-
Pioneer DJM-1000 - page 1
Operating Instructions DJ MIXER DJM-1000 ...
-
Pioneer DJM-1000 - page 2
2 The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated &qu ...
-
Pioneer DJM-1000 - page 3
3 FEATURES CONTENTS 1 High sound quality design Analog signals are transmitted via the shortest path and converted to digital signals by a 96 kHz sampling, 24 bit, high-quality A/D converter, thus passing the signals to the digital mixing stage under optimum conditions. Through the use of a 32 bit DSP, mixing is achieved with zero sound quality deg ...
-
Pioneer DJM-1000 - page 4
4 Location Install the unit in a well-ventilated location where it will not be exposed to high temperatures or humidity. ÷ Do not install the unit in a location which is exposed to direct rays of the sun, or near stoves or radiators. Excessive heat can adversely affect the cabinet and internal components. Installation of the unit in a damp or dust ...
-
Pioneer DJM-1000 - page 5
5 BEFORE USING (CONNECTIONS) CONNECTION PANEL MIDI OUT INPUT OUTPUT PO WER AC IN VISUAL (MONO) (MONO) (MONO) L L L R R L R R 2 RETURN 1 EFX 1 EFX 2 CONTROL SOUND 1 2 SEND 1 SIGNAL GND. PHONO LINE (MONO) L R LINE (MONO) L R LINE (MONO) L R LINE 1 SIGNAL GND. SIGNAL GND. L R CONTROL SOUND 2 PHONO 2 L R CONTROL DIGIT AL PHONO 3 L R CONTROL DIGIT AL PH ...
-
Pioneer DJM-1000 - page 6
6 BEFORE USING (CONNECTIONS) Before making or changing connections, switch off the power and disconnect the power cord from the AC outlet. POWER CORD CONNECTION Connect the power cord last. ÷ When all other connections are completed, connect the supplied power cord to the AC inlet located on the rear panel of this unit, and connect the power plug ...
-
Pioneer DJM-1000 - page 7
7 BEFORE USING (CONNECTIONS) CONNECTING TO THE EFFECTOR AND OUTPUT CONNECTORS Master output There is an XLR plug correspondent balanced output MASTER 1, and a RCA plug correspondent unbalanced output MASTER 2. Set the output level using the MASTER ATT. dial to match the input sensitivity of the connected power amplifier. Booth monitor output Unbala ...
-
Pioneer DJM-1000 - page 8
8 BEFORE USING (CONNECTIONS) CONNECTING MICROPHONES, HEADPHONES Headphones Headphones with Ø6.3 mm stereo phone plugs can be connected to the PHONES plug in the operation panel (top panel). Main microphone A microphone with either a Ø6.3 mm phone plug or XLR plug can be connected to the MIC plug in the operation panel (top panel). Sub microphone ...
-
Pioneer DJM-1000 - page 9
9 BEFORE USING (PART NAMES AND FUNCTIONS) Operation Panel 0 +9 – 6+ 6 – 26 +6 – 26 +6 – 26 +6 A THRU B – 6 OFF MIN MAX LEVEL ON CH F ADER CROSS F ADER CROSS F ADER ASSIGN PROFESSIONAL 6 CHANNEL MIXER ON LEVEL MIN MAX ON T ALK OVE R +6 VISUAL EFX 1 CH-1 CH-2 CH-3 CH-4 CH-5 CH-6 EFX 2 SOUND 1 TRIM HI EQ MID LOW LOW MIC CUE CUE CUE HI MIC LE ...
-
Pioneer DJM-1000 - page 10
10 BEFORE USING (PART NAMES AND FUNCTIONS) 8. Channel 2 input selector switch SOUND 2: Dedicated input for DJ CD players supporting digital link (mini DIN connector). LINE: Phone type connector (when a monaural signal is connected to only the L channel, the signal is input to both L and R channels). CD/LINE: RCA type connector with line level input ...
