Bedienungsanleitung Whirlpool System II

14 Seiten 1.24 mb
Download

Zur Seite of 14

Summary
  • Whirlpool System II - page 1

    m 1 InstructionS WHIRLPOOL UNDERCOUNTER WATER FILTRATION SYSTEMS I, II, & Ill ...

  • Whirlpool System II - page 2

    Remove parts from packages. Check that you have all the parts. filtration assembly System I (A) filtration assembly System II (B) filtration assembly System III (C) filtration assembly cover (D) 2 mounting screws (E) VI” blue tubing (F) VI” orange tubing (G) 2-way grey connector with push-in saddle valve assembly (I) insert (J) plastic sleeve ( ...

  • Whirlpool System II - page 3

    Before You Start . . . IMPORTANT: Read and save these instructions. If you need assistance.. . It is recommended that this system be installed by a licensed plumber. Refer to the Use & Care information at the end of this booklet. If you need more help, It is the responsibility of the installer to comply with the the Whirlpool Consumer Assistanc ...

  • Whirlpool System II - page 4

    Instructions At A Glance l For detailed instructions see following page. 1. Turn off cold water supply. (St; la-lb) Electrical Shock Hazard Special care must be taken when drilling into water pipes. Some water may remain in water supply pipe: l If an electric drill is used, it must be properly grounded to prevent severe or lethal shock if water sho ...

  • Whirlpool System II - page 5

    Product Damage DO NOT connect to a hot water supply line. Failure to follow this instruction could result in product damage. la Take note of water requirements listed under . the Use & Care section of this booklet. The filtration system’s feed line (orange tubing) connects to your cold water supply line using the saddle valve. Do not use sadd ...

  • Whirlpool System II - page 6

    Instructions At A Glance l For detailed instructions see following page. 1. Decide if the system will be connected to your refrrgerator, to an optional faucet or to both. (Step 2a) 3. Or, insta!l faucet in sink and connect blue tubing to filtration assembly. (Steps 2d-2g) 2. Connect refrigerator’s water supply to filtration assembly with blue tub ...

  • Whirlpool System II - page 7

    2a You have three installation options: . 1 .Connect water supply from filtration system to refrigerator’s ice and water only. 2.Connect water supply from filtration system to optional sink faucet only. 3.Connect water supply from filtration system to both refrigerator and optional sink faucet. All parts are included with this kit to connect refr ...

  • Whirlpool System II - page 8

    Start Up Instructions At A Glance l For detailed instructions see following page. i . I 1. Slide filtration assembly onto mounting screws. (Steps 3a-3c) 2. Turn on cold water supply. (Step 3d) 3. If filtration assembly was connected to refrigerator, make and discard 2 batches of ice and drain 2-3 gallons of water from water dispenser. (Step 3e) 4. ...

  • Whirlpool System II - page 9

    Start Up Electrical Shock Hazard Special care must be taken when drilling into walls. Electrical wires may be concealed behind the wall covering: - Use only an electric drill with a 3-wire power supply cord connected to a grounded receptacle. l Check with qualified electrician if you are in doubt as to whether your electric drill is properly ground ...

  • Whirlpool System II - page 10

    Water Requirements The filtration system must be connected to a cold water supply line providing 30-l 00 psi water pressure. The water temperature must be between 40”-100°F. Community or private well water must be potable (suitable for drinking). Personal Injury Hazard DO NOT use water filtration system if water is microbiologically unsafe or wa ...

  • Whirlpool System II - page 11

    Call l-800-253-1301 to order. Replacement Parts & Accessories System I Replacement Cartridge Kit Kit includes Sediment/Carbon (SC) Cartridge 4373529 System II Replacement Cartridges Kii Kit includes Lead Reduction (L) and Carbon Filter (CF) Cartridges. Cartridges can also be ordered individually. 4373573 System Ill Replacement Cartridge Kit Kit ...

  • Whirlpool System II - page 12

    Performance Data Sheet 0 NSF This product has been tested and listed by NSF International under B Standard 42 for Taste, Odor and Chlorine reduction (Class I) and This product has been tested and listed by NSF International under Standard 42 Particulate reduction (Class II). 0 NSF B for Taste, Odor and Chlorine reduction (Class I) and Particulate r ...

  • Whirlpool System II - page 13

    Performance Data Sheet This product has been tested and listed by NSF International under Standard 42 for Taste, Odor and Chlorine reduction (Class I) and Particulate reduction (Class II) and under Standard 53 for Cyst, Turbidity, Lead and VOC reduction. Whirlpool Water Filtration System Ill SPECIFICATIONS: Lead, VOC and Taste/Odor/Chlorine reducti ...

  • Whirlpool System II - page 14

    Part No. 4373576 01993 Whirlpool Corporation - Whirlpool Corporation Benton Harbor. Ml 49022 CB Printed on Recycled Paper in U.S.A. ...

Produzent Whirlpool Kategorie Water Dispenser

Dokumente, die wir vom Produzenten des Geräts Whirlpool System II erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Whirlpool
- Bedienungsanleitungen System II
- Produktkarten Whirlpool
- Informationsbroschüren
- oder Energieetiketten Whirlpool System II
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Whirlpool System II.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Whirlpool System II, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Whirlpool System II. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Whirlpool System II ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Whirlpool System II, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Whirlpool System II hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Whirlpool System II verständlich ist.

Eine gänzliche Bedienungsanleitung von Whirlpool sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Whirlpool System II bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Whirlpool System II befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Whirlpool System II, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Whirlpool System II - die uns die ersten Schritte während der Nutzung von Whirlpool System II erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Whirlpool System II hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Whirlpool System II im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Whirlpool System II?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Whirlpool System II nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Whirlpool System II hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)