-
Renesas SH7145 - page 1
2004.1.29 SH7145 Group FP-144 F User System Interfa ce Board HS7145ECH61H User’s Manual Renesas M icrocomput er Developm ent Enviro nment System SuperH TM Family /SH7144 S eries Rev.4. 00 ...
-
Renesas SH7145 - page 2
Cautions Keep safety first in your circ uit designs! 1. Renesas Technology Corp. put s the maximum e ffort i nto making semi conductor pr oducts better and more reliable, but the re is always the possibility that trouble may occur with them. Trouble with semi conductors may l ead to personal i njury, fire or property dama ge. Remember to give due c ...
-
Renesas SH7145 - page 3
I IMPORTANT INFORMATION READ FIRST • READ this user's manual before using this u ser system interface cable. • KEEP the user's manual handy for future reference. Do not atte m pt to use the user system interface ca ble until you fully under stand its mec ha ni s m. User Syst em Interface Cable: Throughout thi s document, the ter m &qu ...
-
Renesas SH7145 - page 4
II LIMITED WARRANTY Renesas warrants its user system interface cabl es to be manufactured in accordance with published specifications and free from defects in material and/or workmanship. Renesas will re pair or replace any user system interfac e cables determined to be defective in material and/or workmanship. User s ystem interface cables are wea ...
-
Renesas SH7145 - page 5
III State Law: Some states do not allo w the exclusion or limitatio n of implied warranties or liabilit y for incidental o r consequential d amages, so t he ab o ve limitation or excl usion ma y not appl y to you. This warr ant y give s yo u spec if ic lega l rig hts, and you ma y have ot her rig hts wh ic h may va ry fro m state to state. The Warr ...
-
Renesas SH7145 - page 6
IV SAFETY PAGE READ FIRST • READ this user's manual before using this u ser system interface cable. • KEEP the user's manual handy for future reference. Do not atte m pt to use the user system interface ca ble until you fully under stand its mec ha ni s m. DEFINITION OF SI GNAL WORDS This is the safet y alert symbol. It is used to ale ...
-
Renesas SH7145 - page 7
V W ARNING Observe the pr ecautions listed below. Failure to do so will result in a FIRE HA ZARD and will damag e the user system and the emula tor product or will result in PERSONAL INJURY. Th e USER PROGRAM will be LOST. 1. Do not repair or remodel the emulator product b y yourself for e lectric shock pr evention and qualit y assurance. 2. Always ...
-
Renesas SH7145 - page 8
i Preface The HS7145ECH61H is a u ser sys tem in terface board that conn ects a user s ystem for th e SH7145 FP-144F pack age to the S H7046 E6000H emu lator (HS7046EPH60H). ...
-
Renesas SH7145 - page 9
ii Contents Section 1 Configuration ..................................................................................... 1 Section 2 Environmental Conditions ................................................................. 3 2.1 Setting Operating Voltage and Operating Frequency ....................................................... 3 Section 3 P ...
-
Renesas SH7145 - page 10
1 Section 1 Configuration Figure 1 and table 1 sh ow th e configu ration and com ponents of th e user system interf ace board for the FP-144F package. Please m ake su re you have all of these com ponents wh en unpack ing. Socket cover Screws (M2.0 x 6 mm) EV-chip board Board User system Spacer IC socket Screws (M2.0 x 10 mm) Figure 1 User Sys tem I ...
-
Renesas SH7145 - page 11
2 CAUTION Use a NQPACK144SD socket (manufactured by Tokyo Eletech Corporation ) for the FP-144F package IC socket on the user system. Table 1 HS7145ECH61H Compon ents No. Component Quantity Remarks 1 Board 1 With two spacers (2.6MP x 6 m m) 2 IC socket 1 For the FP-144F package (to be mounted on the user system) 3 Socket cover 1 For the FP-144F pac ...
-
Renesas SH7145 - page 12
3 Section 2 Environm ental Conditions Maintain the conditions in tab le 2 wh en using the emulator. Table 2 Environmental Conditio ns Item Specifications Temperature Operating: +10 to +35°C Storage: -10 to +35°C Humidity Operating: 35 to 80% RH, no condensation Storage: 35 to 80% RH, no condensation Vibration Operating: 2.45 m/s m ax. Storage: 4. ...
-
Renesas SH7145 - page 13
4 Section 3 Product Specifications The specifications of this product are show n in table 3. Table 3 Product Specifications Item Specifications Target processor SH7145F Package FP-144F Function Level limitation: This function keeps the output signal from 3-V emulator system equal to or less than power supply voltage of the user system (Vcc). User-s ...
-
Renesas SH7145 - page 14
5 Section 4 User Interface Specifications The user sy stem interface board incorporates a lev el conversion circuit supporting a low- voltage circuit. Accordin gly , when connecting the user sy stem to th e emul ator, pay attention to the signal delays an d the num ber of FA NINs and FANOUTs. 4.1 User System Interface Circu it The user system inter ...
-
Renesas SH7145 - page 15
6 (3) AVcc, AVss, AN7 to AN0, and AVref Emulator User system Emulator User system AN7 to AN0 Vss A Vss QS3384 5Vcc A Vcc Figure 5 User System Interface Circuit for AVcc, AVss, AN7 to AN0, and AVref (4) Other dig ital sig nals Emulator User system QSVcc Figure 6 User System Interface Circuit for Other Digital Signals ...