-
Pioneer DJM-1000 - page 11
11 BEFORE USING (PART NAMES AND FUNCTIONS) 24. Cross fader assign B indicator (B) Lights green when power is ON. 25. Channel fader slider Adjusts volume of each channel. (Adjustable range: – ∞ to 0 dB) Outputs according to the channel fader curve set by the CURVE ADJUST dial (CH FADER). Master output control section 26. MASTER fader slider Adju ...
-
Pioneer DJM-1000 - page 12
12 BEFORE USING (PART NAMES AND FUNCTIONS) Input EQ CH F ADER CROSS F ADER MASTER F ADER SEND RETURN S/R ON S/R LEVEL Output [AUX type] 41. SEND channel selector switches Use to select the send audio from MIC, channels 1-6, and MASTER. 42. RETURN input level adjust dials (LEVEL) Adjusts the level of the signal returned. (Adjustable range: – ∞ t ...
-
Pioneer DJM-1000 - page 13
13 OPERATIONS 1. Set the POWER switch located on the rear panel (con- nection panel) to ON. 2. Set the input selector switches for the channels used to the devices connected to those channels. 3. Use the TRIM dial to adjust the input level. 4. Adjust the tone using the EQ dials (HI, MID, LOW). 5. Adjust the volume of the channel with the channel fa ...
-
Pioneer DJM-1000 - page 14
14 OPERATIONS FADER START FUNCTION By using a control cable to connect the unit to an optional PIONEER CD player, playback on the CD player can be started using the channel fader or cross fader functions (if a digital link connection is made, use of the control cable is unnecessary). The CD player ’ s pause function is canceled when the mixer ’ ...
-
Pioneer DJM-1000 - page 15
15 OPERATIONS DIGITAL LINK FUNCTION Link system diagram –26 +6 SOUND 1 SOUND 2 EFX 1 (2) VISU AL DJM-1000 EFX-1000 DJ effecter supporting digital link DJ CD player supporting digital link AV mixer supporting digital link DJ CD player supporting digital link Fader effect link (EFX link) Audio signal BPM link (Sound Link) Audio signal Audio signal ...
-
Pioneer DJM-1000 - page 16
16 OTHER (TROUBLESHOOTING) TROUBLESHOOTING Incorrect operations are often mistaken for trouble and malfunctions. If you think there is something wrong with this component, check the points below . Sometimes the trouble may originate from another component. Thus, also check the other electrical appli- ances also in use. If the trouble cannot be rect ...
-
Pioneer DJM-1000 - page 17
17 OTHER (SPECIFICATIONS) SPECIFICATIONS 1. General Specifications Power supply voltage ............................................... AC 120 V, 60 Hz Power consumption .................................................................... 63 W Operating temperature ................... +5 ˚C to +35˚C (+41 ˚F to +95˚F) Operating humidity ........ ...
-
Pioneer DJM-1000 - page 18
18 OTHER (BLOCK DIAGRAM) BLOCK DIAGRAM Mono Split Stereo Stereo Mono Split Send Ret1 Pre CHn Send Ret1 Pre CHn Send Ret2 Pre CHn Send Ret1 Post CHn Send Ret2 Post CHn Send Ret1 Aux CHn Send Ret2 Aux CHn Send Ret1 Pre MIC Send Ret2 Pre MIC Send Ret1 Post MIC Send Ret2 Post MIC Send Ret1 Aux MIC Send Ret2 Aux MIC Send Ret1 Pre Mast Send Ret2 Pre Mast ...
-
Pioneer DJM-1000 - page 19
19 ...
-
Pioneer DJM-1000 - page 20
Published by Pioneer Corporation. Copyright © 2004 Pioneer Corporation. All rights reserved. PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. Industrial Products Depar ...
У вас вопрос, касающийся Pioneer DJM-1000?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Pioneer DJM-1000, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Pioneer DJM-1000 со всей вероятностью он захочет поделиться методом ее решения.