Bedienungsanleitung Liebherr HC1011

14 Seiten 0.63 mb
Download

Zur Seite of 14

Summary
  • Liebherr HC1011 - page 1

    Installation Instructions Combined fridge-freezer for integrated use, door-on-door HC 1011/1060 HC 1001/1050 20/08 7084000 - 00 ...

  • Liebherr HC1011 - page 2

    Contents 1 General safety information ........................... 2 2 Setting up the appliance ............................... 2 3 Changing the door hinges ............................ 3 3.1 To detach the soft stop mechanism.................. 3 3.2 Reversing the door ........................................... 3 3.3 Re-attaching the soft stop mecha ...

  • Liebherr HC1011 - page 3

    u Examine the unit and packaging for shipping damage. Contact the carrier immediately if you suspect there is any damage. u Note the type (model, number), index, appliance/serial number, date of purchase and where purchased on the spaces provided in see Appliance Information. u Remove anything attached to the rear or side walls of appliance that wo ...

  • Liebherr HC1011 - page 4

    u Screw in ball stud Fig. 3 ( 3) together with the soft stop mechanism Fig. 3 ( 2) in the fastening hole. u Re-attach all covers Fig. 2 ( 5,6,7,8) . 4 Kitchen Cabinet Construction This is a fully integrated appliance which means that it is fully enclosed by a kitchen cabinet. This type of cabinet must be carefully constructed using the proper dimen ...

  • Liebherr HC1011 - page 5

    Fig. 6 u In the cabinet base, cut out a ventilation opening that is 17-23/32 in. ( 450 mm) in width and 2-7/32 in. (56 mm ) in height. u Insert ventilation grille Fig. 6 ( 3) into the cabinet base cut- out Fig. 6 ( 1) . u From the back side, slide the snap-fits Fig. 6 ( 2) into the grille until the hooks make contact with the cabinet base. u Comple ...

  • Liebherr HC1011 - page 6

    w The floor and side walls must be at right angles to each other. The joint between the upper and the lower kitchen cabinet door must align with the joint between the upper and lower appliance door. Follow distance L to the wall to allow the drawers to be pulled out properly. u Follow the dimensions provided in Fig. 6 . 4.3 Designing the Kitchen Ca ...

  • Liebherr HC1011 - page 7

    Fig. 7 1 Unit door fridge compartement 3 Fridge compartement door 2 Unit door freezer comparte- ment 4 Freezer compartement door The freezer door height is 24-24/32 in. (629 mm). u To cover the lower part of the appliance: increase the height of the panel to 27-3/32 in. (695 mm). The thickness of the floor board is usually 3/4 in. (19 mm). u To cov ...

  • Liebherr HC1011 - page 8

    u The total opening of the cabinet (i.e. 70-3/8 in. (1788 mm)) plus the thickness of the top as well as the floor board (usually 3/4 in. (19 mm )) minus the height of the freezer door panel (xxx in. (xxx mm)) as calculated above and subtract the width of the gap (approximately 1/8 in. (3 mm)): 70-3/8 in. + 3/4 in. + 3/4 in. - xxx in. - 1/8 in. = 71 ...

  • Liebherr HC1011 - page 9

    Note u Before assembling the unit door, make sure that the per- mitted weight for the unit doors is not exceeded. u Otherwise damage to the hinges and malfunctions aris- ing from this cannot be ruled out. Maximum weight of unit door Fridge compart- ment door 30.5 lbs (14 kg) Freezer compart- ment door 26.5 lbs (12 kg) 6.1 Assembling the appliance F ...

  • Liebherr HC1011 - page 10

    u Connect the IceMaker as indicated the section entitled Water Supply.* u Push the appliance 3/4 of the way into the recess. u Remove the covers ( 5,6,7) . u Screw Fig. 11 ( 61) the equal- izer trim Fig. 11 ( 20) to the ap- pliance through the oblong holes on top. Fig. 11 u Fasten all mounting brackets Fig. 12 ( 34) with hex head screws Fig. 12 ( 3 ...

  • Liebherr HC1011 - page 11

    u Slightly loosen the screws Fig. 20 ( 51) . u Secure the bottom mount- ing bracket Fig. 20 ( 50) to the unit wall with a ø4x19 chipboard screw Fig. 20 ( 29) . u Break off the protruding end of the cover Fig. 20 ( 53) . u Tighten the screws Fig. 20 ( 51) . u Place the cover Fig. 20 ( 54) into position on the bottom mounting bracket Fig. 20 ( 50) . ...

  • Liebherr HC1011 - page 12

    u To align the unit door in depth Z : Undo the screws Fig. 25 ( 36) at the top and the hex head screws Fig. 25 ( 35) at the bottom using the ring wrench Fig. 25 ( 37) supplied, then move the door. u Do not allow the knobs and sealing lips to come into contact with the door - im- portant for function! u Set an air gap of 3/32 '' (2 mm) bet ...

  • Liebherr HC1011 - page 13

    - We recommend using a dedicated circuit for this appli- ance to prevent electrical overload. - Follow all Federal, State and local electrical, fire and building codes and ordinances when installing the re- ceptacle and / or the appliance. - In some communities, a wall switch is required to turn power to the appliance ON and OFF. - To reduce the ri ...

  • Liebherr HC1011 - page 14

    Connecting the appliance 14 ...

Produzent Liebherr Kategorie Refrigerator

Dokumente, die wir vom Produzenten des Geräts Liebherr HC1011 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Liebherr
- Bedienungsanleitungen HC1011
- Produktkarten Liebherr
- Informationsbroschüren
- oder Energieetiketten Liebherr HC1011
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Liebherr HC1011.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Liebherr HC1011, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Liebherr HC1011. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Liebherr HC1011 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Liebherr HC1011, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Liebherr HC1011 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Liebherr HC1011 verständlich ist.

Eine gänzliche Bedienungsanleitung von Liebherr sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Liebherr HC1011 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Liebherr HC1011 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Liebherr HC1011, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Liebherr HC1011 - die uns die ersten Schritte während der Nutzung von Liebherr HC1011 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Liebherr HC1011 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Liebherr HC1011 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Liebherr HC1011?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Liebherr HC1011 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Liebherr HC1011 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)