 Hardwar e Guide ...
-
StarTech.com NETRS232_1 - page 6
Hardwar e Installation 1. Plug the power adapt er into the Power port on the conv er ter and plug the other end into an available pow er source. The red Po wer LED onthe converter should now be illuminated. 2. Connect the conv er ter to your network b y doing one of the following: • Using a straight-through RJ-45 cable to connect the conv er ter ...
-
StarTech.com NETRS232_1 - page 7
Conguring the Network Settings The IP Extender Manager software displays information in a format similar t o Window s Explorer . Any NETRS232 devices on your network are display ed in the “IP Extenders Near Me” branch of the “My IP Extender Network” tree. Each NETRS232 device on your network will need a unique IP address. These can be se ...
-
StarTech.com NETRS232_1 - page 8
Conguring Network Settings U sing a W eb Browser The NETRS232 converter contains an embedded web server that allows y ou to congure your device ’ s network settings through your w eb browser . T o congure an NETRS232’ s network settings using a web browser , open your w eb browser and enter the device’ s IP address in the browser’ ...
-
StarTech.com NETRS232_1 - page 9
6. Congure the devic e. T he following network and port settings for the device can be congured in a T elnet session: Device settings (for the interface converter device): • IP address • Net mask • Gatewa y • NetBios name (Device Name) • W orkgroup Port settings (for each serial port individually): • T CP por t number • P or t m ...
-
StarTech.com NETRS232_1 - page 10
Activating and Deactivating NETRS232 Ports NETRS232 por ts that hav e been detected as existing on the network are not initially activated for your PC. T o access a serial port, you must rst activate it. Y ou can activate a port on one computer , some computers, all computers, or none of the comput ers on your network. T o activate a port, open ...
-
StarTech.com NETRS232_1 - page 11
There are two ic ons that depic t the state of the NETRS232_x ports and devices: Icon: Device available on the network. Icon with red X: Device not available on the network. Icon with green square: Under “My Comput er, ” this icon means the port is available. Under “My IP Extender Neighborhood, ” this icon means the port is ac tivat ed loca ...
-
StarTech.com NETRS232_1 - page 12
Adv anced Settings Ports that have been activated on y our PC can generally be used without any further conguration. There are , however , additional conguration options available through the IP Extender Manager . P or t Modes The interface converter converts serial port data to and from TCP/IP packets over Ethernet. Each port exchanges TCP/I ...
-
StarTech.com NETRS232_1 - page 13
Virtual por t (driv er) settings The virtual por t allows a serial port on an NETRS232 device to be used in same manner as a local serial port when the por t is congured in Windows Mode (described above). In this state, the driver for the virtual port converts local serial por t accesses int o T CP/ IP packets to be exchanged with NETRS232 port. ...
-
StarTech.com NETRS232_1 - page 14
T o preven t this dicult y , NETRS232 Links have a “ discovery ” mode that allow s the correct NETRS232 Link por t to be f ound even when the IP address of the associated box has changed. T o use this discov er y mode, a “port binding” must be created for that virtual por t. A port binding is a network identication of the target NETRS ...
-
StarTech.com NETRS232_1 - page 15
Binding to IP Address The IP address of a network device is assigned by either the sy stem administrator or through a DHCP server . Binding a vir tual port to an IP address will for ce that virtual por t to attempt a connection to an y device with that par ticular IP address only . Binding to an IP address provides dynamic connections. Device IP ad ...
-
StarTech.com NETRS232_1 - page 16
W AN Activation Activating and accessing the virtual serial port on a NE TRS232 device across a W AN can be done in two dierent wa ys, depending on how the NETRS232 device is accessible. • NETRS232 device is accessible externally – is directly accessible on the Internet. • NETRS232 device accessible internally – is located behind a gatew ...
-
StarTech.com NETRS232_1 - page 17
Instruction Manual 14 4. Ensure that the port(s) to use W AN ac tivation on ar e congured for “Driver Mode” . 5. Record the TCP port number of the port(s) to be accessible. 6. With the IP addr ess and T CP por t number(s) of the NETRS232 device in mind, enable port for war ding on your gateway/router f or each por t to be made remotely acces ...
-
StarTech.com NETRS232_1 - page 18
Instruction Manual 15 Specications Internet Protoc ols IP , HT TP , ICMP , T CP , TFTP , and UDP Connectors 1 x RJ-45 Ethernet port (female) 1 x DC Pow er NETRS232_1 1 x DB-9 serial port (male) NETRS232_2 2 x DB-9 serial ports (male) NETRS232_4 4 x DB-9 serial ports (male) LEDs 1 x Pow er 2 x Ethernet Link/Activity 1 x Serial T x (per serial por ...
-
StarTech.com NETRS232_1 - page 19
Instruction Manual 16 T echnical Suppor t StarT ech.com’ s lif etime technical support is an integral part of our c ommitment to provide industry-leading solutions. If you ever need help with your product, visit ww w .startech.com/support and access our comprehensive selection of online tools , documentation, and downloads. For the la test driver ...
-
StarTech.com NETRS232_1 - page 20
Hard-to-nd made easy . At StarT ech.com, that isn ’t a slogan. It ’ s a promise. StarT ech.com is your one -stop source for ever y connec tivity part you need. From the latest technology t o legac y pr oduc ts — and all the par ts that bridge the old and new — we can help you nd the parts that connect your solutions. We make it easy t ...
У вас вопрос, касающийся StarTech.com NETRS232_1?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с StarTech.com NETRS232_1, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с StarTech.com NETRS232_1 со всей вероятностью он захочет поделиться методом ее решения.