Deutsch dropdown-ico

Bedienungsanleitung Konica Minolta PULSOX-300i

40 Seiten 1.75 mb
Download

Zur Seite of 40

Summary
  • Konica Minolta PULSOX-300i - page 1

    OXYGEN SA TURA TION MONITOR PULSOX -300i ® Instruction Manual This instrument must be used according to the instructions of the doctor . ...

  • Konica Minolta PULSOX-300i - page 2

    Safety Symbols W arnings and precautions noted in this manual and the instrument are indicated by the following markings, designed to prevent accidents caused by erroneous handling of the equipment. This indicates text consisting of a warning or precaution relating to safety . Please read the text carefully and use the equipment safely . This indic ...

  • Konica Minolta PULSOX-300i - page 3

    1 Foreword Safety Precautions T o ens ure correct use of th is instrument, read th e following points carefully and adhere to them. After you have read this manual, keep it in a safe place where it can be referred to anytime a question arises. W ARNING (Failure to adhere to the following points may result in death or serious injury .) The instrumen ...

  • Konica Minolta PULSOX-300i - page 4

    2 Foreword CAUTION (Failure to adhere to the following points may result in injury or damage to the in - strument or other property .) Do not use batteries other than those specified by KONICA MINOL T A SENSING, INC. When installing batteries in the instrument, make sure that they are correctly oriented according to the mark. If alkali uid from ...

  • Konica Minolta PULSOX-300i - page 5

    3 Foreword Contents Safety Symbols Safety Precautions .............................................................1 Foreword ............................................................................4 Safety Notes ........................................................................... 4 Package Contents....................................... ...

  • Konica Minolta PULSOX-300i - page 6

    4 Foreword Foreword Safety Notes CAUTION: U.S.Federal law restricts this device to sale by or on the order of a physician. The instrument is designed for measurement of the oxygen saturation (SpO 2 ) of arterial blood and the pulse rate. Do not use it for any other purposes, such as warning of sleep apnea and breathing abnormalities. The Oxygen Sat ...

  • Konica Minolta PULSOX-300i - page 7

    5 Foreword Package Contents Before using the instrument, make sure that the following items are present. 1) PULSOX-300i main body × 1 2) Wristband WB-300 × 1 3) AAA-size alkaline battery × 1 4) Instruction manuals • PULSOX-300i instruction manual × 1 • Separate manual (Using manual for Probes) × 1 ✻ The probe is optional. About Probe The ...

  • Konica Minolta PULSOX-300i - page 8

    6 Foreword System Diagrams and Accessories The instrument consists of the following items. 05,3/ 8I Optional accessories Standard accessories Wristband WB-300 AAA-size alkaline battery Finger Clip Probe SR-5C Spot Check Probe SP-5C Monitor Probe LM-5C Personal Probe SD-5C Extension cable EC-300 USB adapter UA-300 Standard accessories Op ...

  • Konica Minolta PULSOX-300i - page 9

    7 Foreword Names of Parts PULSOX-300i Power button LCD Display Backlight button Probe connector Wristband Battery cover External output terminal Used to start measurement (Power-ON) or end measurement (Power-OFF). Measurement results and messages are displayed. Connect the probe or extension cable EC-300 to this connector . Press it to turn ON the ...

  • Konica Minolta PULSOX-300i - page 10

    8 Foreword Notes on Use • This instrument should be used under the following operat - ing conditions. • T emperature of 0 to 40°C (32 to 104°F), relative humidity of 30 to 85%, with no condensation. • Atmospheric pressure of 700 to 1060 hPa (altitude of – 400 to 3000m). • This is a precision instrument. T o avoid the possibility of it b ...

  • Konica Minolta PULSOX-300i - page 11

    9 Foreword Differenc e f ro m t he SaO 2 value to displayed value <T able 1> <T able 2> SaO 2 HbCO SaO 2 Methemoglobin 1% 5% 10% 1% 5% 10% 50 50 70 70 90 90 100 100 Measured value is always lower than th e a ctual value. Displayed value is sometimes higher than th e a ctual value if SaO 2 is around 50%. -0.1 -0.7 -1.5 +0.2 +1.3 +3.2 -0. ...

