English dropdown-ico

Manual Liebherr HC1011

14 pages 0.63 mb
Download

Go to site of 14

Summary
  • Liebherr HC1011 - page 1

    Installation Instructions Combined fridge-freezer for integrated use, door-on-door HC 1011/1060 HC 1001/1050 20/08 7084000 - 00 ...

  • Liebherr HC1011 - page 2

    Contents 1 General safety information ........................... 2 2 Setting up the appliance ............................... 2 3 Changing the door hinges ............................ 3 3.1 To detach the soft stop mechanism.................. 3 3.2 Reversing the door ........................................... 3 3.3 Re-attaching the soft stop mecha ...

  • Liebherr HC1011 - page 3

    u Examine the unit and packaging for shipping damage. Contact the carrier immediately if you suspect there is any damage. u Note the type (model, number), index, appliance/serial number, date of purchase and where purchased on the spaces provided in see Appliance Information. u Remove anything attached to the rear or side walls of appliance that wo ...

  • Liebherr HC1011 - page 4

    u Screw in ball stud Fig. 3 ( 3) together with the soft stop mechanism Fig. 3 ( 2) in the fastening hole. u Re-attach all covers Fig. 2 ( 5,6,7,8) . 4 Kitchen Cabinet Construction This is a fully integrated appliance which means that it is fully enclosed by a kitchen cabinet. This type of cabinet must be carefully constructed using the proper dimen ...

  • Liebherr HC1011 - page 5

    Fig. 6 u In the cabinet base, cut out a ventilation opening that is 17-23/32 in. ( 450 mm) in width and 2-7/32 in. (56 mm ) in height. u Insert ventilation grille Fig. 6 ( 3) into the cabinet base cut- out Fig. 6 ( 1) . u From the back side, slide the snap-fits Fig. 6 ( 2) into the grille until the hooks make contact with the cabinet base. u Comple ...

  • Liebherr HC1011 - page 6

    w The floor and side walls must be at right angles to each other. The joint between the upper and the lower kitchen cabinet door must align with the joint between the upper and lower appliance door. Follow distance L to the wall to allow the drawers to be pulled out properly. u Follow the dimensions provided in Fig. 6 . 4.3 Designing the Kitchen Ca ...

  • Liebherr HC1011 - page 7

    Fig. 7 1 Unit door fridge compartement 3 Fridge compartement door 2 Unit door freezer comparte- ment 4 Freezer compartement door The freezer door height is 24-24/32 in. (629 mm). u To cover the lower part of the appliance: increase the height of the panel to 27-3/32 in. (695 mm). The thickness of the floor board is usually 3/4 in. (19 mm). u To cov ...

  • Liebherr HC1011 - page 8

    u The total opening of the cabinet (i.e. 70-3/8 in. (1788 mm)) plus the thickness of the top as well as the floor board (usually 3/4 in. (19 mm )) minus the height of the freezer door panel (xxx in. (xxx mm)) as calculated above and subtract the width of the gap (approximately 1/8 in. (3 mm)): 70-3/8 in. + 3/4 in. + 3/4 in. - xxx in. - 1/8 in. = 71 ...

  • Liebherr HC1011 - page 9

    Note u Before assembling the unit door, make sure that the per- mitted weight for the unit doors is not exceeded. u Otherwise damage to the hinges and malfunctions aris- ing from this cannot be ruled out. Maximum weight of unit door Fridge compart- ment door 30.5 lbs (14 kg) Freezer compart- ment door 26.5 lbs (12 kg) 6.1 Assembling the appliance F ...

  • Liebherr HC1011 - page 10

    u Connect the IceMaker as indicated the section entitled Water Supply.* u Push the appliance 3/4 of the way into the recess. u Remove the covers ( 5,6,7) . u Screw Fig. 11 ( 61) the equal- izer trim Fig. 11 ( 20) to the ap- pliance through the oblong holes on top. Fig. 11 u Fasten all mounting brackets Fig. 12 ( 34) with hex head screws Fig. 12 ( 3 ...

  • Liebherr HC1011 - page 11

    u Slightly loosen the screws Fig. 20 ( 51) . u Secure the bottom mount- ing bracket Fig. 20 ( 50) to the unit wall with a ø4x19 chipboard screw Fig. 20 ( 29) . u Break off the protruding end of the cover Fig. 20 ( 53) . u Tighten the screws Fig. 20 ( 51) . u Place the cover Fig. 20 ( 54) into position on the bottom mounting bracket Fig. 20 ( 50) . ...

  • Liebherr HC1011 - page 12

    u To align the unit door in depth Z : Undo the screws Fig. 25 ( 36) at the top and the hex head screws Fig. 25 ( 35) at the bottom using the ring wrench Fig. 25 ( 37) supplied, then move the door. u Do not allow the knobs and sealing lips to come into contact with the door - im- portant for function! u Set an air gap of 3/32 '' (2 mm) bet ...

  • Liebherr HC1011 - page 13

    - We recommend using a dedicated circuit for this appli- ance to prevent electrical overload. - Follow all Federal, State and local electrical, fire and building codes and ordinances when installing the re- ceptacle and / or the appliance. - In some communities, a wall switch is required to turn power to the appliance ON and OFF. - To reduce the ri ...

  • Liebherr HC1011 - page 14

    Connecting the appliance 14 ...

Manufacturer Liebherr Category Refrigerator

Documents that we receive from a manufacturer of a Liebherr HC1011 can be divided into several groups. They are, among others:
- Liebherr technical drawings
- HC1011 manuals
- Liebherr product data sheets
- information booklets
- or energy labels Liebherr HC1011
All of them are important, but the most important information from the point of view of use of the device are in the user manual Liebherr HC1011.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Liebherr HC1011, service manual, brief instructions and user manuals Liebherr HC1011. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Liebherr HC1011.

Similar manuals

A complete manual for the device Liebherr HC1011, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Liebherr HC1011 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Liebherr HC1011.

A complete Liebherr manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Liebherr HC1011 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Liebherr HC1011, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Liebherr HC1011, that we can find in the current document
3. Tips how to use the basic functions of the device Liebherr HC1011 - which should help us in our first steps of using Liebherr HC1011
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Liebherr HC1011
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Liebherr HC1011 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Liebherr HC1011?

Use the form below

If you did not solve your problem by using a manual Liebherr HC1011, ask a question using the form below. If a user had a similar problem with Liebherr HC1011 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)