-
NEC E3100 - page 1
VERSA E3100 Disassembly Manual ...
-
NEC E3100 - page 2
NEC VERSA E3100 Disassembly Manual Page 2 Table of contents Overvie w ................................................................................................................................................................3 Technician Notes ..................................................................................................... ...
-
NEC E3100 - page 3
NEC VERSA E3100 Disassembly Manual Page 3 Overview This document contains st ep-by-steps disa ssembly instructions for VERSA E3100 notebook. The instructio n s explained how to remove or disassemble a particula r part with the help of photos. The size of the screws in used i s display on the right side of the guide. NEC reserves the right to make a ...
-
NEC E3100 - page 4
NEC VERSA E3100 Disassembly Manual Page 4 Hazardous Voltage There is hazardous voltage present insi de the computer when it is connect to an AC supply, even when the computer’s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an Authorized Service Provider for proper (UN)installation ...
-
NEC E3100 - page 5
NEC VERSA E3100 Disassembly Manual Page 5 ...
-
NEC E3100 - page 6
NEC VERSA E3100 Disassembly Manual Page 6 Removing the Battery Perform the following steps to remove t he battery: 1. Make sure to power off the VERSA E3100 2. Turn the unit upside down. 3. Unlock the battery and slide it out of its place as the arrow shows in Fig. 1 Fig. 1 Removi ng the battery ...
-
NEC E3100 - page 7
NEC VERSA E3100 Disassembly Manual Page 7 Removing the Memory an d Wireless LAN Module To remove the Memory and Wireless LAN Modul e, first remove the battery (see Removing the Battery ), then perform the following steps: 1. Release the two screws retaining the memory and wireless LAN module cover. Fig. 2 Removi ng the screws retaining the memory a ...
-
NEC E3100 - page 8
NEC VERSA E3100 Disassembly Manual Page 8 Removing the Hard Disk Drive To remove the hard disk drive, first remove the battery (see Removing the Battery ), then perform the following steps: 1. Remove the screws as sh own in Fig. 4 Fig. 4 Removing the Hard disk drive cover 2. Release the screws that secure HDD mo dul e as shown in Fig. 5 and careful ...
-
NEC E3100 - page 9
NEC VERSA E3100 Disassembly Manual Page 9 Removing the Optical Disk Drive To remove the ODD, first remove the battery (see Removing the Battery ) then perform th e following steps: 1. Remove the screws retaining the optical drive as shown in Fig. 6 Fig. 6 Releasi ng the optical drive 2. Eject the optical drive using pin as shown in Fig. 7 Fig. 7 Ej ...
-
NEC E3100 - page 10
NEC VERSA E3100 Disassembly Manual Page 10 3. Pull the ODD module out from the base unit as shown in Fig. 8 Fig. 8 Pulling the optical drive out from the base unit ...
-
NEC E3100 - page 11
NEC VERSA E3100 Disassembly Manual Page 11 Removing the Keyboard To remove the Keyboard, first remove the battery (see Removing the Battery ), then perfo rm the following steps: 1. Unscrew the keyboard cov er from the re ar of the system as sho wn in Fig. 9 Fig. 9 Releasi ng the keyboard cover 2. Lift up the keyboard cover carefully as shown in Fig ...
-
NEC E3100 - page 12
NEC VERSA E3100 Disassembly Manual Page 12 4. Turn the system over, remove another scre w a s shown in Fig. 12 Fig. 12 Removing the screw at t he bottom of the not ebook 5. Lift up the keyboard and disconnect it from the base system a s shown in Fig. 13 Fig. 13 Removing the keybo ard flex cable M2.5X6.5 Black ...
-
NEC E3100 - page 13
NEC VERSA E3100 Disassembly Manual Page 13 Removing the LCD Module To remove the LCD Module first remove the battery (see Removi ng the Battery ) and remove the Keyboard (see Removi ng the Keyboard ) then pe rform the follo wing steps: 1. Turn the system over and slowly push t he wireless LAN cable a s shown in Fig. 14 Fig. 14 Pushing the Wireless ...
-
NEC E3100 - page 14
NEC VERSA E3100 Disassembly Manual Page 14 2. Turn the notebook back, a) remove the two tape b) disconnect the LCD cable from the connector c ) unscrew the 4 screws all these steps is as shown on Fig. 15 Fig. 15 Steps to remove LCD Module 3. Gentle removes the LCD module. M2.5X6.5 Black ...