  • Konica Minolta PULSOX-300i - page 12

    10 Foreword Notes on Storage • This instrument should be stored under the following storage conditions. • T emperature of –10 to 60°C (14 to 140°F), relative humid- ity of 10 to 95%, with no condensation. • Atmospheric pressure of 700 to 1060 hPa (altitude of –400 to 3000m). • When storing the instrument: • Do not store the instrume ...

  • Konica Minolta PULSOX-300i - page 13

    11 Foreword Disposal Method • When disposing of the used battery , insulate the polarity ter - minals with insulating tape etc. If the terminals of the battery come into contact with metal objects, heat generation, explo- sion or re may result. • Make sure that the battery is either disposed of or recycled correctly in accordance with local ...

  • Konica Minolta PULSOX-300i - page 14

    12 Preparations Preparations Before starting measurements using this instrument, follow the procedure given below to ensure that measurements are stable. 1) Attaching the W rist Band Attach the Wrist Band WB-300 (supplied as a standard accessory) to the instrument. Since the WB-300 is made of elastic material, it allows for exibility and comfort ...

  • Konica Minolta PULSOX-300i - page 15

    13 Preparations 4 Pass the other end of the band outward through band xture B. ◆  T ake care not to twist the band. 5 Fold back and secure the band with the hook- and-loop tape section. ◆  When attaching the instrument to an arm, adjust the band length and fitting at this hook- and-loop tape section. 3 Fold up the inserted hook-and-loo ...

  • Konica Minolta PULSOX-300i - page 16

    14 Preparations 2) Connecting the probe Connect the probe’s connector plug into the Probe Connector on the instrument. ◆ Make sure that probe’s connector plug is oriented correctly . ◆ Do not connect it in with excessive force. Doing so may damage the connector . ◆  Do not touch the connector terminals by hand. Contact failure may o ...

  • Konica Minolta PULSOX-300i - page 17

    15 Preparations 3) Installing the battery 1 T urn the battery cover clockwise approximately 90 degrees to open the cover . ◆  When turning the cover , keep the flat part of your finger on the cover ’ s catch. This facilitates opening the cover with minimum force. 2 Insert the battery into the battery compartment according to the polarity mar ...

  • Konica Minolta PULSOX-300i - page 18

    16 Preparations 4) Attaching the PULSOX to the Wrist 1 Remove the hook-and- loop section of the band from the side with no probe connector . 2 Attach PULSOX-300i to the arm by inserting your hand through the Wrist Band. 3 Adjust the fastening position of the hook-and- loop tape to adjust the tension of the Band. ...

  • Konica Minolta PULSOX-300i - page 19

    17 Measurement Measurement 1) Starting the Measurement 1 Connect the probe to the PULSOX-300i correctly . 2 Press the Power button for a long time, the Power is ON, the backlight is ON, and all the elements on the display is displayed. ◆  After 30 seconds since the Power is ON, the Backlight is OFF automatically . 3 As shown the right, the set ...

  • Konica Minolta PULSOX-300i - page 20

    18 Measurement 4 Next, it will cause the file number of the next measurement to appear . ◆  The measurement data obtained from power-ON (start of measurement) up to power-OFF (end of measurement) will be stored in one le. 5 And, if the time for Auto- Power-Off was set in the instrument, the setting time is displayed. ◆  The time for Au ...

  • Konica Minolta PULSOX-300i - page 21

    19 Measurement 2) Reading the display When the instrument is turned ON, all the elements of the LCD will light up. The pulse level, pulse rate and SpO 2 value are displayed during measurement. Pulse rate (P .R.) If an error occurs, an error message mainly about P .R. will be displayed. Battery mark Indicates the remain ing batter y capacity in thre ...

  • Konica Minolta PULSOX-300i - page 22

    20 Measurement 3) Ending the Measurement About Auto-Power-Off function By connecting the instrument to a personal computer and using the optional software, the time to be elapsed from power-on (start of measurement) to power-of f (end of measurement) can be set as the auto-power-off timer . If an auto-power-off timer is set, the measurement is n ...

