Bedienungsanleitung Liebherr 7084284-03

18 Seiten 0.79 mb
Download

Zur Seite of 18

Summary
  • Liebherr 7084284-03 - page 1

    Operating and installation instructions Combined fridge-freezer for integrated use, door-on-door 070711 7084284 - 03 IC/ICN/SICN/ICP ... 6 ...

  • Liebherr 7084284-03 - page 2

    Contents 1 Appliance at a glance ............................................ 2 1.1 Description of appliance and equipment .................. 2 1.2 Range of appliance use ............................................ 2 1.3 Conformity ................................................................ 3 1.4 Saving energy ................................ ...

  • Liebherr 7084284-03 - page 3

    Note u Compliance with the ambient temperatures indicated is required, otherwise the cooling performance is reduced. Climate rating for ambient temperatures of SN 10 °C to 32 °C N 16 °C to 32 °C ST 16 °C to 38 °C T 16 °C to 43 °C 1.3 Conformity The refrigerant circuit has been tested for leaks. When installed, this appliance complies with t ...

  • Liebherr 7084284-03 - page 4

    3 Controls and displays 3.1 Operating and control elements Fig. 2 (1) Alarm button (8) Child-proofing symbol (2) SuperFrost button (9) Down setting button, refrigerator compartment (3) On/Off button, freezer compartment (10) Up setting button, refriger- ator compartment (4) Down setting button, freezer compartment (11) On/Off button, refrigerator c ...

  • Liebherr 7084284-03 - page 5

    u Unscrew the red transport lock. Close the vacated retaining hole using the stopper (60). u Dispose of packaging material (see 4.6) . Note u Clean the appliance (see 6.3) . If the appliance is installed in a very damp environment, condensate may form on the outside of the appliance. u Always see to good ventilation at the installation site. 4.3 Ch ...

  • Liebherr 7084284-03 - page 6

    4.4 Water connection* WARNING Danger of electric shock! u Disconnect the appliance by unplugging it before you connect it to the water line. u Shut off the water supply before you connect the water feed lines of the IceMaker. u The connection to the drinking water system may be carried out only by a qualified gas fitter and plumber. WARNING Risk of ...

  • Liebherr 7084284-03 - page 7

    Fig. 7 4.5.1 Installing the appliance Fig. 8 u Detach the connecting cable from the rear of the appli- ance. Remove the cable holder otherwise there will be vibratory noise. u Lay the connecting cable with the help of string in such a way that the appliance can be easily connected following installation. Fig. 9 For appliances with permanently plumb ...

  • Liebherr 7084284-03 - page 8

    u Fit the equaliser trim Fig. 10 (20) concentri- cally onto the appliance: Slide it into the recess and engage it in the keyholes. Fig. 10 u Screw all the mounting brackets Fig. 11 (34) to the pre-drilled holes in the appliance door using hexagon screws Fig. 11 (35) . Fig. 11 For 16 mm -thick unit walls = 568 mm-wide recess: u Clip spacer Fig. 12 ( ...

  • Liebherr 7084284-03 - page 9

    The fitting aids Fig. 20 (30) are required for both doors. Therefore fit the unit doors one after the other . u Check 8 mm-presetting. (Distance between appliance door and lower edge of crosspiece) u Slide up the assembly aids Fig. 20 (30) to the height of the unit door. Lower stop edge ▲of the assembly aid = upper edge of the unit door to be fit ...

  • Liebherr 7084284-03 - page 10

    u Put on and engage the covers Fig. 8 (5,6,7) . For appliances without soft stop mechanism adjust door stop cushioning: The door stop cushioning can be adjusted if necessary using the accompanying Allen key:* u For stronger spring force: turn clockwise.* u For lesser spring force (as-deliv- ered): turn anticlockwise.* u Attach the remaining covers ...

  • Liebherr 7084284-03 - page 11

    w The display indicates c . w The button SuperFrost flashes. u Briefly press the SuperFrost button Fig. 2 (2) to confirm. u To switch on: Using the Up setting button, freezer compartment Fig. 2 (5) or Down setting button, freezer compartment Fig. 2 (4) , select c1 . u To switch off: Using the Up setting button, freezer compartment Fig. 2 (5) or Dow ...

  • Liebherr 7084284-03 - page 12

    - at high room temperature (above33 °C ) - at high humidity The forced-air cooling uses slightly more energy. To save energy, the fan switches off automatically when the door is open. Switching on the fan* u Briefly press the fan button Fig. 2 (13) . w The fan button shines. w The fan is active. It switches on automatically when the compressor run ...

  • Liebherr 7084284-03 - page 13

    5.6.3 Setting the temperature in the freezer compartment The appliance is pre-set for normal operation. The temperature can be set between -16 °C and -26 °C / Australia model -14 °C and -26 °C, the recommended tempera- ture is -18 °C. u To set the temperature higher: press Up button, freezer compartment Fig. 2 (5) . u To set the temperature lo ...

  • Liebherr 7084284-03 - page 14

    Using cold storage accumulators* u Freeze and store the cold storage accumu- lators in the ceiling of the freezer compart- ment (appliances without No-Frost module). With the top drawer removed: u to insert cold storage accu- mulators: slide cold storage accumulator into the top back of the freezer compartment ceiling and snap into place at the fro ...

  • Liebherr 7084284-03 - page 15

    u Pay attention that the defrost water does not run into the kitchen unit. u If necessary, pick up defrost water several times, using a sponge or cloth. u Clean the appliance (see 6.3) and rub dry. 6.2 Defrosting with NoFrost* The NoFrost system automatically defrosts the appliance. Refrigerator compartment: The defrost water evaporates due to the ...

  • Liebherr 7084284-03 - page 16

    u Clip the back end of the cover in and clip the sides into place. 6.6 Customer service First check whether you can correct the fault yourself by refer- ence to the list (see Malfunction). If this is not the case, please contact the customer service whose address is given in the enclosed customer service list. WARNING Risk of injury if repair work ...

  • Liebherr 7084284-03 - page 17

    → Insufficient ventilation. u Clear ventilation grilles. → The ambient temperature is too high. u Solution: (see 1.2) . → The appliance was opened too frequently or for too long. u Wait until the appliance reaches the required temperature itself. If not, contact the customer service. (see Mainte- nance). → Too much fresh food was placed ins ...

  • Liebherr 7084284-03 - page 18

    Disposing of the appliance 18 ...

Produzent Liebherr Kategorie Refrigerator

Dokumente, die wir vom Produzenten des Geräts Liebherr 7084284-03 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Liebherr
- Bedienungsanleitungen 7084284-03
- Produktkarten Liebherr
- Informationsbroschüren
- oder Energieetiketten Liebherr 7084284-03
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Liebherr 7084284-03.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Liebherr 7084284-03, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Liebherr 7084284-03. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Liebherr 7084284-03 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Liebherr 7084284-03, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Liebherr 7084284-03 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Liebherr 7084284-03 verständlich ist.

Eine gänzliche Bedienungsanleitung von Liebherr sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Liebherr 7084284-03 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Liebherr 7084284-03 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Liebherr 7084284-03, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Liebherr 7084284-03 - die uns die ersten Schritte während der Nutzung von Liebherr 7084284-03 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Liebherr 7084284-03 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Liebherr 7084284-03 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Liebherr 7084284-03?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Liebherr 7084284-03 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Liebherr 7084284-03 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)