-
DCS BGA26-BQ - page 1
THE PROFESSIONAL 26” BGA GRILL Use a nd Ca re Gu ide MODEL: BGA26-BQ ...
-
DCS BGA26-BQ - page 2
1 Thank you for selecting this DCS Professional “BGA ” Series Grill. Bec ause of these appliances’ unique features we have dev eloped this Use and Care Guide. It contains valuable information on how to properly operate and maintain your new grill for y ears of safe and enjoyable cooking. To help ser ve y ou better, please fill out and submit ...
-
DCS BGA26-BQ - page 3
2 SAFET Y PRACTICES & PRECA UTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5 GRILL MODEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 GAS REQUIREMENTS . . . . . . . . . . . . . . . ...
-
DCS BGA26-BQ - page 4
3 3 IMPORT ANT SAFET Y NO TICE: Cer tain Liquid Propane dealers may fill liquid propane cylinders for use in the grill beyond cylinder filling capacity . This “O verfilling” may create a dangerous condition. “Over filled” tanks can build up excess pressure . As a safety device , the tanks pressure relief v alve will ve nt propane gas vapor ...
-
DCS BGA26-BQ - page 5
4 F or personal safety , wear proper apparel. Loose fitting garments or sleeves should nev er be worn while using this appliance. Some synthetic fabrics are highly flammable and should not be worn while co oking. Only certain types of glass, heat-proof glass cer amic, earthenware, or other glazed utensils are suitable for grill use . Use of these t ...
-
DCS BGA26-BQ - page 6
5 5 Clean the grill with caution. Avoid st eam burns; do not use a wet sponge or cloth to clean the grill while it is hot. Some cleaners produce no xious fumes or can ignite if applied to a hot sur face. Be sure all grill controls are turned off and the grill is c ool before using any type of aerosol cleaner on or around the grill. The chem ...
-
DCS BGA26-BQ - page 7
6 GRILL MODEL BGA26-BQ ...
-
DCS BGA26-BQ - page 8
7 GAS REQUIREMENTS Ve rify the type of gas supply to be used, either natural or LP , and mak e sure the marking on the appliance rating plate agrees with that of the supply . The rating plate is located on the inside back wall of the Grill. Never c onnect an unregulated gas line to the appliance. An installer supplied gas shut-off valve must be ins ...
-
DCS BGA26-BQ - page 9
8 GAS REQUIREMENTS TO H OOK-UP THE FIT TINGS SUPPLIED WITH THE GRILL: A ssemble as shown (F ig.01). Use threading compound on male threads only . Do not use threading co mpound on the male end of the 1/2 NPT to 3/8 flare adapter . Use a second pipe wrench to hold the grill inlet pipe to av oid shif ting any internal gas lines of the grill. Ensure t ...
-
DCS BGA26-BQ - page 10
9 INSULA TED JACKET : Do not build the Grill under unprotected combustible construction. If the Grill is to be placed into a c ombustible enclosure , an approved insulated jacket is necessary and is available fr om your dealer . U se only the DCS insulated jacket which has specifically been designed and tested f or this purpose. LO C A T ION: When ...
-
DCS BGA26-BQ - page 11
10 3" (to non- com bustible construc tion / minimum lid clearance ) 12" (to combustible construc tion) grill exhaust 25" 24" 10-3/8" 20-3/4" 23" 6" (to left and right side of grill to non- co mbustible con struction) (lid) 26-3/8" (cutout) 26-3/4" 12" (to co mbustible con struction) GENERAL: T ...
-
DCS BGA26-BQ - page 12
11 3" (to non-combustible construction / minimum lid clearance) 12" (to combustible construction) grill exhaust 24" 18-1/4" 20-3/4" 23" 25" 10-3/8" 26-3/8" 10-3/8" 11-3/8" 35-1/2" max. 20" 14-1/2" 25" 21" 32-3/8" 35-1/2" max. 20" 14-1/2" 25" 3&q ...
-
DCS BGA26-BQ - page 13
12 GENERAL: Although all gas connections on the grill are leak tested at the factory prior to shipment, a complete gas tightness check must be per formed at the installation site due t o possible mishandling in shipment, or excessive pr essure unk nowingly being applied to the unit. Periodically check the whole system for leaks , or immediately che ...
-
DCS BGA26-BQ - page 14
13 INST ALLER FINAL CHECKLIST : GRILL BURNER FLAME HEIGHT : To access the grill burner air shutters first remove the v alve panel by removing the four scr ews on the co rners of the valve panel. Remove the control knobs. Pull the valve panel outward while unplugging the igniter . With a screw driver , loosen the lock-screw on the face of the air sh ...
-
DCS BGA26-BQ - page 15
14 LO W S E T T I N G ADJUSTMENTS: T he valv es on the grill feature an adjustable low setting. Due to fluctuations in gas pressure, heating v alue or gas con version, you may feel it necessary to increase or decrease gas flow in the low position. TO A D J US T: 1. Light the burner . 2. T urn the control k nob to the low est setting (all the way c ...
-
DCS BGA26-BQ - page 16
15 GRILL: Each grill section consists of a large stainless steel burner , a series of stainless steel heat baffles, stainless steel radiant, and a stainless steel heat retaining cooking rack. Each burner is rated at 16,500 Btu/hr . Below each burner is a stainless steel heat baffle which reflects usable heat upward into the co oking area and reduce ...
-
DCS BGA26-BQ - page 17
16 USING THE GRILL 4. Place the food on the grill and c ook to the desired doneness. Adjust heat setting , if necessary . The control knob may be set to any position betw een “HI” and “L O” .M ost grilling is between “MED” and “HI” . 5. Allow grill to cool and clean the drip tr ay after each use. NO TE: If using LP gas, your preheat ...