  • Konica Minolta PULSOX-300i - page 23

    21 Ext.Connect External Connection The PULSOX-300i has an external output terminal for outputting measurement data stored in the instrument's memory to a computer . In addition, when the Data Analyzing Software is installed on the computer and the PULSOX-300i is connected to the computer using UA-300, the date and/or Auto- power-off timer (whi ...

  • Konica Minolta PULSOX-300i - page 24

    22 Ext.Connect <Regarding the display in communication mode> ● When the PULSOX-300i is connected to a computer , the PULSOX-300i will enter UA communication mode automatically . In UA communication mode, the display will appear as shown below: <Notes on communication mode> ● It is impossible to take measurements while the inst ...

  • Konica Minolta PULSOX-300i - page 25

    23 Check Points T rouble Shootings Error Messages The instrument display error messages when the error occurs. Check and correspond to them correctly . %RROR-ESSAGES #AUSE 3OLUTION s  #ONNECTTHEPROBETOTHE 05,3/8IPROPERLY7HENUSING THEOPTIONAL%XTENSION#ABLE %#CONNECTTHEC ...

  • Konica Minolta PULSOX-300i - page 26

    24 Check Points s  #HECKTHATTHEPROBEISPROPERLY ATTACHED TOTHEPATIENT )FTHEPROBE ISPROPERLYATTACHEDBUTTHIS ME SSAG ES TIL LA PPEA RS TH EC IRCU LAT ION  INT HEARE ABEI NGMEA SURED MAYNO T BE GOOD -O VET HEPR OBE TOA NARE A ...

  • Konica Minolta PULSOX-300i - page 27

    25 Check Points %RROR-ESSAGES #AUSE 3OLUTION s  !TTACHTHEPROBETOTHEBODY CORRECTLY)FTHISMESSAGEIS DISPLAYEDWHENTHEUNITISATTACHED TOTHEPATIENTCORRECTLYTHE MEASUREMENTCONDITIONSARE REGARDEDASBLOODCIRCULATIONOR OTHERCIRCULATORYPROBLEMS? ...

  • Konica Minolta PULSOX-300i - page 28

    26 Check Points %RROR-ESSAGES #AUSE 3OLUTION 4HISINDICATESTHATTHEMEASUREMENT VALUEISOUTOFTHEGUARANTEED ACCURACYRANGE ・  4HEOXYGENSATURATION 3 P/  ISALUEBELOWTHE LOWERLIMITOFTHE MEASUREMENTRANGE4HE MEASUREDVALUE ...

  • Konica Minolta PULSOX-300i - page 29

    27 Check Points %RROR-ESSAGES #AUSE 3OLUTION s  4U R N T H E  0 OW E R  / FF   A N D T U R N  /.  AGAIN s  )FTHESEMESSAGEREAPPEAREVEN THOUGHTHEABOVEPOINTSHAVEBEEN CHECKEDTHEINSTRUMENTMAYBE MALFUNCTIONING#ONTACTTOTHE NEARESTDISTRIBUTEROR ...

  • Konica Minolta PULSOX-300i - page 30

    28 Check Points Maintenance and Inspection • Before using the instrument, make sure that there is no dam - age to the instrument, no damage or wire-breakage in the probe cable and the instrument operates correctly and safely . Cleaning • Dampen a soft cloth with neutral detergent or water , wipe the instrument with it, then wipe off carefully w ...

  • Konica Minolta PULSOX-300i - page 31

    29 Specications Specication ¢ Dual-wavelength pulse type (665nm/880nm) arterial blood oxygen satura- tion measuring instrument • Name: Oxygen Saturation Monitor PULSOX-300i ¢ Functions: • Measuring range: SpO 2 : 0 to 100% SpO 2 Pulse rate: 30 to 230 bpm • Accuracy: SpO 2 : ±2% SpO 2 (70 to 100% range, 1S.D.) Pulse rate: ±2 bp ...

