-
NEC PF32W503 - page 1
INSTRUCTION MANUAL Colour T elevision PF32W503 1 T able of contents Safeguards 2 INTRODUCTION Features 3 Installation 3 To connect the aerial 4 To prepare the remote control 4 Identification of controls 5 Remote control 7 T urning the Power ON/OFF 8 Turing the power on/off 8 Auto power off 8 Last mode menory 8 T uning the TV channels 9 Auto setup s ...
-
NEC PF32W503 - page 2
2 SAFEGUARDS To operate your receiver at the peak performance, please read this Instruction Manual carefully and retain it for the future reference. M Water and Moisture : Never install the set in the following places : in the bathroom, in a wet basement(Dripping or splashing water). M Heat : Never place the set near sources(e.q. radiator). M Venti ...
-
NEC PF32W503 - page 3
4 T o connect the aerial T o prepare the remote control INST ALLA TION Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and positioning of the aerial will depend upon your particular area. Notes M When using an outdoor aerial, disconnect the leads of the indoor aerial, if ...
-
NEC PF32W503 - page 4
6 BACK A/V OUTPUT TERMINAL This always provides with TV signal output of the selected channel. Video 1 input terminals or DVD input terminals TOP VIDEO 2(SCART JACK) input / output terminal (SCART does not supports S-VIDEO) A/V OUT OF SCART TERMINAL will provide with TV signal output of the selected channel. (2) Under this button pressed once, TV g ...
-
NEC PF32W503 - page 5
TURNING THE POWER ON / OFF The following describes how to turn the TV on / off using the main switch and the remote control. < To turn the power on / off > 1. Press the main power switch. The power indicator lit up red or amber. In displays the standby mode that the power indicator lit up red. 2. If no picture appears, press the “POWER ON / ...
-
NEC PF32W503 - page 6
10 EDIT 1. Press the menu button to select INSTALL. 2. Press the C / B buttons and then INSTALL SYSTEM. 3 . Select EDIT with the PR y / x buttons and press the C / B buttons to start EDIT. 4. DELETE PROGRAM POSITION DATA. Position the blue-line to the program to delete with the PR y / x buttons and the DELETE button. 5. CHANGING THE ORDER OF THE CH ...
-
NEC PF32W503 - page 7
12 TO SELECT THE PANORAMA OR ZOOM 1~ZOOM 4 SCREEN 1. By pressing the WIDE / ZOOM button in remote control, the following seven modes change cyclically. 2 . Or press the MENU button to FEATURES. 3. And then to be displayed on the right appearance. Select the ZOOM with the PR y / x buttons. 4. By pressing the C / B buttons, the following seven mode c ...
-
NEC PF32W503 - page 8
14 TO SELECT THE SOUND MODE 1. Press the SELECTABLE SOUND ( ) button to select the desired sound quality. NORMAL, FAVOURITE, MUSIC, SPEECH can be selected cyclically. 2. Or press the MENU button to select the SOUND and then to be displayed on the right appearance. Select the PRESET with the PR y / x buttons. By pressing the C / B buttons, the follo ...
-
NEC PF32W503 - page 9
16 STEREO PROGRAMS Press the STEREO / BILINGUAL SELECT ( )button to select to nicam- stereo / mono mode. BILINGUAL PROGRAMS 1. When a bilingual program is received DUAL 1, DUAL 2 appears. 2. Press the STEREO / BILINGUAL SELECT button to be heard. The sound differs according to transmission system : DUAL 1 and DUAL 2 appear cyclically on the screen. ...
-
NEC PF32W503 - page 10
18 TO TURN ON THE TV AUTOMATICALLY(WAKE TIME) With the CLOCK, the WAKE TIME, the WAKE PR. Preset, the TV will automatically turn on to a preset program number at a reset time. Set the timer ON. Select the WAKE TIME with PR y / x buttons. Then, press direct key(0~9) to set the wake up time. TO TURN OFF THE TV AUTOMATIC(OFF TIME) With the CLOCK and t ...
-
NEC PF32W503 - page 11
20 TO SELECT THE SCREEN COLOR When no signal is being received, the TV will automatically turn blue or red at the time SCREEN BLUE or SCREEN RED on. 1. Press the MENU button to select the FEATURES and then to be displayed on the right appearance. Press PR y / x buttons to select the SCREEN. 2. Press the C / B buttons to change OFF, BLUE and RED. TO ...
-
NEC PF32W503 - page 12
22 W A TCHING PICTURE IN PICTURE The unit is capable of displaying two picture with the small sub picture simultaneously. This is called the Picture-In-Picture function. A TV picture or a picture from external source equipment such as a VTR can be displayed as another picture. PIP MODE SUB CH DOWN SUB CH UP SUB TV / VIDEO SUB POSITION SW AP STILL 2 ...
-
NEC PF32W503 - page 13
24 TO SWITCH THE MAIN AND SUB-PICTURE OF THE PIP Press the SWAP button when a picture-in-picture is displayed. The main picture(the large picture) and sub-picture(the small picture) are switched. Press the SWAP button again to switch again. TO FREEZE THE SUB-PICTURE Press the STILL button when a sub-picture is displayed. The Sub- picture will be a ...
-
NEC PF32W503 - page 14
26 CONNECTING VIDEO L When connecting the VIDEO to the back of the TV 1. Prepare the connective plug for picture / sound. 2. Connect the VIDEO picture output terminal with the TV picture input terminal. 3. Connect the VIDEO sound output terminal with the TV sound input terminal. 4. Press the TV / VIDEO / DVD( ) button on the Remote control and sele ...
-
NEC PF32W503 - page 15
28 CONNECTING WITH S PICTURE VIDEO VIDEO AUDIO R L S-VIDEO SOUND OUTPUT S-PICTURE OUTPUT HI-FI STEREO VIDEO L Side Connector M To watch TV in clear field by inputting S picture. When repeating high-quality field VIDEO, you can enjoy clear and sharp picture by connecting it with TV S-VHS terminal. 1. Connect S-VHS connective plug with S-VHS output t ...
-
NEC PF32W503 - page 16
30 CONNECTING WITH AUDIO SET M When listening to sound in powerful AUDIO, while watching the picture on TV. M Connect external input terminal of AUDIO to right & left sound output of TV signal. RIGHT LEFT M When connecting other equipment, please ensure you turn the main switch OFF to prevent any damage to the equipment. 31 BROADCAST TRANSMISSI ...
-
NEC PF32W503 - page 17
32 TO SELECT THE TEXT MODE First, turn on your TV SET and choose your TV program. Then press the TEXT( )button to switch the receiver to Teletext mode. To select any other page, simply press the three of the PAGE SELECTOR buttons or PR y / x buttons. The page number requested is displayed on the upper left hand side of the screen. To return to norm ...
-
NEC PF32W503 - page 18
34 SPECIFICA TION TV Standard Color system Sound system Rated voltage Sound Output Power Channel Coverage T uning System Program No. Indication Program Selection Aux. T erminal Power consumption PA L / SECAM, NTSC 3.58 / 4.43(A V) B / G, D / K, I, H 1 10-240V~, 50 / 60Hz 8W X 8W HYPER BAND CA TV VHF L : E2(48.25MHz)~S6(147.25MHz) VHF H : S7(147.25M ...
У вас вопрос, касающийся NEC PF32W503?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с NEC PF32W503, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с NEC PF32W503 со всей вероятностью он захочет поделиться методом ее решения.