-
Siemens 9000407137(8811) - page 1
en Instructions for use ...
-
Siemens 9000407137(8811) - page 2
...
-
Siemens 9000407137(8811) - page 3
en Index Safety instructions 4 . . . . . . . Delivery 4 . . . . . . . . . . . . . . . . . . . . Installation 4 . . . . . . . . . . . . . . . . . In daily use 4 . . . . . . . . . . . . . . . . . Children in the household 4 . . . . Childproof lock (door lock) 4 . . . . Damage 4 . . . . . . . . . . . . . . . . . . . Disposal 5 . . . . . . . . . . . . ...
-
Siemens 9000407137(8811) - page 4
en 4 Safety instructions Delivery Check the packaging and dishwasher immediately for damage caused in transit. Do not switch on a damaged appliance, but contact your supplier . Please dispose of the packaging material in an environmentally friendly manner . Do not let children play with packaging and its parts. There is a risk of suf fo- cation fro ...
-
Siemens 9000407137(8811) - page 5
en 5 Disposal Make redundant appliances unusable to prevent subsequent accidents. Dispose of the appliance in an environmentally friendly manner . W arning Children could become locked in the appliance (risk of suf focation) or find themselves in other dangerous situations. Therefore: Pull out the mains plug, sever and dispose of the power cord. De ...
-
Siemens 9000407137(8811) - page 6
en 6 Selecting language The language in the display window 12 can be set from to . “Deutsch” is the factory setting. Language Setting Deutsch L:01 English L:02 Français L:03 Nederlands L:04 Italiano L:05 ÅËËÇÍÉÊÁ L:06 Español L:07 Português L:08 Svenska L:09 Norsk L:10 Suomi L:1 1 Dansk L:12 Türkçe L:13 PYCCÅ L:14 Polski L:1 ...
-
Siemens 9000407137(8811) - page 7
en 7 W ater hardness table Salt Using salt Always refill with salt immediately before switching on the appliance. This ensures that overrun salt solution is immediately washed out and does not corrode the rinsing tank. Open the screw-type cap of the compartment 26 . Fill the tank with water (only required when switching on the appliance for the fir ...
-
Siemens 9000407137(8811) - page 8
en 8 Switching off salt refill indicator/water softening system If the salt refill indicator 5 is impaired (e.g. when using combined detergents containing salt component), it can be switched of f. Proceed as described under “Setting water softening system” and set the value to . The water softening system and salt refill indicator are now switc ...
-
Siemens 9000407137(8811) - page 9
en 9 Setting amount of rinse-aid The amount of rinse-aid dispensed can be set from to . The factory setting is . Do not change the amount of rinse-aid unless streaks (select lower setting) or water stains (select higher setting) are left on the utensils. Open the door . Switch on ON/OFF switch 1 . Hold down programme button A and press ST AR T butt ...
-
Siemens 9000407137(8811) - page 10
en 10 Loading the dishwasher Remove large food remnants. It is not necessary to prerinse utensils under running water . Place the utensils so that D they are secure and cannot tip over . D all utensils with their openings face down. D parts with curves or indentations are at an angle, thereby allowing water to drain. D does not obstruct rotation of ...
-
Siemens 9000407137(8811) - page 11
en 1 1 Cutlery drawer Arrange the cutlery in the cutlery drawer 21 as illustrated. Separately arranged utensils are easier to remove after washing. The drawer can be taken out. Small accessories holder * * depending on model Light-weight plastic accessories, e.g. cups, lids, etc. can be held securely in the small accessories holder . Adjusting the ...
-
Siemens 9000407137(8811) - page 12
en 12 Pull out the top basket 22 . T o lower the basket, press in the left and then the right lever on the outside of the basket. In doing so, hold the sides of the basket along the upper edge to prevent it from suddenly dropping. T o raise the basket, hold the basket on the sides of the upper edge and lift it up. Before re-inserting the basket aga ...
-
Siemens 9000407137(8811) - page 13
en 13 Adding detergent Pour detergent into the dispenser 30 (insert tablet flat, not on its edge). Dosage: see manufacturer ’s instructions on the packaging. Close the cover on the detergent dispenser by sliding it up until the lock engages without dif ficulty . The detergent dispenser opens automatically at the optimum time depending on the prog ...
-
Siemens 9000407137(8811) - page 14
en 14 Overview of programmes The max. possible number of programmes is illustrated in this overview . The corresponding programmes for your appliance can be found on the fascia. Programme T ype of utensils and soiling Programme sequence Possible additional options Auto 65 –75 Pots, utensils and cutlery Highly soiled Is optimised according ...