-
DCS BGA26-BQ - page 18
17 TO L I G HT THE GRILL BURNER: NO TE: Open the grill lid. T urn all knobs to “OFF” . T urn the main gas supply on. If you smell gas, shut off gas supply and call for service. Push an d hold the igniter button, turn the selec ted burner knob to “HI” .I f b u r ner does not light in 4 to 5 seconds turn knob “OFF” and wait 5 minutes befo ...
-
DCS BGA26-BQ - page 19
18 BA T TERY REPLA CEMENT : 1. Remove grease tra y . 2. Pull battery downwards. ( This may r equire use of pliers - F ig 13.) 3. Re-install upward and push to snap - F ig 15. (Polarity as shown in F ig. 14). NO TE: Battery condition should be checked at least once a year . GRILL RACKS: T he easiest way to clean the grill is immediat ely af ter cook ...
-
DCS BGA26-BQ - page 20
19 GRILL AND ORIFICE CLEANING: Remove the grill r acks, then lift out the grill radiant tray . Grasp the burner , pull it up and slightly to the r ear of the unit so the burner head comes off the brass orifice at the fr ont, angle the burner sideways, and remov e. Burner Cleaning Clean the exterior of the burner with a wire brush. Clear stubborn sc ...
-
DCS BGA26-BQ - page 21
20 BEFORE CALLING FOR SERVICE: If the grill does not func tion properly , use the following checklist before contacting your dealer fo r service. Y ou may sav e the cost of a ser vice call. T roubleshooting is for gener al purposes only . If the problem persists and you f eel you require service, contact your dealer or the nearest authorized agency ...
-
DCS BGA26-BQ - page 22
21 ITEM DESCRIPTION P ART NO. 1G RILL RACK S/S 26 19498 2R ADIANT 33094 3 26” HEA T SHIELD , SIDE R/H 33096-01 26” HEA T SHIELD , SIDE L/H 33096-02 4A SS GRILL BURNER 12291 4B AIR SHUTTER 12003-1 5 26” HEA T SHIELD , CENTER 33095 6 MANIFOLD 26 18469 ITEM DESCRIPTION P ART NO. 7C ONTROL V AL VE 13017 8C ONTROL KNOB 14351 9K NOB BEZEL 14006-PL ...
-
DCS BGA26-BQ - page 23
22 ITEM DESCRIPTION P ART NO. 1F OLDING LID W/A BGA26 33054 2 HANDLE END CAP 18372-01/02 3S HOULDER BOL T 15003-06 4 HANDLE TUBE 32048-09 5W ARMING RACK BGA26 19497 6B ODY ASSEMBL Y 26 33097 7B OL T (SMALL) 15002-36 8W ARMING RACK RET . 26 L/H 32340-01 WA RMING RACK RET . 26 R/H 32340-02 9L ANDING LEDGE W/ASSY . 26 33129 10 C AGE NUT 15073 11 VAL V ...
-
DCS BGA26-BQ - page 24
23 GRILL CART P ARTS LIST ITEM DESCRIPTION P ART NO. 1S IDE SHELF ASSY 33058 2W ASHER 15005-15 3B OL T 15003-06 4F RONT P ANEL W/A 33093 5S IDE P ANEL L/H 33088-02 6B AC K BRACE 33090 7C ASTER STIFFENER 33092 8C ASTER W/BRAKE 18027 CA STER W/O BRAKE 18027-01 9S CREW 15002-29 10 SCREW 15003-06 11 NUT 15021-04 12 NUT 15021-09 13 C ASTER FIXED W/O BRA ...
-
DCS BGA26-BQ - page 25
24 MOUNT 26” GRILL TO THE CART To install the unit on the cart first remove the drip pan from the grill. Alwa ys wear gloves when handling the Prof essional 26” G as Grill. Although the unit is deburred prior shipment, some edges may still be sharp enough to cause injury during handling. With a minimum of (2) people, lower the unit onto cart as ...
-
DCS BGA26-BQ - page 26
25 WIRING DIA GR AM FOR BGA26-BQ #16281-02 #16281-03 #18350 #18353 ...
-
DCS BGA26-BQ - page 27
26 HOW T O OBT AIN SERVICE: F or warrant y service, contact DCS Customer Care at (888) 281-5698. Before you call, please have the f ollowing inf ormation ready : Model Number Se rial Number Date of installation A brief description of the problem Y our satisfaction is of the utmost impor tance to us. If a problem cannot be resolved t ...
-
DCS BGA26-BQ - page 28
27 L ength of Warr ant y: One (1) Y ear F ull par ts and Labor Cov ers the entire produc t. Fiv e ( 5 ) Y ear c omprehensive warranty co vering the grill (p/n 19498) radiant (p/n 33094) assemblies, and drip pans (p/n 33128). Should structural deterioration occur to the degree of non-per formanc e, a replacement will be furnished. Lifetime W arranty ...
-
DCS BGA26-BQ - page 29
28 NO TES ...
-
DCS BGA26-BQ - page 30
Pa rt No. 17602 Rev. B Litho in USA 02/2005 As product improvement is an ongoing pr ocess at DCS, we r eserve the right to change specifications or design without notice. F isher & P aykel Appliances, Inc. 5900 Skylab Road, Huntington Beach, CA 92647 C ustomer Car e: 888.281.5698 F ax: 714.372.7003 www .dcsappliances.com ...
У вас вопрос, касающийся DCS BGA26-BQ?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с DCS BGA26-BQ, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с DCS BGA26-BQ со всей вероятностью он захочет поделиться методом ее решения.