-
Yamaha AX-1070 - page 1
IMPORTANT! Please record the serial number of this unit in the space below. Model: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN ...
-
Yamaha AX-1070 - page 2
1 Read Instructions – All the safety and operating instructions should be read before the unit is operated. 2 Retain Instructions – The safety and operating instructions should be retained for future reference. 3 Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to. 4 Follow Instructions – All oper ...
-
Yamaha AX-1070 - page 3
FCC INFORMATION 3 YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing ...
-
Yamaha AX-1070 - page 4
4 CONNECTIONS ● Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other components to which connections are being made. ● When making connections between this unit and other components, be sure all connections are made correctly, that is to say L (left) to L , R (right) ...
-
Yamaha AX-1070 - page 5
5 English * : Refer to “ ABOUT THE ACCESSORY TERMINALS ” on page 6. < AX-870 > Compact disc player Tuner Tape deck 1 Tape deck 2 Video cassette player, LD player, etc. Turntable (General model) To AC outlet Speakers A Left Speakers B Right Left Right ...
-
Yamaha AX-1070 - page 6
6 Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is, + and – markings are observed. If these wires are reversed, the sound will be unnatural and will l ...
-
Yamaha AX-1070 - page 7
English 7 OPERA TIONS T O PLA Y A SOURCE 1 Set to the “ ∞ ” position. 2 3 Select a desired input source. * If you select turntable as an input source (PHONO position), refer to “Setting the PHONO switch” on page 11. 4 Select the speakers to be used. * If you use two speaker systems, press both the A and B switches. 5 Play the source. 6 Ad ...
-
Yamaha AX-1070 - page 8
Notes ● If you want to enjoy another source while recording, select it with the INPUT selector. ● VOLUME , BASS , TREBLE , BALANCE , LOUDNESS controls and PURE DIRECT switch settings have no effect on the material being recorded. T O RECORD A SOURCE T O T APE (OR DUB FROM A T APE T O ANO THER) 1 Select the source to be recorded. 2 Play the sour ...
-
Yamaha AX-1070 - page 9
9 English REC OUT selector setting on tape dubbing < AX-1070 >< AX-870 > To dub from tape deck 1 to tape deck 2 or 3 (or both tape deck 2 and 3 at the same time) To dub from tape deck 3 to tape deck 1 or 2 (or both tape deck 1 and 2 at the same time) To dub from tape deck 1 to tape deck 2 To dub from tape deck 2 to tape deck 1 * Tape du ...
-
Yamaha AX-1070 - page 10
10 Adjusting the B ASS and TREBLE controls Adjusting the B ALANCE control Selecting the SPEAKER system Adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused from speaker location or listening room conditions. Because one or two speaker systems can be connected to this unit, the SPEAKERS swit ...
-
Yamaha AX-1070 - page 11
11 English When y ou listen with headphones Connect the headphones to the PHONES jack. When listening with headphones privately, set both the SPEAKERS A and B switches to the OFF position. Using the PURE DIRECT switc h You can enjoy the purest possible sound from your audio sources by setting this switch so that the indicator illuminates. By doing ...
-
Yamaha AX-1070 - page 12
12 REMO TE CONTR OL TRANSMITTER The remote control transmitter provided with this unit is designed to control all the most commonly used functions of the unit. If the CD player, tuner, turntable, equalizer, and tape deck connected to this unit are YAMAHA components, then this remote control transmitter will also control various functions of each co ...
-
Yamaha AX-1070 - page 13
13 English NO TES ABOUT THE REMO TE CONTROL TRANSMITTER Battery installation Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes ● Use only AA, R6, UM-3 batteries for replacement. ● Be sure the polarities are correct. (See t ...
-
Yamaha AX-1070 - page 14
14 If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. TR OUBLESHOO TING SYMPT ...
-
Yamaha AX-1070 - page 15
15 English 15 SPECIFICA TIONS Minimum RMS Output Power per Channel < AX-1070 > 8 ohms, 20 Hz to 20 kHz, 0.01% THD ...............................................145W+145W 6 ohms, 20 Hz to 20 kHz, 0.02% THD ...............................................185W+185W < AX-870 > 8 ohms, 20 Hz to 20 kHz, 0.015% THD ............................ ...
-
Yamaha AX-1070 - page 16
YAMAHA ELECTRONICS CORPORATION, US A 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD . 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H . SIEMENSSTR. 22-34, D-25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A . RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOUR ...
У вас вопрос, касающийся Yamaha AX-1070?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Yamaha AX-1070, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Yamaha AX-1070 со всей вероятностью он захочет поделиться методом ее решения.