-
Siemens 9000407137(8811) - page 15
en 15 Additional options * depending on model Additional options 9 can be set with the buttons. Eco Option * W ater and energy consumption can be reduced with the “Eco Option” function. The running time is extended for optimum washing and drying results. Half load * If you have only a few items to wash (e.g. glasses, cups, plates), you can swit ...
-
Siemens 9000407137(8811) - page 16
en 16 Remaining running time display When the programme is selected, the remaining running time of the programme is indicated on the digital display 3 . The running time is determined during the programme by the water temperature, the number of utensils as well as the degree of soiling and may vary (depending on the selected programme). Display win ...
-
Siemens 9000407137(8811) - page 17
en 17 T o change the setting, press programme button C . Each time the button is pressed, the set value increases by one level; when the value of has been reached, the display jumps back to (of f). Press ST AR T button 10 , the set value is saved. Close the door . Switching off the appliance Short time after the end of the programme: Open the door ...
-
Siemens 9000407137(8811) - page 18
en 18 Interior light * 20 The interior light comes on when the door is opened irrespective of whether the ON/OFF switch 1 is switched on or of f. When the door is closed or ajar , the light is of f. Open the door . Switch on ON/OFF switch 1 . Hold down programme button A and press ST AR T button 10 until is indicated on the digital display . Releas ...
-
Siemens 9000407137(8811) - page 19
en 19 Filters The filters 27 keep large foreign objects in the rinsing water away from the pump. These foreign objects may occasionally block the filters. The filter system consists of a coarse filter , a flat fine filter and a microfilter . After each washing cycle check the filters for residue. Unscrew filter cylinder as illustrated and take out ...
-
Siemens 9000407137(8811) - page 20
en 20 W aste water pump Large food remnants in the rinsing water not retained by the filters may block the waste water pump. The rinsing water is then not pumped out and covers the filter . In this case: First disconnect the appliance from the power supply . Remove the filters 27 . Scoop out water , use a sponge if required. Using a spoon, prise of ...
-
Siemens 9000407137(8811) - page 21
en 21 Door cannot be closed. Door lock has been activated. T o reset, close the door with greater force. ... changing settings A setting cannot be changed, a programme starts. W rong programme button pressed. T erminate the programme (see chapter entitled “T erminating the programme (Reset)”) and start all over again. Y ou did not wait until pr ...
-
Siemens 9000407137(8811) - page 22
en 22 Filling valves making striking noises Caused by the installation of the water line and has no ef fect on the function of the machine. Remedial action is not possible. ... on the utensils Food residue on the utensils. Utensils placed too closely together , utensils basket overfilled. T oo little detergent. Rinse programme too weak. Spray arm r ...
-
Siemens 9000407137(8811) - page 23
en 23 Customer service If you are unable to rectify the fault, please contact your customer service. Y our nearest customer service centre can be found in the customer service list. When calling customer service, please quote the appliance number (1) and the FD number (2) which can be found on the rating plate 32 on the appliance door . FD 1 2 W ar ...
-
Siemens 9000407137(8811) - page 24
en 24 Do not install the appliance near heat sources (radiators, heat storage tanks, cookers or other appliances which generate heat) and do not install under a hob. After installing the appliance, ensure that the plug is easily accessible. Some models: The plastic housing on the water connection contains an electric valve, the connecting cables ar ...
-
Siemens 9000407137(8811) - page 25
en 25 Electrical connection Connect the appliance to an alternating current only , ranging from 220 V to 240 V and 50 Hz or 60 Hz via a correctly installed socket with protective earth conductor . See rating plate for required fusing 32 . The socket must be near the appliance and freely accessible following installation. The connection may be modif ...
-
Siemens 9000407137(8811) - page 26
en 26 W aste disposal Both the packaging of new appliances and the old appliances themselves contain valuable raw materials and recyclable materials. Please dispose of the individual parts separated according to type. Please ask your dealer or inquire at your local authority about current means of disposal. Packaging All plastic parts of the applia ...
-
Siemens 9000407137(8811) - page 27
en 27 en Subjekt to modification ...
-
Siemens 9000407137(8811) - page 28
40 Switch on the child-proof lock 41 Open the door with child-proof lock switched on 42 Switch of f the child-proof lock Always close the appliance door completely before leaving the appliance. Only in this way can you protect your children from potential hazards. Child-proof lock * Large sheets or grilles and plates which have a diameter greater t ...
-
Siemens 9000407137(8811) - page 29
AQUA-ST OP guarantee (does not apply to appliances without Aqua-Stop) In addition to warranty claims against the seller based on the purchase contract and in addition to our appliance warranty we will pay damages under the following conditions: 1. If our Aqua-St ...
У вас вопрос, касающийся Siemens 9000407137(8811)?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Siemens 9000407137(8811), задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Siemens 9000407137(8811) со всей вероятностью он захочет поделиться методом ее решения.