-
NEC E3100 - page 15
NEC VERSA E3100 Disassembly Manual Page 15 Removing the LCD Panel To remove the LCD panel, first remove the LCD module (see Removing the LCD Modul e ), then perform the following steps: 1. Use a pin to remove the rubber cover on the LCD mo dule as shown in Fig. 16 2. Remove all screws as shown in Fig. 16 and carefully remove the LCD cover. Fig. 16 ...
-
NEC E3100 - page 16
NEC VERSA E3100 Disassembly Manual Page 16 4. To remove the LCD, remove the 4 screws as shown in Fig. 18 Fig. 18 Removing the LCD p anel M2.5X4.5 Black ...
-
NEC E3100 - page 17
NEC VERSA E3100 Disassembly Manual Page 17 Removing the Switch Board Modul e To remove the Switch Board Modu le first remove the battery (see Removing the Battery ) and remove the Keyboard (see Removin g t he Keyboard ) then perform t he following steps: 1. Unscrew the screw on the switch b oard and detached the flex cable as sho wn on Fig 19. Fig. ...
-
NEC E3100 - page 18
NEC VERSA E3100 Disassembly Manual Page 18 Removing the Top Cover Assembly To remove the Top Cover Assembly first remove the battery (see Removing the Battery ), remove the Keyboard (see Removin g t he Keyboard ) and re move the LCD mod ule ( See Removing LCD module ) then perform the following steps: 1. Remove a screw and the three cables as shown ...
-
NEC E3100 - page 19
NEC VERSA E3100 Disassembly Manual Page 19 2. Turn the system over and remove all the 14 screws as shown o n Fig 2 1 Fig. 21 Remove all the 14 screw s 3. Turn the system back; slowly remove t he top cover assembly a s sho wn in Fig 22. Fig. 22 Removing the screw s retaining the Heat Plate M2.5X6.5 Black ...
-
NEC E3100 - page 20
NEC VERSA E3100 Disassembly Manual Page 20 Removing the Main Boar d To remove the Main Board, first remove the Top Cover Assembly (see Removi ng Top Cover Assembly ) then perform the following st eps: 1. Remove the 6 screws and detached the three con nectors as shown o n Fig 2 3 Fig. 23 Removing screw s and the connectors on the main board 2. Remov ...
-
NEC E3100 - page 21
NEC VERSA E3100 Disassembly Manual Page 21 3. Slowly lift up the main board as shown in Fig. 25 Fig. 25 Slowly removing the main boa r d ...
-
NEC E3100 - page 22
NEC VERSA E3100 Disassembly Manual Page 22 Removing the CPU To remove the CPU first remove the main board (see Removing Mai n Board ) then perform the following steps: 1. Disconnect Fan connectio n and remove the CPU Heat sink screws in de scending order (5 Æ 4 Æ 3 Æ 2 Æ 1 ), then lift up the CPU heat sink + Fan as shown in Fig. 26. Fig. 26 Rem ...
-
NEC E3100 - page 23
NEC VERSA E3100 Disassembly Manual Page 23 Removing the MDC Modem To remove the MDC Modem, first remov e the main bo ard (see Removing Main Board ) then perform the following steps: 1. Unscrew the two screws and disconnec t the connector a s sho wn on Fig. 28 Fig. 28 Removing M DC modem Removing the Touch Pad To remove the touch pad, first remove t ...
-
NEC E3100 - page 24
NEC VERSA E3100 Disassembly Manual Page 24 Removing the Bluetooth Module To remove the Bluetooth Module, first remove the main board (see Removing Main Board )), then perform the following steps: 1. slowly remove the Bluetooth module from the bottom cover a s sho wn in Fig. 30 Fig. 30 Bluetooth Modul e Removing the Speaker Assembly To remove the Sp ...
-
NEC E3100 - page 25
NEC VERSA E3100 Disassembly Manual Page 25 Notice The information in this guide is subject to change without notice. This guide contains information prote cted by copyright ac t. No part of this guide is to be photocopy or reproduced without written consent from NEC Computers Asia Pacific. NEC COMPUTER ASIA PACIFIC SHALL NOT BE LIABL E FOR TECHNICA ...
У вас вопрос, касающийся NEC E3100?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с NEC E3100, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с NEC E3100 со всей вероятностью он захочет поделиться методом ее решения.