-
Renesas SH7145 - page 16
7 (5) UVcc and UVss Emulator User system QSVcc Vss UVss UVcc V oltage detection circuit 5Vcc Figure 7 User System Interface Circuit for UVcc and UVss Note: UVcc and UVss represent Vcc and Vss on a user system. 5Vcc and QSVcc represent Vcc generated in the user system interface cable. ...
-
Renesas SH7145 - page 17
8 Section 5 Connection Procedures 5.1 Connectin g User System Interface Board to User S ystem W ARNING Always switch OFF the user syst em and the emulator product before the USER SYSTEM INTERFACE BOARD is connected to or removed from any part . Before connecting, make sure that pin 1 on bot h sides are correctly aligned. Failure to do so will resul ...
-
Renesas SH7145 - page 18
9 5.1.2 Installing Cable Hea d CAUTION Check the location of pin 1 before inserting. Alig n pin 1 on the IC s ocket for an FP-144F packag e on the u ser sy stem w ith pin 1 on the u ser system interface board, an d insert the us er system interface board into th e IC socket on th e user system , as shown in figure 8. 5.1.3 Fas tening Cable Head CAU ...
-
Renesas SH7145 - page 19
10 Screws (M2.0 x 10 mm) Pin 1 Board IC socket (NQPACK144SD manufactured by Tokyo Eletech Corporation) User system Figure 8 Connecting User System Interface Board to User System ...
-
Renesas SH7145 - page 20
11 5.2 Connecting User System Interface Board to EV-Chip Board W ARNING Observe the precautions listed below. Failure t o do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST. 1. Always switch OFF the user syst em and the emulator product before ...
-
Renesas SH7145 - page 21
12 Connector No. UCN1 UCN1 UCN2 UCN2 Board EV-Chip Board Connector No. Board Connector No. EV-chip board Spacer User system Figure 9 Connecting User System Interface Board to EV-Chip Board ...
-
Renesas SH7145 - page 22
13 5.3 Reco mm ended Dim ensions for User System Mount Pa d (Footpr int) Figure 10 show s the recom m ended dimen sions for the m ount pad (f ootprint) for the u ser system w ith an IC s ocket for an F P-144F package (NQPA CK144SD: m anuf actured by Tokyo Eletech Corporatio n). No te that the dimensions in figure 10 are somew hat different f rom th ...
-
Renesas SH7145 - page 23
14 5.4 Dim ensions for EV-Chip Boar d and User Syste m Inte rface Board The dimens ions for the EV- chip board and the u ser system interf ace board are shown in figu re 11. 140.0 116.0 Unit: mm Tolerance: ±0.5 mm EV-chip board User system interface board 19.5 31.0 33.5 16.0 100.0 92.0 69.0 29.5 5.0 34.5 Spacer Figure 11 Dim ensions for EV-Chip Bo ...
-
Renesas SH7145 - page 24
15 5.5 Resulting Di mensions after Conn ecting User System Interface B oard The resulting dim ensions, af ter connecting th e user system interf ace board to the user sy stem, are shown in figure 12 . EV-chip board 11.5 Unit: mm Tolerance: ±1.0 mm User system 31.0 29.5 29.5 31.0 Spacer ( φ 6.0) 35.2 IC socket (NQPACK144SD manufactured by Tokyo El ...
-
Renesas SH7145 - page 25
16 Section 6 Installing the MCU to the User System CAUTION 1. Check the locat ion of pin 1 before inserting. 2. Use a Philips-type screwdriver whose head matches the screw head. 3. The tightening torque must be 0.054 N•m or less. If the applied torque cannot be accurately measured, stop tightening when th e force required to turn t he screw becom ...
-
Renesas SH7145 - page 26
17 MCU (SH7145) Screws (M2.0 x 6 mm) Socket cover Pin 1 User system IC socket (NQPACK144SD manufactured by Tokyo Eletech Corporation) Figure 13 Installing M CU to User System ...
-
Renesas SH7145 - page 27
18 Section 7 Verifying Operation 1. Turn on the em ulator accordin g to the procedures described in the SH 7046 E6000H Emul ator User's Manual (HS 7046EPH60HE). 2. Verify th e user sy stem interf ace cable connections by checking the pin states w ith the exten ded monitor an d checking the bus states w ith the FIL L com mand (em ulator com man ...
-
Renesas SH7145 - page 28
19 To use the crystal oscillator mounted on the EV-chip board Install a crystal oscillator into the crys tal oscillator terminals on the EV-chip board. Evaluation chip board Crystal oscillator terminals Crystal oscillator Enlarged view X1 X2 Figure 15 Installing the Clo ck Oscillator ...
-
Renesas SH7145 - page 29
20 Section 8 Notice 1. Before connectin g any parts or cables, make su re that pin 1 on th e both sides are correctly aligned. 2. Do not apply excessive force to the u ser system interface board w hile it is con nected to the user system . 3. The dimen sions of th e recomm ended m ount pad for the IC socket for this us er system interface board are ...
-
Renesas SH7145 - page 30
SH7145 Group FP-144F User System Interface Board HS7145ECH61H User's Manual Publication Date: Rev.4.00, January 29, 2004 Published by: Sales Strategic Planning Div. Renesas Technology Corp. Edited by: Technical Documentation & Information Department Renesas Kodaira Semiconductor Co., Ltd. 2004 Renesas Technology Corp. All rights reserv ...
-
Renesas SH7145 - page 31
SH7145 Group F P-144F User Sy stem Inte rface B oard HS7145E C H61H U ser’ s Manual REJ10B0037-0400H ...
У вас вопрос, касающийся Renesas SH7145?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Renesas SH7145, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Renesas SH7145 со всей вероятностью он захочет поделиться методом ее решения.