  • Konica Minolta PULSOX-300i - page 32

    30 Specications ¢ Weight 56g (including battery/excluding wrist band and probes) ¢ Usable life 6 years [Veried by KONICA MINOL T A SENSING, INC. (based on own data)] Probes (SR-5C, SP-5C, LM-5C, SD-5C) ¢ LED-SPD probe ¢ T ype • Finger Clip Probe SR-5C • Spot Check Probe SP-5C • Monitor Probe LM-5C • Personal Probe SD-5 ...

  • Konica Minolta PULSOX-300i - page 33

    31 Appendix Appendix Calculation Method for Displayed V alues <Pulse level meter> The pulse level meter displays the transmitted light amount ratio calculated by the following equation. The pulse level is indicated in eight levels (0 to 15%, full scale if over 10%). <Oxygen saturation (SpO 2 )> Updates the moving average of the oxygen s ...

  • Konica Minolta PULSOX-300i - page 34

    32 Appendix EMC Guidance Guidance and manufactures declaration - electromagnetic emissions Guidance and manufactures declaration - electromagnetic immunity The Oxygen Saturation Monitor Model PULSO X-300i is intended for use in the electromagnetic environment specified below. The customer or the user of the Model PULSO X-300i should assure t ...

  • Konica Minolta PULSOX-300i - page 35

    33 Appendix Guidance and manufactures declaration - electromagnetic immunity The Oxygen Saturation Monitor Model PULSO X-300i is intended for use in the electromagnetic environment specified below. The customer or the user of the Model PULSO X-300i should assure that it is used in such anenvironment. Immunity test IEC 60601 T est level Complian ...

  • Konica Minolta PULSOX-300i - page 36

    34 Appendix ¢ Spectral Absorption of Hb and HbO 2 SpO 2 ＝  100 (% SpO 2 ) C（HbO 2 ） C（HbO 2 ） ＋C（Hb） Absorption coefficient Wa velength Red light Infrared light Measurement Principle This instrument measures the oxygen saturation (SpO 2 ) in arte - rial blood and pulse rate continuously in a non-invasive method by applying op ...

  • Konica Minolta PULSOX-300i - page 37

    35 Appendix Relation between Oxygen Saturation and Partial Pressure The relation between oxygen saturation (SpO 2 ) and oxygen partial pressure (PaO 2 ) is shown in the graph below. SpO 2 is the oxygen saturation as measured by pulse oximeters. ¢ Oxygen Saturation vs. Oxygen Partial Pressure The curve of the above graph may shift to the right o ...

  • Konica Minolta PULSOX-300i - page 38

    36 Appendix MEMO ...

  • Konica Minolta PULSOX-300i - page 39

    ...

  • Konica Minolta PULSOX-300i - page 40

    AJF AKK Printed in Japan 9222-1732-36 © 2007-2009 KONICA MINOL T A SENSING, INC. Manufacturer 3-91, Daisen-nishimachi, Sakai-ku, Sakai-shi, Osaka 590-8551, Japan ...

Produzent Konica Minolta Kategorie Oxygen Equipment

Dokumente, die wir vom Produzenten des Geräts Konica Minolta PULSOX-300i erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Konica Minolta
- Bedienungsanleitungen PULSOX-300i
- Produktkarten Konica Minolta
- Informationsbroschüren
- oder Energieetiketten Konica Minolta PULSOX-300i
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Konica Minolta PULSOX-300i.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Konica Minolta PULSOX-300i, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Konica Minolta PULSOX-300i. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Konica Minolta PULSOX-300i ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Konica Minolta PULSOX-300i, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Konica Minolta PULSOX-300i hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Konica Minolta PULSOX-300i verständlich ist.

Eine gänzliche Bedienungsanleitung von Konica Minolta sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Konica Minolta PULSOX-300i bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Konica Minolta PULSOX-300i befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Konica Minolta PULSOX-300i, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Konica Minolta PULSOX-300i - die uns die ersten Schritte während der Nutzung von Konica Minolta PULSOX-300i erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Konica Minolta PULSOX-300i hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Konica Minolta PULSOX-300i im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Konica Minolta PULSOX-300i?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Konica Minolta PULSOX-300i nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Konica Minolta PULSOX-300i hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)